+// SPDX-License-Identifier: GPL-2.0
/*
* Copyright 2008 Extreme Engineering Solutions, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
/*
static struct pca953x_chip_ngpio pca953x_chip_ngpios[] =
CONFIG_SYS_I2C_PCA953X_WIDTH;
-#define NUM_CHIP_GPIOS (sizeof(pca953x_chip_ngpios) / \
- sizeof(struct pca953x_chip_ngpio))
-
/*
* Determine the number of GPIO pins supported. If we don't know we assume
* 8 pins.
{
int i;
- for (i = 0; i < NUM_CHIP_GPIOS; i++)
+ for (i = 0; i < ARRAY_SIZE(pca953x_chip_ngpios); i++)
if (pca953x_chip_ngpios[i].chip == chip)
return pca953x_chip_ngpios[i].ngpio;
if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
return -1;
+ valw = le16_to_cpu(valw);
valw &= ~mask;
valw |= data;
+ valw = cpu_to_le16(valw);
return i2c_write(chip, addr << 1, 1, (u8*)&valw, 2);
}
} else {
if (i2c_read(chip, addr << 1, 1, (u8*)&valw, 2))
return -1;
- *data = (int)valw;
+ *data = (uint)le16_to_cpu(valw);
}
return 0;
}
return (int)val;
}
-#ifdef CONFIG_CMD_PCA953X
-#ifdef CONFIG_CMD_PCA953X_INFO
+#if defined(CONFIG_CMD_PCA953X) && !defined(CONFIG_SPL_BUILD)
/*
* Display pca953x information
*/
return 0;
}
-#endif /* CONFIG_CMD_PCA953X_INFO */
-cmd_tbl_t cmd_pca953x[] = {
+static cmd_tbl_t cmd_pca953x[] = {
U_BOOT_CMD_MKENT(device, 3, 0, (void *)PCA953X_CMD_DEVICE, "", ""),
U_BOOT_CMD_MKENT(output, 4, 0, (void *)PCA953X_CMD_OUTPUT, "", ""),
U_BOOT_CMD_MKENT(input, 3, 0, (void *)PCA953X_CMD_INPUT, "", ""),
U_BOOT_CMD_MKENT(invert, 4, 0, (void *)PCA953X_CMD_INVERT, "", ""),
-#ifdef CONFIG_CMD_PCA953X_INFO
U_BOOT_CMD_MKENT(info, 2, 0, (void *)PCA953X_CMD_INFO, "", ""),
-#endif
};
-int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_pca953x(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
static uint8_t chip = CONFIG_SYS_I2C_PCA953X_ADDR;
int ret = CMD_RET_USAGE, val;
/* All commands but "device" require 'maxargs' arguments */
if (!c || !((argc == (c->maxargs)) ||
- (((int)c->cmd == PCA953X_CMD_DEVICE) &&
+ (((long)c->cmd == PCA953X_CMD_DEVICE) &&
(argc == (c->maxargs - 1))))) {
return CMD_RET_USAGE;
}
if (argc > 3)
ul_arg3 = simple_strtoul(argv[3], NULL, 16) & 0x1;
- switch ((int)c->cmd) {
-#ifdef CONFIG_CMD_PCA953X_INFO
+ switch ((long)c->cmd) {
case PCA953X_CMD_INFO:
ret = pca953x_info(chip);
if (ret)
ret = CMD_RET_FAILURE;
break;
-#endif
case PCA953X_CMD_DEVICE:
if (argc == 3)
"pca953x gpio access",
"device [dev]\n"
" - show or set current device address\n"
-#ifdef CONFIG_CMD_PCA953X_INFO
"pca953x info\n"
" - display info for current chip\n"
-#endif
"pca953x output pin 0|1\n"
" - set pin as output and drive low or high\n"
"pca953x invert pin 0|1\n"