X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fbf548-ezkit.h;h=c7b44ae427c69e276caa231862b98868856028ed;hb=7853d76b0bdab9b1a4da0bba8da6d12b5b8a303f;hp=f9c97114ad060792ba68d165296d5b1f8bd87233;hpb=b097d552bc9ee0351bb0c3d1219856e845df59f9;p=u-boot

diff --git a/include/configs/bf548-ezkit.h b/include/configs/bf548-ezkit.h
index f9c97114ad..c7b44ae427 100644
--- a/include/configs/bf548-ezkit.h
+++ b/include/configs/bf548-ezkit.h
@@ -69,13 +69,10 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK	1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X	1
 #define CONFIG_SMC911X_BASE	0x24000000
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_HOSTNAME		bf548-ezkit
-/* Uncomment next line to use fixed MAC address */
-/* #define CONFIG_ETHADDR	02:80:ad:20:31:e8 */
 
 
 /*
@@ -95,7 +92,6 @@
 #define CONFIG_BFIN_SPI
 #define CONFIG_ENV_SPI_MAX_HZ	30000000
 #define CONFIG_SF_DEFAULT_SPEED	30000000
-#define CONFIG_SPI_FLASH
 #define CONFIG_SPI_FLASH_STMICRO
 
 
@@ -110,38 +106,33 @@
 #define CONFIG_ENV_IS_EMBEDDED_IN_LDR
 #elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET	0x40000
+#define CONFIG_ENV_OFFSET	0x60000
 #define CONFIG_ENV_SIZE		0x20000
 #else
+/* The BF548-EZKIT uses a top boot flash */
 #define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		0x20002000
-#define CONFIG_ENV_OFFSET	0x2000
-#define CONFIG_ENV_SIZE		0x2000
-#define CONFIG_ENV_SECT_SIZE	(128 * 1024)
-#define CONFIG_ENV_IS_EMBEDDED_IN_LDR
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_OFFSET	(0x1000000 - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#define CONFIG_ENV_SECT_SIZE	0x8000
 #endif
 
-
 /*
  * NAND Settings
  */
-#define CONFIG_BFIN_NFC_CTL_VAL	0x0033
 #if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND)
-# define CONFIG_BFIN_NFC_BOOTROM_ECC
-#endif
+#define CONFIG_BFIN_NFC_CTL_VAL        0x0033
+#define CONFIG_BFIN_NFC_BOOTROM_ECC
 #define CONFIG_DRIVER_NAND_BFIN
-#define CONFIG_SYS_NAND_BASE		0 /* not actually used */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-#define NAND_MAX_CHIPS		1
-
+#define CONFIG_SYS_NAND_BASE           0 /* not actually used */
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#endif
 
 /*
  * I2C Settings
  */
-#define CONFIG_BFIN_TWI_I2C	1
-#define CONFIG_HARD_I2C		1
-#define CONFIG_SYS_I2C_SPEED	50000
-#define CONFIG_SYS_I2C_SLAVE	0
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_I2C_ADI
 
 
 /*
@@ -183,22 +174,30 @@
  * Misc Settings
  */
 #define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_BOARD_SIZE_LIMIT $$(( 512 * 1024 ))
 #define CONFIG_RTC_BFIN
 #define CONFIG_UART_CONSOLE	1
+#define CONFIG_BFIN_SPI_IMG_SIZE 0x50000
+
+#define CONFIG_ADI_GPIO2
 
-#ifndef __ADSPBF542__
-/* Don't waste time transferring a logo over the UART */
-# if (CONFIG_BFIN_BOOT_MODE != BFIN_BOOT_UART)
-#  define CONFIG_VIDEO
-# endif
-# define CONFIG_DEB_DMA_URGENT
+#undef CONFIG_VIDEO
+#ifdef CONFIG_VIDEO
+#define EASYLOGO_HEADER < asm/bfin_logo_230x230_gzip.h >
+#define CONFIG_DEB_DMA_URGENT
 #endif
 
 /* Define if want to do post memory test */
 #undef CONFIG_POST
 #ifdef CONFIG_POST
-#define FLASH_START_POST_BLOCK 11       /* Should > = 11 */
-#define FLASH_END_POST_BLOCK   71       /* Should < = 71 */
+#define CONFIG_POST_BSPEC1_GPIO_LEDS \
+	GPIO_PG6, GPIO_PG7, GPIO_PG8, GPIO_PG9, GPIO_PG10, GPIO_PG11,
+#define CONFIG_POST_BSPEC2_GPIO_BUTTONS \
+	GPIO_PB8, GPIO_PB9, GPIO_PB10, GPIO_PB11
+#define CONFIG_POST_BSPEC2_GPIO_NAMES \
+	13, 12, 11, 10,
+#define CONFIG_SYS_POST_FLASH_START	10
+#define CONFIG_SYS_POST_FLASH_END	127
 #endif