X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=board%2Fesd%2Fcommon%2Fauto_update.c;h=4dfea71966b9ed62fdd9a670e00509f378bc14ba;hb=688d8f33f27ea596efb6632388ee60360996eed0;hp=633f64178e6ecff1d32b7118120df64cef9f6477;hpb=f82642e33899766892499b163e60560fbbf87773;p=u-boot

diff --git a/board/esd/common/auto_update.c b/board/esd/common/auto_update.c
index 633f64178e..4dfea71966 100644
--- a/board/esd/common/auto_update.c
+++ b/board/esd/common/auto_update.c
@@ -1,6 +1,6 @@
 /*
  * (C) Copyright 2003-2004
- * Gary Jennejohn, DENX Software Engineering, gj@denx.de.
+ * Gary Jennejohn, DENX Software Engineering, garyj@denx.de.
  * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,9 +27,6 @@
 #include <command.h>
 #include <image.h>
 #include <asm/byteorder.h>
-#if defined(CONFIG_NAND_LEGACY)
-#include <linux/mtd/nand_legacy.h>
-#endif
 #include <fat.h>
 #include <part.h>
 
@@ -58,20 +55,6 @@ extern int flash_sect_erase(ulong, ulong);
 extern int flash_sect_protect (int, ulong, ulong);
 extern int flash_write (char *, ulong, ulong);
 
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
-/* references to names in cmd_nand.c */
-#define NANDRW_READ	0x01
-#define NANDRW_WRITE	0x00
-#define NANDRW_JFFS2	0x02
-#define NANDRW_JFFS2_SKIP	0x04
-extern struct nand_chip nand_dev_desc[];
-extern int nand_legacy_rw(struct nand_chip* nand, int cmd,
-			  size_t start, size_t len,
-			  size_t * retlen, u_char * buf);
-extern int nand_legacy_erase(struct nand_chip* nand, size_t ofs,
-			     size_t len, int clean);
-#endif
-
 extern block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
 
 int au_check_cksum_valid(int i, long nbytes)
@@ -158,9 +141,6 @@ int au_do_update(int i, long sz)
 	int off, rc;
 	uint nbytes;
 	int k;
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
-	int total;
-#endif
 
 	hdr = (image_header_t *)LOAD_ADDR;
 #if defined(CONFIG_FIT)
@@ -240,15 +220,6 @@ int au_do_update(int i, long sz)
 				au_image[i].name);
 			debug ("flash_sect_erase(%lx, %lx);\n", start, end);
 			flash_sect_erase (start, end);
-		} else {
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
-			printf ("Updating NAND FLASH with image %s\n",
-				au_image[i].name);
-			debug ("nand_legacy_erase(%lx, %lx);\n", start, end);
-			rc = nand_legacy_erase (nand_dev_desc, start,
-						end - start + 1, 0);
-			debug ("nand_legacy_erase returned %x\n", rc);
-#endif
 		}
 
 		udelay(10000);
@@ -273,18 +244,7 @@ int au_do_update(int i, long sz)
 			rc = flash_write ((char *)addr, start,
 					  (nbytes + 1) & ~1);
 		} else {
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
-			debug ("nand_legacy_rw(%p, %lx, %x)\n",
-			       addr, start, nbytes);
-			rc = nand_legacy_rw (nand_dev_desc,
-					     NANDRW_WRITE | NANDRW_JFFS2,
-					     start, nbytes, (size_t *)&total,
-					     (uchar *)addr);
-			debug ("nand_legacy_rw: ret=%x total=%d nbytes=%d\n",
-			       rc, total, nbytes);
-#else
 			rc = -1;
-#endif
 		}
 		if (rc != 0) {
 			printf ("Flashing failed due to error %d\n", rc);
@@ -297,16 +257,6 @@ int au_do_update(int i, long sz)
 		if (au_image[i].type != AU_NAND) {
 			rc = crc32 (0, (uchar *)(start + off),
 				    image_get_data_size (hdr));
-		} else {
-#if defined(CONFIG_CMD_NAND) && defined(CONFIG_NAND_LEGACY)
-			rc = nand_legacy_rw (nand_dev_desc,
-					     NANDRW_READ | NANDRW_JFFS2 |
-					     NANDRW_JFFS2_SKIP,
-					     start, nbytes, (size_t *)&total,
-					     (uchar *)addr);
-			rc = crc32 (0, (uchar *)(addr + off),
-				    image_get_data_size (hdr));
-#endif
 		}
 		if (rc != image_get_dcrc (hdr)) {
 			printf ("Image %s Bad Data Checksum After COPY\n",
@@ -542,7 +492,7 @@ int do_auto_update(void)
 	return 0;
 }
 
-int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	do_auto_update();
 
@@ -550,7 +500,7 @@ int auto_update(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 }
 U_BOOT_CMD(
 	autoupd,	1,	1,	auto_update,
-	"autoupd - Automatically update images\n",
-	NULL
+	"Automatically update images",
+	""
 );
 #endif /* CONFIG_AUTO_UPDATE */