#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • https://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • https://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • https://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Checks if the 'move [window/container] to workspace' command works correctly
#
use i3test;
# We move the pointer out of our way to avoid a bug where the focus will
# be set to the window under the cursor
+sync_with_i3;
$x->root->warp_pointer(0, 0);
+sync_with_i3;
sub move_workspace_test {
my ($movecmd) = @_;
my $tmp2 = get_unused_workspace();
cmd "workspace $tmp";
- ok(@{get_ws_content($tmp)} == 0, 'no containers yet');
+ is_num_children($tmp, 0, 'no containers yet');
my $first = open_empty_con($i3);
my $second = open_empty_con($i3);
- ok(@{get_ws_content($tmp)} == 2, 'two containers on first ws');
+ is_num_children($tmp, 2, 'two containers on first ws');
cmd "workspace $tmp2";
- ok(@{get_ws_content($tmp2)} == 0, 'no containers on second ws yet');
+ is_num_children($tmp2, 0, 'no containers on second ws yet');
cmd "workspace $tmp";
cmd "$movecmd $tmp2";
- ok(@{get_ws_content($tmp)} == 1, 'one container on first ws anymore');
- ok(@{get_ws_content($tmp2)} == 1, 'one container on second ws');
+ is_num_children($tmp, 1, 'one container on first ws anymore');
+ is_num_children($tmp2, 1, 'one container on second ws');
my ($nodes, $focus) = get_ws_content($tmp2);
is($focus->[0], $second, 'same container on different ws');
move_workspace_test('move window to workspace');
move_workspace_test('move container to workspace');
+################################################################################
+# Check that 'move to workspace number <number>' works to move a window to
+# named workspaces which start with <number>.
+################################################################################
+
+cmd 'workspace 13: meh';
+cmd 'open';
+is_num_children('13: meh', 1, 'one container on 13: meh');
+
+ok(!workspace_exists('13'), 'workspace 13 does not exist yet');
+
+cmd 'workspace 12';
+cmd 'open';
+
+cmd 'move to workspace number 13';
+is_num_children('13: meh', 2, 'one container on 13: meh');
+is_num_children('12', 0, 'no container on 12 anymore');
+
+ok(!workspace_exists('13'), 'workspace 13 does still not exist');
+
+################################################################################
+# Check that 'move to workspace number <number><name>' works to move a window to
+# named workspaces which start with <number>.
+################################################################################
+
+cmd 'workspace 15: meh';
+cmd 'open';
+is_num_children('15: meh', 1, 'one container on 15: meh');
+
+ok(!workspace_exists('15'), 'workspace 15 does not exist yet');
+ok(!workspace_exists('15: duh'), 'workspace 15: duh does not exist yet');
+
+cmd 'workspace 14';
+cmd 'open';
+
+cmd 'move to workspace number 15: duh';
+is_num_children('15: meh', 2, 'two containers on 15: meh');
+is_num_children('14', 0, 'no container on 14 anymore');
+
+ok(!workspace_exists('15'), 'workspace 15 does still not exist');
+ok(!workspace_exists('15: duh'), 'workspace 15 does still not exist');
+
###################################################################
# check if 'move workspace next' and 'move workspace prev' work
###################################################################
my $tmp = get_unused_workspace();
my $tmp2 = get_unused_workspace();
cmd "workspace $tmp";
-ok(@{get_ws_content($tmp)} == 0, 'no containers yet');
+is_num_children($tmp, 0, 'no containers yet');
my $first = open_empty_con($i3);
my $second = open_empty_con($i3);
-ok(@{get_ws_content($tmp)} == 2, 'two containers on first ws');
+is_num_children($tmp, 2, 'two containers');
cmd "workspace $tmp2";
-ok(@{get_ws_content($tmp2)} == 0, 'no containers yet');
+is_num_children($tmp2, 0, 'no containers yet');
my $third = open_empty_con($i3);
-ok(@{get_ws_content($tmp2)} == 1, 'one container on second ws');
+is_num_children($tmp2, 1, 'one container on second ws');
# go back to the first workspace, move one of the containers to the next one
cmd "workspace $tmp";
cmd 'move workspace next';
-ok(@{get_ws_content($tmp)} == 1, 'one container on first ws');
-ok(@{get_ws_content($tmp2)} == 2, 'two containers on second ws');
+is_num_children($tmp, 1, 'one container on first ws');
+is_num_children($tmp2, 2, 'two containers on second ws');
# go to the second workspace and move two containers to the first one
cmd "workspace $tmp2";
cmd 'move workspace prev';
cmd 'move workspace prev';
-ok(@{get_ws_content($tmp)} == 3, 'three containers on first ws');
-ok(@{get_ws_content($tmp2)} == 0, 'no containers on second ws');
+is_num_children($tmp, 3, 'three containers on first ws');
+is_num_children($tmp2, 0, 'no containers on second ws');
+
+###################################################################
+# check if 'move workspace current' works
+###################################################################
+
+$tmp = get_unused_workspace();
+$tmp2 = get_unused_workspace();
+
+cmd "workspace $tmp";
+$first = open_window(name => 'win-name');
+is_num_children($tmp, 1, 'one container on first ws');
+
+cmd "workspace $tmp2";
+is_num_children($tmp2, 0, 'no containers yet');
+
+cmd qq|[title="win-name"] move workspace $tmp2|;
+is_num_children($tmp2, 1, 'one container on second ws');
+
+cmd qq|[title="win-name"] move workspace $tmp|;
+is_num_children($tmp2, 0, 'no containers on second ws');
###################################################################
# check if floating cons are moved to new workspaces properly
is(@{$ws->{nodes}}, 0, 'no nodes on workspace');
is(@{$ws->{floating_nodes}}, 1, 'one floating node on workspace');
+################################################################################
+# Check that 'move workspace number' works correctly.
+################################################################################
+
+$tmp = get_unused_workspace();
+cmd 'open';
+
+cmd 'workspace 16';
+cmd 'open';
+is_num_children('16', 1, 'one node on ws 16');
+
+cmd "workspace $tmp";
+cmd 'open';
+cmd 'move workspace number 16';
+is_num_children('16', 2, 'two nodes on ws 16');
+
+ok(!workspace_exists('17'), 'workspace 17 does not exist yet');
+cmd 'open';
+cmd 'move workspace number 17';
+ok(workspace_exists('17'), 'workspace 17 created by moving');
+is(@{get_ws('17')->{nodes}}, 1, 'one node on ws 16');
+
+################################################################################
+# The following four tests verify the various 'move workspace' commands when
+# the selection is itself a workspace.
+################################################################################
+
+# borrowed from 122-split.t
+# recursively sums up all nodes and their children
+sub sum_nodes {
+ my ($nodes) = @_;
+
+ return 0 if !@{$nodes};
+
+ my @children = (map { @{$_->{nodes}} } @{$nodes},
+ map { @{$_->{'floating_nodes'}} } @{$nodes});
+
+ return @{$nodes} + sum_nodes(\@children);
+}
+
+############################################################
+# move workspace 'next|prev'
+############################################################
+$tmp = get_unused_workspace();
+$tmp2 = get_unused_workspace();
+
+cmd "workspace $tmp";
+cmd 'open';
+is_num_children($tmp, 1, 'one container on first ws');
+
+cmd "workspace $tmp2";
+cmd 'open';
+is_num_children($tmp2, 1, 'one container on second ws');
+cmd 'open';
+is_num_children($tmp2, 2, 'two containers on second ws');
+
+cmd 'focus parent';
+cmd 'move workspace prev';
+
+is_num_children($tmp, 2, 'two child containers on first ws');
+is(sum_nodes(get_ws_content($tmp)), 4, 'four total containers on first ws');
+is_num_children($tmp2, 0, 'no containers on second ws');
+
+############################################################
+# move workspace current
+# This is a special case that should be a no-op.
+############################################################
+$tmp = fresh_workspace();
+
+cmd 'open';
+is_num_children($tmp, 1, 'one container on first ws');
+my $tmpcount = sum_nodes(get_ws_content($tmp));
+
+cmd 'focus parent';
+cmd "move workspace $tmp";
+
+is(sum_nodes(get_ws_content($tmp)), $tmpcount, 'number of containers in first ws unchanged');
+
+############################################################
+# move workspace '<name>'
+############################################################
+$tmp2 = get_unused_workspace();
+$tmp = fresh_workspace();
+
+cmd 'open';
+is_num_children($tmp, 1, 'one container on first ws');
+
+cmd "workspace $tmp2";
+cmd 'open';
+is_num_children($tmp2, 1, 'one container on second ws');
+cmd 'open';
+is_num_children($tmp2, 2, 'two containers on second ws');
+
+cmd 'focus parent';
+cmd "move workspace $tmp";
+
+is_num_children($tmp, 2, 'two child containers on first ws');
+is(sum_nodes(get_ws_content($tmp)), 4, 'four total containers on first ws');
+is_num_children($tmp2, 0, 'no containers on second ws');
+
+############################################################
+# move workspace number '<number>'
+############################################################
+cmd 'workspace 18';
+cmd 'open';
+is_num_children('18', 1, 'one container on ws 18');
+
+cmd 'workspace 19';
+cmd 'open';
+is_num_children('19', 1, 'one container on ws 19');
+cmd 'open';
+is_num_children('19', 2, 'two containers on ws 19');
+
+cmd 'focus parent';
+cmd 'move workspace number 18';
+
+is_num_children('18', 2, 'two child containers on ws 18');
+is(sum_nodes(get_ws_content('18')), 4, 'four total containers on ws 18');
+is_num_children('19', 0, 'no containers on ws 19');
+
+###################################################################
+# move workspace '<name>' with a floating child
+###################################################################
+$tmp2 = get_unused_workspace();
+$tmp = fresh_workspace();
+cmd 'open';
+cmd 'floating toggle';
+cmd 'open';
+cmd 'floating toggle';
+cmd 'open';
+
+$ws = get_ws($tmp);
+is_num_children($tmp, 1, 'one container on first workspace');
+is(@{$ws->{floating_nodes}}, 2, 'two floating nodes on first workspace');
+
+cmd 'focus parent';
+cmd "move workspace $tmp2";
+
+$ws = get_ws($tmp2);
+is_num_children($tmp2, 1, 'one container on second workspace');
+is(@{$ws->{floating_nodes}}, 2, 'two floating nodes on second workspace');
+
+###################################################################
+# same as the above, but with only floating children
+###################################################################
+$tmp2 = get_unused_workspace();
+$tmp = fresh_workspace();
+cmd 'open';
+cmd 'floating toggle';
+
+$ws = get_ws($tmp);
+is_num_children($tmp, 0, 'no regular nodes on first workspace');
+is(@{$ws->{floating_nodes}}, 1, 'one floating node on first workspace');
+
+cmd 'focus parent';
+cmd "move workspace $tmp2";
+
+$ws = get_ws($tmp2);
+is_num_children($tmp2, 0, 'no regular nodes on second workspace');
+is(@{$ws->{floating_nodes}}, 1, 'one floating node on second workspace');
+
+###################################################################
+# Check that moving an empty workspace using criteria doesn't
+# create unfocused empty workspace.
+###################################################################
+$tmp2 = get_unused_workspace();
+$tmp = fresh_workspace();
+cmd 'mark a';
+cmd "[con_mark=a] move to workspace $tmp2";
+
+is (get_ws($tmp2), undef, 'No empty workspace created');
+
done_testing;
projects / i3 / i3 / blobdiff