#include <common.h>
#include <command.h>
#include <malloc.h>
-#include <devices.h>
+#include <stdio_dev.h>
#include <timestamp.h>
#include <version.h>
#include <net.h>
#include <serial.h>
#include <nand.h>
#include <onenand_uboot.h>
+#include <mmc.h>
+
+#ifdef CONFIG_BITBANGMII
+#include <miiphy.h>
+#endif
#ifdef CONFIG_DRIVER_SMC91111
#include "../drivers/net/smc91111.h"
const char version_string[] =
U_BOOT_VERSION" (" U_BOOT_DATE " - " U_BOOT_TIME ")"CONFIG_IDENT_STRING;
-#ifdef CONFIG_DRIVER_CS8900
-extern void cs8900_get_enetaddr (void);
-#endif
-
#ifdef CONFIG_DRIVER_RTL8019
extern void rtl8019_get_enetaddr (uchar * addr);
#endif
#include <i2c.h>
#endif
-/*
- * Begin and End of memory area for malloc(), and current "brk"
- */
-static ulong mem_malloc_start = 0;
-static ulong mem_malloc_end = 0;
-static ulong mem_malloc_brk = 0;
-
-static
-void mem_malloc_init (ulong dest_addr)
-{
- mem_malloc_start = dest_addr;
- mem_malloc_end = dest_addr + CONFIG_SYS_MALLOC_LEN;
- mem_malloc_brk = mem_malloc_start;
-
- memset ((void *) mem_malloc_start, 0,
- mem_malloc_end - mem_malloc_start);
-}
-
-void *sbrk (ptrdiff_t increment)
-{
- ulong old = mem_malloc_brk;
- ulong new = old + increment;
-
- if ((new < mem_malloc_start) || (new > mem_malloc_end)) {
- return (NULL);
- }
- mem_malloc_brk = new;
-
- return ((void *) old);
-}
-
/************************************************************************
* Coloured LED functionality
void inline yellow_LED_on(void)__attribute__((weak, alias("__yellow_LED_on")));
void inline __yellow_LED_off(void) {}
void inline yellow_LED_off(void)__attribute__((weak, alias("__yellow_LED_off")));
+void inline __blue_LED_on(void) {}
+void inline blue_LED_on(void)__attribute__((weak, alias("__blue_LED_on")));
+void inline __blue_LED_off(void) {}
+void inline blue_LED_off(void)__attribute__((weak, alias("__blue_LED_off")));
/************************************************************************
* Init Utilities *
*/
typedef int (init_fnc_t) (void);
-int print_cpuinfo (void); /* test-only */
+int print_cpuinfo (void);
init_fnc_t *init_sequence[] = {
- cpu_init, /* basic cpu dependent setup */
+#if defined(CONFIG_ARCH_CPU_INIT)
+ arch_cpu_init, /* basic arch cpu dependent setup */
+#endif
board_init, /* basic board dependent setup */
+#if defined(CONFIG_USE_IRQ)
interrupt_init, /* set up exceptions */
+#endif
+ timer_init, /* initialize timer */
env_init, /* initialize environment */
init_baudrate, /* initialze baudrate settings */
serial_init, /* serial communications setup */
}
}
+ /* armboot_start is defined in the board-specific linker script */
+ mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN,
+ CONFIG_SYS_MALLOC_LEN);
+
#ifndef CONFIG_SYS_NO_FLASH
/* configure available FLASH banks */
display_flash_config (flash_init ());
}
#endif /* CONFIG_LCD */
- /* armboot_start is defined in the board-specific linker script */
- mem_malloc_init (_armboot_start - CONFIG_SYS_MALLOC_LEN);
-
#if defined(CONFIG_CMD_NAND)
puts ("NAND: ");
nand_init(); /* go init the NAND */
/* IP Address */
gd->bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
- devices_init (); /* get the devices list going. */
+ stdio_init (); /* get the devices list going. */
jumptable_init ();
console_init_r (); /* fully init console as a device */
+#if defined(CONFIG_ARCH_MISC_INIT)
+ /* miscellaneous arch dependent initialisations */
+ arch_misc_init ();
+#endif
#if defined(CONFIG_MISC_INIT_R)
/* miscellaneous platform dependent initialisations */
misc_init_r ();
}
#endif
-#ifdef CONFIG_DRIVER_CS8900
- /* XXX: this needs to be moved to board init */
- cs8900_get_enetaddr ();
-#endif
-
#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
/* XXX: this needs to be moved to board init */
if (getenv ("ethaddr")) {
#ifdef BOARD_LATE_INIT
board_late_init ();
#endif
+
+#ifdef CONFIG_GENERIC_MMC
+ puts ("MMC: ");
+ mmc_initialize (gd->bd);
+#endif
+
+#ifdef CONFIG_BITBANGMII
+ bb_miiphy_init();
+#endif
#if defined(CONFIG_CMD_NET)
#if defined(CONFIG_NET_MULTI)
puts ("Net: ");
puts ("### ERROR ### Please RESET the board ###\n");
for (;;);
}
-
-#ifdef CONFIG_MODEM_SUPPORT
-static inline void mdm_readline(char *buf, int bufsiz);
-
-/* called from main loop (common/main.c) */
-extern void dbg(const char *fmt, ...);
-int mdm_init (void)
-{
- char env_str[16];
- char *init_str;
- int i;
- extern char console_buffer[];
- extern void enable_putc(void);
- extern int hwflow_onoff(int);
-
- enable_putc(); /* enable serial_putc() */
-
-#ifdef CONFIG_HWFLOW
- init_str = getenv("mdm_flow_control");
- if (init_str && (strcmp(init_str, "rts/cts") == 0))
- hwflow_onoff (1);
- else
- hwflow_onoff(-1);
-#endif
-
- for (i = 1;;i++) {
- sprintf(env_str, "mdm_init%d", i);
- if ((init_str = getenv(env_str)) != NULL) {
- serial_puts(init_str);
- serial_puts("\n");
- for(;;) {
- mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
- dbg("ini%d: [%s]", i, console_buffer);
-
- if ((strcmp(console_buffer, "OK") == 0) ||
- (strcmp(console_buffer, "ERROR") == 0)) {
- dbg("ini%d: cmd done", i);
- break;
- } else /* in case we are originating call ... */
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- dbg("ini%d: connect", i);
- return 0;
- }
- }
- } else
- break; /* no init string - stop modem init */
-
- udelay(100000);
- }
-
- udelay(100000);
-
- /* final stage - wait for connect */
- for(;i > 1;) { /* if 'i' > 1 - wait for connection
- message from modem */
- mdm_readline(console_buffer, CONFIG_SYS_CBSIZE);
- dbg("ini_f: [%s]", console_buffer);
- if (strncmp(console_buffer, "CONNECT", 7) == 0) {
- dbg("ini_f: connected");
- return 0;
- }
- }
-
- return 0;
-}
-
-/* 'inline' - We have to do it fast */
-static inline void mdm_readline(char *buf, int bufsiz)
-{
- char c;
- char *p;
- int n;
-
- n = 0;
- p = buf;
- for(;;) {
- c = serial_getc();
-
- /* dbg("(%c)", c); */
-
- switch(c) {
- case '\r':
- break;
- case '\n':
- *p = '\0';
- return;
-
- default:
- if(n++ > bufsiz) {
- *p = '\0';
- return; /* sanity check */
- }
- *p = c;
- p++;
- break;
- }
- }
-}
-#endif /* CONFIG_MODEM_SUPPORT */