X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=CHANGELOG;h=ff386c9c3a09921b1542d25f7ea9b2d739044be5;hb=dd768162c2b3b17f4a350fe91424e06e2e8cbf54;hp=e0b9be9d2dd3225950c6f64df092fac473a52a63;hpb=82e5236a8b719543643fd26d5827938ab2b94818;p=u-boot diff --git a/CHANGELOG b/CHANGELOG index e0b9be9d2d..ff386c9c3a 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,437 @@ +commit 6bd2447ee47ee23c18d2b3c7ccd5a20f7626f5b3 +Author: Gary Jennejohn +Date: Wed Jan 24 12:16:56 2007 +0100 + + Add port for the lpc2292sodimm evaluation board from EmbeddedArtists + +commit 2daf046ba627f85f44195815778140039636244e +Author: Bartlomiej Sieka +Date: Tue Jan 23 17:22:06 2007 +0100 + + [iDMR] Add MTD and JFFS2 support, also add default partition definition. + +commit f7db33101fbc9c8f0a10738ce87034875a17aeb9 +Author: Bartlomiej Sieka +Date: Tue Jan 23 14:21:14 2007 +0100 + + [iDMR] Flash driver on initialisation write-protects some sectors, + currently sectors 0-3. Sector 3 does not need to be protected, though + (U-boot occupies sectors 0-1 and the environment sector 2). This commit + fixes this, i.e., only sectors 0-2 are protected. + +commit 0ed47bb119cd2c4c16edb2548789148f9e6dc9de +Author: Bartlomiej Sieka +Date: Tue Jan 23 14:11:22 2007 +0100 + + [iDMR] Using MII-related commands on iDRM board doesn't work now (e.g., + "mii device" results in "Unexpected exception"). Fixing this properly + requires some clean-up in the FEC drivers infrastructure for ColdFire, so + this commit disables MII commads for now. + +commit 363d1d8f9c99b63daef81f5985cab3fc00edde5c +Author: Bartlomiej Sieka +Date: Tue Jan 23 13:25:22 2007 +0100 + + [ColdFire MCF5271 family] Add CPU detection based on the value of Chip + Identification Register (CIR). + +commit a4012396645533aef218354eeba754dff0deace8 +Author: Wolfgang Denk +Date: Fri Jan 19 23:08:39 2007 +0100 + + Minor code cleanup. + +commit f539b7ba7d7ef6dd187c8209609001cb1cd95e39 +Author: Heiko Schocher +Date: Fri Jan 19 19:57:10 2007 +0100 + + [PATCH] SC3 board: added CFG_CMD_AUTOSCRIPT. + + Signed-off-by: Heiko Schocher + +commit d0b6e14087ddd8789f224a48e1d33f2a5df4d167 +Author: Heiko Schocher +Date: Fri Jan 19 18:05:26 2007 +0100 + + [PATCH] CFI: define CFG_WRITE_SWAPPED_DATA for the CFI-Flash driver + if you must swap the bytes between reading/writing. + (Needed for the SC3 board) + + Signed-off-by: Heiko Schocher + +commit 9d8d5a5bfb64768f29a0cb47fc37cd6f4c40e276 +Author: Stefan Roese +Date: Thu Jan 18 16:05:47 2007 +0100 + + [PATCH] Add support for Prodrive SCPU (PDNB3 variant) board + + Signed-off-by: Stefan Roese + +commit 0057d758e3e874cbe7f24745d0cce8c1cb6c207e +Author: Stefan Roese +Date: Thu Jan 18 11:54:52 2007 +0100 + + [PATCH] Update Prodrive P3Mx support + + Signed-off-by: Stefan Roese + +commit 34167a36c29ee946b727465db5c014746a08e978 +Author: Stefan Roese +Date: Thu Jan 18 11:48:10 2007 +0100 + + [PATCH] Add missing Taishan config file + + Signed-off-by: Stefan Roese + +commit cb4820725e9fc409c5cbc8e83054a6ed522d2111 +Author: Heiko Schocher +Date: Thu Jan 18 11:28:51 2007 +0100 + + [PATCH] Fix: Compilerwarnings for SC3 board. + The EBC Configuration Register is now by CFG_EBC_CFG definable + Added JFFS2 support for the SC3 board. + + Signed-off-by: Heiko Schocher + +commit 5fb692cae57d1710c8f52a427cf7f39a37383fcd +Author: Stefan Roese +Date: Thu Jan 18 10:25:34 2007 +0100 + + [PATCH] Add support for AMCC Taishan PPC440GX eval board + + Signed-off-by: Stefan Roese + +commit 6d3e0107235aa0e6a6dcb77f9884497280bf85ad +Author: Wolfgang Denk +Date: Tue Jan 16 18:30:50 2007 +0100 + + Raname solidcard3 into sc3; add redundant env for sc3 + +commit 1bbbbdd20fcec9933697000dcf55ff7972622596 +Author: Wolfgang Denk +Date: Tue Jan 16 12:46:35 2007 +0100 + + Update default environment for Solidcard3 + +commit 5a5c56986a9ccf71642c8b6374eb18487b15fecd +Author: Stefan Roese +Date: Mon Jan 15 09:46:29 2007 +0100 + + [PATCH] Fix 440SPe rev B detection from previous patch + + Signed-off-by: Stefan Roese + +commit a443d31410c571ee8f970da819a44d698fdd6b1f +Author: Heiko Schocher +Date: Sun Jan 14 13:35:31 2007 +0100 + + [FIX] correct I2C Writes for the LM81 Sensor. + + Signed-off-by: Heiko Schocher + +commit 0bba5452835f19a61204edcda3a58112fd8e2208 +Author: Wolfgang Denk +Date: Sat Jan 13 11:17:10 2007 +0100 + + Undo commit 3033ebb2: reset command does not take any arguments + + Haiying Wang's modification to the reset command was broken, undo it. + + Signed-off-by: Wolfgang Denk + +commit 95981778cff0038fd9941044d6a3eda810e33258 +Author: Stefan Roese +Date: Sat Jan 13 08:01:03 2007 +0100 + + [PATCH] Update 440SP(e) cpu revisions + + Also display enabled/disabled RAID 6 support for 440SP/440SPe PPC's. + + Signed-off-by: Stefan Roese + +commit 77ddc5b9afb325262fd88752ba430a1dded1f0c7 +Author: Stefan Roese +Date: Sat Jan 13 07:59:56 2007 +0100 + + [PATCH] Update Yellowstone (440GR) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese + +commit 36adff362c2c0141ff8a810d42a7e478f779130f +Author: Stefan Roese +Date: Sat Jan 13 07:59:19 2007 +0100 + + [PATCH] Update Yosemite (440EP) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Also the EBC initialising is now done via defines in the board config + file. + + Signed-off-by: Stefan Roese + +commit e0b9ea8c8a294de6a5350ae638879d24b5b709d6 +Author: Stefan Roese +Date: Sat Jan 13 07:57:51 2007 +0100 + + [PATCH] Update Sequoia (440EPx) to display board rev and PCI bus speed + + Now the board revision and the current PCI bus speed are printed after + the board message. + + Signed-off-by: Stefan Roese + +commit ca43ba18e910206ef8063e4b22d282630bff3fd2 +Author: Heiko Schocher +Date: Thu Jan 11 15:44:44 2007 +0100 + + Added support for the SOLIDCARD III board from Eurodesign + + Signed-off-by: Heiko Schocher + +commit 6abaee42621c07e81a2cd189ad4368b5e8c50280 +Author: Reinhard Thies +Date: Wed Jan 10 14:41:14 2007 +0100 + + Adjusted default environment for cam5200 board. + +commit bab5a90d4ccc1a46a8127b867fa59028cc623ad9 +Author: Wolfgang Denk +Date: Wed Jan 10 15:35:52 2007 +0100 + + Update CHANGELOG + +commit 787fa15860a57833e50bd30555079a9cd4e519b8 +Author: Wolfgang Denk +Date: Wed Jan 10 01:28:39 2007 +0100 + + Fix auto_update for MCC200 board. + + The invocation of do_auto_update() is moved to the end of the + misc_init_r() function, after the flash mappings have been + initialized. Please find attached a patch that implements that + change. + + Also correct the decoding of the keypad status. With this update, the + key that will trigger the update is Column 2, Row 2. + +commit d9384de2f571046e71081bae22b49e3d5ca2e3d5 +Author: Marian Balakowicz +Date: Wed Jan 10 00:26:15 2007 +0100 + + CAM5200 flash driver modifications: + - use CFI driver (replaces custom flash driver) for main 'cam5200' target + - add second build target 'cam5200_niosflash' which still uses custom driver + +commit 67fea022fa957f59653b5238c7496f80a6b70432 +Author: Markus Klotzbuecher +Date: Tue Jan 9 16:02:48 2007 +0100 + + SPC1920: cleanup memory contoller setup + +commit 8fc2102faa23593c80381437c09f7745a14deb40 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:14 2007 +0100 + + Fix the cpu speed setup to work with all boards. + +commit 9295acb77481cf099ef9b40e1fa2d145b3c7490c +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: add support for the FM18L08 Ramtron FRAM + +commit 38ccd2fdf3364a53fe80e9b365303ecdafc9e223 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:13 2007 +0100 + + SPC1920: update the HPI register addresses to work with the second + generation of hardware + +commit 5921e5313fc3eadd42770c2b99badd7fae5ecf1e +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:13 2007 +0100 + + Miscellanious spc1920 related cleanups + +commit e4c2d37adc8bb1bf69dcf600cbc6c75f916a6120 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:12 2007 +0100 + + SPC1920 GO/NOGO led should be set to color red in U-Boot + +commit 0be62728aac459ba268d6d752ed49ec0e2bc7348 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:12 2007 +0100 + + Add support for the DS3231 RTC + +commit 8139567b60d678584b05f0718a681f2047c5e14f +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:11 2007 +0100 + + SMC1 uses external CLK4 instead of BRG on spc1920 + +commit d8d9de1a02fbd880b613d607143d1f57342affc7 +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:10 2007 +0100 + + Update the SPC1920 CMB PLD driver + +commit 3f34f869162750e5e999fd140f884f5de952bcfe +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add / enable I2C support on the spc1920 board + +commit d28707dbce1e9ac2017ad051da4133bf22b4204f +Author: Markus Klotzbuecher +Date: Tue Jan 9 14:57:10 2007 +0100 + + Add support for the tms320671x host port interface (HPI) + +commit f4eb54529bb3664c3a562e488b460fe075f79d67 +Author: Wolfgang Denk +Date: Sun Jan 7 00:13:11 2007 +0100 + + Prepare for release 1.2.0 + +commit f07ae7a9daef27a3d0213a4f3fe39d5342173c02 +Author: Stefan Roese +Date: Sat Jan 6 15:58:09 2007 +0100 + + [PATCH] 44x: Fix problem with DDR controller setup (refresh rate) + + This patch fixes a problem with an incorrect setup for the refresh + timer of the 44x DDR controller in the file cpu/ppc4xx/sdram.c + + Signed-off-by: Stefan Roese + +commit f16c1da9577f06c5fc08651a4065537407de4635 +Author: Stefan Roese +Date: Sat Jan 6 15:56:13 2007 +0100 + + [PATCH] Update ALPR board files + + This update brings the ALPR board support to the newest version. + It also fixes a problem with the NAND driver. + + Signed-off-by: Stefan Roese + +commit cd1d937f90250a32988c37b2b4af8364d25de8ed +Author: Stefan Roese +Date: Fri Jan 5 11:46:05 2007 +0100 + + [PATCH] nand: Fix problem with oobsize calculation + + Here the description from Brian Brelsford : + + The Hynix part returns a 0x1d in the 4th ID byte. The Samsung part + returns a 0x15. In the code fragment below bits [1:0] determine the + page size, it is ANDed via "(extid & 0x3)" then shifted out. The + next field is also ANDed with 0x3. However this is a one bit field + as defined in the Hynix and Samsung parts in the 4th ID byte that + determins the oobsize, not a two bit field. It works on Samsung as + bits[3:2] are 01. However for the Hynix there is a 11 in these two + bits, so the oob size gets messed up. + + I checked the correct linux code and the suggested fix from Brian is + also available in the linux nand mtd driver. + + Signed-off-by: Stefan Roese + +commit a78bc443ae5a4a8ba87590587d5e35bf5a787b2e +Author: Stefan Roese +Date: Fri Jan 5 10:40:36 2007 +0100 + + [PATCH] Clear PLB4A0_ACR[WRP] on Sequoia (440EPx) + + This fix will make the MAL burst disabling patch for the Linux + EMAC driver obsolete. + + Signed-off-by: Stefan Roese + +commit 023889838282b6237b401664f22dd22dfba2c066 +Author: Stefan Roese +Date: Fri Jan 5 10:38:05 2007 +0100 + + [PATCH] Add DDR2 optimization code for Sequoia (440EPx) board + + This code will optimize the DDR2 controller setup on a board specific + basis. + + Note: This code doesn't work right now on the NAND booting image for the + Sequoia board, since it doesn't fit into the 4kBytes for the SPL image. + + Signed-off-by: Stefan Roese + +commit cce4acbb68398634b8d011ed7bb0d12269c84230 +Author: Bartlomiej Sieka +Date: Thu Dec 28 19:08:21 2006 +0100 + + Few V38B changes: + - fix a typo in V38B config file + - move watchdog initialisation earlier in the boot process + - add "wdt=off" to default kernel command line (disables kernel watchdog) + +commit 92eb729bad876725aeea908d2addba0800620840 +Author: Wolfgang Denk +Date: Wed Dec 27 01:26:13 2006 +0100 + + Fix bug in adaption of Stefano Babic's CFI driver patch. + +commit 9c0f42ecfe25f7ffce8ec7a815f03864d723ffe3 +Author: Wolfgang Denk +Date: Sun Dec 24 01:42:57 2006 +0100 + + Minor code cleanup. + +commit d784fdb05900ada3686d5778783e1fb328e9fb66 +Author: Stefano Babic +Date: Tue Dec 12 00:22:42 2006 +0100 + + Fix cfi failure with Spansion Flash (Spansion Flash Devices have a different offset to go into CFI mode) + +commit 1b3c360c235dc684ec06c2d5f183f0a282ce45e2 +Author: Stefan Roese +Date: Fri Dec 22 14:29:40 2006 +0100 + + [PATCH] Fix sequoia flash autodetection (finally correct) + + Now 32MByte and 64MByte FLASH is know to work and other + configurations should work too. + + Signed-off-by: Stefan Roese + +commit 82e5236a8b719543643fd26d5827938ab2b94818 +Author: Wolfgang Denk +Date: Fri Dec 22 10:30:26 2006 +0100 + + Minor code cleanup; update CHANGELOG. + +commit fa23044564091f05d9695beb7b5b9a931e7f41a4 +Author: Heiko Schocher +Date: Thu Dec 21 17:17:02 2006 +0100 + + Added support for the TQM8272 board from TQ + + Signed-off-by: Heiko Schocher + +commit 6dedf3d49dd14c3bf541c8ecee7ffaac5f0e1d6c +Author: Heiko Schocher +Date: Thu Dec 21 16:14:48 2006 +0100 + + [PATCH] Add support for the UC101 board from MAN. + + Signed-off-by: Heiko Schocher + commit c84bad0ef60e7055ab0bd49b93069509cecc382a Author: Bartlomiej Sieka Date: Wed Dec 20 00:29:43 2006 +0100 @@ -210,7 +644,7 @@ Date: Mon Nov 27 17:04:06 2006 +0100 [PATCH] Allow CONFIG_OF_FLAT_TREE to boot a non-arch/powerpc kernel This patch allows an arch/ppc kernel to be booted by just passing 1 or 2 - arguments to bootm. It removes the getenv("disable_of") test that used + arguments to bootm. It removes the getenv("disable_of") test that used to be used for this purpose. Signed-off-by: Grant Likely @@ -908,7 +1342,7 @@ Date: Tue Oct 24 23:47:37 2006 -0500 If a Multi-Image file contains a third image we try to use it as a device tree. The device tree image is assumed to be uncompressed in the - image file. We automatically allocate space for the device tree in memory + image file. We automatically allocate space for the device tree in memory and provide an 8k pad to allow more than a reasonable amount of growth. Additionally, a device tree that was contained in flash will now automatically