#!/usr/bin/env perl
# vim:ts=4:sw=4:expandtab
-# © 2010-2011 Michael Stapelberg and contributors
+# © 2010-2012 Michael Stapelberg and contributors
package complete_run;
use strict;
use warnings;
use v5.10;
+use utf8;
# the following are modules which ship with Perl (>= 5.10):
use Pod::Usage;
use Cwd qw(abs_path);
use TAP::Harness;
use TAP::Parser;
use TAP::Parser::Aggregator;
+use Time::HiRes qw(time);
+use IO::Handle;
# these are shipped with the testsuite
use lib qw(lib);
-use StartXDummy;
+use StartXServer;
use StatusLine;
use TestWorker;
# the following modules are not shipped with Perl
use AnyEvent::Handle;
use AnyEvent::I3 qw(:all);
use X11::XCB::Connection;
+use JSON::XS; # AnyEvent::I3 depends on it, too.
+
+binmode STDOUT, ':utf8';
+binmode STDERR, ':utf8';
# Close superfluous file descriptors which were passed by running in a VIM
# subshell or situations like that.
my $log;
sub Log { say $log "@_" }
-my $coverage_testing = 0;
-my $valgrind = 0;
-my $strace = 0;
+my %timings;
my $help = 0;
-# Number of tests to run in parallel. Important to know how many Xdummy
+# Number of tests to run in parallel. Important to know how many Xephyr
# instances we need to start (unless @displays are given). Defaults to
# num_cores * 2.
my $parallel = undef;
my @displays = ();
+my %options = (
+ valgrind => 0,
+ strace => 0,
+ xtrace => 0,
+ coverage => 0,
+ restart => 0,
+);
+my $keep_xserver_output = 0;
my $result = GetOptions(
- "coverage-testing" => \$coverage_testing,
- "valgrind" => \$valgrind,
- "strace" => \$strace,
+ "coverage-testing" => \$options{coverage},
+ "keep-xserver-output" => \$keep_xserver_output,
+ "valgrind" => \$options{valgrind},
+ "strace" => \$options{strace},
+ "xtrace" => \$options{xtrace},
"display=s" => \@displays,
"parallel=i" => \$parallel,
"help|?" => \$help,
pod2usage(-verbose => 2, -exitcode => 0) if $help;
+# Check for missing executables
+my @binaries = qw(
+ ../i3
+ ../i3bar/i3bar
+ ../i3-config-wizard/i3-config-wizard
+ ../i3-dump-log/i3-dump-log
+ ../i3-input/i3-input
+ ../i3-msg/i3-msg
+ ../i3-nagbar/i3-nagbar
+ );
+
+foreach my $binary (@binaries) {
+ die "$binary executable not found, did you run “make”?" unless -e $binary;
+ die "$binary is not an executable" unless -x $binary;
+}
+
+qx(Xephyr -help 2>&1);
+die "Xephyr was not found in your path. Please install Xephyr (xserver-xephyr on Debian)." if $?;
+
@displays = split(/,/, join(',', @displays));
@displays = map { s/ //g; $_ } @displays;
-# No displays specified, let’s start some Xdummy instances.
-@displays = start_xdummy($parallel) if @displays == 0;
+# 2: get a list of all testcases
+my @testfiles = @ARGV;
+
+# if no files were passed on command line, run all tests from t/
+@testfiles = <t/*.t> if @testfiles == 0;
+
+my $numtests = scalar @testfiles;
+
+# No displays specified, let’s start some Xephyr instances.
+if (@displays == 0) {
+ @displays = start_xserver($parallel, $numtests, $keep_xserver_output);
+}
# 1: create an output directory for this test-run
my $outdir = "testsuite-";
$outdir .= `git describe --tags`;
chomp($outdir);
mkdir($outdir) or die "Could not create $outdir";
-unlink("latest") if -e "latest";
+unlink("latest") if -l "latest";
symlink("$outdir", "latest") or die "Could not symlink latest to $outdir";
# connect to all displays for two reasons:
# 1: check if the display actually works
# 2: keep the connection open so that i3 is not the only client. this prevents
-# the X server from exiting (Xdummy will restart it, but not quick enough
-# sometimes)
-my @worker;
+# the X server from exiting
+my @single_worker;
for my $display (@displays) {
my $screen;
my $x = X11::XCB::Connection->new(display => $display);
die "Could not connect to display $display\n";
} else {
# start a TestWorker for each display
- push @worker, worker($display, $x, $outdir);
+ push @single_worker, worker($display, $x, $outdir, \%options);
}
}
-# 2: get a list of all testcases
-my @testfiles = @ARGV;
+# Read previous timing information, if available. We will be able to roughly
+# predict the test duration and schedule a good order for the tests.
+my $timingsjson = StartXServer::slurp('.last_run_timings.json');
+%timings = %{decode_json($timingsjson)} if length($timingsjson) > 0;
+
+# Re-order the files so that those which took the longest time in the previous
+# run will be started at the beginning to not delay the whole run longer than
+# necessary.
+@testfiles = map { $_->[0] }
+ sort { $b->[1] <=> $a->[1] }
+ map { [$_, $timings{$_} // 999] } @testfiles;
+
+# Run 000-load-deps.t first to bail out early when dependencies are missing.
+my $loadtest = "t/000-load-deps.t";
+if ((scalar grep { $_ eq $loadtest } @testfiles) > 0) {
+ @testfiles = ($loadtest, grep { $_ ne $loadtest } @testfiles);
+}
-# if no files were passed on command line, run all tests from t/
-@testfiles = <t/*.t> if @testfiles == 0;
+printf("\nRough time estimate for this run: %.2f seconds\n\n", $timings{GLOBAL})
+ if exists($timings{GLOBAL});
+
+# Forget the old timings, we don’t necessarily run the same set of tests as
+# before. Otherwise we would end up with left-overs.
+%timings = (GLOBAL => time());
my $logfile = "$outdir/complete-run.log";
open $log, '>', $logfile or die "Could not create '$logfile': $!";
+$log->autoflush(1);
say "Writing logfile to '$logfile'...";
# 3: run all tests
status_init(displays => \@displays, tests => $num);
-my $cv = AE::cv;
+my $single_cv = AE::cv;
# We start tests concurrently: For each display, one test gets started. Every
# test starts another test after completing.
-for (@worker) { $cv->begin; take_job($_) }
+for (@single_worker) {
+ $single_cv->begin;
+ take_job($_, $single_cv, \@testfiles);
+}
-$cv->recv;
+$single_cv->recv;
$aggregator->stop();
close $log;
+# 5: Save the timings for better scheduling/prediction next run.
+$timings{GLOBAL} = time() - $timings{GLOBAL};
+open(my $fh, '>', '.last_run_timings.json');
+print $fh encode_json(\%timings);
+close($fh);
+
+# 6: Print the slowest test files.
+my @slowest = map { $_->[0] }
+ sort { $b->[1] <=> $a->[1] }
+ map { [$_, $timings{$_}] }
+ grep { !/^GLOBAL$/ } keys %timings;
+say '';
+say 'The slowest tests are:';
+printf("\t%s with %.2f seconds\n", $_, $timings{$_})
+ for @slowest[0..($#slowest > 4 ? 4 : $#slowest)];
+
+# When we are running precisely one test, print the output. Makes developing
+# with a single testcase easier.
+if ($numtests == 1) {
+ say '';
+ say 'Test output:';
+ say StartXServer::slurp($logfile);
+}
+
END { cleanup() }
exit 0;
# triggered to finish testing.
#
sub take_job {
- my ($worker) = @_;
+ my ($worker, $cv, $tests) = @_;
- my $test = shift @testfiles
+ my $test = shift @$tests
or return $cv->end;
my $display = $worker->{display};
Log status($display, "$test: starting");
+ $timings{$test} = time();
worker_next($worker, $test);
# create a TAP::Parser with an in-memory fh
for (1 .. $lines) {
my $result = $parser->next;
- if (defined($result) and $result->is_test) {
+ next unless defined($result);
+ if ($result->is_test) {
$tests_completed++;
status($display, "$test: [$tests_completed/??] ");
+ } elsif ($result->is_bailout) {
+ Log status($display, "$test: BAILOUT");
+ status_completed(scalar @done);
+ say "";
+ say "test $test bailed out: " . $result->explanation;
+ exit 1;
}
}
return unless $t_eof;
Log status($display, "$test: finished");
+ $timings{$test} = time() - $timings{$test};
status_completed(scalar @done);
$aggregator->add($test, $parser);
push @done, [ $test, $output ];
undef $w;
- take_job($worker);
+ take_job($worker, $cv, $tests);
}
);
}
=head1 EXAMPLE
-To run the whole testsuite on a reasonable number of Xdummy instances (your
+To run the whole testsuite on a reasonable number of Xephyr instances (your
running X11 will not be touched), run:
./complete-run.pl
# Run tests on the second X server
./complete-run.pl -d :1
- # Run four tests in parallel on some Xdummy servers
+ # Run four tests in parallel on some Xephyr servers
./complete-run.pl -d :1,:2,:3,:4
Note that it is not necessary to specify this anymore. If omitted,
-complete-run.pl will start (num_cores * 2) Xdummy instances.
+complete-run.pl will start (num_cores * 2) Xephyr instances.
=item B<--valgrind>
Runs i3 under strace to trace system calls. The output will be available in
C<latest/strace-for-$test.log>.
+=item B<--xtrace>
+
+Runs i3 under xtrace to trace X11 requests/replies. The output will be
+available in C<latest/xtrace-for-$test.log>.
+
=item B<--coverage-testing>
Exits i3 cleanly (instead of kill -9) to make coverage testing work properly.
=item B<--parallel>
-Number of Xdummy instances to start (if you don’t want to start num_cores * 2
+Number of Xephyr instances to start (if you don’t want to start num_cores * 2
instances for some reason).
- # Run all tests on a single Xdummy instance
+ # Run all tests on a single Xephyr instance
./complete-run.pl -p 1
projects / i3 / i3 / blobdiff