X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fls1043aqds.h;h=768d75b7232a5c8002e3a53e3610215396050792;hb=19a9747535c105fa458d0c9929e6785cf56d1292;hp=60d189bf09cb39f58ff3be787dee1570a6fc9350;hpb=166ef1e90ce404a6470a1c4910a1e84404379b86;p=u-boot

diff --git a/include/configs/ls1043aqds.h b/include/configs/ls1043aqds.h
index 60d189bf09..768d75b723 100644
--- a/include/configs/ls1043aqds.h
+++ b/include/configs/ls1043aqds.h
@@ -9,11 +9,12 @@
 
 #include "ls1043a_common.h"
 
-#define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #if defined(CONFIG_NAND_BOOT) || defined(CONFIG_SD_BOOT)
 #define CONFIG_SYS_TEXT_BASE		0x82000000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_SYS_TEXT_BASE		0x40010000
 #else
 #define CONFIG_SYS_TEXT_BASE		0x60100000
 #endif
@@ -23,8 +24,8 @@ unsigned long get_board_sys_clk(void);
 unsigned long get_board_ddr_clk(void);
 #endif
 
-#define CONFIG_SYS_CLK_FREQ		100000000
-#define CONFIG_DDR_CLK_FREQ		100000000
+#define CONFIG_SYS_CLK_FREQ		get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ		get_board_ddr_clk()
 
 #define CONFIG_SKIP_LOWLEVEL_INIT
 
@@ -102,12 +103,19 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_LIBATA
 #define CONFIG_SCSI_AHCI
 #define CONFIG_SCSI_AHCI_PLAT
-#define CONFIG_CMD_SCSI
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_EXT2
+#define CONFIG_SCSI
 #define CONFIG_DOS_PARTITION
 #define CONFIG_BOARD_LATE_INIT
 
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM		0
+#define CONFIG_SYS_I2C_EEPROM_ADDR		0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
+#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
+
 #define CONFIG_SYS_SATA				AHCI_BASE_ADDR
 
 #define CONFIG_SYS_SCSI_MAX_SCSI_ID		1
@@ -118,7 +126,7 @@ unsigned long get_board_ddr_clk(void);
 /*
  * IFC Definitions
  */
-#ifndef CONFIG_SD_BOOT_QSPI
+#if !defined(CONFIG_QSPI_BOOT) && !defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_SYS_NOR0_CSPR_EXT	(0x0)
 #define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
 				CSPR_PORT_SIZE_16 | \
@@ -146,7 +154,7 @@ unsigned long get_board_ddr_clk(void);
 					FTIM2_NOR_TWP(0x1c))
 #define CONFIG_SYS_NOR_FTIM3		0
 
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* number of banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
 #define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
@@ -210,10 +218,10 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_SYS_NAND_U_BOOT_SIZE	(640 << 10)
 #endif
 
-#ifdef CONFIG_SD_BOOT_QSPI
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_QIXIS_I2C_ACCESS
+#define CONFIG_SYS_I2C_EARLY_INIT
 #define CONFIG_SYS_NO_FLASH
-#undef CONFIG_CMD_IMLS
 #endif
 
 /*
@@ -233,8 +241,10 @@ unsigned long get_board_ddr_clk(void);
 #define QIXIS_LBMAP_NAND		0x09
 #define QIXIS_LBMAP_SD			0x00
 #define QIXIS_LBMAP_SD_QSPI		0xff
+#define QIXIS_LBMAP_QSPI		0xff
 #define QIXIS_RCW_SRC_NAND		0x106
 #define QIXIS_RCW_SRC_SD		0x040
+#define QIXIS_RCW_SRC_QSPI		0x045
 #define QIXIS_RST_CTL_RESET		0x41
 #define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
 #define QIXIS_RCFG_CTL_RECONFIG_START	0x21
@@ -362,7 +372,7 @@ unsigned long get_board_ddr_clk(void);
 #define VDD_MV_MAX			1212
 
 /* QSPI device */
-#ifdef CONFIG_SD_BOOT_QSPI
+#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI)
 #define CONFIG_FSL_QSPI
 #ifdef CONFIG_FSL_QSPI
 #define CONFIG_SPI_FLASH_SPANSION
@@ -371,22 +381,24 @@ unsigned long get_board_ddr_clk(void);
 #endif
 #endif
 
+/* USB */
+#define CONFIG_HAS_FSL_XHCI_USB
+#ifdef CONFIG_HAS_FSL_XHCI_USB
+#define CONFIG_USB_XHCI_FSL
+#define CONFIG_USB_MAX_CONTROLLER_COUNT		3
+#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS	2
+#endif
+
 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_MISC_INIT_R
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
-#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
-#define CONFIG_SYS_PROMPT		"=> "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_PBSIZE		\
 		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
 
-#define CONFIG_CMD_GREPENV
-#define CONFIG_CMD_MEMINFO
-#define CONFIG_CMD_MEMTEST
 #define CONFIG_SYS_MEMTEST_START	0x80000000
 #define CONFIG_SYS_MEMTEST_END		0x9fffffff
 
@@ -421,6 +433,11 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		0
 #define CONFIG_ENV_SIZE			0x2000
+#elif defined(CONFIG_QSPI_BOOT)
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SIZE			0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET		0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE		0x10000
 #else
 #define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x200000)
@@ -428,10 +445,6 @@ unsigned long get_board_ddr_clk(void);
 #define CONFIG_ENV_SIZE			0x20000
 #endif
 
-#define CONFIG_OF_LIBFDT
-#define CONFIG_OF_BOARD_SETUP
-#define CONFIG_CMD_BOOTZ
-#define CONFIG_CMD_MII
 #define CONFIG_CMDLINE_TAG
 
 #include <asm/fsl_secure_boot.h>