# $OpenLDAP$
## This work is part of OpenLDAP Software <http://www.openldap.org/>.
##
-## Copyright 1998-2005 The OpenLDAP Foundation.
+## Copyright 1998-2008 The OpenLDAP Foundation.
## All rights reserved.
##
## Redistribution and use in source and binary forms, with or without
exit 0
fi
+if test $BACKLDAP = ldapno ; then
+ echo "ldap backend not available, test skipped"
+ exit 0
+fi
+
rm -rf $TESTDIR
mkdir -p $TESTDIR $DBDIR1 $DBDIR2
echo "Starting slapd on TCP/IP port $PORT1..."
-. $CONFFILTER $BACKEND $MONITORDB < $CONF > $CONF1
+. $CONFFILTER $BACKEND $MONITORDB < $METACONF1 > $CONF1
$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
PID=$!
if test $WAIT != 0 ; then
fi
KILLPIDS="$PID"
+sleep 1
+
echo "Using ldapsearch to check that slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \
fi
KILLPIDS="$KILLPIDS $PID"
+sleep 1
+
echo "Using ldapsearch to check that slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \
fi
KILLPIDS="$KILLPIDS $PID"
+sleep 1
+
echo "Using ldapsearch to check that slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT3 \
echo "# searching base=\"$BASEDN\"..." >> $SEARCHOUT
$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" >> $SEARCHOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Search failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
+
+# ITS#4195: spurious matchedDN when the search scopes the main target,
+# and the searchBase is not present, so that target returns noSuchObject
+BASEDN="ou=Meta,o=Example,c=US"
+echo "Searching base=\"$BASEDN\"..."
+echo "# searching base=\"$BASEDN\"..." >> $SEARCHOUT
+$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" >> $SEARCHOUT 2>&1
+RC=$?
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
#
# Do some modifications
EOMODS
RC=$?
-if test $RC != 0 ; then
- echo "Modify failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Modify failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Modify failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
echo "Searching base=\"$BASEDN\"..."
echo "# searching base=\"$BASEDN\"..." >> $SEARCHOUT
$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" >> $SEARCHOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Search failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
BASEDN="o=Example,c=US"
echo " base=\"$BASEDN\"..."
$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" -M "$FILTER" '*' ref \
>> $SEARCHOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Search failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
BASEDN="o=Example,c=US"
FILTER="(seeAlso=cn=all staff,ou=Groups,$BASEDN)"
$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" "$FILTER" seeAlso \
>> $SEARCHOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Search failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
FILTER="(uid=example)"
echo "Searching filter=\"$FILTER\""
$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" "$FILTER" uid \
>> $SEARCHOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Search failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
FILTER="(member=cn=Another Added Group,ou=Groups,$BASEDN)"
echo "Searching filter=\"$FILTER\""
$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -b "$BASEDN" "$FILTER" member \
>> $SEARCHOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Search failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
+
+echo "Waiting 10 seconds for cached connections to timeout..."
+sleep 10
+
+echo "Searching with a timed out connection..."
+echo "# searching filter=\"$FILTER\"" >> $SEARCHOUT
+echo "# attrs=\"member\"" >> $SEARCHOUT
+echo "# base=\"$BASEDN\"" >> $SEARCHOUT
+echo "# with a timed out connection..." >> $SEARCHOUT
+$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 -D "cn=Manager,$BASEDN" -w $PASSWD \
+ -b "$BASEDN" "$FILTER" member \
+ >> $SEARCHOUT 2>&1
+RC=$?
+#if test $RC != 0 ; then
+# echo "Search failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
+
+# NOTE: cannot send to $SEARCHOUT because the returned entries
+# are not predictable...
+echo "Checking server-enforced size limit..."
+echo "# Checking server-enforced size limit..." >> $SEARCHOUT
+$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 \
+ -D "cn=Bjorn Jensen,ou=Information Technology Division,ou=People,$BASEDN" -w bjorn \
+ -b "$BASEDN" "(objectClass=*)" 1.1 \
+ >> $TESTOUT 2>&1
+RC=$?
+case $RC in
+ 0)
+ echo "Search should have failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit -1
+ ;;
+ 4)
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
+
+# NOTE: cannot send to $SEARCHOUT because the returned entries
+# are not predictable...
+echo "Checking client-requested size limit..."
+echo "# Checking client-requested size limit..." >> $SEARCHOUT
+$LDAPSEARCH -S "" -h $LOCALHOST -p $PORT3 \
+ -D "cn=Bjorn Jensen,ou=Information Technology Division,ou=People,$BASEDN" -w bjorn \
+ -b "$BASEDN" -z 2 "(objectClass=*)" 1.1 \
+ >> $TESTOUT 2>&1
+RC=$?
+case $RC in
+ 0)
+ echo "Search should have failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit -1
+ ;;
+ 4)
+ ;;
+ *)
+ echo "Search failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
echo "Filtering ldapsearch results..."
. $LDIFFILTER < $SEARCHOUT > $SEARCHFLT
-s $PASSWD "cn=Ursula Hampster,ou=Alumni Association,ou=People,$BASEDN" \
>> $TESTOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Passwd ExOp failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Passwd ExOp failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Passwd ExOp failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
echo "Binding with newly changed password to database \"$BASEDN\"..."
$LDAPWHOAMI -h $LOCALHOST -p $PORT3 \
-D "cn=Ursula Hampster,ou=Alumni Association,ou=People,$BASEDN" \
-w $PASSWD >> $TESTOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "WhoAmI failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "WhoAmI failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ ;;
+ *)
+ echo "WhoAmI failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
echo "Binding as newly added user to database \"$BASEDN\"..."
$LDAPWHOAMI -h $LOCALHOST -p $PORT3 \
-D "cn=Added User,ou=Same as above,ou=Meta,$BASEDN" \
-w $PASSWD >> $TESTOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "WhoAmI failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "WhoAmI failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ ;;
+ *)
+ echo "WhoAmI failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
echo "Changing password to database \"$BASEDN\"..."
$LDAPPASSWD -h $LOCALHOST -p $PORT3 -D "cn=Manager,$BASEDN" -w $PASSWD \
-s meta "cn=Added User,ou=Same as above,ou=Meta,$BASEDN" \
>> $TESTOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "Passwd ExOp failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "Passwd ExOp failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 0
+ ;;
+ *)
+ echo "Passwd ExOp failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
echo "Binding with newly changed password to database \"$BASEDN\"..."
$LDAPWHOAMI -h $LOCALHOST -p $PORT3 \
-D "cn=Added User,ou=Same as above,ou=Meta,$BASEDN" \
-w meta >> $TESTOUT 2>&1
RC=$?
-if test $RC != 0 ; then
- echo "WhoAmI failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 0 ; then
+# echo "WhoAmI failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ ;;
+ *)
+ echo "WhoAmI failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
+
+echo "Binding with incorrect password to database \"$BASEDN\"..."
+$LDAPWHOAMI -h $LOCALHOST -p $PORT3 \
+ -D "cn=Added User,ou=Same as above,ou=Meta,$BASEDN" \
+ -w bogus >> $TESTOUT 2>&1
+RC=$?
+#if test $RC != 0 ; then
+# echo "WhoAmI failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ echo "WhoAmI should have failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit -1
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ ;;
+ *)
+ ;;
+esac
+
+echo "Binding with non-existing user to database \"$BASEDN\"..."
+$LDAPWHOAMI -h $LOCALHOST -p $PORT3 \
+ -D "cn=Non-existing User,ou=Same as above,ou=Meta,$BASEDN" \
+ -w bogus >> $TESTOUT 2>&1
+RC=$?
+#if test $RC != 0 ; then
+# echo "WhoAmI failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit $RC
+#fi
+case $RC in
+ 0)
+ echo "WhoAmI should have failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit -1
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ ;;
+ *)
+ ;;
+esac
echo "Comparing to database \"$BASEDN\"..."
$LDAPCOMPARE -h $LOCALHOST -p $PORT3 \
"cn=Another Added Group,ou=Groups,$BASEDN" \
"member:cn=Added Group,ou=Groups,$BASEDN" >> $TESTOUT 2>&1
RC=$?
-if test $RC != 6 ; then
- echo "Compare failed ($RC)!"
- test $KILLSERVERS != no && kill -HUP $KILLPIDS
- exit $RC
-fi
+#if test $RC != 6 ; then
+# echo "Compare failed ($RC)!"
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+# exit -1
+#fi
+case $RC in
+ 6)
+ ;;
+ 51)
+ echo "### Hit LDAP_BUSY problem; you may want to re-run the test"
+ ;;
+ *)
+ echo "Compare failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+ ;;
+esac
test $KILLSERVERS != no && kill -HUP $KILLPIDS
echo ">>>>> Test succeeded"
-exit 0
+test $KILLSERVERS != no && wait
+
+exit 0