X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fbur_am335x_common.h;h=240fc464bc260060c219f996672f1fea49f84c25;hb=10697704ca579850b0edc0e772671c32586d76ee;hp=e9d5d0162013b63a22a20a710a86ff855fbd1e09;hpb=1454ba8e56d88a8b95ac8050cde2c07c651cd0ae;p=u-boot

diff --git a/include/configs/bur_am335x_common.h b/include/configs/bur_am335x_common.h
index e9d5d01620..240fc464bc 100644
--- a/include/configs/bur_am335x_common.h
+++ b/include/configs/bur_am335x_common.h
@@ -12,6 +12,31 @@
 #ifndef __BUR_AM335X_COMMON_H__
 #define __BUR_AM335X_COMMON_H__
 /* ------------------------------------------------------------------------- */
+#define BUR_COMMON_ENV \
+"defaultip=192.168.60.253\0" \
+"defaultsip=192.168.60.254\0" \
+"netconsole=echo switching to network console ...; " \
+"if dhcp; then " \
+"setenv ncip ${serverip}; else " \
+"setenv ncip 192.168.60.254; " \
+"setenv serverip 192.168.60.254; " \
+"setenv gatewayip 192.168.60.254; " \
+"setenv ipaddr 192.168.60.1; " \
+"fi;" \
+"setenv netdisplay0 '" \
+"setcurs 1 9; puts myip; setcurs 10 9; puts ${ipaddr};" \
+"setcurs 1 10;puts serverip; setcurs 10 10; puts ${serverip};" \
+"run netdisplay0; " \
+"setenv stdout nc;setenv stdin nc;setenv stderr nc\0"
+
+#define CONFIG_CMD_TIME
+#define CONFIG_VIDEO_BMP_GZIP
+#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(1366*767*4)
+#define CONFIG_CMD_UNZIP
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_24BMP
+#define CONFIG_BMP_32BPP
+
 #define CONFIG_SYS_GENERIC_BOARD
 
 #define CONFIG_AM33XX
@@ -47,7 +72,7 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_BOOTP_GATEWAY
 #define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_NET_RETRY_COUNT		4
+#define CONFIG_NET_RETRY_COUNT		2
 #define CONFIG_CMD_PING
 #define CONFIG_DRIVER_TI_CPSW		/* Driver for IP block */
 #define CONFIG_MII			/* Required in net/eth.c */
@@ -57,7 +82,9 @@
 #define CONFIG_SPL_NET_SUPPORT
 #define CONFIG_SPL_ENV_SUPPORT		/* used for a fetching MAC-Address */
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
-
+/* Network console */
+#define CONFIG_NETCONSOLE			1
+#define CONFIG_BOOTP_MAY_FAIL		/* if we don't have DHCP environment */
 /*
  * SPL related defines.  The Public RAM memory map the ROM defines the
  * area between 0x402F0400 and 0x4030B800 as a download area and
@@ -110,11 +137,13 @@
  * we are on so we do not need to rely on the command prompt.  We set a
  * console baudrate of 115200 and use the default baud rate table.
  */
-#define CONFIG_SYS_MALLOC_LEN		(1024 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(5120 << 10)
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT		"U-Boot (BuR V2.0)# "
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_ENV_OVERWRITE		/* Overwrite ethaddr / serial# */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
 
 /* As stated above, the following choices are optional. */
 #define CONFIG_SYS_LONGHELP
@@ -175,7 +204,6 @@
  *
  * ----------------------------------------------------------------------------
  */
-#define CONFIG_SPL_STACK		CONFIG_SYS_INIT_SP_ADDR
 #undef  CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_TEXT_BASE		0x80800000
 #define CONFIG_SPL_BSS_START_ADDR	0x80A00000