X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FMPC8349ITX.h;h=de233ffe627a3ed8243f7133ae98e72367c478c2;hb=0ea91423f47461bf7eaed2d4aff198076dd07fd5;hp=5e1ddaedd63126105e89ef4623e8a1e3cbf494fb;hpb=741a1ea97335c88747a2de6677b92458d6ada00b;p=u-boot diff --git a/include/configs/MPC8349ITX.h b/include/configs/MPC8349ITX.h index 5e1ddaedd6..de233ffe62 100644 --- a/include/configs/MPC8349ITX.h +++ b/include/configs/MPC8349ITX.h @@ -1,5 +1,5 @@ /* - * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. + * Copyright (C) Freescale Semiconductor, Inc. 2006. * * See file CREDITS for list of people who contributed to this * project. @@ -56,16 +56,21 @@ #ifndef __CONFIG_H #define __CONFIG_H -#if (TEXT_BASE == 0xFE000000) +#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) #define CONFIG_SYS_LOWBOOT #endif /* * High Level Configuration Options */ -#define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ +#define CONFIG_MPC83xx 1 +#define CONFIG_MPC834x /* MPC834x family (8343, 8347, 8349) */ #define CONFIG_MPC8349 /* MPC8349 specific */ +#ifndef CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_TEXT_BASE 0xFEF00000 +#endif + #define CONFIG_SYS_IMMR 0xE0000000 /* The IMMR is relocated to here */ #define CONFIG_MISC_INIT_F @@ -79,6 +84,7 @@ #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ #define CONFIG_VSC7385_ENET /* VSC7385 ethernet support */ #define CONFIG_SATA_SIL3114 /* SIL3114 SATA controller */ +#define CONFIG_SYS_USB_HOST /* use the EHCI USB controller */ #endif #define CONFIG_PCI @@ -95,10 +101,10 @@ #define CONFIG_FSL_I2C #define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE #define CONFIG_SYS_I2C_OFFSET 0x3000 #define CONFIG_SYS_I2C2_OFFSET 0x3100 #define CONFIG_SYS_SPD_BUS_NUM 1 /* The I2C bus for SPD */ +#define CONFIG_SYS_RTC_BUS_NUM 1 /* The I2C bus for RTC */ #define CONFIG_SYS_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ #define CONFIG_SYS_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ @@ -155,6 +161,25 @@ #endif +#ifdef CONFIG_SYS_USB_HOST +/* + * Support USB + */ +#define CONFIG_CMD_USB +#define CONFIG_USB_STORAGE +#define CONFIG_USB_EHCI +#define CONFIG_USB_EHCI_FSL + +/* Current USB implementation supports the only USB controller, + * so we have to choose between the MPH or the DR ones */ +#if 1 +#define CONFIG_HAS_FSL_MPH_USB +#else +#define CONFIG_HAS_FSL_DR_USB +#endif + +#endif + /* * DDR Setup */ @@ -168,6 +193,9 @@ #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075) +#define CONFIG_VERY_BIG_RAM +#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)256 << 20) + #ifdef CONFIG_HARD_I2C #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ #endif @@ -268,7 +296,7 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * U-Boot memory configuration */ -#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) #define CONFIG_SYS_RAMBOOT @@ -278,14 +306,13 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_INIT_RAM_LOCK #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_END 0x1000 /* End of used area in RAM*/ +#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ -#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* num bytes initial data */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ +#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ #define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ /* @@ -294,7 +321,8 @@ boards, we say we have two, but don't display a message if we find only one. */ * External Local Bus rate is * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV */ -#define CONFIG_SYS_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) +#define CONFIG_SYS_LCRR_DBYP LCRR_DBYP +#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4 #define CONFIG_SYS_LBC_LBCR 0x00000000 #define CONFIG_SYS_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ @@ -304,7 +332,6 @@ boards, we say we have two, but don't display a message if we find only one. */ * Serial Port */ #define CONFIG_CONS_INDEX 1 -#undef CONFIG_SERIAL_SOFTWARE_FIFO #define CONFIG_SYS_NS16550 #define CONFIG_SYS_NS16550_SERIAL #define CONFIG_SYS_NS16550_REG_SIZE 1 @@ -357,16 +384,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */ #endif -#define _IO_BASE 0x00000000 /* points to PCI I/O space */ - #define CONFIG_NET_MULTI #define CONFIG_PCI_PNP /* do pci plug-and-play */ -#ifdef CONFIG_RTL8139 -/* This macro is used by RTL8139 but not defined in PPC architecture */ -#define KSEG1ADDR(x) (x) -#endif - #ifndef CONFIG_PCI_PNP #define PCI_ENET0_IOADDR 0x00000000 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI2_MEM_BASE @@ -377,8 +397,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #endif -#define PCI_66M -#ifdef PCI_66M +#define CONFIG_PCI_66M +#ifdef CONFIG_PCI_66M #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ #else #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ @@ -457,11 +477,14 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_CMD_IRQ #define CONFIG_CMD_NET #define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP #define CONFIG_CMD_SDRAM -#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) +#if defined(CONFIG_COMPACT_FLASH) || defined(CONFIG_SATA_SIL3114) \ + || defined(CONFIG_USB_STORAGE) #define CONFIG_DOS_PARTITION #define CONFIG_CMD_FAT + #define CONFIG_SUPPORT_VFAT #endif #ifdef CONFIG_COMPACT_FLASH @@ -470,6 +493,9 @@ boards, we say we have two, but don't display a message if we find only one. */ #ifdef CONFIG_SATA_SIL3114 #define CONFIG_CMD_SATA +#endif + +#if defined(CONFIG_SATA_SIL3114) || defined(CONFIG_USB_STORAGE) #define CONFIG_CMD_EXT2 #endif @@ -488,12 +514,13 @@ boards, we say we have two, but don't display a message if we find only one. */ * Miscellaneous configurable options */ #define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_CMDLINE_EDITING /* Command-line editing */ +#define CONFIG_AUTO_COMPLETE /* add autocompletion support */ #define CONFIG_SYS_HUSH_PARSER /* Use the HUSH parser */ #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ -#define CONFIG_LOADADDR 500000 /* default location for tftp and bootm */ +#define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ #ifdef CONFIG_MPC8349ITX #define CONFIG_SYS_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ @@ -514,10 +541,10 @@ boards, we say we have two, but don't display a message if we find only one. */ /* * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is + * have to be in the first 256 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ +#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ #define CONFIG_SYS_HRCW_LOW (\ HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ @@ -563,15 +590,17 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ #define CONFIG_SYS_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ #define CONFIG_SYS_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ +#define CONFIG_SYS_SCCR_USBMPHCM 3 /* USB MPH controller's clock */ +#define CONFIG_SYS_SCCR_USBDRCM 0 /* USB DR controller's clock */ /* * System IO Config */ #define CONFIG_SYS_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ -#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) +#define CONFIG_SYS_SICRL (SICRL_LDP_A | SICRL_USB1) /* USB DR as device + USB MPH as host */ -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL CONFIG_SYS_HID0_INIT +#define CONFIG_SYS_HID0_INIT 0x00000000 +#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_INSTRUCTION_CACHE #define CONFIG_SYS_HID2 HID2_HBE #define CONFIG_HIGH_BATS 1 /* High BATs supported */ @@ -610,7 +639,8 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ -#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) +#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE | \ + BATL_GUARDEDSTORAGE) #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) #define CONFIG_SYS_IBAT7L 0 @@ -633,14 +663,6 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U -/* - * Internal Definitions - * - * Boot Flags - */ -#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ -#define BOOTFLAG_WARM 0x02 /* Software reboot */ - #if defined(CONFIG_CMD_KGDB) #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ @@ -652,18 +674,6 @@ boards, we say we have two, but don't display a message if we find only one. */ */ #define CONFIG_ENV_OVERWRITE -#ifdef CONFIG_HAS_ETH0 -#define CONFIG_ETHADDR 00:E0:0C:00:8C:01 -#endif - -#ifdef CONFIG_HAS_ETH1 -#define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 -#endif - -#define CONFIG_IPADDR 192.168.1.253 -#define CONFIG_SERVERIP 192.168.1.1 -#define CONFIG_GATEWAYIP 192.168.1.1 -#define CONFIG_NETMASK 255.255.252.0 #define CONFIG_NETDEV eth0 #ifdef CONFIG_MPC8349ITX @@ -683,7 +693,7 @@ boards, we say we have two, but don't display a message if we find only one. */ #define CONFIG_FDTFILE mpc8349emitxgp.dtb #endif -#define CONFIG_BOOTDELAY 0 +#define CONFIG_BOOTDELAY 6 #define XMK_STR(x) #x #define MK_STR(x) XMK_STR(x) @@ -701,12 +711,12 @@ boards, we say we have two, but don't display a message if we find only one. */ "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ "tftpflash=tftpboot $loadaddr $uboot; " \ - "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ - "erase " MK_STR(TEXT_BASE) " +$filesize; " \ - "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ - "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ - "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ - "fdtaddr=400000\0" \ + "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \ + "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ + "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ + "fdtaddr=780000\0" \ "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" #define CONFIG_NFSBOOTCOMMAND \