X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;ds=sidebyside;f=include%2Fconfigs%2Fv38b.h;h=8b2f39c9100eceaad06e179412ba43c39a2e6f1c;hb=7d0f5c1300555101e1625ed7256ee6c3502e8482;hp=5ebdf5b40240076c5c62d76a042ec1d38a0b21bf;hpb=c6f086ddcbfb47918b82f6a135c61f432540da42;p=u-boot

diff --git a/include/configs/v38b.h b/include/configs/v38b.h
index 5ebdf5b402..8b2f39c910 100644
--- a/include/configs/v38b.h
+++ b/include/configs/v38b.h
@@ -14,7 +14,6 @@
  */
 #define CONFIG_MPC5200			1	/* This is an MPC5200 CPU */
 #define CONFIG_V38B			1	/* ...on V38B board */
-#define CONFIG_DISPLAY_BOARDINFO
 
 #define	CONFIG_SYS_TEXT_BASE		0xFF000000
 
@@ -28,7 +27,6 @@
 #define CONFIG_NETCONSOLE		1
 
 #define CONFIG_BOARD_EARLY_INIT_R	1	/* do board-specific init */
-#define CONFIG_BOARD_EARLY_INIT_F	1	/* do board-specific init */
 #define CONFIG_MISC_INIT_R
 
 #define CONFIG_SYS_XLB_PIPELINING		1	/* gives better performance */
@@ -39,7 +37,6 @@
  * Serial console configuration
  */
 #define CONFIG_PSC_CONSOLE	1	/* console is on PSC1 */
-#define CONFIG_BAUDRATE		115200	/* ... at 115200 bps */
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200, 230400 }
 
 /*
@@ -57,19 +54,11 @@
 /*
  * PCI - no support
  */
-#undef CONFIG_PCI
-
-/*
- * Partitions
- */
-#define CONFIG_MAC_PARTITION	1
-#define CONFIG_DOS_PARTITION	1
 
 /*
  * USB
  */
 #define CONFIG_USB_OHCI
-#define CONFIG_USB_STORAGE
 #define CONFIG_USB_CLOCK	0x0001BBBB
 #define CONFIG_USB_CONFIG	0x00001000
 
@@ -84,12 +73,9 @@
 /*
  * Command line configuration.
  */
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_DIAG
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_JFFS2
 #define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_DATE
 
 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */
 
@@ -147,27 +133,6 @@
  */
 #undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK			/* define for 133MHz speed */
 
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C		1	/* I2C with hardware support */
-#define CONFIG_SYS_I2C_MODULE		2	/* Select I2C module #1 or #2 */
-#define CONFIG_SYS_I2C_SPEED		100000	/* 100 kHz */
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * EEPROM configuration
- */
-#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50	/* 1010000x */
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	3
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	70
-
-/*
- * RTC configuration
- */
-#define CONFIG_SYS_I2C_RTC_ADDR		0x51
-
 /*
  * Flash configuration - use CFI driver
  */
@@ -294,8 +259,6 @@
 /*
  * Status LED
  */
-#define  CONFIG_STATUS_LED		/* Status LED enabled */
-#define  CONFIG_BOARD_SPECIFIC_LED	/* version has board specific leds */
 
 #define CONFIG_SYS_LED_BASE	MPC5XXX_GPT7_ENABLE	/* Timer 7 GPIO */
 #ifndef __ASSEMBLY__