* (the hubs) have this as parent data. Hubs are children of controllers or
* other hubs and there is always a single root hub for each controller.
* Therefore struct usb_device can always be accessed with
- * dev_get_parentdata(dev), where dev is a USB device.
+ * dev_get_parent_priv(dev), where dev is a USB device.
*
* Pointers exist for obtaining both the device (could be any uclass) and
* controller (UCLASS_USB) from this structure. The controller does not have
int string_langid; /* language ID for strings */
int (*irq_handle)(struct usb_device *dev);
unsigned long irq_status;
- int irq_act_len; /* transfered bytes */
+ int irq_act_len; /* transferred bytes */
void *privptr;
/*
* Child devices - if this is a hub device
*/
unsigned long status;
unsigned long int_pending; /* 1 bit per ep, used by int_queue */
- int act_len; /* transfered bytes */
+ int act_len; /* transferred bytes */
int maxchild; /* Number of ports if hub */
int portnr; /* Port number, 1=first */
#ifndef CONFIG_DM_USB
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);
-#if defined(CONFIG_MUSB_HOST) || defined(CONFIG_DM_USB)
+#if defined(CONFIG_USB_MUSB_HOST) || defined(CONFIG_DM_USB)
int usb_reset_root_port(struct usb_device *dev);
#else
#define usb_reset_root_port(dev)
int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer,
int transfer_len, int interval);
-#if defined CONFIG_USB_EHCI || defined CONFIG_MUSB_HOST || defined(CONFIG_DM_USB)
+#if defined CONFIG_USB_EHCI || defined CONFIG_USB_MUSB_HOST || defined(CONFIG_DM_USB)
struct int_queue *create_int_queue(struct usb_device *dev, unsigned long pipe,
int queuesize, int elementsize, void *buffer, int interval);
int destroy_int_queue(struct usb_device *dev, struct int_queue *queue);
#ifdef CONFIG_USB_STORAGE
-#define USB_MAX_STOR_DEV 5
-block_dev_desc_t *usb_stor_get_dev(int index);
+#define USB_MAX_STOR_DEV 7
int usb_stor_scan(int mode);
int usb_stor_info(void);
void *buffer, int transfer_len, int interval);
int usb_disable_asynch(int disable);
int usb_maxpacket(struct usb_device *dev, unsigned long pipe);
-int usb_get_configuration_no(struct usb_device *dev, unsigned char *buffer,
- int cfgno);
+int usb_get_configuration_no(struct usb_device *dev, int cfgno,
+ unsigned char *buffer, int length);
+int usb_get_configuration_len(struct usb_device *dev, int cfgno);
int usb_get_report(struct usb_device *dev, int ifnum, unsigned char type,
unsigned char id, void *buf, int size);
int usb_get_class_descriptor(struct usb_device *dev, int ifnum,
struct usb_hub_device {
struct usb_device *pusb_dev;
struct usb_hub_descriptor desc;
+
+ ulong connect_timeout; /* Device connection timeout in ms */
+ ulong query_delay; /* Device query delay in ms */
+ int overcurrent_count[USB_MAXCHILDREN]; /* Over-current counter */
};
#ifdef CONFIG_DM_USB
int hub_port_reset(struct udevice *dev, int port, unsigned short *portstat);
+/*
+ * usb_find_usb2_hub_address_port() - Get hub address and port for TT setting
+ *
+ * Searches for the first HS hub above the given device. If a
+ * HS hub is found, the hub address and the port the device is
+ * connected to is return, as required for SPLIT transactions
+ *
+ * @param: udev full speed or low speed device
+ */
+void usb_find_usb2_hub_address_port(struct usb_device *udev,
+ uint8_t *hub_address, uint8_t *hub_port);
+
/**
* usb_alloc_new_device() - Allocate a new device
*
int usb_emul_bulk(struct udevice *emul, struct usb_device *udev,
unsigned long pipe, void *buffer, int length);
+/**
+ * usb_emul_int() - Send an interrupt packet to an emulator
+ *
+ * @emul: Emulator device
+ * @udev: USB device (which the emulator is causing to appear)
+ * See struct dm_usb_ops for details on other parameters
+ * @return 0 if OK, -ve on error
+ */
+int usb_emul_int(struct udevice *emul, struct usb_device *udev,
+ unsigned long pipe, void *buffer, int length, int interval);
+
/**
* usb_emul_find() - Find an emulator for a particular device
*
*/
int usb_emul_find(struct udevice *bus, ulong pipe, struct udevice **emulp);
+/**
+ * usb_emul_find_for_dev() - Find an emulator for a particular device
+ *
+ * @bus: USB bus (controller)
+ * @dev: USB device to check
+ * @emulp: Returns pointer to emulator, or NULL if not found
+ * @return 0 if found, -ve on error
+ */
+int usb_emul_find_for_dev(struct udevice *dev, struct udevice **emulp);
+
/**
* usb_emul_reset() - Reset all emulators ready for use
*
*/
void usb_emul_reset(struct udevice *dev);
+/**
+ * usb_show_tree() - show the USB device tree
+ *
+ * This shows a list of active USB devices along with basic information about
+ * each.
+ */
+void usb_show_tree(void);
+
#endif /*_USB_H_ */