* IT8758E Super I/O chip w/LPC interface
* IT8771E Super I/O chip w/LPC interface
* IT8772E Super I/O chip w/LPC interface
+ * IT8781F Super I/O chip w/LPC interface
* IT8782F Super I/O chip w/LPC interface
* IT8783E/F Super I/O chip w/LPC interface
* Sis950 A clone of the IT8705F
#define DRVNAME "it87"
enum chips { it87, it8712, it8716, it8718, it8720, it8721, it8728, it8771,
- it8772, it8782, it8783, it8603 };
+ it8772, it8781, it8782, it8783, it8603 };
static unsigned short force_id;
module_param(force_id, ushort, 0);
#define IT8728F_DEVID 0x8728
#define IT8771E_DEVID 0x8771
#define IT8772E_DEVID 0x8772
+#define IT8781F_DEVID 0x8781
#define IT8782F_DEVID 0x8782
#define IT8783E_DEVID 0x8783
#define IT8603E_DEVID 0x8603
#define FEAT_TEMP_OFFSET (1 << 4)
#define FEAT_TEMP_PECI (1 << 5)
#define FEAT_TEMP_OLD_PECI (1 << 6)
+#define FEAT_FAN16_CONFIG (1 << 7) /* Need to enable 16-bit fans */
+#define FEAT_FIVE_FANS (1 << 8) /* Supports five fans */
+#define FEAT_VID (1 << 9) /* Set if chip supports VID */
static const struct it87_devices it87_devices[] = {
[it87] = {
.name = "it87",
- .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
+ .features = FEAT_OLD_AUTOPWM | FEAT_FAN16_CONFIG,
+ /* may need to overwrite */
},
[it8712] = {
.name = "it8712",
- .features = FEAT_OLD_AUTOPWM, /* may need to overwrite */
+ .features = FEAT_OLD_AUTOPWM | FEAT_FAN16_CONFIG | FEAT_VID,
+ /* may need to overwrite */
},
[it8716] = {
.name = "it8716",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET,
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
},
[it8718] = {
.name = "it8718",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
.old_peci_mask = 0x4,
},
[it8720] = {
.name = "it8720",
- .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET | FEAT_VID
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
.old_peci_mask = 0x4,
},
[it8721] = {
.name = "it8721",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI,
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_OLD_PECI | FEAT_TEMP_PECI
+ | FEAT_FAN16_CONFIG | FEAT_FIVE_FANS,
.peci_mask = 0x05,
.old_peci_mask = 0x02, /* Actually reports PCH */
},
[it8728] = {
.name = "it8728",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
- | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
+ | FEAT_TEMP_OFFSET | FEAT_TEMP_PECI | FEAT_FIVE_FANS,
.peci_mask = 0x07,
},
[it8771] = {
.name = "it8771",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
- /* PECI: guesswork */
- /* 12mV ADC (OHM) */
- /* 16 bit fans (OHM) */
+ /* PECI: guesswork */
+ /* 12mV ADC (OHM) */
+ /* 16 bit fans (OHM) */
+ /* three fans, always 16 bit (guesswork) */
.peci_mask = 0x07,
},
[it8772] = {
.name = "it8772",
.features = FEAT_NEWER_AUTOPWM | FEAT_12MV_ADC | FEAT_16BIT_FANS
| FEAT_TEMP_OFFSET | FEAT_TEMP_PECI,
- /* PECI (coreboot) */
- /* 12mV ADC (HWSensors4, OHM) */
- /* 16 bit fans (HWSensors4, OHM) */
+ /* PECI (coreboot) */
+ /* 12mV ADC (HWSensors4, OHM) */
+ /* 16 bit fans (HWSensors4, OHM) */
+ /* three fans, always 16 bit (datasheet) */
.peci_mask = 0x07,
},
+ [it8781] = {
+ .name = "it8781",
+ .features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
+ .old_peci_mask = 0x4,
+ },
[it8782] = {
.name = "it8782",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
.old_peci_mask = 0x4,
},
[it8783] = {
.name = "it8783",
.features = FEAT_16BIT_FANS | FEAT_TEMP_OFFSET
- | FEAT_TEMP_OLD_PECI,
+ | FEAT_TEMP_OLD_PECI | FEAT_FAN16_CONFIG,
.old_peci_mask = 0x4,
},
[it8603] = {
#define has_temp_old_peci(data, nr) \
(((data)->features & FEAT_TEMP_OLD_PECI) && \
((data)->old_peci_mask & (1 << nr)))
+#define has_fan16_config(data) (has_16bit_fans(data) && \
+ ((data)->features & FEAT_FAN16_CONFIG))
+#define has_five_fans(data) ((data)->features & FEAT_FIVE_FANS)
+#define has_vid(data) ((data)->features & FEAT_VID)
struct it87_sio_data {
enum chips type;
case IT8772E_DEVID:
sio_data->type = it8772;
break;
+ case IT8781F_DEVID:
+ sio_data->type = it8781;
+ break;
case IT8782F_DEVID:
sio_data->type = it8782;
break;
if (sio_data->type != it8603)
sio_data->skip_in |= (1 << 9);
- /* Read GPIO config and VID value from LDN 7 (GPIO) */
- if (sio_data->type == it87) {
- /* The IT8705F doesn't have VID pins at all */
+ if (!(it87_devices[sio_data->type].features & FEAT_VID))
sio_data->skip_vid = 1;
+ /* Read GPIO config and VID value from LDN 7 (GPIO) */
+ if (sio_data->type == it87) {
/* The IT8705F has a different LD number for GPIO */
superio_select(5);
sio_data->beep_pin = superio_inb(IT87_SIO_BEEP_PIN_REG) & 0x3f;
} else if (sio_data->type == it8783) {
int reg25, reg27, reg2a, reg2c, regef;
- sio_data->skip_vid = 1; /* No VID */
-
superio_select(GPIO);
reg25 = superio_inb(IT87_SIO_GPIO1_REG);
} else if (sio_data->type == it8603) {
int reg27, reg29;
- sio_data->skip_vid = 1; /* No VID */
superio_select(GPIO);
reg27 = superio_inb(IT87_SIO_GPIO3_REG);
superio_select(GPIO);
reg = superio_inb(IT87_SIO_GPIO3_REG);
- if (sio_data->type == it8721 || sio_data->type == it8728 ||
- sio_data->type == it8771 || sio_data->type == it8772 ||
- sio_data->type == it8782) {
- /*
- * IT8721F/IT8758E, and IT8782F don't have VID pins
- * at all, not sure about the IT8728F and compatibles.
- */
- sio_data->skip_vid = 1;
- } else {
+ if (!sio_data->skip_vid) {
/* We need at least 4 VID pins */
if (reg & 0x0f) {
pr_info("VID is disabled (pins used for GPIO)\n");
if (reg & (1 << 2))
sio_data->skip_fan |= (1 << 1);
- if ((sio_data->type == it8718 || sio_data->type == it8720)
- && !(sio_data->skip_vid))
+ if (!sio_data->skip_vid)
sio_data->vid_value = superio_inb(IT87_SIO_VID_REG);
reg = superio_inb(IT87_SIO_PINX2_REG);
case it8712:
if (sio_data->revision >= 0x08) {
data->features &= ~FEAT_OLD_AUTOPWM;
- data->features |= FEAT_16BIT_FANS;
+ data->features |= FEAT_16BIT_FANS | FEAT_FIVE_FANS;
}
break;
default:
data->in_scaled |= (1 << 8); /* in8 is Vbat */
if (sio_data->internal & (1 << 3))
data->in_scaled |= (1 << 9); /* in9 is AVCC */
- } else if (sio_data->type == it8782 || sio_data->type == it8783) {
+ } else if (sio_data->type == it8781 || sio_data->type == it8782 ||
+ sio_data->type == it8783) {
if (sio_data->internal & (1 << 0))
data->in_scaled |= (1 << 3); /* in3 is VCC5V */
if (sio_data->internal & (1 << 1))
}
data->has_fan = (data->fan_main_ctrl >> 4) & 0x07;
- /* Set tachometers to 16-bit mode if needed, IT8603E (and IT8728F?)
- * has it by default */
- if (has_16bit_fans(data) && data->type != it8603) {
+ /* Set tachometers to 16-bit mode if needed. */
+ if (has_fan16_config(data)) {
tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
if (~tmp & 0x07 & data->has_fan) {
dev_dbg(&pdev->dev,
it87_write_value(data, IT87_REG_FAN_16BIT,
tmp | 0x07);
}
- /* IT8705F, IT8782F, and IT8783E/F only support three fans. */
- if (data->type != it87 && data->type != it8782 &&
- data->type != it8783) {
- if (tmp & (1 << 4))
- data->has_fan |= (1 << 3); /* fan4 enabled */
- if (tmp & (1 << 5))
- data->has_fan |= (1 << 4); /* fan5 enabled */
- }
+ }
+
+ /* Check for additional fans */
+ if (has_five_fans(data)) {
+ tmp = it87_read_value(data, IT87_REG_FAN_16BIT);
+ if (tmp & (1 << 4))
+ data->has_fan |= (1 << 3); /* fan4 enabled */
+ if (tmp & (1 << 5))
+ data->has_fan |= (1 << 4); /* fan5 enabled */
}
/* Fan input pins may be used for alternative functions */
projects / groeck-it87 / blobdiff