#!perl
# vim:ts=4:sw=4:expandtab
#
+# Please read the following documents before working on tests:
+# • https://build.i3wm.org/docs/testsuite.html
+# (or docs/testsuite)
+#
+# • https://build.i3wm.org/docs/lib-i3test.html
+# (alternatively: perldoc ./testcases/lib/i3test.pm)
+#
+# • https://build.i3wm.org/docs/ipc.html
+# (or docs/ipc)
+#
+# • http://onyxneon.com/books/modern_perl/modern_perl_a4.pdf
+# (unless you are already familiar with Perl)
+#
# Tests if assignments work
#
use i3test i3_autostart => 0;
-use X11::XCB qw(PROP_MODE_REPLACE);
-
-# TODO: move to X11::XCB
-sub set_wm_class {
- my ($id, $class, $instance) = @_;
-
- # Add a _NET_WM_STRUT_PARTIAL hint
- my $atomname = $x->atom(name => 'WM_CLASS');
- my $atomtype = $x->atom(name => 'STRING');
-
- $x->change_property(
- PROP_MODE_REPLACE,
- $id,
- $atomname->id,
- $atomtype->id,
- 8,
- length($class) + length($instance) + 2,
- "$instance\x00$class\x00"
- );
-}
sub open_special {
my %args = @_;
- my $wm_class = delete($args{wm_class}) || 'special';
$args{name} //= 'special window';
+ $args{wm_class} //= 'special';
# We use dont_map because i3 will not map the window on the current
# workspace. Thus, open_window would time out in wait_for_map (2 seconds).
my $window = open_window(
%args,
- before_map => sub { set_wm_class($_->id, $wm_class, $wm_class) },
dont_map => 1,
);
$window->map;
return $window;
}
+sub test_workspace_assignment {
+ my $target_ws = "@_";
+
+ # initialize the target workspace, then go to a fresh one
+ ok(!($target_ws ~~ @{get_workspace_names()}), "$target_ws does not exist yet");
+ cmd "workspace $target_ws";
+ cmp_ok(@{get_ws_content($target_ws)}, '==', 0, "no containers on $target_ws yet");
+ cmd 'open';
+ cmp_ok(@{get_ws_content($target_ws)}, '==', 1, "one container on $target_ws");
+ my $tmp = fresh_workspace;
+
+ ok(@{get_ws_content($tmp)} == 0, 'no containers yet');
+ ok($target_ws ~~ @{get_workspace_names()}, "$target_ws does not exist yet");
+
+ # We use sync_with_i3 instead of wait_for_map here because i3 will not actually
+ # map the window -- it will be assigned to a different workspace and will only
+ # be mapped once you switch to that workspace
+ my $window = open_special;
+ sync_with_i3;
+
+ ok(@{get_ws_content($tmp)} == 0, 'still no containers');
+ ok(@{get_ws_content($target_ws)} == 2, "two containers on $target_ws");
+
+ return $window
+}
+
#####################################################################
# start a window and see that it does not get assigned with an empty config
#####################################################################
$config = <<EOT;
# i3 config file (v4)
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-assign "special" → targetws
+assign [class="special"] → targetws
EOT
$pid = launch_with_config($config);
ok(!("targetws" ~~ @{$workspaces}), 'targetws does not exist yet');
$window = open_special;
+sync_with_i3;
ok(@{get_ws_content($tmp)} == 0, 'still no containers');
ok("targetws" ~~ @{get_workspace_names()}, 'targetws exists');
exit_gracefully($pid);
#####################################################################
-# start a window and see that it gets assigned to a workspace which has content
-# already, next to the existing node.
+# start a window and see that it gets assigned to a formerly unused
+# numbered workspace
#####################################################################
-$pid = launch_with_config($config);
+my $config_numbered = <<EOT;
+# i3 config file (v4)
+font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
+assign [class="special"] → workspace number 2
+EOT
+
+$pid = launch_with_config($config_numbered);
-# initialize the target workspace, then go to a fresh one
-ok(!("targetws" ~~ @{get_workspace_names()}), 'targetws does not exist yet');
-cmd 'workspace targetws';
-cmp_ok(@{get_ws_content('targetws')}, '==', 0, 'no containers on targetws yet');
-cmd 'open';
-cmp_ok(@{get_ws_content('targetws')}, '==', 1, 'one container on targetws');
$tmp = fresh_workspace;
ok(@{get_ws_content($tmp)} == 0, 'no containers yet');
-ok("targetws" ~~ @{get_workspace_names()}, 'targetws does not exist yet');
-
+$workspaces = get_workspace_names;
+ok(!("2" ~~ @{$workspaces}), 'workspace number 2 does not exist yet');
-# We use sync_with_i3 instead of wait_for_map here because i3 will not actually
-# map the window -- it will be assigned to a different workspace and will only
-# be mapped once you switch to that workspace
-$window = open_special(dont_map => 1);
-$window->map;
+$window = open_special;
sync_with_i3;
ok(@{get_ws_content($tmp)} == 0, 'still no containers');
-ok(@{get_ws_content('targetws')} == 2, 'two containers on targetws');
+ok("2" ~~ @{get_workspace_names()}, 'workspace number 2 exists');
+
+$window->destroy;
+
+exit_gracefully($pid);
+
+#####################################################################
+# start a window and see that it gets assigned to a numbered
+# workspace which has content already, next to the existing node.
+#####################################################################
+
+$pid = launch_with_config($config_numbered);
+
+$window = test_workspace_assignment("2");
+$window->destroy;
+
+exit_gracefully($pid);
+
+#####################################################################
+# start a window and see that it gets assigned to a numbered workspace with
+# a name which has content already, next to the existing node.
+#####################################################################
+
+$pid = launch_with_config($config_numbered);
+
+cmd 'workspace 2'; # Make sure that we are not testing for "2" again.
+$window = test_workspace_assignment("2: targetws");
+$window->destroy;
+
+exit_gracefully($pid);
+
+#####################################################################
+# start a window and see that it gets assigned to a workspace which
+# has content already, next to the existing node.
+#####################################################################
+
+$pid = launch_with_config($config);
+
+test_workspace_assignment("targetws");
exit_gracefully($pid);
$config = <<EOT;
# i3 config file (v4)
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-assign "special" → ~
+for_window [class="special"] floating enable
EOT
$pid = launch_with_config($config);
ok(!("targetws" ~~ @{$workspaces}), 'targetws does not exist yet');
$window = open_special;
+sync_with_i3;
my $content = get_ws($tmp);
ok(@{$content->{nodes}} == 0, 'no tiling cons');
ok(@{$content->{floating_nodes}} == 1, 'one floating con');
-$window->destroy;
-
+kill_all_windows;
exit_gracefully($pid);
#####################################################################
-# make sure that assignments are case-insensitive in the old syntax.
+# test assignments to named outputs
#####################################################################
-
$config = <<EOT;
# i3 config file (v4)
font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-assign "special" → ~
+
+fake-outputs 1024x768+0+0,1024x768+1024+0,1024x768+1024+768,1024x768+0+768
+
+workspace ws-0 output fake-0
+workspace ws-1 output fake-1
+workspace ws-2 output fake-2
+workspace ws-3 output fake-3
+
+assign [class="special-0"] → output fake-0
+assign [class="special-1"] → output fake-1
+assign [class="special-2"] → output fake-2
+assign [class="special-3"] → output fake-3
+assign [class="special-4"] → output invalid
+
EOT
$pid = launch_with_config($config);
+sub open_in_output {
+ my ($num, $expected_count) = @_;
+ my $ws = "ws-$num";
+ my $class = "special-$num";
+ my $output = "fake-$num";
+
+ is_num_children($ws, $expected_count - 1,
+ "before: " . ($expected_count - 1) . " containers on output $output");
+ $window = open_special(wm_class => $class);
+ sync_with_i3;
+ is_num_children($ws, $expected_count,
+ "after: $expected_count containers on output $output");
+}
+
+cmd "workspace ws-0";
+open_in_output(0, 1);
+my $focused = $x->input_focus;
+
+open_in_output(1, 1);
+is($x->input_focus, $focused, 'focus remains on output fake-0');
+
+open_in_output(2, 1);
+is($x->input_focus, $focused, 'focus remains on output fake-0');
+
+for my $i (1 .. 5){
+ open_in_output(3, $i);
+ is($x->input_focus, $focused, 'focus remains on output fake-0');
+}
+
+# Check invalid output
$tmp = fresh_workspace;
+open_special(wm_class => "special-4");
+sync_with_i3;
+is_num_children($tmp, 1, 'window assigned to invalid output opened in current workspace');
+open_special(wm_class => "special-3");
+sync_with_i3;
+is_num_children($tmp, 1, 'but window assigned to valid output did not');
-ok(@{get_ws_content($tmp)} == 0, 'no containers yet');
-$workspaces = get_workspace_names;
-ok(!("targetws" ~~ @{$workspaces}), 'targetws does not exist yet');
+kill_all_windows;
+exit_gracefully($pid);
-$window = open_special(wm_class => 'SPEcial');
-wait_for_map $window;
+#####################################################################
+# Test assignments to outputs with relative names
+#####################################################################
+$config = <<EOT;
+# i3 config file (v4)
+font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
-$content = get_ws($tmp);
-ok(@{$content->{nodes}} == 0, 'no tiling cons');
-ok(@{$content->{floating_nodes}} == 1, 'one floating con');
+fake-outputs 1024x768+0+0,1024x768+1024+0,1024x768+1024+768,1024x768+0+768
-$window->destroy;
+workspace left-top output fake-0
+workspace right-top output fake-1
+workspace right-bottom output fake-2
+workspace left-bottom output fake-3
+
+assign [class="current"] → output current
+assign [class="left"] → output left
+assign [class="right"] → output right
+assign [class="up"] → output up
+assign [class="down"] → output down
+EOT
+
+$pid = launch_with_config($config);
+
+cmd 'workspace left-top';
+
+is_num_children('left-top', 0, 'no childreon on left-top');
+for my $i (1 .. 5){
+ open_special(wm_class => 'current');
+}
+sync_with_i3;
+is_num_children('left-top', 5, 'windows opened in current workspace');
+
+is_num_children('right-top', 0, 'no children on right-top');
+open_special(wm_class => 'right');
+sync_with_i3;
+is_num_children('right-top', 1, 'one child on right-top');
+
+is_num_children('left-bottom', 0, 'no children on left-bottom');
+open_special(wm_class => 'down');
+sync_with_i3;
+is_num_children('left-bottom', 1, 'one child on left-bottom');
+cmd 'workspace right-bottom';
+
+open_special(wm_class => 'up');
+sync_with_i3;
+is_num_children('right-top', 2, 'two children on right-top');
+
+open_special(wm_class => 'left');
+sync_with_i3;
+is_num_children('left-bottom', 2, 'two children on left-bottom');
+
+kill_all_windows;
exit_gracefully($pid);
#####################################################################
ok(@{get_ws_content($tmp)} == 0, 'no containers yet');
my @docked = get_dock_clients;
-is(@docked, 0, 'one dock client yet');
+is(@docked, 0, 'no dock client yet');
$window = open_special(
window_type => $x->atom(name => '_NET_WM_WINDOW_TYPE_DOCK'),
);
+sync_with_i3;
$content = get_ws($tmp);
ok(@{$content->{nodes}} == 0, 'no tiling cons');
projects / i3 / i3 / blobdiff