# $OpenLDAP$
## This work is part of OpenLDAP Software <http://www.openldap.org/>.
##
-## Copyright 1998-2009 The OpenLDAP Foundation.
+## Copyright 1998-2016 The OpenLDAP Foundation.
## All rights reserved.
##
## Redistribution and use in source and binary forms, with or without
fi
case "$SYNCMODE" in
ro)
- SYNCTYPE="type=refreshOnly interval=00:00:00:10"
+ SYNCTYPE="type=refreshOnly interval=00:00:00:03"
;;
rp)
SYNCTYPE="type=refreshAndPersist"
#
# Test replication of dynamic config:
-# - start producer
+# - start provider
# - start consumer
# - configure over ldap
# - populate over ldap
# - retrieve database over ldap and compare against expected results
#
-echo "Starting producer slapd on TCP/IP port $PORT1..."
+echo "Starting provider slapd on TCP/IP port $PORT1..."
. $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF
$SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
cd $PRODIR
sleep 1
-echo "Using ldapsearch to check that producer slapd is running..."
+echo "Using ldapsearch to check that provider slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI1 \
'objectclass=*' > /dev/null 2>&1
exit $RC
fi
-echo "Inserting syncprov overlay on producer..."
+echo "Inserting syncprov overlay on provider..."
if [ "$SYNCPROV" = syncprovmod ]; then
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1
dn: cn=module,cn=config
objectClass: olcModuleList
cn: module
-olcModulePath: ../../../servers/slapd/overlays
+olcModulePath: $TESTWD/../servers/slapd/overlays
olcModuleLoad: syncprov.la
EOF
RC=$?
add: olcSyncRepl
olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
- retry="5 5 300 5" timeout=3
+ retry="3 5 300 5" timeout=3
-
add: olcUpdateRef
olcUpdateRef: $URI1
add: olcSyncRepl
olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
- retry="5 5 300 5" timeout=3
+ retry="3 5 300 5" timeout=3
-
add: olcUpdateRef
olcUpdateRef: $URI1
EOF
-SLEEP=10
-echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
-sleep $SLEEP
+echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
+sleep $SLEEP1
echo "Using ldapsearch to check that syncrepl received config changes..."
RC=32
RC=0
break
fi
- echo "Waiting 5 seconds for syncrepl to receive changes..."
- sleep 5
+ echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
+ sleep $SLEEP1
done
if test $RC != 0 ; then
exit $RC
fi
-echo "Adding schema and databases on producer..."
+echo "Adding schema and databases on provider..."
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
include: file://$ABS_SCHEMADIR/core.ldif
exit $RC
fi
+nullExclude="" nullOK=""
+test $BACKEND = null && nullExclude="# " nullOK="OK"
+
if [ "$BACKENDTYPE" = mod ]; then
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
dn: cn=module,cn=config
objectClass: olcModuleList
cn: module
-olcModulePath: ../../../servers/slapd/back-$BACKEND
+olcModulePath: $TESTWD/../servers/slapd/back-$BACKEND
olcModuleLoad: back_$BACKEND.la
EOF
RC=$?
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
dn: olcDatabase={1}$BACKEND,cn=config
objectClass: olcDatabaseConfig
-objectClass: olc${BACKEND}Config
+${nullExclude}objectClass: olc${BACKEND}Config
olcDatabase: {1}$BACKEND
olcSuffix: $BASEDN
-olcDbDirectory: ./db
+${nullExclude}olcDbDirectory: ./db
olcRootDN: $MANAGERDN
olcRootPW: $PASSWD
olcSyncRepl: rid=002 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
- retry="5 5 300 5" timeout=3
+ retry="3 5 300 5" timeout=3
olcUpdateRef: $URI1
dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config
exit $RC
fi
-case $BACKEND in
-bdb | hdb)
+if test $INDEXDB = indexdb ; then
$LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
dn: olcDatabase={1}$BACKEND,cn=config
changetype: modify
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
- ;;
-esac
+fi
-echo "Using ldapadd to populate producer..."
+echo "Using ldapadd to populate provider..."
$LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \
>> $TESTOUT 2>&1
RC=$?
exit $RC
fi
-SLEEP=20
-echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
-sleep $SLEEP
+echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
+sleep $SLEEP1
echo "Using ldapsearch to check that syncrepl received database changes..."
RC=32
RESULT=`$LDAPSEARCH -H $URI2 \
-s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
'(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
- if test "x$RESULT" = "xOK" ; then
+ if test "x$RESULT$nullOK" = "xOK" ; then
RC=0
break
fi
- echo "Waiting 5 seconds for syncrepl to receive changes..."
- sleep 5
+ echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
+ sleep $SLEEP1
done
if test $RC != 0 ; then
exit $RC
fi
-echo "Replacing olcSyncrepl on producer..."
+echo "Replacing olcSyncrepl on provider..."
$LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
dn: olcDatabase={0}config,cn=config
changetype: modify
echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..."
sleep $SLEEP1
-echo "Using ldapsearch to read config from the producer..."
+echo "Using ldapsearch to read config from the provider..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
'objectclass=*' > $MASTEROUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at producer ($RC)!"
+ echo "ldapsearch failed at provider ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
exit $RC
fi
-echo "Filtering producer results..."
-. $LDIFFILTER < $MASTEROUT > $MASTERFLT
+echo "Filtering provider results..."
+$LDIFFILTER < $MASTEROUT > $MASTERFLT
echo "Filtering consumer results..."
-. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
+$LDIFFILTER < $SLAVEOUT > $SLAVEFLT
-echo "Comparing retrieved configs from producer and consumer..."
+echo "Comparing retrieved configs from provider and consumer..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
- echo "test failed - producer and consumer configs differ"
+ echo "test failed - provider and consumer configs differ"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit 1
fi
-echo "Using ldapsearch to read all the entries from the producer..."
+echo "Using ldapsearch to read all the entries from the provider..."
$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \
'objectclass=*' > $MASTEROUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at producer ($RC)!"
+ echo "ldapsearch failed at provider ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
test $KILLSERVERS != no && kill -HUP $KILLPIDS
-echo "Filtering producer results..."
-. $LDIFFILTER < $MASTEROUT > $MASTERFLT
+echo "Filtering provider results..."
+$LDIFFILTER < $MASTEROUT > $MASTERFLT
echo "Filtering consumer results..."
-. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
+$LDIFFILTER < $SLAVEOUT > $SLAVEFLT
-echo "Comparing retrieved entries from producer and consumer..."
+echo "Comparing retrieved entries from provider and consumer..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
- echo "test failed - producer and consumer databases differ"
+ echo "test failed - provider and consumer databases differ"
exit 1
fi