X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fmmc%2FKconfig;h=a1b21fd1bd0726c91c679a3240a49fc423942567;hb=368e86d9836aa044f2afb233e0445c8e4040b179;hp=6de927b8c6cb98ee71c60b8b6e22ec8ae3a7ffa7;hpb=1d20170467b079642be96996dcd71db64c3c365c;p=u-boot

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 6de927b8c6..a1b21fd1bd 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -10,6 +10,18 @@ config MMC
 	  If you want MMC/SD/SDIO support, you should say Y here and
 	  also to your specific host controller driver.
 
+config MMC_WRITE
+	bool "support for MMC/SD write operations"
+	depends on MMC
+	default y
+	help
+	  Enable write access to MMC and SD Cards
+
+config MMC_BROKEN_CD
+	bool "Poll for broken card detection case"
+	help
+	  If card  detection feature is broken, just poll to detect.
+
 config DM_MMC
 	bool "Enable MMC controllers using Driver Model"
 	depends on DM
@@ -33,6 +45,84 @@ config SPL_DM_MMC
 
 if MMC
 
+config ARM_PL180_MMCI
+	bool "ARM AMBA Multimedia Card Interface and compatible support"
+	depends on DM_MMC && OF_CONTROL
+	help
+	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
+	  Interface (PL180, PL181 and compatible) support.
+	  If you have an ARM(R) platform with a Multimedia Card slot,
+	  say Y or M here.
+
+config MMC_QUIRKS
+	bool "Enable quirks"
+	default y
+	help
+	  Some cards and hosts may sometimes behave unexpectedly (quirks).
+	  This option enable workarounds to handle those quirks. Some of them
+	  are enabled by default, other may require additionnal flags or are
+	  enabled by the host driver.
+
+config MMC_HW_PARTITIONING
+	bool "Support for HW partitioning command(eMMC)"
+	default y
+	help
+	  This adds a command and an API to do hardware partitioning on eMMC
+	  devices.
+
+config MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration"
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config SPL_MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration in SPL"
+	default n
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config MMC_UHS_SUPPORT
+	bool "enable UHS support"
+	depends on MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config SPL_MMC_UHS_SUPPORT
+	bool "enable UHS support in SPL"
+	depends on SPL_MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config MMC_HS200_SUPPORT
+	bool "enable HS200 support"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+
+config SPL_MMC_HS200_SUPPORT
+	bool "enable HS200 support in SPL"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+config MMC_VERBOSE
+	bool "Output more information about the MMC"
+	default y
+	help
+	  Enable the output of more information about the card such as the
+	  operating mode.
+
 config SPL_MMC_TINY
 	bool "Tiny MMC framework in SPL"
 	help
@@ -136,6 +226,7 @@ config MMC_PCI
 config MMC_OMAP_HS
 	bool "TI OMAP High Speed Multimedia Card Interface support"
 	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
+	select DM_REGULATOR_PBIAS if DM_MMC && DM_REGULATOR
 	help
 	  This selects the TI OMAP High Speed Multimedia card Interface.
 	  If you have an omap2plus board with a Multimedia Card slot,
@@ -162,12 +253,27 @@ config SH_SDHI
 	  Support for the on-chip SDHI host controller on SuperH/Renesas ARM SoCs platform
 
 config MMC_UNIPHIER
-	bool "UniPhier SD/MMC Host Controller support"
-	depends on ARCH_UNIPHIER
+	bool "UniPhier/RCar SD/MMC Host Controller support"
+	depends on ARCH_UNIPHIER || ARCH_RMOBILE
 	depends on BLK && DM_MMC
 	depends on OF_CONTROL
 	help
-	  This selects support for the SD/MMC Host Controller on UniPhier SoCs.
+	  This selects support for the Matsushita SD/MMC Host Controller on
+	  SocioNext UniPhier and Renesas RCar SoCs.
+
+config MMC_BCM2835
+	bool "BCM2835 family custom SD/MMC Host Controller support"
+	depends on ARCH_BCM283X
+	depends on BLK && DM_MMC
+	depends on OF_CONTROL
+	default y
+	help
+	  This selects support for the custom SD host controller in the BCM2835
+	  family of devices.
+
+	  If you have a BCM2835 platform with SD or MMC devices, say Y here.
+
+	  If unsure, say N.
 
 config MMC_SANDBOX
 	bool "Sandbox MMC support"
@@ -382,6 +488,26 @@ config GENERIC_ATMEL_MCI
 	  the SD Memory Card Specification V2.0, the SDIO V2.0 specification
 	  and CE-ATA V1.1.
 
+config STM32_SDMMC2
+	bool "STMicroelectronics STM32H7 SD/MMC Host Controller support"
+	depends on DM_MMC && BLK && OF_CONTROL
+	help
+	  This selects support for the SD/MMC controller on STM32H7 SoCs.
+	  If you have a board based on such a SoC and with a SD/MMC slot,
+	  say Y or M here.
+
+config MMC_NDS32
+	bool "Andestech SD/MMC controller support"
+	depends on DM_MMC && OF_CONTROL && BLK && FTSDC010
+	help
+	  This enables support for the Andestech SD/MMM controller, which is
+	  based on Faraday IP.
+
+config FTSDC010
+	bool "Ftsdc010 SD/MMC controller Support"
+	help
+	  This SD/MMC controller is present in Andestech SoCs which is based on Faraday IP.
+
 endif
 
 config TEGRA124_MMC_DISABLE_EXT_LOOPBACK