X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fmx6sabre_common.h;h=e59a3b4b058768d1f641ba4e73f2f85a9e26c575;hb=d14c6335bcae5fd1909f6280dcfa064bb62c30f0;hp=bf6113b2aa1a4e6cc095fee93ccfc17bf70b3c67;hpb=6d4511b2c6734842de9de21c1bc0db4c3ea28b72;p=u-boot

diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index bf6113b2aa..e59a3b4b05 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -12,18 +12,21 @@
 #define CONFIG_MX6
 
 #include "mx6_common.h"
-#include <asm/sizes.h>
+#include <linux/sizes.h>
 
 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_DISPLAY_BOARDINFO
 
 #include <asm/arch/imx-regs.h>
+#include <asm/imx-common/gpio.h>
 
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 
+#define CONFIG_SYS_GENERIC_BOARD
+
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
 
@@ -33,6 +36,11 @@
 
 #define CONFIG_MXC_UART
 
+#define CONFIG_CMD_FUSE
+#ifdef CONFIG_CMD_FUSE
+#define CONFIG_MXC_OCOTP
+#endif
+
 /* MMC Configs */
 #define CONFIG_FSL_ESDHC
 #define CONFIG_FSL_USDHC
@@ -60,6 +68,17 @@
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_ATHEROS
 
+#define CONFIG_CMD_SF
+#ifdef CONFIG_CMD_SF
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_STMICRO
+#define CONFIG_MXC_SPI
+#define CONFIG_SF_DEFAULT_BUS		0
+#define CONFIG_SF_DEFAULT_CS		(0 | (IMX_GPIO_NR(4, 9) << 8))
+#define CONFIG_SF_DEFAULT_SPEED		20000000
+#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
+#endif
+
 /* allow to overwrite serial and ethaddr */
 #define CONFIG_ENV_OVERWRITE
 #define CONFIG_CONS_INDEX              1
@@ -78,11 +97,33 @@
 #define CONFIG_LOADADDR                        0x12000000
 #define CONFIG_SYS_TEXT_BASE           0x17800000
 
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+#define EMMC_ENV \
+	"emmcdev=2\0" \
+	"update_emmc_firmware=" \
+		"if test ${ip_dyn} = yes; then " \
+			"setenv get_cmd dhcp; " \
+		"else " \
+			"setenv get_cmd tftp; " \
+		"fi; " \
+		"if ${get_cmd} ${update_sd_firmware_filename}; then " \
+			"if mmc dev ${emmcdev} && " \
+				"mmc open ${emmcdev} 1; then "	\
+				"setexpr fw_sz ${filesize} / 0x200; " \
+				"setexpr fw_sz ${fw_sz} + 1; "	\
+				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
+				"mmc close ${emmcdev} 1; " \
+			"fi; "	\
+		"fi\0"
+#else
+#define EMMC_ENV ""
+#endif
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"script=boot.scr\0" \
-	"uimage=uImage\0" \
+	"image=zImage\0" \
 	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
-	"fdt_addr=0x11000000\0" \
+	"fdt_addr=0x18000000\0" \
 	"boot_fdt=try\0" \
 	"ip_dyn=yes\0" \
 	"console=" CONFIG_CONSOLE_DEV "\0" \
@@ -104,28 +145,29 @@
 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 			"fi; "	\
 		"fi\0" \
+	EMMC_ENV	  \
 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
 		"root=${mmcroot}\0" \
 	"loadbootscript=" \
 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 	"bootscript=echo Running bootscript from mmc ...; " \
 		"source\0" \
-	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
+	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 	"mmcboot=echo Booting from mmc ...; " \
 		"run mmcargs; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if run loadfdt; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0" \
 	"netargs=setenv bootargs console=${console},${baudrate} " \
 		"root=/dev/nfs " \
@@ -137,19 +179,19 @@
 		"else " \
 			"setenv get_cmd tftp; " \
 		"fi; " \
-		"${get_cmd} ${uimage}; " \
+		"${get_cmd} ${image}; " \
 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
-				"bootm ${loadaddr} - ${fdt_addr}; " \
+				"bootz ${loadaddr} - ${fdt_addr}; " \
 			"else " \
 				"if test ${boot_fdt} = try; then " \
-					"bootm; " \
+					"bootz; " \
 				"else " \
 					"echo WARN: Cannot load the DT; " \
 				"fi; " \
 			"fi; " \
 		"else " \
-			"bootm; " \
+			"bootz; " \
 		"fi;\0"
 
 #define CONFIG_BOOTCOMMAND \
@@ -158,7 +200,7 @@
 		"if run loadbootscript; then " \
 		"run bootscript; " \
 		"else " \
-			"if run loaduimage; then " \
+			"if run loadimage; then " \
 				"run mmcboot; " \
 			"else run netboot; " \
 			"fi; " \
@@ -171,7 +213,6 @@
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_HUSH_PARSER
 #define CONFIG_SYS_PROMPT_HUSH_PS2     "> "
-#define CONFIG_SYS_PROMPT              "U-Boot > "
 #define CONFIG_AUTO_COMPLETE
 #define CONFIG_SYS_CBSIZE              256
 
@@ -185,7 +226,6 @@
 #define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000
 
 #define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR
-#define CONFIG_SYS_HZ                  1000
 
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_STACKSIZE               (128 * 1024)