libfdt: move working_fdt and FDT_RAMDISK_OVERHEAD to include/libfdt.h

[u-boot] / drivers / i2c / mxc_i2c.c

diff --git a/drivers/i2c/mxc_i2c.c b/drivers/i2c/mxc_i2c.c
index abf1da2ae3ee846cc8b4a88cd662fe5a8edd55a5..79228c2757bde2944e0e4601374806cace55f179 100644 (file)
--- a/drivers/i2c/mxc_i2c.c
+++ b/drivers/i2c/mxc_i2c.c
@@ -317,16 +317,19 @@ static int i2c_init_transfer_(struct mxc_i2c_bus *i2c_bus, u8 chip,
        temp |= I2CR_MTX | I2CR_TX_NO_AK;
        writeb(temp, base + (I2CR << reg_shift));
 
-       /* write slave address */
-       ret = tx_byte(i2c_bus, chip << 1);
-       if (ret < 0)
-               return ret;
-
-       while (alen--) {
-               ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff);
+       if (alen >= 0)  {
+               /* write slave address */
+               ret = tx_byte(i2c_bus, chip << 1);
                if (ret < 0)
                        return ret;
+
+               while (alen--) {
+                       ret = tx_byte(i2c_bus, (addr >> (alen * 8)) & 0xff);
+                       if (ret < 0)
+                               return ret;
+               }
        }
+
        return 0;
 }
 
@@ -537,9 +540,11 @@ static int bus_i2c_read(struct mxc_i2c_bus *i2c_bus, u8 chip, u32 addr,
        if (ret < 0)
                return ret;
 
-       temp = readb(base + (I2CR << reg_shift));
-       temp |= I2CR_RSTA;
-       writeb(temp, base + (I2CR << reg_shift));
+       if (alen >= 0) {
+               temp = readb(base + (I2CR << reg_shift));
+               temp |= I2CR_RSTA;
+               writeb(temp, base + (I2CR << reg_shift));
+       }
 
        ret = tx_byte(i2c_bus, (chip << 1) | 1);
        if (ret < 0) {
@@ -779,9 +784,9 @@ static int mxc_i2c_probe(struct udevice *bus)
                ret2 = gpio_request_by_name_nodev(offset_to_ofnode(node),
                                "sda-gpios", 0, &i2c_bus->sda_gpio,
                                GPIOD_IS_OUT);
-               if (!dm_gpio_is_valid(&i2c_bus->sda_gpio) |
-                   !dm_gpio_is_valid(&i2c_bus->scl_gpio) |
-                   ret | ret2) {
+               if (!dm_gpio_is_valid(&i2c_bus->sda_gpio) ||
+                   !dm_gpio_is_valid(&i2c_bus->scl_gpio) ||
+                   ret || ret2) {
                        dev_err(dev, "i2c bus %d at %lu, fail to request scl/sda gpio\n", bus->seq, i2c_bus->base);
                        return -EINVAL;
                }