#!/usr/bin/env perl
# vim:ts=4:sw=4:expandtab
# © 2010-2011 Michael Stapelberg and contributors
-
+package complete_run;
use strict;
use warnings;
use v5.10;
# the following are modules which ship with Perl (>= 5.10):
use Pod::Usage;
use Cwd qw(abs_path);
-use File::Basename qw(basename);
use File::Temp qw(tempfile tempdir);
use Getopt::Long;
-use IO::Socket::UNIX;
use POSIX ();
-use Time::HiRes qw(sleep gettimeofday tv_interval);
use TAP::Harness;
use TAP::Parser;
use TAP::Parser::Aggregator;
+use Time::HiRes qw(time);
+use IO::Handle;
# these are shipped with the testsuite
use lib qw(lib);
use StartXDummy;
use StatusLine;
+use TestWorker;
# the following modules are not shipped with Perl
use AnyEvent;
use AnyEvent::Util;
use AnyEvent::Handle;
use AnyEvent::I3 qw(:all);
-use X11::XCB;
+use X11::XCB::Connection;
+use JSON::XS; # AnyEvent::I3 depends on it, too.
# Close superfluous file descriptors which were passed by running in a VIM
# subshell or situations like that.
AnyEvent::Util::close_all_fds_except(0, 1, 2);
-# We actually use AnyEvent to make sure it loads an event loop implementation.
-# Afterwards, we overwrite SIGCHLD:
-my $cv = AnyEvent->condvar;
-
-# Install a dummy CHLD handler to overwrite the CHLD handler of AnyEvent.
-# AnyEvent’s handler wait()s for every child which conflicts with TAP (TAP
-# needs to get the exit status to determine if a test is successful).
-$SIG{CHLD} = sub {
-};
-
# convinience wrapper to write to the log file
my $log;
sub Log { say $log "@_" }
-my $coverage_testing = 0;
-my $valgrind = 0;
-my $strace = 0;
+my %timings;
my $help = 0;
# Number of tests to run in parallel. Important to know how many Xdummy
# instances we need to start (unless @displays are given). Defaults to
# num_cores * 2.
my $parallel = undef;
my @displays = ();
-my @childpids = ();
+my %options = (
+ valgrind => 0,
+ strace => 0,
+ xtrace => 0,
+ coverage => 0,
+ restart => 0,
+);
+my $keep_xdummy_output = 0;
my $result = GetOptions(
- "coverage-testing" => \$coverage_testing,
- "valgrind" => \$valgrind,
- "strace" => \$strace,
+ "coverage-testing" => \$options{coverage},
+ "keep-xdummy-output" => \$keep_xdummy_output,
+ "valgrind" => \$options{valgrind},
+ "strace" => \$options{strace},
+ "xtrace" => \$options{xtrace},
"display=s" => \@displays,
"parallel=i" => \$parallel,
"help|?" => \$help,
pod2usage(-verbose => 2, -exitcode => 0) if $help;
+# Check for missing executables
+my @binaries = qw(
+ ../i3
+ ../i3bar/i3bar
+ ../i3-config-wizard/i3-config-wizard
+ ../i3-dump-log/i3-dump-log
+ ../i3-input/i3-input
+ ../i3-msg/i3-msg
+ ../i3-nagbar/i3-nagbar
+ );
+
+foreach my $binary (@binaries) {
+ die "$binary executable not found" unless -e $binary;
+ die "$binary is not an executable" unless -x $binary;
+}
+
@displays = split(/,/, join(',', @displays));
@displays = map { s/ //g; $_ } @displays;
+# 2: get a list of all testcases
+my @testfiles = @ARGV;
+
+# if no files were passed on command line, run all tests from t/
+@testfiles = <t/*.t> if @testfiles == 0;
+
+my $numtests = scalar @testfiles;
+
# No displays specified, let’s start some Xdummy instances.
if (@displays == 0) {
- my ($displays, $pids) = start_xdummy($parallel);
- @displays = @$displays;
- @childpids = @$pids;
+ @displays = start_xdummy($parallel, $numtests, $keep_xdummy_output);
}
+# 1: create an output directory for this test-run
+my $outdir = "testsuite-";
+$outdir .= POSIX::strftime("%Y-%m-%d-%H-%M-%S-", localtime());
+$outdir .= `git describe --tags`;
+chomp($outdir);
+mkdir($outdir) or die "Could not create $outdir";
+unlink("latest") if -e "latest";
+symlink("$outdir", "latest") or die "Could not symlink latest to $outdir";
+
+
# connect to all displays for two reasons:
# 1: check if the display actually works
# 2: keep the connection open so that i3 is not the only client. this prevents
# the X server from exiting (Xdummy will restart it, but not quick enough
# sometimes)
-my @conns;
+my @single_worker;
for my $display (@displays) {
my $screen;
- my $x = X11::XCB->new($display, $screen);
+ my $x = X11::XCB::Connection->new(display => $display);
if ($x->has_error) {
die "Could not connect to display $display\n";
} else {
- push @conns, $x;
+ # start a TestWorker for each display
+ push @single_worker, worker($display, $x, $outdir, \%options);
}
}
-# 1: get a list of all testcases
-my @testfiles = @ARGV;
+# Read previous timing information, if available. We will be able to roughly
+# predict the test duration and schedule a good order for the tests.
+my $timingsjson = StartXDummy::slurp('.last_run_timings.json');
+%timings = %{decode_json($timingsjson)} if length($timingsjson) > 0;
-# if no files were passed on command line, run all tests from t/
-@testfiles = <t/*.t> if @testfiles == 0;
+# Re-order the files so that those which took the longest time in the previous
+# run will be started at the beginning to not delay the whole run longer than
+# necessary.
+@testfiles = map { $_->[0] }
+ sort { $b->[1] <=> $a->[1] }
+ map { [$_, $timings{$_} // 999] } @testfiles;
-# 2: create an output directory for this test-run
-my $outdir = "testsuite-";
-$outdir .= POSIX::strftime("%Y-%m-%d-%H-%M-%S-", localtime());
-$outdir .= `git describe --tags`;
-chomp($outdir);
-mkdir($outdir) or die "Could not create $outdir";
-unlink("latest") if -e "latest";
-symlink("$outdir", "latest") or die "Could not symlink latest to $outdir";
+printf("\nRough time estimate for this run: %.2f seconds\n\n", $timings{GLOBAL})
+ if exists($timings{GLOBAL});
+
+# Forget the old timings, we don’t necessarily run the same set of tests as
+# before. Otherwise we would end up with left-overs.
+%timings = (GLOBAL => time());
my $logfile = "$outdir/complete-run.log";
open $log, '>', $logfile or die "Could not create '$logfile': $!";
+$log->autoflush(1);
say "Writing logfile to '$logfile'...";
# 3: run all tests
status_init(displays => \@displays, tests => $num);
+my $single_cv = AE::cv;
+
# We start tests concurrently: For each display, one test gets started. Every
# test starts another test after completing.
-for (@displays) { $cv->begin; take_job($_) }
+for (@single_worker) {
+ $single_cv->begin;
+ take_job($_, $single_cv, \@testfiles);
+}
-$cv->recv;
+$single_cv->recv;
$aggregator->stop();
for (@done) {
my ($test, $output) = @$_;
+ say "no output for $test" unless $output;
Log "output for $test:";
Log $output;
# print error messages of failed tests
close $log;
-kill(15, $_) for @childpids;
+# 5: Save the timings for better scheduling/prediction next run.
+$timings{GLOBAL} = time() - $timings{GLOBAL};
+open(my $fh, '>', '.last_run_timings.json');
+print $fh encode_json(\%timings);
+close($fh);
+
+# 6: Print the slowest test files.
+my @slowest = map { $_->[0] }
+ sort { $b->[1] <=> $a->[1] }
+ map { [$_, $timings{$_}] }
+ grep { !/^GLOBAL$/ } keys %timings;
+say '';
+say 'The slowest tests are:';
+printf("\t%s with %.2f seconds\n", $_, $timings{$_})
+ for @slowest[0..($#slowest > 4 ? 4 : $#slowest)];
+
+# When we are running precisely one test, print the output. Makes developing
+# with a single testcase easier.
+if ($numtests == 1) {
+ say '';
+ say 'Test output:';
+ say StartXDummy::slurp($logfile);
+}
+
+END { cleanup() }
exit 0;
# triggered to finish testing.
#
sub take_job {
- my ($display) = @_;
+ my ($worker, $cv, $tests) = @_;
- my $test = shift @testfiles
+ my $test = shift @$tests
or return $cv->end;
- my $basename = basename($test);
+ my $display = $worker->{display};
- Log status($display, "Starting $test");
+ Log status($display, "$test: starting");
+ $timings{$test} = time();
+ worker_next($worker, $test);
+ # create a TAP::Parser with an in-memory fh
my $output;
- open(my $spool, '>', \$output);
my $parser = TAP::Parser->new({
- exec => [ 'sh', '-c', qq|DISPLAY=$display TESTNAME="$basename" OUTDIR="$outdir" VALGRIND=$valgrind STRACE=$strace COVERAGE=$coverage_testing /usr/bin/perl -Ilib $test| ],
- spool => $spool,
- merge => 1,
+ source => do { open(my $fh, '<', \$output); $fh },
});
- my $tests_completed;
-
- my @watchers;
- my ($stdout, $stderr) = $parser->get_select_handles;
- for my $handle ($parser->get_select_handles) {
- my $w;
- $w = AnyEvent->io(
- fh => $handle,
- poll => 'r',
- cb => sub {
- # Ignore activity on stderr (unnecessary with merge => 1,
- # but let’s keep it in here if we want to use merge => 0
- # for some reason in the future).
- return if defined($stderr) and $handle == $stderr;
+ my $ipc = $worker->{ipc};
- my $result = $parser->next;
- if (defined($result)) {
- $tests_completed++;
- status($display, "Running $test: [$tests_completed/??]");
- # TODO: check if we should bail out
+ my $w;
+ $w = AnyEvent->io(
+ fh => $ipc,
+ poll => 'r',
+ cb => sub {
+ state $tests_completed = 0;
+ state $partial = '';
+
+ sysread($ipc, my $buf, 4096) or die "sysread: $!";
+
+ if ($partial) {
+ $buf = $partial . $buf;
+ $partial = '';
+ }
+
+ # make sure we feed TAP::Parser complete lines so it doesn't blow up
+ if (substr($buf, -1, 1) ne "\n") {
+ my $nl = rindex($buf, "\n");
+ if ($nl == -1) {
+ $partial = $buf;
return;
}
- # $result is not defined, we are done parsing
- Log status($display, "$test finished");
- close($parser->delete_spool);
- $aggregator->add($test, $parser);
- push @done, [ $test, $output ];
+ # strip partial from buffer
+ $partial = substr($buf, $nl + 1, '');
+ }
+
+ # count lines before stripping eof-marker otherwise we might
+ # end up with for (1 .. 0) { } which would effectivly skip the loop
+ my $lines = $buf =~ tr/\n//;
+ my $t_eof = $buf =~ s/^$TestWorker::EOF$//m;
- status_completed(scalar @done);
+ $output .= $buf;
- undef $_ for @watchers;
- if (@done == $num) {
- $cv->end;
- } else {
- take_job($display);
+ for (1 .. $lines) {
+ my $result = $parser->next;
+ next unless defined($result);
+ if ($result->is_test) {
+ $tests_completed++;
+ status($display, "$test: [$tests_completed/??] ");
+ } elsif ($result->is_bailout) {
+ Log status($display, "$test: BAILOUT");
+ status_completed(scalar @done);
+ say "";
+ say "test $test bailed out: " . $result->explanation;
+ exit 1;
}
}
- );
- push @watchers, $w;
- }
+
+ return unless $t_eof;
+
+ Log status($display, "$test: finished");
+ $timings{$test} = time() - $timings{$test};
+ status_completed(scalar @done);
+
+ $aggregator->add($test, $parser);
+ push @done, [ $test, $output ];
+
+ undef $w;
+ take_job($worker, $cv, $tests);
+ }
+ );
+}
+
+sub cleanup {
+ $_->() for our @CLEANUP;
+ exit;
+}
+
+# must be in a begin block because we C<exit 0> above
+BEGIN {
+ $SIG{$_} = sub {
+ require Carp; Carp::cluck("Caught SIG$_[0]\n");
+ cleanup();
+ } for qw(INT TERM QUIT KILL PIPE)
}
__END__
Runs i3 under strace to trace system calls. The output will be available in
C<latest/strace-for-$test.log>.
+=item B<--xtrace>
+
+Runs i3 under xtrace to trace X11 requests/replies. The output will be
+available in C<latest/xtrace-for-$test.log>.
+
=item B<--coverage-testing>
Exits i3 cleanly (instead of kill -9) to make coverage testing work properly.