Axe slurpd / replog support

[openldap] / tests / scripts / test043-delta-syncrepl

diff --git a/tests/scripts/test043-delta-syncrepl b/tests/scripts/test043-delta-syncrepl
index 91bc77026419d8d30725c8acf1b66e595a5f172e..6138707b7e8200aedf9ebc3b3071ca7801f29312 100755 (executable)
--- a/tests/scripts/test043-delta-syncrepl
+++ b/tests/scripts/test043-delta-syncrepl
@@ -2,7 +2,7 @@
 # $OpenLDAP$
 ## This work is part of OpenLDAP Software <http://www.openldap.org/>.
 ##
-## Copyright 1998-2006 The OpenLDAP Foundation.
+## Copyright 1998-2007 The OpenLDAP Foundation.
 ## All rights reserved.
 ##
 ## Redistribution and use in source and binary forms, with or without
@@ -34,15 +34,15 @@ mkdir -p $TESTDIR $DBDIR1A $DBDIR1B $DBDIR2
 
 #
 # Test replication:
-# - start master
-# - start slave
+# - start producer
+# - start consumer
 # - populate over ldap
 # - perform some modifies and deleted
-# - attempt to modify the slave (referral or chain)
+# - attempt to modify the consumer (referral or chain)
 # - retrieve database over ldap and compare against expected results
 #
 
-echo "Starting master slapd on TCP/IP port $PORT1..."
+echo "Starting producer slapd on TCP/IP port $PORT1..."
 . $CONFFILTER $BACKEND $MONITORDB < $DSRMASTERCONF > $CONF1
 $SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
 PID=$!
@@ -54,7 +54,7 @@ KILLPIDS="$PID"
 
 sleep 1
 
-echo "Using ldapsearch to check that master slapd is running..."
+echo "Using ldapsearch to check that producer slapd is running..."
 for i in 0 1 2 3 4 5; do
        $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \
                'objectclass=*' > /dev/null 2>&1
@@ -72,7 +72,7 @@ if test $RC != 0 ; then
        exit $RC
 fi
 
-echo "Using ldapadd to create the context prefix entries in the master..."
+echo "Using ldapadd to create the context prefix entries in the producer..."
 $LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \
        $LDIFORDEREDCP > /dev/null 2>&1
 RC=$?
@@ -82,7 +82,7 @@ if test $RC != 0 ; then
        exit $RC
 fi
 
-echo "Starting slave slapd on TCP/IP port $PORT2..."
+echo "Starting consumer slapd on TCP/IP port $PORT2..."
 . $CONFFILTER $BACKEND $MONITORDB < $DSRSLAVECONF > $CONF2
 $SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
 SLAVEPID=$!
@@ -94,7 +94,7 @@ KILLPIDS="$KILLPIDS $SLAVEPID"
 
 sleep 1
 
-echo "Using ldapsearch to check that slave slapd is running..."
+echo "Using ldapsearch to check that consumer slapd is running..."
 for i in 0 1 2 3 4 5; do
        $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \
                'objectclass=*' > /dev/null 2>&1
@@ -112,7 +112,7 @@ if test $RC != 0 ; then
        exit $RC
 fi
 
-echo "Using ldapadd to populate the master directory..."
+echo "Using ldapadd to populate the producer directory..."
 $LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \
        $LDIFORDEREDNOCP > /dev/null 2>&1
 RC=$?
@@ -139,7 +139,7 @@ KILLPIDS="$PID $SLAVEPID"
 
 sleep 1
 
-echo "Using ldapsearch to check that master slapd is running..."
+echo "Using ldapsearch to check that producer slapd is running..."
 for i in 0 1 2 3 4 5; do
        $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \
                'objectclass=*' > /dev/null 2>&1
@@ -157,7 +157,7 @@ if test $RC != 0 ; then
        exit $RC
 fi
 
-echo "Using ldapmodify to modify master directory..."
+echo "Using ldapmodify to modify producer directory..."
 
 #
 # Do some modifications
@@ -235,7 +235,6 @@ dn: cn=James A Jones 2, ou=Information Technology Division, ou=People, dc=exampl
 changetype: delete
 
 EOMODS
-
 RC=$?
 if test $RC != 0 ; then
        echo "ldapmodify failed ($RC)!"
@@ -250,8 +249,8 @@ echo "Stopping consumer to test recovery..."
 kill -HUP $SLAVEPID
 sleep 10
 
-echo "Modifying more entries on the master..."
-$LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD >> \
+echo "Modifying more entries on the producer..."
+$LDAPMODIFY -v -D "$BJORNSDN" -h $LOCALHOST -p $PORT1 -w bjorn >> \
        $TESTOUT 2>&1 << EOMODS
 dn: cn=Rosco P. Coltrane, ou=Retired, ou=People, dc=example,dc=com
 changetype: delete
@@ -271,6 +270,12 @@ cn: Rosco P. Coltrane
 dn: cn=Mark Elliot,ou=Alumni Association,ou=People,dc=example,dc=com
 changetype: modify
 replace: drink
+
+dn: cn=All Staff,ou=Groups,dc=example,dc=com
+changetype: modrdn
+newrdn: cn=Some Staff
+deleteoldrdn: 1
+
 EOMODS
 
 echo "Restarting consumer..."
@@ -287,7 +292,7 @@ echo "Waiting 25 seconds for syncrepl to receive changes..."
 sleep 25
 
 if test ! $BACKLDAP = "ldapno" ; then
-       echo "Try updating the slave slapd..."
+       echo "Try updating the consumer slapd..."
        $LDAPMODIFY -v -D "$MANAGERDN" -h $LOCALHOST -p $PORT2 -w $PASSWD > \
                $TESTOUT 2>&1 << EOMODS
 dn: cn=James A Jones 1, ou=Alumni Association, ou=People, dc=example, dc=com
@@ -309,40 +314,40 @@ EOMODS
        sleep 15
 fi
 
-echo "Using ldapsearch to read all the entries from the master..."
+echo "Using ldapsearch to read all the entries from the producer..."
 $LDAPSEARCH -S "" -b "$BASEDN" -h $LOCALHOST -p $PORT1 \
-       'objectclass=*' > $MASTEROUT 2>&1
+       'objectclass=*' \* + > $MASTEROUT 2>&1
 RC=$?
 
 if test $RC != 0 ; then
-       echo "ldapsearch failed at master ($RC)!"
+       echo "ldapsearch failed at producer ($RC)!"
        test $KILLSERVERS != no && kill -HUP $KILLPIDS
        exit $RC
 fi
 
-echo "Using ldapsearch to read all the entries from the slave..."
+echo "Using ldapsearch to read all the entries from the consumer..."
 $LDAPSEARCH -S "" -b "$BASEDN" -h $LOCALHOST -p $PORT2 \
-       'objectclass=*' > $SLAVEOUT 2>&1
+       'objectclass=*' \* + > $SLAVEOUT 2>&1
 RC=$?
 
 if test $RC != 0 ; then
-       echo "ldapsearch failed at slave ($RC)!"
+       echo "ldapsearch failed at consumer ($RC)!"
        test $KILLSERVERS != no && kill -HUP $KILLPIDS
        exit $RC
 fi
 
 test $KILLSERVERS != no && kill -HUP $KILLPIDS
 
-echo "Filtering master results..."
-. $LDIFFILTER < $MASTEROUT > $MASTERFLT
-echo "Filtering slave results..."
-. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
+echo "Filtering producer results..."
+. $LDIFFILTER < $MASTEROUT | grep -iv "^auditcontext:" > $MASTERFLT
+echo "Filtering consumer results..."
+. $LDIFFILTER < $SLAVEOUT | grep -iv "^auditcontext:" > $SLAVEFLT
 
-echo "Comparing retrieved entries from master and slave..."
+echo "Comparing retrieved entries from producer and consumer..."
 $CMP $MASTERFLT $SLAVEFLT > $CMPOUT
 
 if test $? != 0 ; then
-       echo "test failed - master and slave databases differ"
+       echo "test failed - producer and consumer databases differ"
        exit 1
 fi