X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=cpu%2Fblackfin%2Finitcode.c;h=aba00e0fb9aa87b7239ab90f3cbd573bf553544f;hb=8ef929afa43c77c9573caa57c6e17a97a33775c0;hp=ae0016de18f9c67f6799ee2f73321ccb3fe50296;hpb=64ace0d1e5302ada84edb2ea473e5b89198c3353;p=u-boot diff --git a/cpu/blackfin/initcode.c b/cpu/blackfin/initcode.c index ae0016de18..aba00e0fb9 100644 --- a/cpu/blackfin/initcode.c +++ b/cpu/blackfin/initcode.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -203,9 +204,62 @@ static inline void serial_putc(char c) # define CONFIG_VR_CTL_VAL (CONFIG_VR_CTL_CLKBUF | CONFIG_VR_CTL_VLEV | CONFIG_VR_CTL_FREQ) #endif +/* some parts do not have an on-chip voltage regulator */ +#if defined(__ADSPBF51x__) +# define CONFIG_HAS_VR 0 +# undef CONFIG_VR_CTL_VAL +# define CONFIG_VR_CTL_VAL 0 +#else +# define CONFIG_HAS_VR 1 +#endif + +#ifndef EBIU_RSTCTL +/* Blackfin with SDRAM */ +#ifndef CONFIG_EBIU_SDBCTL_VAL +# if CONFIG_MEM_SIZE == 16 +# define CONFIG_EBSZ_VAL EBSZ_16 +# elif CONFIG_MEM_SIZE == 32 +# define CONFIG_EBSZ_VAL EBSZ_32 +# elif CONFIG_MEM_SIZE == 64 +# define CONFIG_EBSZ_VAL EBSZ_64 +# elif CONFIG_MEM_SIZE == 128 +# define CONFIG_EBSZ_VAL EBSZ_128 +# elif CONFIG_MEM_SIZE == 256 +# define CONFIG_EBSZ_VAL EBSZ_256 +# elif CONFIG_MEM_SIZE == 512 +# define CONFIG_EBSZ_VAL EBSZ_512 +# else +# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_SIZE +# endif +# if CONFIG_MEM_ADD_WDTH == 8 +# define CONFIG_EBCAW_VAL EBCAW_8 +# elif CONFIG_MEM_ADD_WDTH == 9 +# define CONFIG_EBCAW_VAL EBCAW_9 +# elif CONFIG_MEM_ADD_WDTH == 10 +# define CONFIG_EBCAW_VAL EBCAW_10 +# elif CONFIG_MEM_ADD_WDTH == 11 +# define CONFIG_EBCAW_VAL EBCAW_11 +# else +# error You need to define CONFIG_EBIU_SDBCTL_VAL or CONFIG_MEM_ADD_WDTH +# endif +# define CONFIG_EBIU_SDBCTL_VAL (CONFIG_EBCAW_VAL | CONFIG_EBSZ_VAL | EBE) +#endif +#endif + +/* Conflicting Column Address Widths Causes SDRAM Errors: + * EB2CAW and EB3CAW must be the same + */ +#if ANOMALY_05000362 +# if ((CONFIG_EBIU_SDBCTL_VAL & 0x30000000) >> 8) != (CONFIG_EBIU_SDBCTL_VAL & 0x00300000) +# error "Anomaly 05000362: EB2CAW and EB3CAW must be the same" +# endif +#endif + BOOTROM_CALLED_FUNC_ATTR void initcode(ADI_BOOT_DATA *bootstruct) { + ADI_BOOT_DATA bootstruct_scratch; + /* Save the clock pieces that are used in baud rate calculation */ unsigned int sdivB, divB, vcoB; serial_init(); @@ -215,6 +269,15 @@ void initcode(ADI_BOOT_DATA *bootstruct) divB = serial_early_get_div(); } + serial_putc('A'); + + /* If the bootstruct is NULL, then it's because we're loading + * dynamically and not via LDR (bootrom). So set the struct to + * some scratch space. + */ + if (!bootstruct) + bootstruct = &bootstruct_scratch; + #ifdef CONFIG_HW_WATCHDOG # ifndef CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE # define CONFIG_HW_WATCHDOG_TIMEOUT_INITCODE 20000 @@ -231,7 +294,23 @@ void initcode(ADI_BOOT_DATA *bootstruct) } #endif - serial_putc('S'); + serial_putc('B'); + + /* If external memory is enabled, put it into self refresh first. */ + bool put_into_srfs = false; +#ifdef EBIU_RSTCTL + if (bfin_read_EBIU_RSTCTL() & DDR_SRESET) { + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | SRREQ); + put_into_srfs = true; + } +#else + if (bfin_read_EBIU_SDBCTL() & EBE) { + bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() | SRFS); + put_into_srfs = true; + } +#endif + + serial_putc('C'); /* Blackfin bootroms use the SPI slow read opcode instead of the SPI * fast read, so we need to slow down the SPI clock a lot more during @@ -244,53 +323,87 @@ void initcode(ADI_BOOT_DATA *bootstruct) bfin_write_SPI_BAUD(CONFIG_SPI_BAUD_INITBLOCK); } - serial_putc('B'); + serial_putc('D'); - /* Disable all peripheral wakeups except for the PLL event. */ -#ifdef SIC_IWR0 - bfin_write_SIC_IWR0(1); - bfin_write_SIC_IWR1(0); -# ifdef SIC_IWR2 - bfin_write_SIC_IWR2(0); -# endif -#elif defined(SICA_IWR0) - bfin_write_SICA_IWR0(1); - bfin_write_SICA_IWR1(0); + /* If we're entering self refresh, make sure it has happened. */ + if (put_into_srfs) +#ifdef EBIU_RSTCTL + while (!(bfin_read_EBIU_RSTCTL() & SRACK)) #else - bfin_write_SIC_IWR(1); + while (!(bfin_read_EBIU_SDSTAT() & SDSRA)) #endif + continue; + + serial_putc('E'); /* With newer bootroms, we use the helper function to set up * the memory controller. Older bootroms lacks such helpers * so we do it ourselves. */ - if (BOOTROM_CAPS_SYSCONTROL) { - serial_putc('S'); + uint16_t vr_ctl = bfin_read_VR_CTL(); + if (!ANOMALY_05000386) { + serial_putc('F'); + /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */ ADI_SYSCTRL_VALUES memory_settings; - memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL; + uint32_t actions = SYSCTRL_WRITE | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT; + if (CONFIG_HAS_VR) { + actions |= SYSCTRL_VRCTL; + if (CONFIG_VR_CTL_VAL & FREQ_MASK) + actions |= SYSCTRL_INTVOLTAGE; + else + actions |= SYSCTRL_EXTVOLTAGE; + memory_settings.uwVrCtl = CONFIG_VR_CTL_VAL; + } else + actions |= SYSCTRL_EXTVOLTAGE; memory_settings.uwPllCtl = CONFIG_PLL_CTL_VAL; memory_settings.uwPllDiv = CONFIG_PLL_DIV_VAL; memory_settings.uwPllLockCnt = CONFIG_PLL_LOCKCNT_VAL; - syscontrol(SYSCTRL_WRITE | SYSCTRL_VRCTL | SYSCTRL_PLLCTL | SYSCTRL_PLLDIV | SYSCTRL_LOCKCNT | - (CONFIG_VR_CTL_VAL & FREQ_MASK ? SYSCTRL_INTVOLTAGE : SYSCTRL_EXTVOLTAGE), &memory_settings, NULL); +#if ANOMALY_05000432 + bfin_write_SIC_IWR1(0); +#endif + bfrom_SysControl(actions, &memory_settings, NULL); +#if ANOMALY_05000432 + bfin_write_SIC_IWR1(-1); +#endif +#if ANOMALY_05000171 + bfin_write_SICA_IWR0(-1); + bfin_write_SICA_IWR1(-1); +#endif } else { - serial_putc('L'); + serial_putc('G'); + + /* Disable all peripheral wakeups except for the PLL event. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(1); + bfin_write_SIC_IWR1(0); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(0); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(1); + bfin_write_SICA_IWR1(0); +#else + bfin_write_SIC_IWR(1); +#endif + + serial_putc('H'); + /* Always programming PLL_LOCKCNT avoids Anomaly 05000430 */ bfin_write_PLL_LOCKCNT(CONFIG_PLL_LOCKCNT_VAL); - serial_putc('A'); + serial_putc('I'); /* Only reprogram when needed to avoid triggering unnecessary * PLL relock sequences. */ - if (bfin_read_VR_CTL() != CONFIG_VR_CTL_VAL) { + if (vr_ctl != CONFIG_VR_CTL_VAL) { serial_putc('!'); bfin_write_VR_CTL(CONFIG_VR_CTL_VAL); asm("idle;"); } - serial_putc('C'); + serial_putc('J'); bfin_write_PLL_DIV(CONFIG_PLL_DIV_VAL); @@ -299,13 +412,31 @@ void initcode(ADI_BOOT_DATA *bootstruct) /* Only reprogram when needed to avoid triggering unnecessary * PLL relock sequences. */ - if (bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { + if (ANOMALY_05000242 || bfin_read_PLL_CTL() != CONFIG_PLL_CTL_VAL) { serial_putc('!'); bfin_write_PLL_CTL(CONFIG_PLL_CTL_VAL); asm("idle;"); } + + serial_putc('L'); + + /* Restore all peripheral wakeups. */ +#ifdef SIC_IWR0 + bfin_write_SIC_IWR0(-1); + bfin_write_SIC_IWR1(-1); +# ifdef SIC_IWR2 + bfin_write_SIC_IWR2(-1); +# endif +#elif defined(SICA_IWR0) + bfin_write_SICA_IWR0(-1); + bfin_write_SICA_IWR1(-1); +#else + bfin_write_SIC_IWR(-1); +#endif } + serial_putc('M'); + /* Since we've changed the SCLK above, we may need to update * the UART divisors (UART baud rates are based on SCLK). * Do the division by hand as there are no native instructions @@ -323,23 +454,32 @@ void initcode(ADI_BOOT_DATA *bootstruct) serial_early_put_div(quotient - ANOMALY_05000230); } - serial_putc('F'); + serial_putc('N'); - /* Program the async banks controller. */ - bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); - bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); - bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + /* Program the external memory controller before we come out of + * self-refresh. This only works with our SDRAM controller. + */ +#ifndef EBIU_RSTCTL + bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); + bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); + bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +#endif -#ifdef EBIU_MODE - /* Not all parts have these additional MMRs. */ - bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); - bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); - bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); + serial_putc('O'); + + /* Now that we've reprogrammed, take things out of self refresh. */ + if (put_into_srfs) +#ifdef EBIU_RSTCTL + bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() & ~(SRREQ)); +#else + bfin_write_EBIU_SDGCTL(bfin_read_EBIU_SDGCTL() & ~(SRFS)); #endif - serial_putc('I'); + serial_putc('P'); - /* Program the external memory controller. */ + /* Our DDR controller sucks and cannot be programmed while in + * self-refresh. So we have to pull it out before programming. + */ #ifdef EBIU_RSTCTL bfin_write_EBIU_RSTCTL(bfin_read_EBIU_RSTCTL() | 0x1 /*DDRSRESET*/ | CONFIG_EBIU_RSTCTL_VAL); bfin_write_EBIU_DDRCTL0(CONFIG_EBIU_DDRCTL0_VAL); @@ -349,28 +489,64 @@ void initcode(ADI_BOOT_DATA *bootstruct) /* default is disable, so don't need to force this */ bfin_write_EBIU_DDRCTL3(CONFIG_EBIU_DDRCTL3_VAL); # endif -#else - bfin_write_EBIU_SDRRC(CONFIG_EBIU_SDRRC_VAL); - bfin_write_EBIU_SDBCTL(CONFIG_EBIU_SDBCTL_VAL); - bfin_write_EBIU_SDGCTL(CONFIG_EBIU_SDGCTL_VAL); +# ifdef CONFIG_EBIU_DDRQUE_VAL + bfin_write_EBIU_DDRQUE(bfin_read_EBIU_DDRQUE() | CONFIG_EBIU_DDRQUE_VAL); +# endif #endif - serial_putc('N'); + serial_putc('Q'); - /* Restore all peripheral wakeups. */ -#ifdef SIC_IWR0 - bfin_write_SIC_IWR0(-1); - bfin_write_SIC_IWR1(-1); -# ifdef SIC_IWR2 - bfin_write_SIC_IWR2(-1); -# endif -#elif defined(SICA_IWR0) - bfin_write_SICA_IWR0(-1); - bfin_write_SICA_IWR1(-1); -#else - bfin_write_SIC_IWR(-1); + /* Are we coming out of hibernate (suspend to memory) ? + * The memory layout is: + * 0x0: hibernate magic for anomaly 307 (0xDEADBEEF) + * 0x4: return address + * 0x8: stack pointer + * + * SCKELOW is unreliable on older parts (anomaly 307) + */ + if (ANOMALY_05000307 || vr_ctl & 0x8000) { + uint32_t *hibernate_magic = 0; + __builtin_bfin_ssync(); /* make sure memory controller is done */ + if (hibernate_magic[0] == 0xDEADBEEF) { + serial_putc('R'); + bfin_write_EVT15(hibernate_magic[1]); + bfin_write_IMASK(EVT_IVG15); + __asm__ __volatile__ ( + /* load reti early to avoid anomaly 281 */ + "reti = %0;" + /* clear hibernate magic */ + "[%0] = %1;" + /* load stack pointer */ + "SP = [%0 + 8];" + /* lower ourselves from reset ivg to ivg15 */ + "raise 15;" + "rti;" + : + : "p"(hibernate_magic), "d"(0x2000 /* jump.s 0 */) + ); + } + } + + serial_putc('S'); + + /* Program the async banks controller. */ + bfin_write_EBIU_AMBCTL0(CONFIG_EBIU_AMBCTL0_VAL); + bfin_write_EBIU_AMBCTL1(CONFIG_EBIU_AMBCTL1_VAL); + bfin_write_EBIU_AMGCTL(CONFIG_EBIU_AMGCTL_VAL); + +#ifdef EBIU_MODE + /* Not all parts have these additional MMRs. */ + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTL_VAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODE_VAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTL_VAL); #endif + serial_putc('T'); + + /* tell the bootrom where our entry point is */ + if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_BYPASS) + bfin_write_EVT1(CONFIG_SYS_MONITOR_BASE); + serial_putc('>'); serial_putc('\n');