X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fmmc%2FKconfig;h=a1b21fd1bd0726c91c679a3240a49fc423942567;hb=368e86d9836aa044f2afb233e0445c8e4040b179;hp=8fbeaa740d6e16e399fc02233d99ba9e7e319396;hpb=da63df97ea100053ea34cc022a1660f760ec32b4;p=u-boot

diff --git a/drivers/mmc/Kconfig b/drivers/mmc/Kconfig
index 8fbeaa740d..a1b21fd1bd 100644
--- a/drivers/mmc/Kconfig
+++ b/drivers/mmc/Kconfig
@@ -10,6 +10,18 @@ config MMC
 	  If you want MMC/SD/SDIO support, you should say Y here and
 	  also to your specific host controller driver.
 
+config MMC_WRITE
+	bool "support for MMC/SD write operations"
+	depends on MMC
+	default y
+	help
+	  Enable write access to MMC and SD Cards
+
+config MMC_BROKEN_CD
+	bool "Poll for broken card detection case"
+	help
+	  If card  detection feature is broken, just poll to detect.
+
 config DM_MMC
 	bool "Enable MMC controllers using Driver Model"
 	depends on DM
@@ -42,6 +54,75 @@ config ARM_PL180_MMCI
 	  If you have an ARM(R) platform with a Multimedia Card slot,
 	  say Y or M here.
 
+config MMC_QUIRKS
+	bool "Enable quirks"
+	default y
+	help
+	  Some cards and hosts may sometimes behave unexpectedly (quirks).
+	  This option enable workarounds to handle those quirks. Some of them
+	  are enabled by default, other may require additionnal flags or are
+	  enabled by the host driver.
+
+config MMC_HW_PARTITIONING
+	bool "Support for HW partitioning command(eMMC)"
+	default y
+	help
+	  This adds a command and an API to do hardware partitioning on eMMC
+	  devices.
+
+config MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration"
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config SPL_MMC_IO_VOLTAGE
+	bool "Support IO voltage configuration in SPL"
+	default n
+	help
+	  IO voltage configuration allows selecting the voltage level of the IO
+	  lines (not the level of main supply). This is required for UHS
+	  support. For eMMC this not mandatory, but not enabling this option may
+	  prevent the driver of using the faster modes.
+
+config MMC_UHS_SUPPORT
+	bool "enable UHS support"
+	depends on MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config SPL_MMC_UHS_SUPPORT
+	bool "enable UHS support in SPL"
+	depends on SPL_MMC_IO_VOLTAGE
+	help
+	  The Ultra High Speed (UHS) bus is available on some SDHC and SDXC
+	  cards. The IO voltage must be switchable from 3.3v to 1.8v. The bus
+	  frequency can go up to 208MHz (SDR104)
+
+config MMC_HS200_SUPPORT
+	bool "enable HS200 support"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+
+config SPL_MMC_HS200_SUPPORT
+	bool "enable HS200 support in SPL"
+	help
+	  The HS200 mode is support by some eMMC. The bus frequency is up to
+	  200MHz. This mode requires tuning the IO.
+
+config MMC_VERBOSE
+	bool "Output more information about the MMC"
+	default y
+	help
+	  Enable the output of more information about the card such as the
+	  operating mode.
+
 config SPL_MMC_TINY
 	bool "Tiny MMC framework in SPL"
 	help
@@ -180,6 +261,20 @@ config MMC_UNIPHIER
 	  This selects support for the Matsushita SD/MMC Host Controller on
 	  SocioNext UniPhier and Renesas RCar SoCs.
 
+config MMC_BCM2835
+	bool "BCM2835 family custom SD/MMC Host Controller support"
+	depends on ARCH_BCM283X
+	depends on BLK && DM_MMC
+	depends on OF_CONTROL
+	default y
+	help
+	  This selects support for the custom SD host controller in the BCM2835
+	  family of devices.
+
+	  If you have a BCM2835 platform with SD or MMC devices, say Y here.
+
+	  If unsure, say N.
+
 config MMC_SANDBOX
 	bool "Sandbox MMC support"
 	depends on SANDBOX