X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fcolibri_t20.h;h=46349896d777de1fd4afa7b9748f7acf3df1cbd4;hb=b87ca80b9b1825b44341aa4bcd28c26a7860fd18;hp=a3f27e36a152538cc7e4ad47fc4169d8c304b182;hpb=4d80051b63ff54f6b6f90fceb92cf87ab3401ecb;p=u-boot

diff --git a/include/configs/colibri_t20.h b/include/configs/colibri_t20.h
index a3f27e36a1..46349896d7 100644
--- a/include/configs/colibri_t20.h
+++ b/include/configs/colibri_t20.h
@@ -1,6 +1,8 @@
 /*
  * Copyright (C) 2012 Lucas Stach
  *
+ * Configuration settings for the Toradex Colibri T20 modules.
+ *
  * SPDX-License-Identifier:	GPL-2.0+
  */
 
@@ -9,58 +11,80 @@
 
 #include "tegra20-common.h"
 
+#define CONFIG_ARCH_MISC_INIT
+
 /* High-level configuration options */
-#define V_PROMPT			"Colibri T20 # "
 #define CONFIG_TEGRA_BOARD_STRING	"Toradex Colibri T20"
 
 /* Board-specific serial config */
-#define CONFIG_SERIAL_MULTI
 #define CONFIG_TEGRA_ENABLE_UARTA
 #define CONFIG_TEGRA_UARTA_SDIO1
 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
 
 #define CONFIG_MACH_TYPE		MACH_TYPE_COLIBRI_T20
 
+/* I2C */
+#define CONFIG_SYS_I2C_TEGRA
+
 /* SD/MMC support */
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_TEGRA_MMC
-#define CONFIG_CMD_MMC
 
 /* USB host support */
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
-#define CONFIG_USB_ULPI
-#define CONFIG_USB_ULPI_VIEWPORT
-#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
-#define CONFIG_USB_STORAGE
-#define CONFIG_CMD_USB
+#define CONFIG_USB_MAX_CONTROLLER_COUNT	3
 
 /* USB networking support */
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 
 /* General networking support */
-#define CONFIG_CMD_DHCP
+#define CONFIG_IP_DEFRAG
+#define CONFIG_TFTP_BLOCKSIZE		1536
+#define CONFIG_TFTP_TSIZE
+
+/* LCD support */
+#define CONFIG_SYS_WHITE_ON_BLACK
+#define CONFIG_CMD_BMP
+#define CONFIG_LCD_LOGO
 
 /* NAND support */
 #define CONFIG_CMD_NAND
 #define CONFIG_TEGRA_NAND
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+
+/* Dynamic MTD partition support */
+#define CONFIG_CMD_MTDPARTS	/* Enable 'mtdparts' command line support */
+#define CONFIG_MTD_PARTITIONS
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
+#define MTDIDS_DEFAULT		"nand0=tegra_nand"
+#define MTDPARTS_DEFAULT	"mtdparts=tegra_nand:"		\
+				"2m(u-boot)ro,"			\
+				"1m(u-boot-env),"		\
+				"1m(cfgblock)ro,"		\
+				"-(ubi)"
 
 /* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
 #define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET              (SZ_2M)
-#undef  CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
-#define CONFIG_ENV_SIZE                (SZ_64K)
+#define CONFIG_ENV_OFFSET		(SZ_2M)
+#undef CONFIG_ENV_SIZE		/* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE			(SZ_64K)
+
+/* UBI */
+#define CONFIG_CMD_UBIFS	/* increases size by almost 60 KB */
+#define CONFIG_LZO
+#define CONFIG_RBTREE
 
 /* Debug commands */
-#define CONFIG_CMD_BDI
-#define CONFIG_CMD_CACHE
 
 /* Miscellaneous commands */
 #define CONFIG_FAT_WRITE
 
+#define BOARD_EXTRA_ENV_SETTINGS \
+	"mtdparts=" MTDPARTS_DEFAULT "\0"
+
 /* Increase console I/O buffer size */
 #undef CONFIG_SYS_CBSIZE
 #define CONFIG_SYS_CBSIZE		1024