X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fpm9261.h;h=4a71927217c67a83a3dcdabfd068f4ac4d27b458;hb=c0e7bd6661ee2c117d9543b674c968d711a9aed9;hp=67b40b2fcc708e9d7dff517e96e6da5eb959fbc5;hpb=3be2bdf5dc69b3142c1162a59bc67191c9077567;p=u-boot

diff --git a/include/configs/pm9261.h b/include/configs/pm9261.h
index 67b40b2fcc..4a71927217 100644
--- a/include/configs/pm9261.h
+++ b/include/configs/pm9261.h
@@ -28,8 +28,6 @@
 #define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
 #define CONFIG_SYS_AT91_MAIN_CLOCK	18432000
 
-#define CONFIG_SYS_HZ		1000
-
 #define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"
 #define CONFIG_PM9261		1	/* on a Ronetix PM9261 Board	*/
 #define CONFIG_ARCH_CPU_INIT
@@ -52,15 +50,13 @@
 #define	CONFIG_SYS_MCKR1_VAL		\
 		(AT91_PMC_MCKR_CSS_SLOW |	\
 		 AT91_PMC_MCKR_PRES_1 |	\
-		 AT91_PMC_MCKR_MDIV_2 |	\
-		 AT91_PMC_MCKR_PLLADIV_1)
+		 AT91_PMC_MCKR_MDIV_2)
 
 /* PCK/2 = MCK Master Clock from PLLA */
 #define	CONFIG_SYS_MCKR2_VAL		\
 		(AT91_PMC_MCKR_CSS_PLLA |	\
 		 AT91_PMC_MCKR_PRES_1 |	\
-		 AT91_PMC_MCKR_MDIV_2 |	\
-		 AT91_PMC_MCKR_PLLADIV_1)
+		 AT91_PMC_MCKR_MDIV_2)
 
 /* define PDC[31:16] as DATA[31:16] */
 #define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
@@ -168,9 +164,9 @@
 
 /* LED */
 #define CONFIG_AT91_LED
-#define	CONFIG_RED_LED		AT91_PIO_PORTC, 12
-#define	CONFIG_GREEN_LED	AT91_PIO_PORTC, 13
-#define	CONFIG_YELLOW_LED	AT91_PIO_PORTC, 15
+#define CONFIG_RED_LED		GPIO_PIN_PC(12)
+#define CONFIG_GREEN_LED	GPIO_PIN_PC(13)
+#define CONFIG_YELLOW_LED	GPIO_PIN_PC(15)
 
 #define CONFIG_BOOTDELAY	3
 
@@ -223,8 +219,8 @@
 #define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
 /* our CLE is AD21 */
 #define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
-#define CONFIG_SYS_NAND_ENABLE_PIN		AT91_PIO_PORTC, 14
-#define CONFIG_SYS_NAND_READY_PIN		AT91_PIO_PORTA, 16
+#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PC(14)
+#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(16)
 
 /* NOR flash */
 #define CONFIG_SYS_FLASH_CFI			1
@@ -245,6 +241,7 @@
 
 /* USB */
 #define CONFIG_USB_ATMEL
+#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
 #define CONFIG_USB_OHCI_NEW			1
 #define CONFIG_DOS_PARTITION			1
 #define CONFIG_SYS_USB_OHCI_CPU_INIT		1