X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=README;h=ecb1710d01cca2decd4286f3584e19aecd3026b4;hb=63767071d977d428264769fe7923da6a59cb166b;hp=39a3042ce402939184aa170f2d7bc61fff7b3ba8;hpb=4f892924d238cc415891dbea336a0fdaff2f853b;p=u-boot

diff --git a/README b/README
index 39a3042ce4..ecb1710d01 100644
--- a/README
+++ b/README
@@ -127,7 +127,7 @@ releases in "stable" maintenance trees.
 Examples:
 	U-Boot v2009.11	    - Release November 2009
 	U-Boot v2009.11.1   - Release 1 in version November 2009 stable tree
-	U-Boot v2010.09-rc1 - Release candiate 1 for September 2010 release
+	U-Boot v2010.09-rc1 - Release candidate 1 for September 2010 release
 
 
 Directory Hierarchy:
@@ -376,15 +376,6 @@ The following options need to be configured:
 		Defines the string to utilize when trying to match PCIe device
 		tree nodes for the given platform.
 
-		CONFIG_SYS_PPC_E500_DEBUG_TLB
-
-		Enables a temporary TLB entry to be used during boot to work
-		around limitations in e500v1 and e500v2 external debugger
-		support. This reduces the portions of the boot code where
-		breakpoints and single stepping do not work.  The value of this
-		symbol should be set to the TLB1 entry to be used for this
-		purpose.
-
 		CONFIG_SYS_FSL_ERRATUM_A004510
 
 		Enables a workaround for erratum A004510.  If set,
@@ -513,6 +504,12 @@ The following options need to be configured:
 		CONFIG_SYS_FSL_IFC_LE
 		Defines the IFC controller register space as Little Endian
 
+		CONFIG_SYS_FSL_IFC_CLK_DIV
+		Defines divider of platform clock(clock input to IFC controller).
+
+		CONFIG_SYS_FSL_LBC_CLK_DIV
+		Defines divider of platform clock(clock input to eLBC controller).
+
 		CONFIG_SYS_FSL_PBL_PBI
 		It enables addition of RCW (Power on reset configuration) in built image.
 		Please refer doc/README.pblimage for more details
@@ -1466,9 +1463,6 @@ The following options need to be configured:
 			CONFIG_SH_MMCIF_CLK
 			Define the clock frequency for MMCIF
 
-		CONFIG_GENERIC_MMC
-		Enable the generic MMC driver
-
 		CONFIG_SUPPORT_EMMC_BOOT
 		Enable some additional features of the eMMC boot partitions.
 
@@ -1589,7 +1583,7 @@ The following options need to be configured:
 		This will also enable the command "fatwrite" enabling the
 		user to write files to FAT.
 
-CBFS (Coreboot Filesystem) support
+- CBFS (Coreboot Filesystem) support:
 		CONFIG_CMD_CBFS
 
 		Define this to enable support for reading from a Coreboot
@@ -2042,7 +2036,7 @@ CBFS (Coreboot Filesystem) support
 
 		A byte containing the id of the VLAN.
 
-- Status LED:	CONFIG_STATUS_LED
+- Status LED:	CONFIG_LED_STATUS
 
 		Several configurations allow to display the current
 		status using a LED. For instance, the LED will blink
@@ -2050,15 +2044,15 @@ CBFS (Coreboot Filesystem) support
 		soon as a reply to a BOOTP request was received, and
 		start blinking slow once the Linux kernel is running
 		(supported by a status LED driver in the Linux
-		kernel). Defining CONFIG_STATUS_LED enables this
+		kernel). Defining CONFIG_LED_STATUS enables this
 		feature in U-Boot.
 
 		Additional options:
 
-		CONFIG_GPIO_LED
+		CONFIG_LED_STATUS_GPIO
 		The status LED can be connected to a GPIO pin.
 		In such cases, the gpio_led driver can be used as a
-		status LED backend implementation. Define CONFIG_GPIO_LED
+		status LED backend implementation. Define CONFIG_LED_STATUS_GPIO
 		to include the gpio_led driver in the U-Boot binary.
 
 		CONFIG_GPIO_LED_INVERTED_TABLE
@@ -3338,11 +3332,6 @@ FIT uImage format:
 		CONFIG_SPL_INIT_MINIMAL
 		Arch init code should be built for a very small image
 
-		CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR,
-		CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS,
-		Address and partition on the MMC to load U-Boot from
-		when the MMC is being used in raw mode.
-
 		CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION
 		Partition on the MMC to load U-Boot from when the MMC is being
 		used in raw mode
@@ -4115,7 +4104,7 @@ but it can not erase, write this NOR flash by SRIO or PCIE interface.
 
          Define this to a string that is the name of the block device.
 
-       - FAT_ENV_DEV_AND_PART:
+       - FAT_ENV_DEVICE_AND_PART:
 
          Define this to a string to specify the partition of the device. It can
          be as following:
@@ -4598,12 +4587,6 @@ Low Level (hardware related) configuration options:
 		addressable memory. This option causes some memory accesses
 		to be mapped through map_sysmem() / unmap_sysmem().
 
-- CONFIG_USE_ARCH_MEMCPY
-  CONFIG_USE_ARCH_MEMSET
-		If these options are used a optimized version of memcpy/memset will
-		be used if available. These functions may be faster under some
-		conditions but may increase the binary size.
-
 - CONFIG_X86_RESET_VECTOR
 		If defined, the x86 reset vector code is included. This is not
 		needed when U-Boot is running from Coreboot.