X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2FSXNI855T.h;h=a8454d99fc0a8fc450048d71cfdc044584aba679;hb=8d7e2732221bc2d64df14f700c64c23e0a4c3dce;hp=195c036bb9eb726c97788d9d9701642eabf0f673;hpb=e2ffd59b4d93c9149de1caaa087371b0cfc512c9;p=u-boot

diff --git a/include/configs/SXNI855T.h b/include/configs/SXNI855T.h
index 195c036bb9..a8454d99fc 100644
--- a/include/configs/SXNI855T.h
+++ b/include/configs/SXNI855T.h
@@ -142,6 +142,7 @@
 # define CFG_I2C_EEPROM_ADDR_LEN 2	/* two byte address		*/
 
 #define	CONFIG_FEC_ENET		1	/* use FEC ethernet  */
+#define	CONFIG_MII		1
 
 #define CFG_DISCOVER_PHY
 
@@ -154,16 +155,35 @@
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
 
-#define CFG_JFFS_CUSTOM_PART
 #define CFG_JFFS2_SORT_FRAGMENTS
-/* JFFS2 location when using NOR flash */
-#define CFG_JFFS2_BASE	(CFG_FLASH_BASE + 0x80000)
-#define CFG_JFFS2_SIZE	(0x780000)
-/* JFFS2 location (in RAM) when using NAND flash */
-#define	CFG_JFFS2_RAMBASE 0x400000
-#define	CFG_JFFS2_RAMSIZE 0x200000	/* NAND boot partition is 2MiB	*/
+
+/*
+ * JFFS2 partitions
+ *
+ */
+/* No command line, one static partition */
+#undef CONFIG_JFFS2_CMDLINE
+
+/*
+#define CONFIG_JFFS2_DEV		"nor0"
+#define CONFIG_JFFS2_PART_SIZE		0x00780000
+#define CONFIG_JFFS2_PART_OFFSET	0x00080000
+*/
+
+#define CONFIG_JFFS2_DEV		"nand0"
+#define CONFIG_JFFS2_PART_SIZE		0x00200000
+#define CONFIG_JFFS2_PART_OFFSET	0x00000000
+
+/* mtdparts command line support */
+/* Note: fake mtd_id used, no linux mtd map file */
+/*
+#define CONFIG_JFFS2_CMDLINE
+#define MTDIDS_DEFAULT		"nor0=sixnet-0,nand0=sixnet-nand"
+#define MTDPARTS_DEFAULT	"mtdparts=sixnet-0:7680k@512k();sixnet-nand:2m(jffs2-nand)"
+*/
 
 /* NAND flash support */
+#define CFG_NAND_LEGACY
 #define CONFIG_MTD_NAND_ECC_JFFS2
 #define CFG_MAX_NAND_DEVICE	1	/* Max number of NAND devices	*/
 #define SECTORSIZE 512