# $OpenLDAP$
## This work is part of OpenLDAP Software <http://www.openldap.org/>.
##
-## Copyright 1998-2007 The OpenLDAP Foundation.
+## Copyright 1998-2008 The OpenLDAP Foundation.
## All rights reserved.
##
## Redistribution and use in source and binary forms, with or without
PRODIR=$TESTDIR/pro
CONDIR=$TESTDIR/con
+CONDIR2=$TESTDIR/con2
DBPRO=$PRODIR/db
DBCON=$CONDIR/db
+DBCON2=$CONDIR2/db
CFPRO=$PRODIR/slapd.d
CFCON=$CONDIR/slapd.d
-LOG1=slapd.1.log
-LOG2=slapd.2.log
+CFCON2=$CONDIR2/slapd.d
-mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON
+SYNCTYPE="type=refreshOnly interval=00:00:00:10"
+#SYNCTYPE="type=refreshAndPersist"
+
+mkdir -p $TESTDIR $PRODIR $CONDIR $CONDIR2 $DBPRO $DBCON $DBCON2 $CFPRO $CFCON $CFCON2
+
+$SLAPPASSWD -g -n >$CONFIGPWF
#
# Test replication of dynamic config:
# - start producer
-# - start consumer
+# - start consumer1
+# - start consumer2
# - configure over ldap
# - populate over ldap
# - configure syncrepl over ldap
#
echo "Initializing server configurations..."
+$SLAPADD -F $CFCON2 -n 0 <<EOF
+dn: cn=config
+objectClass: olcGlobal
+cn: config
+olcServerID: 3
+
+dn: olcDatabase={0}config,cn=config
+objectClass: olcDatabaseConfig
+olcDatabase: {0}config
+olcRootPW:< file://$CONFIGPWF
+EOF
+
$SLAPADD -F $CFCON -n 0 <<EOF
dn: cn=config
objectClass: olcGlobal
dn: olcDatabase={0}config,cn=config
objectClass: olcDatabaseConfig
olcDatabase: {0}config
-olcRootPW:< file:configpw
+olcRootPW:< file://$CONFIGPWF
EOF
$SLAPADD -F $CFPRO -n 0 <<EOF
dn: olcDatabase={0}config,cn=config
objectClass: olcDatabaseConfig
olcDatabase: {0}config
-olcRootPW:< file:configpw
+olcRootPW:< file://$CONFIGPWF
EOF
echo "Starting producer slapd on TCP/IP port $PORT1..."
cd $PRODIR
-$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > ../$LOG1 2>&1 &
+$SLAPD -F slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 &
PID=$!
if test $WAIT != 0 ; then
echo PID $PID
read foo
fi
KILLPIDS="$PID"
-cd ../..
+cd $TESTWD
sleep 1
# neither server will progress. The timeout will drop the syncrepl
# attempt and allow the modifies to complete.
#
-CONFIGPW=`cat $CONFIGPWF`
+read CONFIGPW < $CONFIGPWF
$LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1
dn: cn=config
changetype: modify
replace: olcServerID
olcServerID: 1 $URI1
olcServerID: 2 $URI2
+olcServerID: 3 $URI3
dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config
changetype: add
add: olcSyncRepl
olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
- retry="5 5 300 5" timeout=1
+ retry="5 5 300 5" timeout=3
olcSyncRepl: rid=002 provider=$URI2 binddn="cn=config" bindmethod=simple
credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
- retry="5 5 300 5" timeout=1
+ retry="5 5 300 5" timeout=3
+olcSyncRepl: rid=003 provider=$URI3 binddn="cn=config" bindmethod=simple
+ credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
+ retry="5 5 300 5" timeout=3
-
add: olcMirrorMode
olcMirrorMode: TRUE
exit $RC
fi
-echo "Starting consumer slapd on TCP/IP port $PORT2..."
+echo "Starting consumer1 slapd on TCP/IP port $PORT2..."
cd $CONDIR
-$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > ../$LOG2 2>&1 &
+$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 &
SLAVEPID=$!
if test $WAIT != 0 ; then
echo SLAVEPID $SLAVEPID
read foo
fi
KILLPIDS="$KILLPIDS $SLAVEPID"
-cd ../..
+cd $TESTWD
sleep 1
-echo "Using ldapsearch to check that consumer slapd is running..."
+echo "Using ldapsearch to check that consumer1 slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI2 \
'objectclass=*' > /dev/null 2>&1
exit $RC
fi
-echo "Configuring syncrepl on consumer..."
+echo "Configuring syncrepl on consumer1..."
$LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
dn: olcDatabase={0}config,cn=config
changetype: modify
add: olcSyncRepl
olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
- retry="5 5 300 5" timeout=1
+ retry="5 5 300 5" timeout=3
olcSyncRepl: rid=002 provider=$URI2 binddn="cn=config" bindmethod=simple
credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
- retry="5 5 300 5" timeout=1
+ retry="5 5 300 5" timeout=3
+olcSyncRepl: rid=003 provider=$URI3 binddn="cn=config" bindmethod=simple
+ credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
+ retry="5 5 300 5" timeout=3
+-
+add: olcMirrorMode
+olcMirrorMode: TRUE
+EOF
+
+echo "Starting consumer2 slapd on TCP/IP port $PORT3..."
+cd $CONDIR2
+$SLAPD -F ./slapd.d -h $URI3 -d $LVL $TIMING > $LOG3 2>&1 &
+SLAVE2PID=$!
+if test $WAIT != 0 ; then
+ echo SLAVE2PID $SLAVE2PID
+ read foo
+fi
+KILLPIDS="$KILLPIDS $SLAVE2PID"
+cd $TESTWD
+
+sleep 1
+
+echo "Using ldapsearch to check that consumer2 slapd is running..."
+for i in 0 1 2 3 4 5; do
+ $LDAPSEARCH -s base -b "" -H $URI3 \
+ 'objectclass=*' > /dev/null 2>&1
+ RC=$?
+ if test $RC = 0 ; then
+ break
+ fi
+ echo "Waiting 5 seconds for slapd to start..."
+ sleep 5
+done
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
+echo "Configuring syncrepl on consumer2..."
+$LDAPMODIFY -D cn=config -H $URI3 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
+dn: olcDatabase={0}config,cn=config
+changetype: modify
+add: olcSyncRepl
+olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple
+ credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
+ retry="5 5 300 5" timeout=3
+olcSyncRepl: rid=002 provider=$URI2 binddn="cn=config" bindmethod=simple
+ credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
+ retry="5 5 300 5" timeout=3
+olcSyncRepl: rid=003 provider=$URI3 binddn="cn=config" bindmethod=simple
+ credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist
+ retry="5 5 300 5" timeout=3
-
add: olcMirrorMode
olcMirrorMode: TRUE
echo "Adding schema and databases on producer..."
$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1
-include: file:$SCHEMADIR/core.ldif
+include: file://$ABS_SCHEMADIR/core.ldif
-include: file:$SCHEMADIR/cosine.ldif
+include: file://$ABS_SCHEMADIR/cosine.ldif
-include: file:$SCHEMADIR/inetorgperson.ldif
+include: file://$ABS_SCHEMADIR/inetorgperson.ldif
-include: file:$SCHEMADIR/openldap.ldif
+include: file://$ABS_SCHEMADIR/openldap.ldif
-include: file:$SCHEMADIR/nis.ldif
+include: file://$ABS_SCHEMADIR/nis.ldif
EOF
RC=$?
if test $RC != 0 ; then
olcDbDirectory: ./db
olcRootDN: $MANAGERDN
olcRootPW: $PASSWD
-olcSyncRepl: rid=003 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
- credentials=$PASSWD searchbase="$BASEDN" type=refreshOnly
- interval=00:00:00:10 retry="5 5 300 5" timeout=1
-olcSyncRepl: rid=004 provider=$URI2 binddn="$MANAGERDN" bindmethod=simple
- credentials=$PASSWD searchbase="$BASEDN" type=refreshOnly
- interval=00:00:00:10 retry="5 5 300 5" timeout=1
+olcSyncRepl: rid=004 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple
+ credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
+ retry="5 5 300 5" timeout=3
+olcSyncRepl: rid=005 provider=$URI2 binddn="$MANAGERDN" bindmethod=simple
+ credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
+ retry="5 5 300 5" timeout=3
+olcSyncRepl: rid=006 provider=$URI3 binddn="$MANAGERDN" bindmethod=simple
+ credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE
+ retry="5 5 300 5" timeout=3
olcMirrorMode: TRUE
dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config
>> $TESTOUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapadd failed for database config ($RC)!"
+ echo "ldapadd failed for producer database ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
+SLEEP=20
+echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
+sleep $SLEEP
+
+echo "Using ldapadd to populate consumer1..."
+$LDAPADD -D "$MANAGERDN" -H $URI2 -w $PASSWD -f $LDIFADD1 \
+ >> $TESTOUT 2>&1
+RC=$?
+if test $RC != 0 ; then
+ echo "ldapadd failed for consumer1 database ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
+SLEEP=20
+echo "Waiting $SLEEP seconds for syncrepl to receive changes..."
+sleep $SLEEP
+
+echo "Using ldapadd to populate consumer2..."
+$LDAPADD -D "$MANAGERDN" -H $URI3 -w $PASSWD \
+ << EOMODS >> $TESTOUT 2>&1
+dn: cn=Consumer 2 Test,dc=example,dc=com
+changetype: add
+objectClass: device
+cn: Consumer 2 Test
+EOMODS
+RC=$?
+if test $RC != 0 ; then
+ echo "ldapadd failed for consumer2 database ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
exit $RC
fi
+echo "Using ldapsearch to check that syncrepl received database changes on consumer2..."
+RC=32
+for i in 0 1 2 3 4 5; do
+ RESULT=`$LDAPSEARCH -H $URI3 \
+ -s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \
+ '(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'`
+ if test "x$RESULT" = "xOK" ; then
+ RC=0
+ break
+ fi
+ echo "Waiting 5 seconds for syncrepl to receive changes..."
+ sleep 5
+done
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
echo "Using ldapsearch to read config from the producer..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \
'objectclass=*' > $MASTEROUT 2>&1
exit $RC
fi
-echo "Using ldapsearch to read config from the consumer..."
+echo "Using ldapsearch to read config from consumer1..."
$LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \
'objectclass=*' > $SLAVEOUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at consumer ($RC)!"
+ echo "ldapsearch failed at consumer1 ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
+echo "Using ldapsearch to read config from consumer2..."
+$LDAPSEARCH -b cn=config -D cn=config -H $URI3 -y $CONFIGPWF \
+ 'objectclass=*' > $SLAVE2OUT 2>&1
+RC=$?
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed at consumer2 ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
echo "Filtering producer results..."
. $LDIFFILTER < $MASTEROUT > $MASTERFLT
-echo "Filtering consumer results..."
+echo "Filtering consumer1 results..."
. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
+echo "Filtering consumer2 results..."
+. $LDIFFILTER < $SLAVE2OUT > $SLAVE2FLT
-echo "Comparing retrieved configs from producer and consumer..."
+echo "Comparing retrieved configs from producer and consumer1..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
- echo "test failed - producer and consumer configs differ"
+ echo "test failed - producer and consumer1 configs differ"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit 1
+fi
+
+echo "Comparing retrieved configs from producer and consumer2..."
+$CMP $MASTERFLT $SLAVE2FLT > $CMPOUT
+
+if test $? != 0 ; then
+ echo "test failed - producer and consumer2 configs differ"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit 1
fi
exit $RC
fi
-echo "Using ldapsearch to read all the entries from the consumer..."
+echo "Using ldapsearch to read all the entries from consumer1..."
$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \
'objectclass=*' > $SLAVEOUT 2>&1
RC=$?
if test $RC != 0 ; then
- echo "ldapsearch failed at consumer ($RC)!"
+ echo "ldapsearch failed at consumer1 ($RC)!"
test $KILLSERVERS != no && kill -HUP $KILLPIDS
exit $RC
fi
-test $KILLSERVERS != no && kill -HUP $KILLPIDS
+echo "Using ldapsearch to read all the entries from consumer2..."
+$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI3 -w $PASSWD \
+ 'objectclass=*' > $SLAVE2OUT 2>&1
+RC=$?
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed at consumer2 ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
+# kill!
+# test $KILLSERVERS != no && kill -HUP $KILLPIDS
+kill -HUP $KILLPIDS
echo "Filtering producer results..."
. $LDIFFILTER < $MASTEROUT > $MASTERFLT
-echo "Filtering consumer results..."
+echo "Filtering consumer1 results..."
. $LDIFFILTER < $SLAVEOUT > $SLAVEFLT
+echo "Filtering consumer2 results..."
+. $LDIFFILTER < $SLAVE2OUT > $SLAVE2FLT
-echo "Comparing retrieved entries from producer and consumer..."
+echo "Comparing retrieved entries from producer and consumer1..."
$CMP $MASTERFLT $SLAVEFLT > $CMPOUT
if test $? != 0 ; then
- echo "test failed - producer and consumer databases differ"
+ echo "test failed - producer and consumer1 databases differ"
exit 1
fi
-test $KILLSERVERS != no && wait
+echo "Comparing retrieved entries from producer and consumer2..."
+$CMP $MASTERFLT $SLAVE2FLT > $CMPOUT
+
+if test $? != 0 ; then
+ echo "test failed - producer and consumer2 databases differ"
+ exit 1
+fi
+
+# kill!
+# test $KILLSERVERS != no && wait
+wait
echo "Restarting servers..."
echo "Starting producer slapd on TCP/IP port $PORT1..."
cd $PRODIR
-echo "======================= RESTART =======================" >> ../$LOG1
-$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING >> ../$LOG1 2>&1 &
+echo "======================= RESTART =======================" >> $LOG1
+$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING >> $LOG1 2>&1 &
PID=$!
if test $WAIT != 0 ; then
echo PID $PID
read foo
fi
KILLPIDS="$PID"
-cd ../..
+cd $TESTWD
echo "Using ldapsearch to check that producer slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI1 \
exit $RC
fi
#exit 0
-echo "Starting consumer slapd on TCP/IP port $PORT2..."
+echo "Starting consumer1 slapd on TCP/IP port $PORT2..."
cd $CONDIR
-echo "======================= RESTART =======================" >> ../$LOG2
-$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING >> ../$LOG2 2>&1 &
+echo "======================= RESTART =======================" >> $LOG2
+$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING >> $LOG2 2>&1 &
SLAVEPID=$!
if test $WAIT != 0 ; then
echo SLAVEPID $SLAVEPID
read foo
fi
KILLPIDS="$KILLPIDS $SLAVEPID"
-cd ../..
+cd $TESTWD
sleep 1
-echo "Using ldapsearch to check that consumer slapd is running..."
+echo "Using ldapsearch to check that consumer1 slapd is running..."
for i in 0 1 2 3 4 5; do
$LDAPSEARCH -s base -b "" -H $URI2 \
'objectclass=*' > /dev/null 2>&1
exit $RC
fi
+echo "Starting consumer2 slapd on TCP/IP port $PORT3..."
+cd $CONDIR2
+echo "======================= RESTART =======================" >> $LOG3
+$SLAPD -F ./slapd.d -h $URI3 -d $LVL $TIMING >> $LOG3 2>&1 &
+SLAVE2PID=$!
+if test $WAIT != 0 ; then
+ echo SLAVE2PID $SLAVE2PID
+ read foo
+fi
+KILLPIDS="$KILLPIDS $SLAVE2PID"
+cd $TESTWD
+
+sleep 1
+
+echo "Using ldapsearch to check that consumer2 slapd is running..."
+for i in 0 1 2 3 4 5; do
+ $LDAPSEARCH -s base -b "" -H $URI3 \
+ 'objectclass=*' > /dev/null 2>&1
+ RC=$?
+ if test $RC = 0 ; then
+ break
+ fi
+ echo "Waiting 5 seconds for slapd to start..."
+ sleep 5
+done
+
+if test $RC != 0 ; then
+ echo "ldapsearch failed ($RC)!"
+ test $KILLSERVERS != no && kill -HUP $KILLPIDS
+ exit $RC
+fi
+
# Insert modifications and more tests here.
SLEEP=10
echo "Waiting $SLEEP seconds for servers to resync..."
projects / openldap / blobdiff