X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=CHANGELOG;h=ff386c9c3a09921b1542d25f7ea9b2d739044be5;hb=71a4e5fda8b60044ab9f46069fa1cfa26bdd07ff;hp=441fe16c2a81bf8328a6c071facdc6d5c06d14c2;hpb=70864e6163c57d6d0722f4dc7242813d8bc21e30;p=u-boot diff --git a/CHANGELOG b/CHANGELOG index 441fe16c2a..ff386c9c3a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,701 @@ +commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 +Author: Gary Jennejohn +Date: Wed Jan 24 12:16:56 2007 +0100 + + Add port for the lpc2292sodimm evaluation board from EmbeddedArtists + +commit 2daf046ba627f85f44195815778140039636244e +Author: Bartlomiej Sieka +Date: Tue Jan 23 17:22:06 2007 +0100 + + [iDMR] Add MTD and JFFS2 support, also add default partition definition. + +commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 +Author: Bartlomiej Sieka +Date: Tue Jan 23 14:21:14 2007 +0100 + + [iDMR] Flash driver on initialisation write-protects some sectors, + currently sectors 0-3. Sector 3 does not need to be protected, though + (U-boot occupies sectors 0-1 and the environment sector 2). This commit + fixes this, i.e., only sectors 0-2 are protected. + +commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de +Author: Bartlomiej Sieka +Date: Tue Jan 23 14:11:22 2007 +0100 + + [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., + "mii device" results in "Unexpected exception"). Fixing this properly + requires some clean-up in the FEC drivers infrastructure for ColdFire, so + this commit disables MII commads for now. + +commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c +Author: Bartlomiej Sieka +Date: Tue Jan 23 13:25:22 2007 +0100 + + [ColdFire MCF5271 family] Add CPU detection based on the value of Chip + Identification Register (CIR). + +commit a4012396645533aef218354eeba754dff0deace8 +Author: Wolfgang Denk +Date: Fri Jan 19 23:08:39 2007 +0100 + + Minor code cleanup. + +commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 +Author: Heiko Schocher +Date: Fri Jan 19 19:57:10 2007 +0100 + + [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. + + Signed-off-by: Heiko Schocher + +commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 +Author: Heiko Schocher +Date: Fri Jan 19 18:05:26 2007 +0100 + + [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver + if you must swap the bytes between reading/writing. + (Needed for the SC3 board) + + Signed-off-by: Heiko Schocher + +commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 +Author: Stefan Roese +Date: Thu Jan 18 16:05:47 2007 +0100 + + [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board + + Signed-off-by: Stefan Roese + +commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e +Author: Stefan Roese +Date: Thu Jan 18 11:54:52 2007 +0100 + + [PATCH] Update Prodrive P3Mx support + + Signed-off-by: Stefan Roese + +commit 34167a36c29ee946b727465db5c014746a08e978 +Author: Stefan Roese +Date: Thu Jan 18 11:48:10 2007 +0100 + + [PATCH] Add missing Taishan config file + + Signed-off-by: Stefan Roese + +commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 +Author: Heiko Schocher +Date: Thu Jan 18 11:28:51 2007 +0100 + + [PATCH] Fix: Compilerwarnings for SC3 board. + The EBC Configuration Register is now by CFG_EBC_CFG definable + Added JFFS2 support for the SC3 board. + + Signed-off-by: Heiko Schocher + +commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd +Author: Stefan Roese +Date: Thu Jan 18 10:25:34 2007 +0100 + + [PATCH] Add support for AMCC Taishan PPC440GX eval board + + Signed-off-by: Stefan Roese + +commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad +Author: Wolfgang Denk +Date: Tue Jan 16 18:30:50 2007 +0100 + + Raname solidcard3 into sc3; add redundant env for sc3 + +commit 1bbbbdd20fcec9933697000dcf55ff7972622596 +Author: Wolfgang Denk +Date: Tue Jan 16 12:46:35 2007 +0100 + + Update default environment for Solidcard3 + +commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd +Author: Stefan Roese +Date: Mon Jan 15 09:46:29 2007 +0100 + + [PATCH] Fix 440SPe rev B detection from previous patch + + Signed-off-by: Stefan Roese + +commit a443d31410c571ee8f970da819a44d698fdd6b1f +Author: Heiko Schocher +Date: Sun Jan 14 13:35:31 2007 +0100 + + [FIX] correct I2C Writes for the LM81 Sensor. + + Signed-off-by: Heiko Schocher + +commit 0bba5452835f19a61204edcda3a58112fd8e2208 +Author: Wolfgang Denk +Date: Sat Jan 13 11:17:10 2007 +0100 + + Undo commit 3033ebb2: reset command does not take any arguments + + Haiying Wang's modification to the reset command was broken, undo it. + + Signed-off-by: Wolfgang Denk + +commit 95981778cff0038fd9941044d6a3eda810e33258 +Author: Stefan Roese +Date: Sat Jan 13 08:01:03 2007 +0100 + + [PATCH] Update 440SP(e) cpu revisions + + Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. + + Signed-off-by: Stefan Roese + +commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 +Author: Stefan Roese +Date: Sat Jan 13 07:59:56 2007 +0100 + + [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese + +commit 36adff362c2c0141ff8a810d42a7e478f779130f +Author: Stefan Roese +Date: Sat Jan 13 07:59:19 2007 +0100 + + [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese + +commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 +Author: Stefan Roese +Date: Sat Jan 13 07:57:51 2007 +0100 + + [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Signed-off-by: Stefan Roese + +commit ca43ba18e910206ef8063e4b22d282630bff3fd2 +Author: Heiko Schocher +Date: Thu Jan 11 15:44:44 2007 +0100 + + Added support for the SOLIDCARD III board from Eurodesign + + Signed-off-by: Heiko Schocher + +commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 +Author: Reinhard Thies +Date: Wed Jan 10 14:41:14 2007 +0100 + + Adjusted default environment for cam5200 board. + +commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 +Author: Wolfgang Denk +Date: Wed Jan 10 15:35:52 2007 +0100 + + Update CHANGELOG + +commit 787fa15860a57833e50bd30555079a9cd4e519b8 +Author: Wolfgang Denk +Date: Wed Jan 10 01:28:39 2007 +0100 + + Fix auto_update for MCC200 board. + + The invocation of do_auto_update() is moved to the end of the + misc_init_r() function, after the flash mappings have been + initialized. Please find attached a patch that implements that + change. + + Also correct the decoding of the keypad status. With this update, the + key that will trigger the update is Column 2, Row 2. + +commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 +Author: Marian Balakowicz +Date: Wed Jan 10 00:26:15 2007 +0100 + + CAM5200 flash driver modifications: + - use CFI driver (replaces custom flash driver) for main 'cam5200' target + - add second build target 'cam5200_niosflash' which still uses custom driver + +commit 67fea022fa957f59653b5238c7496f80a6b70432 +Author: Markus Klotzbuecher +Date: Tue Jan 9 16:02:48 2007 +0100 + + SPC1920: cleanup memory contoller setup + +commit 8fc2102faa23593c80381437c09f7745a14deb40 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:14 2007 +0100 + + Fix the cpu speed setup to work with all boards. + +commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: add support for the FM18L08 Ramtron FRAM + +commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: update the HPI register addresses to work with the second + generation of hardware + +commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:13 2007 +0100 + + Miscellanious spc1920 related cleanups + +commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:12 2007 +0100 + + SPC1920 GO/NOGO led should be set to color red in U-Boot + +commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:12 2007 +0100 + + Add support for the DS3231 RTC + +commit 8139567b60d678584b05f0718a681f2047c5e14f +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:11 2007 +0100 + + SMC1 uses external CLK4 instead of BRG on spc1920 + +commit d8d9de1a02fbd880b613d607143d1f57342affc7 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:10 2007 +0100 + + Update the SPC1920 CMB PLD driver + +commit 3f34f869162750e5e999fd140f884f5de952bcfe +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add / enable I2C support on the spc1920 board + +commit d28707dbce1e9ac2017ad051da4133bf22b4204f +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add support for the tms320671x host port interface (HPI) + +commit f4eb54529bb3664c3a562e488b460fe075f79d67 +Author: Wolfgang Denk +Date: Sun Jan 7 00:13:11 2007 +0100 + + Prepare for release 1.2.0 + +commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 +Author: Stefan Roese +Date: Sat Jan 6 15:58:09 2007 +0100 + + [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) + + This patch fixes a problem with an incorrect setup for the refresh + timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c + + Signed-off-by: Stefan Roese + +commit f16c1da9577f06c5fc08651a4065537407de4635 +Author: Stefan Roese +Date: Sat Jan 6 15:56:13 2007 +0100 + + [PATCH] Update ALPR board files + + This update brings the ALPR board support to the newest version. + It also fixes a problem with the NAND driver. + + Signed-off-by: Stefan Roese + +commit cd1d937f90250a32988c37b2b4af8364d25de8ed +Author: Stefan Roese +Date: Fri Jan 5 11:46:05 2007 +0100 + + [PATCH] nand: Fix problem with oobsize calculation + + Here the description from Brian Brelsford : + + The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part + returns a 0x15. In the code fragment below bits [1:0] determine the + page size, it is ANDed via "(extid & 0x3)" then shifted out. The + next field is also ANDed with 0x3. However this is a one bit field + as defined in the Hynix and Samsung parts in the 4th ID byte that + determins the oobsize, not a two bit field. It works on Samsung as + bits[3:2] are 01. However for the Hynix there is a 11 in these two + bits, so the oob size gets messed up. + + I checked the correct linux code and the suggested fix from Brian is + also available in the linux nand mtd driver. + + Signed-off-by: Stefan Roese + +commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e +Author: Stefan Roese +Date: Fri Jan 5 10:40:36 2007 +0100 + + [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) + + This fix will make the MAL burst disabling patch for the Linux + EMAC driver obsolete. + + Signed-off-by: Stefan Roese + +commit 023889838282b6237b401664f22dd22dfba2c066 +Author: Stefan Roese +Date: Fri Jan 5 10:38:05 2007 +0100 + + [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board + + This code will optimize the DDR2 controller setup on a board specific + basis. + + Note: This code doesn't work right now on the NAND booting image for the + Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. + + Signed-off-by: Stefan Roese + +commit cce4acbb68398634b8d011ed7bb0d12269c84230 +Author: Bartlomiej Sieka +Date: Thu Dec 28 19:08:21 2006 +0100 + + Few V38B changes: + - fix a typo in V38B config file + - move watchdog initialisation earlier in the boot process + - add "wdt=off" to default kernel command line (disables kernel watchdog) + +commit 92eb729bad876725aeea908d2addba0800620840 +Author: Wolfgang Denk +Date: Wed Dec 27 01:26:13 2006 +0100 + + Fix bug in adaption of Stefano Babic's CFI driver patch. + +commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 +Author: Wolfgang Denk +Date: Sun Dec 24 01:42:57 2006 +0100 + + Minor code cleanup. + +commit d784fdb05900ada3686d5778783e1fb328e9fb66 +Author: Stefano Babic +Date: Tue Dec 12 00:22:42 2006 +0100 + + Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) + +commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 +Author: Stefan Roese +Date: Fri Dec 22 14:29:40 2006 +0100 + + [PATCH] Fix sequoia flash autodetection (finally correct) + + Now 32MByte and 64MByte FLASH is know to work and other + configurations should work too. + + Signed-off-by: Stefan Roese + +commit 82e5236a8b719543643fd26d5827938ab2b94818 +Author: Wolfgang Denk +Date: Fri Dec 22 10:30:26 2006 +0100 + + Minor code cleanup; update CHANGELOG. + +commit fa23044564091f05d9695beb7b5b9a931e7f41a4 +Author: Heiko Schocher +Date: Thu Dec 21 17:17:02 2006 +0100 + + Added support for the TQM8272 board from TQ + + Signed-off-by: Heiko Schocher + +commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c +Author: Heiko Schocher +Date: Thu Dec 21 16:14:48 2006 +0100 + + [PATCH] Add support for the UC101 board from MAN. + + Signed-off-by: Heiko Schocher + +commit c84bad0ef60e7055ab0bd49b93069509cecc382a +Author: Bartlomiej Sieka +Date: Wed Dec 20 00:29:43 2006 +0100 + + Fix to make the baudrate changes immediate for the MCF52x2 family. + +commit daa6e418bcc0c717752e8de939c213c790286096 +Author: Bartlomiej Sieka +Date: Wed Dec 20 00:27:32 2006 +0100 + + Preliminary support for the iDMR board (ColdFire). + +commit cdb97a6678826f85e7c69eae6a1c113d034c9b10 +Author: Andrei Safronov +Date: Fri Dec 8 16:23:08 2006 +0100 + + automatic update mechanism + +commit dd520bf314c7add4183c5191692180f576f96b60 +Author: Wolfgang Denk +Date: Thu Nov 30 18:02:20 2006 +0100 + + Code cleanup. + +commit 8d9a8610b8256331132227e9e6585c6bd5742787 +Author: Wolfgang Denk +Date: Thu Nov 30 01:54:07 2006 +0100 + + Code cleanup. Update CHANGELOG. + +commit 726e90aacf0b1ecb0e7055be574622fbe3e450ba +Author: Grant Likely +Date: Wed Nov 29 16:23:42 2006 +0100 + + [PATCH] [MPC52xx] Use IPB bus frequency for SOC peripherals + + The soc node of the mpc52xx needs to be loaded with the IPB bus frequency, + not the XLB frequency. + + This patch depends on the previous patches for MPC52xx device tree support + + Signed-off-by: Grant Likely + Signed-off-by: Sylvain Munaut + +commit 1eac2a71417b6675b11aace72102a2e7fde8f5c6 +Author: Stefan Roese +Date: Wed Nov 29 15:42:37 2006 +0100 + + [PATCH] Add support for Prodrive P3M750 & P3M7448 (P3Mx) boards + + This patch adds support for the Prodrive P3M750 (PPC750 & MV64460) + and the P3M7448 (MPC7448 & MV64460) PMC modules. Both modules are + quite similar and share the same board directory "prodrive/p3mx" + and the same config file "p3mx.h". + + Signed-off-by: Stefan Roese + +commit 1bdd46832aeb569f5e04b1f20f64318525b6525a +Author: Stefan Roese +Date: Wed Nov 29 12:53:15 2006 +0100 + + [PATCH] common/cmd_elf.c: Enable loadaddr as parameter in bootvx command + + In the bootvx command the load address was only read from the env + variable "loadaddr" and not optionally passed as paramter as described + in the help. This is fixed with this patch. The behaviour is now the + same as in the bootelf command. + + Signed-off-by: Stefan Roese + +commit 4e26f1074c3ac1bd8fd094f0dc4a1c4a0b15a592 +Author: Stefan Roese +Date: Wed Nov 29 12:03:57 2006 +0100 + + [PATCH] include/ppc440.h minor error affecting interrupts + + Fixed include/ppc440.c for UIC address Bug + + Corrects bug affecting the addresses for the universal interrupt + controller UIC2 and UIC3 on the PPC440 Epx, GRx, and SPE chips. + + Signed-off-by: Jeff Mann + Signed-off-by: Stefan Roese + +commit 1939d969443ccf316cab2bf32ab1027d4db5ba1a +Author: Joakim Tjernlund +Date: Tue Nov 28 16:17:27 2006 -0600 + + Make fsl-i2c not conflict with SOFT I2C + + Signed-off-by: Timur Tabi + +commit 14198bf768fdc958e3c1afd2404e5262208e98d7 +Author: Joakim Tjernlund +Date: Tue Nov 28 16:17:18 2006 -0600 + + Fix I2C master address initialization. + + Signed-off-by: Timur Tabi + +commit cf3d045e51ca8dcc6cf759827140861d6ac25c04 +Author: Kim Phillips +Date: Tue Nov 28 23:31:19 2006 -0600 + + Assign maintainers for mpc8349emds and mpc8360emds + + Dave for mpc8360emds, and me for mpc8349emds. + +commit 1aa934c81b77f2080d3ca4b226eab67b17a33961 +Author: Kim Phillips +Date: Tue Nov 28 23:28:33 2006 -0600 + + Eliminate gcc 4 'used uninitialized' warnings in drivers/qe/uccf.c + + give initial values for reg_num, shift, p_cmxucr in ucc_set_clk_src + since they are passed by reference to ucc_get_cmxucr_reg and assigned. + +commit e857a5bdb3954b896c0920cb9d8d2b1b9c107ce5 +Author: Timur Tabi +Date: Tue Nov 28 12:09:35 2006 -0600 + + mpc83xx: Miscellaneous code style fixes + + Implement various code style fixes and similar changes. + + Signed-off-by: Timur Tabi + +commit e59581c56ab5d6e0207ddac3b2c1d55cb36ec706 +Author: Stefan Roese +Date: Tue Nov 28 17:55:49 2006 +0100 + + [PATCH] Enable the IceCube/lite5200 variants to pass a device tree to Linux. + + This patch adds the code and configuration necessary to boot with an + arch/powerpc Linux kernel. + + Signed-off-by: Grant Likely + Acked-by: Jon Loeliger + +commit e732faec95a83cb468b4850ae807c8301dde8f6a +Author: Stefan Roese +Date: Tue Nov 28 16:09:24 2006 +0100 + + [PATCH] PPC4xx: 440SP Rev. C detection added + + Signed-off-by: Stefan Roese + +commit e7f3e9ff01fbd7fa72eb42a9675fbed6bc4736b0 +Author: Stefan Roese +Date: Tue Nov 28 11:04:45 2006 +0100 + + [PATCH] nand: Fix patch merge problem + + Signed-off-by: Stefan Roese + +commit 4f4b602ec7524a032bdf3c6d28c7f525a4a67eaa +Author: Wolfgang Denk +Date: Mon Nov 27 22:53:53 2006 +0100 + + Update CHANGELOG + +commit f6e495f54cdb8fe340b9c03deab40ad746d52fae +Author: Stefan Roese +Date: Mon Nov 27 17:43:25 2006 +0100 + + [PATCH] 4xx_enet.c: Correct the setting of zmiifer register + + Patch below corrects the setting of the zmiifer register, it was + overwritting the register rather than ORing the settings. + + Signed-off-by: Neil Wilson + Signed-off-by: Stefan Roese + +commit d1a72545296800b7e219f93104ad5836f0003d66 +Author: Stefan Roese +Date: Mon Nov 27 17:34:10 2006 +0100 + + [PATCH] Select NAND embedded environment from board configuration + + The current NAND Bootloader setup forces the environment + variables to be in line with the bootloader. This change + enables the configuration to be made in the board include + file instead so that it can be individually enabled. + + Signed-off-by: Nick Spence + Signed-off-by: Stefan Roese + +commit 15784862857c3c2214498defcfed84ff137fb81e +Author: Stefan Roese +Date: Mon Nov 27 17:22:19 2006 +0100 + + [PATCH] nand_wait() timeout fixes + + Two fixes for the nand_wait() function in + drivers/nand/nand_base.c: + + 1. Use correct timeouts. The original timeouts in Linux + source are 400ms and 20ms not 40s and 20s + + 2. Return correct error value in case of timeout. 0 is + interpreted as OK. + + Signed-off-by: Rui Sousa + Signed-off-by: Stefan Roese + +commit da5553b095bf04f4f109ad7e565dae3aba47b230 +Author: Stefan Roese +Date: Mon Nov 27 17:04:06 2006 +0100 + + [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel + + This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 + arguments to bootm. It removes the getenv("disable_of") test that used + to be used for this purpose. + + Signed-off-by: Grant Likely + Acked-by: Jon Loeliger + +commit a9398e018593782c5fa7d0741955fc1256b34c1e +Author: Wolfgang Denk +Date: Mon Nov 27 15:32:42 2006 +0100 + + Minor code cleanup. Update CHANGELOG. + +commit 1729b92cde575476684bffe819d0b7791b57bff2 +Author: Stefan Roese +Date: Mon Nov 27 14:52:04 2006 +0100 + + [PATCH] 4xx: Fix problem with board specific reset code (now for real) + + Signed-off-by: Stefan Roese + +commit cc5ee8a92a0e3ca6f727af71b8fd206460c7afd7 +Author: Stefan Roese +Date: Mon Nov 27 14:49:51 2006 +0100 + + [PATCH] alpr: remove unused board specific flash driver + + Signed-off-by: Stefan Roese + +commit 1f94d162e2b5f0edc28d9fb11482502c44d218e1 +Author: Stefan Roese +Date: Mon Nov 27 14:48:41 2006 +0100 + + [PATCH] 4xx: Fix problem with board specific reset code + + Signed-off-by: Stefan Roese + +commit ec0c2ec725aec9524a177a77ce75559e644a931a +Author: Stefan Roese +Date: Mon Nov 27 14:46:06 2006 +0100 + + [PATCH] Remove testing 4xx enet PHY setup + + Signed-off-by: Stefan Roese + +commit 1c2ce2262069510f31c7d3fd7efd3d58b8c0c148 +Author: Stefan Roese +Date: Mon Nov 27 14:12:17 2006 +0100 + + [PATCH] Update Prodrive ALPR board support (440GX) + + Signed-off-by: Stefan Roese + commit 78d620ebb5871d252270dedfad60c6568993b780 Author: Wolfgang Denk Date: Thu Nov 23 22:58:58 2006 +0100 @@ -77,6 +775,379 @@ Date: Mon Nov 6 17:06:36 2006 +0100 This fixes get_ram_size() problems on MPC5200 Rev. B boards. +commit be5e61815d5a1fac290ce9c0ef09cb6a8e4288fa +Author: Timur Tabi +Date: Fri Nov 3 19:15:00 2006 -0600 + + mpc83xx: Update 83xx to use fsl_i2c.c + + Update the 83xx tree to use I2C support in drivers/fsl_i2c.c. Delete + cpu/mpc83xx/i2c.c, include/asm-ppc/i2c.h, and all references to those files. + Added multiple I2C bus support to fsl_i2c.c. + + Signed-off-by: Timur Tabi + +commit d239d74b1c937984bc519083a8e7de373a390f06 +Author: Timur Tabi +Date: Fri Nov 3 12:00:28 2006 -0600 + + mpc83xx: Replace CFG_IMMRBAR with CFG_IMMR + + Replace all instances of CFG_IMMRBAR with CFG_IMMR, so that the 83xx + tree matches the other 8xxx trees. + + Signed-off-by: Timur Tabi + +commit f7fb2e703ec9688541416962724adff70a7322cb +Author: Kim Phillips +Date: Thu Nov 2 19:47:11 2006 -0600 + + mpc83xx: Lindent and clean up cpu/mpc83xx/speed.c + +commit 90f30a710a3c619b5405860a686c4ddfc495d4b6 +Author: Dave Liu +Date: Thu Nov 2 18:05:50 2006 -0600 + + mpc83xx: Fix the incorrect dcbz operation + + The 834x rev1.x silicon has one CPU5 errata. + + The issue is when the data cache locked with + HID0[DLOCK], the dcbz instruction looks like no-op inst. + + The right behavior of the data cache is when the data cache + Locked with HID0[DLOCK], the dcbz instruction allocates + new tags in cache. + + The 834x rev3.0 and later and 8360 have not this bug inside. + + So, when 834x rev3.0/8360 are working with ECC, the dcbz + instruction will corrupt the stack in cache, the processor will + checkstop reset. + + However, the 834x rev1.x can work with ECC with these code, + because the sillicon has this cache bug. The dcbz will not + corrupt the stack in cache. + Really, it is the fault code running on fault sillicon. + + This patch fix the incorrect dcbz operation. Instead of + CPU FP writing to initialise the ECC. + + CHANGELOG: + * Fix the incorrect dcbz operation instead of CPU FP + writing to initialise the ECC memory. Otherwise, it + will corrupt the stack in cache, The processor will checkstop + reset. + + Signed-off-by: Dave Liu + +commit bf0b542d6773a5a1cbce77691f009b06d9aeb57d +Author: Kim Phillips +Date: Wed Nov 1 00:10:40 2006 -0600 + + mpc83xx: add OF_FLAT_TREE bits to 83xx boards + + add ft_pci_setup, OF_CPU, OF_SOC, OF_TBCLK, and + STDOUT_PATH configuration bits to mpc8349emds, + mpc8349itx, and mpc8360emds board code. + + redo environment to use bootm with the fdtaddr + for booting ARCH=powerpc kernels by default, + and provide default fdtaddr values. + +commit 48041365b3420589ad464ebc7752e0053538b729 +Author: Kim Phillips +Date: Wed Nov 1 00:07:25 2006 -0600 + + mpc83xx: change ft code to modify local-mac-address property + + Update 83xx OF code to update local-mac-address properties + for ethernet instead of the obsolete 'address' property. + +commit 9ca880a250870a7d55754291b5591d2b5fe89b54 +Author: Timur Tabi +Date: Tue Oct 31 21:23:16 2006 -0600 + + mpc83xx: Fix dual I2C support for the MPC8349ITX, MPC8349EMDS, TQM834x, and MPC8360EMDS + + This patch also adds an improved I2C set_speed(), which handles all clock + frequencies. + + Signed-off-by: Timur Tabi + +commit ac4b5622ce050b5ee1e154b98df630d778661632 +Author: Dave Liu +Date: Tue Oct 31 19:54:59 2006 -0600 + + mpc83xx: add the README.mpc8360emds + + add doc/README.mpc8360emds to accompany the new board support + +commit 7737d5c658c606f999dfbe3e86b0fed49e5c50ef +Author: Dave Liu +Date: Fri Nov 3 12:11:15 2006 -0600 + + mpc83xx: add QE ethernet support + + this patch adds support for the QUICC Engine based UCC gigabit ethernet device. + +commit 5f8204394e39bbe8cd9f08b8f8d145b6c01f7c73 +Author: Dave Liu +Date: Fri Nov 3 19:33:44 2006 -0600 + + mpc83xx: Add MPC8360EMDS basic board support + + Add support for the Freescale MPC8360EMDS board. + Includes DDR, DUART, Local Bus, PCI. + +commit 23892e49352de74f7fac36ff90bb1be143d195e3 +Author: Dave Liu +Date: Tue Oct 31 19:30:40 2006 -0600 + + mpc83xx: add the QUICC Engine (QE) immap file + + common QE immap file. Also required for 8360. + +commit b701652a4992bdcc62fb1a6038a85beef9e55da4 +Author: Dave Liu +Date: Tue Oct 31 19:25:38 2006 -0600 + + mpc83xx: Add 8360 specifics to 83xx immap + + Mainly add QE device dependencies, with appropriate 8360 protection. + Lindent also run. + +commit 988833324a7fda482c8ac3ca23eb539f8232e404 +Author: Timur Tabi +Date: Tue Oct 31 19:14:41 2006 -0600 + + mpc83xx: Fix PCI, USB, bootargs for MPC8349E-mITX + + PREREQUISITE PATCHES: + + * This patch can only be applied after the following patches have been applied: + + 1) DNX#2006092142000015 "Add support for the MPC8349E-mITX 1/2" + 2) DNX#2006092142000024 "Add support for the MPC8349E-mITX 2/2" + + CHANGELOG: + + * For the 8349E-mITX, fix some size values in pci_init_board(), enable + the clock for the 2nd USB board (Linux kernel will hang otherwise), + and fix the CONFIG_BOOTARGS macro. + + Signed-off-by: Timur Tabi + +commit 2ad6b513b31070bd0c003792ed1c3e7f5d740357 +Author: Timur Tabi +Date: Tue Oct 31 18:44:42 2006 -0600 + + mpc83xx: Add support for the MPC8349E-mITX + + PREREQUISITE PATCHES: + + * This patch can only be applied after the following patches have been applied: + + 1) DNX#2006090742000024 "Add support for multiple I2C buses" + 2) DNX#2006090742000033 "Multi-bus I2C implementation of MPC834x" + 3) DNX#2006091242000041 "Additional MPC8349 support for multibus i2c" + 4) DNX#2006091242000078 "Add support for variable flash memory sizes on 83xx systems" + 5) DNX#2006091242000069 "Add support for Errata DDR6 on MPC 834x systems" + + CHANGELOG: + + * Add support for the Freescale MPC8349E-mITX reference design platform. + The second TSEC (Vitesse 7385 switch) is not supported at this time. + + Signed-off-by: Timur Tabi + +commit 183da6d9b446cc12123455844ad1187e2375626f +Author: Ben Warren +Date: Tue Sep 12 10:15:53 2006 -0400 + + Additional MPC8349 support for multibus i2c + + Hello, + + Here is a patch for a file that was accidentally left out of a previous + attempt. + + It accompanies the patch with ticket DNX#2006090742000024 + + CHANGELOG: + Change PCI initialization to use new multi-bus I2C API. + + regards, + Ben + +commit b24f119d672b709d153ff2ac091d4aa63ec6877d +Author: Ben Warren +Date: Thu Sep 7 16:51:04 2006 -0400 + + Multi-bus I2C implementation of MPC834x + + Hello, + + Attached is a patch implementing multiple I2C buses on the MPC834x CPU + family and the MPC8349EMDS board in particular. + This patch requires Patch 1 (Add support for multiple I2C buses). + Testing was performed on a 533MHz board. + + /*** Note: This patch replaces ticket DNX#2006083042000027 ***/ + + Signed-off-by: Ben Warren + + CHANGELOG: + Implemented driver-level code to support two I2C buses on the + MPC834x CPU family and the MPC8349EMDS board. Available I2C bus speeds + are 50kHz, 100kHz and 400kHz on each bus. + + regards, + Ben + +commit bb99ad6d8257bf828f150d40f507b30d80a4a7ae +Author: Ben Warren +Date: Thu Sep 7 16:50:54 2006 -0400 + + Add support for multiple I2C buses + + Hello, + + Attached is a patch providing support for multiple I2C buses at the + command level. The second part of the patch includes an implementation + for the MPC834x CPU and MPC8349EMDS board. + + /*** Note: This patch replaces ticket DNX#2006083042000018 ***/ + + Signed-off-by: Ben Warren + + Overview: + + 1. Include new 'i2c' command (based on USB implementation) using + CONFIG_I2C_CMD_TREE. + + 2. Allow multiple buses by defining CONFIG_I2C_MULTI_BUS. Note that + the commands to change bus number and speed are only available under the + new 'i2c' command mentioned in the first bullet. + + 3. The option CFG_I2C_NOPROBES has been expanded to work in multi-bus + systems. When CONFIG_I2C_MULTI_BUS is used, this option takes the form + of an array of bus-device pairs. Otherwise, it is an array of uchar. + + CHANGELOG: + Added new 'i2c' master command for all I2C interaction. This is + conditionally compiled with CONFIG_I2C_CMD_TREE. New commands added for + setting I2C bus speed as well as changing the active bus if the board + has more than one (conditionally compiled with + CONFIG_I2C_MULTI_BUS). Updated NOPROBE logic to handle multiple buses. + Updated README. + + regards, + Ben + +commit bed85caf872714ebf53013967a695c9d63acfc68 +Author: Timur Tabi +Date: Tue Oct 31 18:13:36 2006 -0600 + + mpc83xx: Add support for Errata DDR6 on MPC 834x systems + + CHANGELOG: + + * Errata DDR6, which affects all current MPC 834x processors, lists changes + required to maintain compatibility with various types of DDR memory. This + patch implements those changes. + + Signed-off-by: Timur Tabi + +commit afd6e470f639883002c7c59d562690a5cb0f4865 +Author: Timur Tabi +Date: Wed Oct 25 18:45:23 2006 -0500 + + mpc83xx: fix TQM build by defining a CFG_FLASH_SIZE for it + +commit 31068b7c4abeefcb2c8fd4fbeccc8ec6c6d0475a +Author: Timur Tabi +Date: Tue Aug 22 17:07:00 2006 -0500 + + mpc83xx: Add support for variable flash memory sizes on 83xx systems + + CHANGELOG: + + * On 83xx systems, use the CFG_FLASH_SIZE macro to program the LBC local access + window registers, instead of using a hard-coded value of 8MB. + + Signed-off-by: Timur Tabi + +commit 2fc34ae66e73fa7841d1a006dc1b5dcbc1f78965 +Author: Tanya Jiang +Date: Thu Aug 3 18:38:13 2006 +0800 + + mpc83xx: Unified TQM834x variable names with 83xx and consolidated macros + + Unified TQM834x variable names with 83xx and consolidated macro + in preparation for the 8360 and other upcoming 83xx devices. + + Signed-off-by: Tanya Jiang + +commit f6eda7f80ccc13d658020268c507d7173cf2e8aa +Author: Dave Liu +Date: Wed Oct 25 14:41:21 2006 -0500 + + mpc83xx: Changed to unified mpx83xx names and added common 83xx changes + + Incorporated the common unified variable names and the changes in preparation + for releasing mpc8360 patches. + + Signed-off-by: Dave Liu + +commit 3894c46c27c64891f93ac04edde86a9fa9758d92 +Author: Tanya Jiang +Date: Thu Aug 3 18:36:02 2006 +0800 + + mpc83xx: Fix missing build for mpc8349emds pci.c + + Make pci build for mpc8349emds + + Signed-off-by: Tanya Jiang + +commit 09a81ff740b29deea1e2ab08a3c2ac136c2e6219 +Author: Tanya Jiang +Date: Thu Aug 3 18:39:49 2006 +0800 + + mpc83xx: Removed unused file resetvec.S for mpc83xx cpu + + Removed unused file resetvec.S for mpc83xx cpu + + Signed-off-by: Tanya Jiang + +commit 04f899fc465c3e44f2b55ecc70618f5696fc0ddf +Author: Nick Spence +Date: Sat Sep 30 00:32:59 2006 -0700 + + NAND Flash verify across block boundaries + + This patch addresses a problem when CONFIG_MTD_NAND_VERIFY_WRITE is + defined + and the write crosses a block boundary. The pointer to the verification + buffer (bufstart) is not being updated to reflect the starting of the + new + block so the verification of the second block fails. + + CHANGELOG: + + * Fix NAND FLASH page verification across block boundaries + +commit f484dc791a3932537213c43c654cc1295c64b84c +Author: Nick Spence +Date: Thu Sep 7 07:39:46 2006 -0700 + + Added RGMII support to the TSECs and Marvell 881111 Phy + + Added a phy initialization to adjust the RGMII RX and TX timing + Always set the R100 bit in 100 BaseT mode regardless of the TSEC mode + + Signed-off-by: Nick Spence + commit c59200443072353044aa4bf737a5a60f9a9af231 Author: Wolfgang Denk Date: Thu Nov 2 15:15:01 2006 +0100 @@ -271,7 +1342,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500 If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory + image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically @@ -572,6 +1643,34 @@ Date: Tue Oct 10 17:02:22 2006 -0500 Fix whitespace and 80-col issues. +commit 5c912cb1c31266c66ca59b36f9b6f87296421d75 +Author: Stefan Roese +Date: Sat Oct 7 11:36:51 2006 +0200 + + CFG_NAND_QUIET_TEST added to not warn upon missing NAND device + Patch by Stefan Roese, 07 Oct 2006 + +commit 5bc528fa4da751d472397b308137238a6465afd2 +Author: Stefan Roese +Date: Sat Oct 7 11:35:25 2006 +0200 + + Update ALPR code (NAND support working now) + Patch by Stefan Roese, 07 Oct 2006 + +commit 77d5034847d328753b80c46b83f960a14a26f40e +Author: Stefan Roese +Date: Sat Oct 7 11:33:03 2006 +0200 + + Remove compile warnings in fpga code + Patch by Stefan Roese, 07 Oct 2006 + +commit f3443867e90d2979a7dd1c65b0d537777e1f9850 +Author: Stefan Roese +Date: Sat Oct 7 11:30:52 2006 +0200 + + Add CONFIG_BOARD_RESET to configure board specific reset function + Patch by Stefan Roese, 07 Oct 2006 + commit f55df18187e7a45cb73fec4370d12135e6691ae1 Author: John Traill Date: Fri Sep 29 08:23:12 2006 +0100 @@ -804,6 +1903,21 @@ Date: Wed Aug 16 10:54:09 2006 -0500 Signed-off-by: Matthew McClintock +commit 899620c2d66d4eef3b2a0034d062e71d45d886c9 +Author: Stefan Roese +Date: Tue Aug 15 14:22:35 2006 +0200 + + Add initial support for the ALPR board from Prodrive + NAND needs some additional testing + Patch by Heiko Schocher, 15 Aug 2006 + +commit f0ff4692ff3372dec55074a8eb444943ab095abb +Author: Stefan Roese +Date: Tue Aug 15 14:15:51 2006 +0200 + + Add FPGA Altera Cyclone 2 support + Patch by Heiko Schocher, 15 Aug 2006 + commit fecf1c7e4de1b2779edc18742b91c22bdc32b68b Author: Jon Loeliger Date: Mon Aug 14 15:33:38 2006 -0500