DBCON=$CONDIR/db
CFPRO=$PRODIR/slapd.d
CFCON=$CONDIR/slapd.d
-LOG1=./slapd.1.log
-LOG2=./slapd.2.log
mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON
+$SLAPPASSWD -g -n >$CONFIGPWF
+
#
# Test replication of dynamic config:
-# - start master
-# - start slave
+# - start producer
+# - start consumer
# - configure over ldap
# - populate over ldap
# - configure syncrepl over ldap
# - retrieve database over ldap and compare against expected results
#
-echo "Starting master slapd on TCP/IP port $PORT1..."
-$SLAPADD -F $CFPRO -n 0 -l $DYNAMICCONF
+echo "Starting producer slapd on TCP/IP port $PORT1..."
+. $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF
+$SLAPADD -F $CFPRO -n 0 -l $CONFLDIF
cd $PRODIR
-../../$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
+$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
PID=$!
if test $WAIT != 0 ; then
echo PID $PID
read foo
fi
KILLPIDS="$PID"
-cd ../..
+cd $TESTWD
sleep 1
-echo "Using ldapsearch to check that master slapd is running..."
+echo "Using ldapsearch to check that producer slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI1 \
'objectclass=*' > /dev/null 2>&1
exit $RC
fi
-echo "Inserting syncprov overlay on master..."
+echo "Inserting syncprov overlay on producer..."
if [ "$SYNCPROV" = syncprovmod ]; then
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1
dn: cn=module,cn=config
exit $RC
fi
fi
-CONFIGPW=`cat $CONFIGPWF`
+read CONFIGPW < $CONFIGPWF
$LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
dn: olcDatabase={0}config,cn=config
changetype: modify
exit $RC
fi
-echo "Starting slave slapd on TCP/IP port $PORT2..."
-$SLAPADD -F $CFCON -n 0 -l $DYNAMICCONF
+echo "Starting consumer slapd on TCP/IP port $PORT2..."
+$SLAPADD -F $CFCON -n 0 -l $CONFLDIF
cd $CONDIR
-../../$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
+$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
SLAVEPID=$!
if test $WAIT != 0 ; then
echo SLAVEPID $SLAVEPID
read foo
fi
KILLPIDS="$KILLPIDS $SLAVEPID"
-cd ../..
+cd $TESTWD
sleep 1
-echo "Using ldapsearch to check that slave slapd is running..."
+echo "Using ldapsearch to check that consumer slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI2 \
'objectclass=*' > /dev/null 2>&1
exit $RC
fi
-echo "Configuring syncrepl on slave..."
+echo "Configuring syncrepl on consumer..."
$LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
dn: olcDatabase={0}config,cn=config
changetype: modify
olcUpdateRef: $URI1
EOF
-echo "Waiting 10 seconds for syncrepl to receive changes..."
-sleep 10
+SLEEP=10
+echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
+sleep $SLEEP
+
+echo "Using ldapsearch to check that syncrepl received config changes..."
+RC=32
+for i in 0 1 2 3 4 5; do
+ RESULT=`$LDAPSEARCH -H $URI2 -D cn=config -y $CONFIGPWF \
+ -s base -b "olcDatabase={0}config,cn=config" \
+ '(olcUpdateRef=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
+ if test "x$RESULT" = "xOK" ; then
+ RC=0
+ break
+ fi
+ echo "Waiting 5 seconds for syncrepl to receive changes..."
+ sleep 5
+done
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
-echo "Adding schema and databases on master..."
+echo "Adding schema and databases on producer..."
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
-include: file:$SCHEMADIR/core.ldif
+include: file://$ABS_SCHEMADIR/core.ldif
-include: file:$SCHEMADIR/cosine.ldif
+include: file://$ABS_SCHEMADIR/cosine.ldif
-include: file:$SCHEMADIR/inetorgperson.ldif
+include: file://$ABS_SCHEMADIR/inetorgperson.ldif
-include: file:$SCHEMADIR/openldap.ldif
+include: file://$ABS_SCHEMADIR/openldap.ldif
-include: file:$SCHEMADIR/nis.ldif
+include: file://$ABS_SCHEMADIR/nis.ldif
EOF
RC=$?
if test $RC != 0 ; then
exit $RC
fi
-echo "Using ldapadd to populate master..."
+echo "Using ldapadd to populate producer..."
$LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \
>> $TESTOUT 2>&1
RC=$?
exit $RC
fi
-echo "Waiting 20 seconds for syncrepl to receive changes..."
-sleep 20
+SLEEP=20
+echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
+sleep $SLEEP
+
+echo "Using ldapsearch to check that syncrepl received database changes..."
+RC=32
+for i in 0 1 2 3 4 5; do
+ RESULT=`$LDAPSEARCH -H $URI2 \
+ -s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
+ '(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
+ if test "x$RESULT" = "xOK" ; then
+ RC=0
+ break
+ fi
+ echo "Waiting 5 seconds for syncrepl to receive changes..."
+ sleep 5
+done
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
-echo "Using ldapsearch to read config from the master..."
+echo "Using ldapsearch to read config from the producer..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
'objectclass=*' > $MASTEROUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at master ($RC)!"
+ echo "ldapsearch failed at producer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
-echo "Using ldapsearch to read config from the slave..."
+echo "Using ldapsearch to read config from the consumer..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \
'objectclass=*' > $SLAVEOUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at slave ($RC)!"
+ echo "ldapsearch failed at consumer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
-echo "Filtering master results..."
+echo "Filtering producer results..."
. $LDIFFILTER < $MASTEROUT > $MASTERFLT
-echo "Filtering slave results..."
+echo "Filtering consumer results..."
. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
-echo "Comparing retrieved entries from master and slave..."
+echo "Comparing retrieved configs from producer and consumer..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
- echo "test failed - master and slave databases differ"
+ echo "test failed - producer and consumer configs differ"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit 1
fi
-echo "Using ldapsearch to read all the entries from the master..."
+echo "Using ldapsearch to read all the entries from the producer..."
$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \
'objectclass=*' > $MASTEROUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at master ($RC)!"
+ echo "ldapsearch failed at producer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
-echo "Using ldapsearch to read all the entries from the slave..."
+echo "Using ldapsearch to read all the entries from the consumer..."
$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \
'objectclass=*' > $SLAVEOUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at slave ($RC)!"
+ echo "ldapsearch failed at consumer ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
test $KILLSERVERS != no && kill -HUP $KILLPIDS
-echo "Filtering master results..."
+echo "Filtering producer results..."
. $LDIFFILTER < $MASTEROUT > $MASTERFLT
-echo "Filtering slave results..."
+echo "Filtering consumer results..."
. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
-echo "Comparing retrieved entries from master and slave..."
+echo "Comparing retrieved entries from producer and consumer..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
- echo "test failed - master and slave databases differ"
+ echo "test failed - producer and consumer databases differ"
exit 1
fi
projects / openldap / blobdiff