X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fusb%2Fgadget%2FKconfig;h=261ed128acd882c996c11114f9d51eb963e435b5;hb=87fcdca6be8641d8aa7c4e31ccb6cb7d5177359e;hp=f4698f469ea4413fcf8c5bc41ebe7297d5ca1a0c;hpb=f9d0fd8a566f78f27a510258c34b3526f9822e92;p=u-boot

diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index f4698f469e..261ed128ac 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -33,3 +33,89 @@ menuconfig USB_GADGET
 	   a USB peripheral device.  Configure one hardware driver for your
 	   peripheral/device side bus controller, and a "gadget driver" for
 	   your peripheral protocol.
+
+if USB_GADGET
+
+config USB_GADGET_ATMEL_USBA
+	bool "Atmel USBA"
+	select USB_GADGET_DUALSPEED
+	help
+	  USBA is the integrated high-speed USB Device controller on
+	  the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel.
+
+config USB_GADGET_BCM_UDC_OTG_PHY
+	bool "Broadcom UDC OTG PHY"
+	help
+	  Enable the Broadcom UDC OTG physical device interface.
+
+config USB_GADGET_DWC2_OTG
+	bool "DesignWare USB2.0 HS OTG controller (gadget mode)"
+	select USB_GADGET_DUALSPEED
+	help
+	  The Designware USB2.0 high-speed gadget controller
+	  integrated into many SoCs. Select this option if you want the
+	  driver to operate in Peripheral mode. This option requires
+	  USB_GADGET to be enabled.
+
+if USB_GADGET_DWC2_OTG
+
+config USB_GADGET_DWC2_OTG_PHY_BUS_WIDTH_8
+	bool "DesignWare USB2.0 HS OTG controller 8-bit PHY bus width"
+	help
+	  Set the Designware USB2.0 high-speed OTG controller
+	  PHY interface width to 8 bits, rather than the default (16 bits).
+
+endif # USB_GADGET_DWC2_OTG
+
+config CI_UDC
+	bool "ChipIdea device controller"
+	select USB_GADGET_DUALSPEED
+	help
+	  Say Y here to enable device controller functionality of the
+	  ChipIdea driver.
+
+config USB_GADGET_VBUS_DRAW
+	int "Maximum VBUS Power usage (2-500 mA)"
+	range 2 500
+	default 2
+	help
+	   Some devices need to draw power from USB when they are
+	   configured, perhaps to operate circuitry or to recharge
+	   batteries.  This is in addition to any local power supply,
+	   such as an AC adapter or batteries.
+
+	   Enter the maximum power your device draws through USB, in
+	   milliAmperes.  The permitted range of values is 2 - 500 mA;
+	   0 mA would be legal, but can make some hosts misbehave.
+
+	   This value will be used except for system-specific gadget
+	   drivers that have more specific information.
+
+# Selected by UDC drivers that support high-speed operation.
+config USB_GADGET_DUALSPEED
+	bool
+
+config USB_GADGET_DOWNLOAD
+	bool "Enable USB download gadget"
+	help
+	  Composite USB download gadget support (g_dnl) for download functions.
+	  This code works on top of composite gadget.
+
+if USB_GADGET_DOWNLOAD
+
+config G_DNL_MANUFACTURER
+	string "Vendor name of USB device"
+
+config G_DNL_VENDOR_NUM
+	hex "Vendor ID of USB device"
+
+config G_DNL_PRODUCT_NUM
+	hex "Product ID of USB device"
+
+config USBNET_DEVADDR
+	string "USB Gadget Ethernet device mac address"
+	default "de:ad:be:ef:00:01"
+
+endif # USB_GADGET_DOWNLOAD
+
+endif # USB_GADGET