# $OpenLDAP$
## This work is part of OpenLDAP Software <http://www.openldap.org/>.
##
-## Copyright 1998-2005 The OpenLDAP Foundation.
+## Copyright 1998-2016 The OpenLDAP Foundation.
## All rights reserved.
##
## Redistribution and use in source and binary forms, with or without
exit 0
fi
-if test "x$TEST_META" != "xyes" ; then
- echo "### this test is currently disabled;"
- echo "### set \"TEST_META=yes\" to enable (at own risk)."
+if test $BACKLDAP = ldapno ; then
+ echo "ldap backend not available, test skipped"
exit 0
-else
- echo "### this test is __very__ experimental; enable at own risk"
+fi
+
+if test x$TESTLOOPS = x ; then
+ TESTLOOPS=50
+fi
+
+if test x$TESTCHILDREN = x ; then
+ TESTCHILDREN=20
fi
rm -rf $TESTDIR
mkdir -p $TESTDIR $DBDIR1 $DBDIR2
-if test "x$DB_CONFIG" != "x" -a -f $DB_CONFIG ; then
- echo "==> using DB_CONFIG $DB_CONFIG"
- cp $DB_CONFIG $DBDIR1
- cp $DB_CONFIG $DBDIR2
-else
- echo "==> set \"DB_CONFIG\" to the location of the DB_CONFIG file"
- echo "==> you want to use for the test."
+# NOTE: this could be added to all tests...
+if test "$BACKEND" = "bdb" || test "$BACKEND" = "hdb" ; then
+ if test "x$DB_CONFIG" != "x" ; then \
+ if test -f $DB_CONFIG ; then
+ echo "==> using DB_CONFIG \"$DB_CONFIG\""
+ cp $DB_CONFIG $DBDIR1
+ cp $DB_CONFIG $DBDIR2
+ else
+ echo "==> DB_CONFIG must point to a valid file (ignored)"
+ fi
+ else
+ echo "==> set \"DB_CONFIG\" to the DB_CONFIG file you want to use for the test."
+ fi
+ echo ""
fi
echo "Starting slapd on TCP/IP port $PORT1..."
-. $CONFFILTER $BACKEND $MONITORDB < $CONF > $CONF1
+. $CONFFILTER $BACKEND $MONITORDB < $METACONF1 > $CONF1
$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
PID=$!
if test $WAIT != 0 ; then
fi
KILLPIDS="$PID"
+sleep 1
+
echo "Using ldapsearch to check that slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \
fi
echo "Starting slapd on TCP/IP port $PORT2..."
-. $CONFFILTER $BACKEND $MONITORDB < $METACONF > $CONF2
+. $CONFFILTER $BACKEND $MONITORDB < $METACONF2 > $CONF2
$SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
PID=$!
if test $WAIT != 0 ; then
fi
KILLPIDS="$KILLPIDS $PID"
+sleep 1
+
echo "Using ldapsearch to check that slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \
exit $RC
fi
+echo "Starting slapd on TCP/IP port $PORT3..."
+. $CONFFILTER $BACKEND $MONITORDB < $METACONF > $CONF3
+$SLAPD -f $CONF3 -h $URI3 -d $LVL $TIMING > $LOG3 2>&1 &
+PID=$!
+if test $WAIT != 0 ; then
+ echo PID $PID
+ read foo
+fi
+KILLPIDS="$KILLPIDS $PID"
+
+sleep 1
+
+echo "Using ldapsearch to check that slapd is running..."
+for i in 0 1 2 3 4 5; do
+ $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT3 \
+ 'objectclass=*' > /dev/null 2>&1
+ RC=$?
+ if test $RC = 0 ; then
+ break
+ fi
+ echo "Waiting 5 seconds for slapd to start..."
+ sleep 5
+done
+if test $RC != 0 ; then
+ echo "ldapsearch failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
cat /dev/null > $SEARCHOUT
mkdir -p $TESTDIR/$DATADIR
sed -e "s;$BASEDN;$METABASEDN;" $f > $TESTDIR/$f
done
+# add a read that matches only the local database, but selects
+# also the remote as candidate; this should be removed to compare
+# execution times with test008...
for f in $TESTDIR/$DATADIR/do_read.* ; do
echo "ou=Meta,$METABASEDN" >> $f
done
+# add a read that matches a referral in the local database only,
+# but selects also the remote as candidate; this should be removed
+# to compare execution times with test008...
+for f in $TESTDIR/$DATADIR/do_read.* ; do
+ echo "cn=Somewhere,ou=Meta,$METABASEDN" >> $f
+done
+
+# add a bind that resolves to a referral
+for f in $TESTDIR/$DATADIR/do_bind.* ; do
+ echo "cn=Foo,ou=Meta,$METABASEDN" >> $f
+ echo "bar" >> $f
+ echo "" >> $f
+ echo "" >> $f
+done
+
+# fix test data to include back-monitor, if available
+# NOTE: copies do_* files from $TESTDIR/$DATADIR to $TESTDIR
+$MONITORDATA "$MONITORDB" "$TESTDIR/$DATADIR" "$TESTDIR"
+
+BINDDN="cn=Manager,o=Local"
+PASSWD="secret"
echo "Using tester for concurrent server access..."
-$SLAPDTESTER -P "$PROGDIR" -d "$TESTDIR/$DATADIR" -h $LOCALHOST -p $PORT2 -D "cn=Manager,$METABASEDN" -w $PASSWD -l 100 -r 20
+$SLAPDTESTER -P "$PROGDIR" -d "$TESTDIR" -h $LOCALHOST -p $PORT3 \
+ -D "$BINDDN" -w $PASSWD -l $TESTLOOPS -j $TESTCHILDREN \
+ -r 20 -i '!REFERRAL' -i '*INVALID_CREDENTIALS' -SS
RC=$?
if test $RC != 0 ; then
fi
echo "Using ldapsearch to retrieve all the entries..."
-$LDAPSEARCH -S "" -b "$METABASEDN" -h $LOCALHOST -p $PORT2 \
+$LDAPSEARCH -S "" -b "$METABASEDN" -h $LOCALHOST -p $PORT3 \
'objectClass=*' > $SEARCHOUT 2>&1
RC=$?
fi
echo "Filtering ldapsearch results..."
-. $LDIFFILTER < $SEARCHOUT > $SEARCHFLT
+$LDIFFILTER < $SEARCHOUT > $SEARCHFLT
echo "Filtering original ldif used to create database..."
-. $LDIFFILTER < $METACONCURRENCYOUT > $LDIFFLT
+$LDIFFILTER < $METACONCURRENCYOUT > $LDIFFLT
echo "Comparing filter output..."
$CMP $SEARCHFLT $LDIFFLT > $CMPOUT
-
+
if test $? != 0 ; then
- echo "comparison failed - meta search/modification didn't succeed"
+ echo "comparison failed - slapd-meta search/modification didn't succeed"
exit 1
fi
echo ">>>>> Test succeeded"
-exit 0
+test $KILLSERVERS != no && wait
+
+exit 0