* There are so many options that it would be difficult to document
* each bit. We mostly use the default or recommended settings.
*/
-static const char i82557_config_cmd[] = {
- 22, 0x08, 0, 0, 0, 0, 0x32, 0x03, 1, /* 1=Use MII 0=Use AUI */
- 0, 0x2E, 0, 0x60, 0,
- 0xf2, 0x48, 0, 0x40, 0xf2, 0x80, /* 0x40=Force full-duplex */
- 0x3f, 0x05,
-};
static const char i82558_config_cmd[] = {
22, 0x08, 0, 1, 0, 0, 0x22, 0x03, 1, /* 1=Use MII 0=Use AUI */
0, 0x2E, 0, 0x60, 0x08, 0x88,
static inline int INW (struct eth_device *dev, u_long addr)
{
- return le16_to_cpu (*(volatile u16 *) (addr + dev->iobase));
+ return le16_to_cpu(*(volatile u16 *)(addr + (u_long)dev->iobase));
}
static inline void OUTW (struct eth_device *dev, int command, u_long addr)
{
- *(volatile u16 *) ((addr + dev->iobase)) = cpu_to_le16 (command);
+ *(volatile u16 *)((addr + (u_long)dev->iobase)) = cpu_to_le16(command);
}
static inline void OUTL (struct eth_device *dev, int command, u_long addr)
{
- *(volatile u32 *) ((addr + dev->iobase)) = cpu_to_le32 (command);
+ *(volatile u32 *)((addr + (u_long)dev->iobase)) = cpu_to_le32(command);
}
#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII)
static inline int INL (struct eth_device *dev, u_long addr)
{
- return le32_to_cpu (*(volatile u32 *) (addr + dev->iobase));
+ return le32_to_cpu(*(volatile u32 *)(addr + (u_long)dev->iobase));
}
static int get_phyreg (struct eth_device *dev, unsigned char addr,
return dev;
}
-static int eepro100_miiphy_read(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short *value)
+static int eepro100_miiphy_read(struct mii_dev *bus, int addr, int devad,
+ int reg)
{
+ unsigned short value = 0;
struct eth_device *dev;
- dev = verify_phyaddr(devname, addr);
+ dev = verify_phyaddr(bus->name, addr);
if (dev == NULL)
return -1;
- if (get_phyreg(dev, addr, reg, value) != 0) {
- printf("%s: mii read timeout!\n", devname);
+ if (get_phyreg(dev, addr, reg, &value) != 0) {
+ printf("%s: mii read timeout!\n", bus->name);
return -1;
}
- return 0;
+ return value;
}
-static int eepro100_miiphy_write(const char *devname, unsigned char addr,
- unsigned char reg, unsigned short value)
+static int eepro100_miiphy_write(struct mii_dev *bus, int addr, int devad,
+ int reg, u16 value)
{
struct eth_device *dev;
- dev = verify_phyaddr(devname, addr);
+ dev = verify_phyaddr(bus->name, addr);
if (dev == NULL)
return -1;
if (set_phyreg(dev, addr, reg, value) != 0) {
- printf("%s: mii write timeout!\n", devname);
+ printf("%s: mii write timeout!\n", bus->name);
return -1;
}
#if defined (CONFIG_MII) || defined(CONFIG_CMD_MII)
/* register mii command access routines */
- miiphy_register(dev->name,
- eepro100_miiphy_read, eepro100_miiphy_write);
+ int retval;
+ struct mii_dev *mdiodev = mdio_alloc();
+ if (!mdiodev)
+ return -ENOMEM;
+ strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN);
+ mdiodev->read = eepro100_miiphy_read;
+ mdiodev->write = eepro100_miiphy_write;
+
+ retval = mdio_register(mdiodev);
+ if (retval < 0)
+ return retval;
#endif
card_number++;