use strict;
use warnings;
-use EV;
-use AnyEvent;
-use IO::Scalar; # not in core :\
-use File::Temp qw(tempfile tempdir);
use v5.10;
-use DateTime;
-use Data::Dumper;
+# the following are modules which ship with Perl (>= 5.10):
+use Pod::Usage;
+use Carp::Always;
use Cwd qw(abs_path);
-use Proc::Background;
+use File::Basename qw(basename);
+use File::Temp qw(tempfile tempdir);
+use Getopt::Long;
+use IO::Socket::UNIX;
+use POSIX;
+use Time::HiRes qw(sleep gettimeofday tv_interval);
use TAP::Harness;
use TAP::Parser;
use TAP::Parser::Aggregator;
-use File::Basename qw(basename);
-use AnyEvent::I3 qw(:all);
-use Try::Tiny;
-use Getopt::Long;
-use Time::HiRes qw(sleep);
-use X11::XCB::Connection;
-use IO::Socket::UNIX; # core
-use POSIX; # core
+# these are shipped with the testsuite
+use lib qw(lib);
+use SocketActivation;
+# the following modules are not shipped with Perl
+use AnyEvent;
use AnyEvent::Handle;
+use AnyEvent::I3 qw(:all);
+use X11::XCB;
-# open a file so that we get file descriptor 3. we will later close it in the
-# child and dup() the listening socket file descriptor to 3 to pass it to i3
-open(my $reserved, '<', '/dev/null');
-if (fileno($reserved) != 3) {
- warn "Socket file descriptor is not 3.";
- warn "Please don't start this script within a subshell of vim or something.";
- exit 1;
-}
+# We actually use AnyEvent to make sure it loads an event loop implementation.
+# Afterwards, we overwrite SIGCHLD:
+my $cv = AnyEvent->condvar;
-# install a dummy CHLD handler to overwrite the CHLD handler of AnyEvent / EV
-# XXX: we could maybe also use a different loop than the default loop in EV?
+# Install a dummy CHLD handler to overwrite the CHLD handler of AnyEvent.
+# AnyEvent’s handler wait()s for every child which conflicts with TAP (TAP
+# needs to get the exit status to determine if a test is successful).
$SIG{CHLD} = sub {
};
}
my $coverage_testing = 0;
+my $valgrind = 0;
+my $help = 0;
my @displays = ();
my $result = GetOptions(
"coverage-testing" => \$coverage_testing,
+ "valgrind" => \$valgrind,
"display=s" => \@displays,
+ "help|?" => \$help,
);
+pod2usage(0) if $help;
+
@displays = split(/,/, join(',', @displays));
@displays = map { s/ //g; $_ } @displays;
my @conns;
my @wdisplays;
for my $display (@displays) {
- try {
- my $x = X11::XCB::Connection->new(display => $display);
+ my $screen;
+ my $x = X11::XCB->new($display, $screen);
+ if ($x->has_error) {
+ say STDERR "WARNING: Not using X11 display $display, could not connect";
+ } else {
push @conns, $x;
push @wdisplays, $display;
- } catch {
- say STDERR "WARNING: Not using X11 display $display, could not connect";
- };
+ }
}
my $config = slurp('i3-test.config');
# 2: create an output directory for this test-run
my $outdir = "testsuite-";
-$outdir .= DateTime->now->strftime("%Y-%m-%d-%H-%M-%S-");
+$outdir .= POSIX::strftime("%Y-%m-%d-%H-%M-%S-", localtime());
$outdir .= `git describe --tags`;
chomp($outdir);
mkdir($outdir) or die "Could not create $outdir";
my $aggregator = TAP::Parser::Aggregator->new();
$aggregator->start();
-my $cv = AnyEvent->condvar;
-
# We start tests concurrently: For each display, one test gets started. Every
# test starts another test after completing.
take_job($_) for @wdisplays;
my $dont_start = (slurp($test) =~ /# !NO_I3_INSTANCE!/);
my $logpath = "$outdir/i3-log-for-" . basename($test);
- my ($fh, $tmpfile) = tempfile();
+ my ($fh, $tmpfile) = tempfile('i3-run-cfg.XXXXXX', UNLINK => 1);
say $fh $config;
say $fh "ipc-socket /tmp/nested-$display";
close($fh);
my $activate_cv = AnyEvent->condvar;
- my $start_i3 = sub {
- # remove the old unix socket
- unlink("/tmp/nested-$display-activation");
-
- # pass all file descriptors up to three to the children.
- # we need to set this flag before opening the socket.
- open(my $fdtest, '<', '/dev/null');
- $^F = fileno($fdtest);
- close($fdtest);
- my $socket = IO::Socket::UNIX->new(
- Listen => 1,
- Local => "/tmp/nested-$display-activation",
- );
+ my $time_before_start = [gettimeofday];
- my $pid = fork;
- if (!defined($pid)) {
- die "could not fork()";
- }
- say "pid = $pid";
- if ($pid == 0) {
- say "child!";
- $ENV{LISTEN_PID} = $$;
- $ENV{LISTEN_FDS} = 1;
- $ENV{DISPLAY} = $display;
- $^F = 3;
-
- say "fileno is " . fileno($socket);
- close($reserved);
- POSIX::dup2(fileno($socket), 3);
-
- # now execute i3
- my $i3cmd = abs_path("../i3") . " -V -d all --disable-signalhandler";
- my $cmd = "exec $i3cmd -c $tmpfile >$logpath 2>&1";
- exec "/bin/sh", '-c', $cmd;
-
- # if we are still here, i3 could not be found or exec failed. bail out.
- exit 1;
- }
+ my $pid;
+ if ($dont_start) {
+ $activate_cv->send(1);
+ } else {
+ $pid = activate_i3(
+ unix_socket_path => "/tmp/nested-$display-activation",
+ display => $display,
+ configfile => $tmpfile,
+ outdir => $outdir,
+ logpath => $logpath,
+ valgrind => $valgrind,
+ cv => $activate_cv
+ );
my $child_watcher;
$child_watcher = AnyEvent->child(pid => $pid, cb => sub {
say "child died. pid = $pid";
undef $child_watcher;
});
-
- # close the socket, the child process should be the only one which keeps a file
- # descriptor on the listening socket.
- $socket->close;
-
- # We now connect (will succeed immediately) and send a request afterwards.
- # As soon as the reply is there, i3 is considered ready.
- my $cl = IO::Socket::UNIX->new(Peer => "/tmp/nested-$display-activation");
- my $hdl;
- $hdl = AnyEvent::Handle->new(fh => $cl, on_error => sub { $activate_cv->send(0) });
-
- # send a get_tree message without payload
- $hdl->push_write('i3-ipc' . pack("LL", 0, 4));
-
- # wait for the reply
- $hdl->push_read(chunk => 1, => sub {
- my ($h, $line) = @_;
- say "read something from i3";
- $activate_cv->send(1);
- undef $hdl;
- });
-
- return $pid;
- };
-
- my $pid;
- $pid = $start_i3->() unless $dont_start;
+ }
my $kill_i3 = sub {
+ my $kill_cv = AnyEvent->condvar;
+
# Don’t bother killing i3 when we haven’t started it
- return if $dont_start;
+ if ($dont_start) {
+ $kill_cv->send();
+ return $kill_cv;
+ }
# When measuring code coverage, try to exit i3 cleanly (otherwise, .gcda
# files are not written) and fallback to killing it
- if ($coverage_testing) {
+ if ($coverage_testing || $valgrind) {
my $exited = 0;
- try {
- say "Exiting i3 cleanly...";
- i3("/tmp/nested-$display")->command('exit')->recv;
- $exited = 1;
- };
- return if $exited;
+ say "[$display] Exiting i3 cleanly...";
+ my $i3 = i3("/tmp/nested-$display");
+ $i3->connect->cb(sub {
+ if (!$_[0]->recv) {
+ # Could not connect to i3, just kill -9 it
+ kill(9, $pid) or die "Could not kill i3 using kill($pid)";
+ $kill_cv->send();
+ } else {
+ # Connected. Now send exit and continue once that’s acked.
+ $i3->command('exit')->cb(sub {
+ $kill_cv->send();
+ });
+ }
+ });
+ } else {
+ # No coverage testing or valgrind? Just kill -9 i3.
+ kill(9, $pid) or die "Could not kill i3 using kill($pid)";
+ $kill_cv->send();
}
- say "[$display] killing i3";
- kill(9, $pid) or die "could not kill i3";
+ return $kill_cv;
};
# This will be called as soon as i3 is running and answered to our
# IPC request
$activate_cv->cb(sub {
- say "cb";
+ my $time_activating = [gettimeofday];
+ my $start_duration = tv_interval($time_before_start, $time_activating);
my ($status) = $activate_cv->recv;
- say "complete-run: status = $status";
+ if ($dont_start) {
+ say "[$display] Not starting i3, testcase does that";
+ } else {
+ say "[$display] i3 startup: took " . sprintf("%.2f", $start_duration) . "s, status = $status";
+ }
say "[$display] Running $test with logfile $logpath";
my $output;
+ open(my $spool, '>', \$output);
my $parser = TAP::Parser->new({
- exec => [ 'sh', '-c', "DISPLAY=$display /usr/bin/perl -It/lib $test" ],
- spool => IO::Scalar->new(\$output),
+ exec => [ 'sh', '-c', qq|DISPLAY=$display LOGPATH="$logpath" OUTDIR="$outdir" VALGRIND=$valgrind /usr/bin/perl -Ilib $test| ],
+ spool => $spool,
merge => 1,
});
$aggregator->add($test, $parser);
push @done, [ $test, $output ];
- $kill_i3->();
+ my $exitcv = $kill_i3->();
+ $exitcv->cb(sub {
- undef $_ for @watchers;
- if (@done == $num) {
- $cv->send;
- } else {
- take_job($display);
- }
+ undef $_ for @watchers;
+ if (@done == $num) {
+ $cv->send;
+ } else {
+ take_job($display);
+ }
+ });
}
);
push @watchers, $w;
}
});
-
- $activate_cv->send(1) if $dont_start;
}
$cv->recv;
# 4: print summary
$harness->summary($aggregator);
+
+__END__
+
+=head1 NAME
+
+complete-run.pl - Run the i3 testsuite
+
+=head1 SYNOPSIS
+
+complete-run.pl [files...]
+
+=head1 OPTIONS
+
+=over 8
+
+=item B<--display>
+
+Specifies which X11 display should be used. Can be specified multiple times and
+will parallelize the tests:
+
+ # Run tests on the second X server
+ ./complete-run.pl -d :1
+
+ # Run four tests in parallel on some Xdummy servers
+ ./complete-run.pl -d :1,:2,:3,:4
+
+=item B<--valgrind>
+
+Runs i3 under valgrind to find memory problems. The output will be available in
+C<latest/valgrind.log>.
+
+=item B<--coverage-testing>
+
+Exits i3 cleanly (instead of kill -9) to make coverage testing work properly.