X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=CHANGELOG;h=5d21db1b2db2711b90951bccbd1d56552a4cdcf1;hb=refs%2Fheads%2Flwmon5;hp=d5eae562ac3b53fb89e2ebfb2907cb7f3d6a74c1;hpb=38b189fe749824ea9b1c5422865e78b4b7eb2494;p=u-boot diff --git a/CHANGELOG b/CHANGELOG index d5eae562ac..5d21db1b2d 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,3990 @@ +commit 7c0773fde6100b61be2558cb5d8c442a3194aecb +Author: Wolfgang Denk +Date: Sun May 4 00:35:15 2008 +0200 + + drivers/net/tsec.c: Fix typo. + + Signed-off-by: Wolfgang Denk + +commit aa737945e6f37a5de5dbad550a7694e0cb2a8120 +Author: Mike Frysinger +Date: Fri May 2 21:45:12 2008 -0400 + + version_autogenerated.h: use printf rather than echo -n + + Some systems are dumb and do not implement the -n flag to echo (like OS X). + Convert the Makefile to use printf as this should work everywhere. + + Signed-off-by: Mike Frysinger + Signed-off-by: Wolfgang Denk + +commit 4acc2a108ad0a669165924704a6cb083f9138242 +Author: Mike Frysinger +Date: Fri May 2 18:17:50 2008 -0400 + + fix building when saveenv is disabled in some setups + + If you enable environment in the flash, but disable the embedded + option, and you disable the saveenv command, then the #if nested + logic will trigger a compile failure: + env_flash.c: In function 'env_relocate_spec': + env_flash.c:399: error: 'flash_addr' undeclared (first use in this function) + The fix is to add CMD_SAVEENV ifdef protection like everywhere else. + + Signed-off-by: Mike Frysinger + +commit ccf1ad535ae1c0dc2d466235c668adbdfe3a55b7 +Author: Jeremy McNicoll +Date: Fri May 2 16:10:04 2008 -0400 + + SBC8548: fix address mask to allow 64M flash + + Fix incorrect mask to enable all 64MB of onboard flash. + Previously U-Boot incorrectly mapped only 8MB of flash, this + patch correctly maps all the available flash. + + Signed-off-by: Jeremy McNicoll + +commit 3648085c464c8c22ef76fab006ca4344d3796124 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 2 19:48:56 2008 +0200 + + qemu_mips: add README + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6fdd002689190a0022c7b3dbab37fcba724580ce +Author: Marcel Ziswiler +Date: Fri May 2 02:35:59 2008 +0200 + + Fix misspelled comment + + Signed-off-by: Marcel Ziswiler + +commit fa956fde60b7ec4dd66bd62f9910fd341b5049a1 +Author: Mike Frysinger +Date: Thu May 1 04:13:05 2008 -0400 + + mkimage: make mmap() checks consistent + + The mmap() related code is full of inconsistent casts/constants when + it comes to error checking, and may break when building on some + systems (like ones that do not implicitly define the caddr_t type). + Let's just avoid the whole mess by writing the code nice and clean in + the first place. + + Signed-off-by: Mike Frysinger + +commit 8e90cd0447a0f0ccf529ef86f0e6b56187d3b82a +Author: Marcel Ziswiler +Date: Thu May 1 09:05:34 2008 +0200 + + Fix defined but not used build warning + + - warning: 'srom' defined but not used + + Signed-off-by: Marcel Ziswiler + +commit b71190f3250aaffcc81c35f6cfd3498cb7c48013 +Author: Marcel Ziswiler +Date: Thu May 1 09:05:26 2008 +0200 + + Fix implicit declaration build warnings + + - warning: implicit declaration of function ‘serial_initialize’ + + Signed-off-by: Marcel Ziswiler + +commit 9acde129cc3f9c1b3bc11a821480dd446774d618 +Author: Andre Schwarz +Date: Tue Apr 29 19:18:32 2008 +0200 + + TSEC: add config options for VSC8601 RGMII PHY + + The Vitesse VSC8601 RGMII PHY has internal delay for both Rx + and Tx clock lines. They are configured using 2 bits in extended + register 0x17. + Therefore CFG_VSC8601_SKEW_TX and CFG_VSC8601_SKEW_RX have + been introduced with valid values 0-3 giving 0.0, 1.4,1.7 and 2.0ns delay. + + Signed-off-by: Andre Schwarz + Acked-by: Andy Fleming + Acked-by: Ben Warren + -- + + drivers/net/tsec.c | 6 ++++++ + drivers/net/tsec.h | 3 +++ + 2 files changed, 9 insertions(+), 0 deletions(-) + +commit bd98ee60df43ee6dd6f5ebe32c67d03e90513ff8 +Author: Wolfgang Denk +Date: Sat May 3 23:07:15 2008 +0200 + + Revert "ColdFire: Get information from the correct GCC" + + This reverts commit b7166e05a513c0806b63b9dfb6f1d77645cede2a + (replaced by commit c4e5f52a58d278eebb87f476e353972c5dacea40). + +commit c4e5f52a58d278eebb87f476e353972c5dacea40 +Author: Wolfgang Denk +Date: Sat May 3 22:25:00 2008 +0200 + + config.mk: use correct (cross) compiler + + Some config.mk files reference $(CC) to test for specific tool chain + features, so make sure $(CC) gets set before including any such + config files. + + This patch replaces commit b7166e05a5 ("ColdFire: Get information from + the correct GCC"). + + Signed-off-by: Wolfgang Denk + +commit 27c38689d0cfde0e444239345f97b5eecc9f4067 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu May 1 02:13:44 2008 +0200 + + pxa: fix previous definition on cpu init + + start.S:183:1: warning: "ICMR" redefined + In file included from start.S:33: + include/asm/arch/pxa-regs.h:935:1: warning: this is the location of the previous definition + start.S:187:1: warning: "RCSR" redefined + ... + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6d12e697de794d700767f22f950e3026ccf4daf6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu May 1 02:13:43 2008 +0200 + + pxa: fix pcmcia operation on 'i' may be undefined + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk + +commit 4d77f5102dfeaa36cd58d9a9f083bd2cc491526f +Author: Kumar Gala +Date: Wed Apr 30 16:24:35 2008 -0500 + + MPC8610HPCD: Drop -O2 from the build flags + + Make the flags use -Os like all other boards + + Signed-off-by: Kumar Gala + +commit 0072b78be2b41e5a0ca3ddc39335574dc2e855bd +Author: Stefan Roese +Date: Wed Apr 30 15:50:39 2008 +0200 + + RTC: Fix month offset by one problem in M41T62 RTC driver + + This patch fixes a problem with the month being read and written + incorrectly (offset by one). This only gets visible by also using + the Linux driver (rtc-m41t80). + + Tested on AMCC Canyonlands. + + Signed-off-by: Stefan Roese + +commit 141ba1cad8e6598a2466e7e2976c6a12285df619 +Author: Shinya Kuribayashi +Date: Sat May 3 13:51:44 2008 +0900 + + [MIPS] cpu/mips/config.mk: Fix GNU assembler minor version picker + + Current trick to pick up GNU assembler minor version uses a dot(.) as a + delimiter, and take the second field to obtain minor version number. But + as can be expected, this doesn't work with a version string which has + dots more than needs. + + Here's an example: + + $ mips-linux-gnu-as --version | grep 'GNU assembler' + GNU assembler (Sourcery G++ Lite 4.2-129) 2.18.50.20080215 + $ mips-linux-gnu-as --version | grep 'GNU assembler' | cut -d. -f2 + 2-129) 2 + $ + + This patch restricts the version format to 2.XX.XX... This will work + in most cases. + + $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' + 2.18.50.20080215 + $ mips-linux-gnu-as --version | grep 'GNU assembler' | egrep -o '2\.[0-9\.]+' | cut -d. -f2 + 18 + $ + + Signed-off-by: Shinya Kuribayashi + +commit ea638951acead7f1086c908c0b9f086beab82a22 +Author: Shinya Kuribayashi +Date: Sat May 3 13:51:28 2008 +0900 + + [MIPS] cpu/mips/cache.S: Add dcache_enable + + Recent bootelf command fixes (017e9b7925f74878d0e9475388cca9bda5ef9482, + "allow ports to override bootelf behavior") requires ports to have this + function. + + Signed-off-by: Shinya Kuribayashi + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d2c6fbec4397c936b18cd42482b6973cd6781bdf +Author: Wolfgang Denk +Date: Thu May 1 21:30:16 2008 +0200 + + onenand: rename 16 bit memory copy into memcpy_16() to avoid conflicts + + Onenand needs a version of memcpy() which performs 16 bit accesses + only; make sure the name does not conflict with the standard + function. + + Signed-off-by: Wolfgang Denk + +commit 12bc4e94251c369c529ffa505cf58b148c372f7f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 30 22:38:17 2008 +0200 + + cmd_nand: fix warning: str2long ncompatible pointer type + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1b9ed2574a38c93cb03dad41885fc06be4bfc9dd +Author: Timur Tabi +Date: Fri Apr 4 11:16:11 2008 -0500 + + Fix calculation of I2C clock for some 86xx chips + + Some 86xx chips use CCB as the base clock for the I2C, and others used CCB/2. + There is no pattern that can be used to determine which chips use which + frequency, so the only way to determine is to look up the actual SOC + designation and use the right value for that SOC. + + Signed-off-by: Timur Tabi + +commit f32f7fe7bd3a5bda3a476520f00e1aca7c2103a9 +Author: TsiChung Liew +Date: Wed Apr 30 12:11:19 2008 -0500 + + ColdFire: Fix ethernet hang issue for mcf547x_8x + + The ethernet hang is caused by receiving buffer in DRAM is not + yet ready due to access cycles require longer time in DRAM. + Relocate DMA buffer descriptors from DRAM to internal SRAM. + + Signed-off-by: TsiChung Liew + +commit 886d90176fc257e0ab4d0db05d11d0749bbed3ca +Author: TsiChung Liew +Date: Wed Apr 30 12:10:47 2008 -0500 + + ColdFire: Fix compilation issue caused by new changes in fsl_i2c.c + + Signed-off-by: Luigi Comio Mantellini + Signed-off-by: TsiChung Liew + +commit b7166e05a513c0806b63b9dfb6f1d77645cede2a +Author: TsiChung Liew +Date: Wed Apr 30 12:10:23 2008 -0500 + + ColdFire: Get information from the correct GCC + + Signed-off-by: Kurt Mahan + Signed-off-by: TsiChung Liew + +commit 378e7ec95da4751ec8fe461baacab2bf7d2512a9 +Author: dirk.behme@googlemail.com +Date: Wed Apr 30 18:02:59 2008 +0200 + + Fix warning in env_nand.c if compiled for DaVinci Schmoogie + + Fix warnings + + nv_nand.c: In function 'saveenv': + env_nand.c:200: warning: passing argument 3 of 'nand_write' from incompatible pointer type + env_nand.c: In function 'env_relocate_spec': + env_nand.c:275: warning: passing argument 3 of 'nand_read' from incompatible pointer type + + if compiled for davinci_schmoogie_config. + + Signed-off-by: Dirk Behme + Ack by: Sergey Kubushyn + +commit 33a4a70d48d622cc4950c60a84fec23b9421f23e +Author: Anatolij Gustschin +Date: Wed Apr 30 13:34:40 2008 +0200 + + Fix warnings while compiling net/net.c for MPC8610HPCD board + + MPC8610HPCD board adds -O2 gcc option to PLATFORM_CPPFLAGS + causing overriding default -Os option. New gcc (ver. 4.2.2) + produces warnings while compiling net/net.c file with -O2 + option. The patch is an attempt to fix this. + + Signed-off-by: Anatolij Gustschin + +commit 58b575e575c25fdf8c88141e145db201f3092149 +Author: Sascha Laue +Date: Wed Apr 30 15:23:38 2008 +0200 + + lwmon5: fix offset error in sysmon0 POST + + Signed-off-by: Sascha Laue + Signed-off-by: Wolfgang Denk + +commit e7419b243a373de4ee042f7d4f45f66de787240d +Author: Sascha Laue +Date: Wed Apr 30 15:16:35 2008 +0200 + + lwmon5: fix manual merge error in POST + + Signed-off-by: Sascha Laue + +commit 42ffcec3f9eba010a662d5b42981812b6bebfb9a +Author: Wolfgang Denk +Date: Wed Apr 30 17:46:26 2008 +0200 + + cmd_nand.c: fix another 'incompatible pointer type' warning. + + Signed-off-by: Wolfgang Denk + +commit de109d909707e2dfe806be5efc3cdb103b47c8ad +Author: Wolfgang Denk +Date: Wed Apr 30 17:25:07 2008 +0200 + + Makefile: fix parallel builds + + This problem shows up with parallel builds only; it results in + somewhat cryptic error messages like + + $ JOBS=-j6 MAKEALL netstar + Configuring for netstar board... + arm-linux-ld: cannot find -lgeneric + make[1]: *** [eeprom.srec] Error 1 + + A few boards (like netstar and voiceblue) need some libraries for + building; however, the board Makefile does not contain any such + dependencies which may cause problems with parallel builds. Adding + such dependencies is difficult as we would also have to provide build + rules, which already exist in the respective library Makefiles. + + To solve this, we make sure that all libraries get built before the + board code. + + Signed-off-by: Wolfgang Denk + +commit 4f27098e5b0736989b13cd61d7bca94b3574cf5f +Author: Stefan Roese +Date: Wed Apr 30 14:51:36 2008 +0200 + + ppc4xx: Adapt Canyonlands fixed DDR2 setup to new DIMM module + + This patch changes the Canyonlands/Glacier fixed DDR2 controller setup + used for NAND booting to match the values needed for the new 512MB + DIMM modules shipped with the productions boards: + + Crucial: CT6464AC667.8FB + + Signed-off-by: Stefan Roese + +commit ea9202a659dc75996facf1475f1866a19a9d3129 +Author: Stefan Roese +Date: Wed Apr 30 10:49:43 2008 +0200 + + ppc4xx: Fix problem with DIMMs with 8 banks in 44x_spd_ddr2.c + + This patch fixes a problem with DIMMs that have 8 banks. Now the + MCIF0_MBxCF register will be setup correctly for this setup too. + + This was noticed with the 512MB DIMM on Canyonlands/Glacier. + + Signed-off-by: Stefan Roese + +commit 76617299358ebba260ecc02d33e8e75d8d13dd3b +Author: Wolfgang Denk +Date: Tue Apr 29 23:41:06 2008 +0200 + + Prepare v1.3.3-rc2, again. + + Signed-off-by: Wolfgang Denk + +commit b7fcc4c13993782342cf5cd20d237a6281648a0b +Author: Wolfgang Denk +Date: Tue Apr 29 23:35:24 2008 +0200 + + Prepare v1.3.3-rc2 + + Signed-off-by: Wolfgang Denk + +commit f7b16a0a4d571dd33b2b5185a54f7ddc311f89d4 +Author: Wolfgang Denk +Date: Tue Apr 29 23:32:20 2008 +0200 + + common/env_nand.c: fix one more incompatible pointer type issue + + Signed-off-by: Wolfgang Denk + +commit ea6f66894f952229eebfc4ad03cd21fe5c8b3f0f +Author: Wolfgang Denk +Date: Tue Apr 29 21:33:08 2008 +0200 + + post/board/lwmon5/sysmon.c: fix manual merge error. + + Signed-off-by: Wolfgang Denk + +commit 70a0f81412b0b18a6fd0bea960451bc6c2cca49a +Author: Kumar Gala +Date: Tue Apr 29 12:54:59 2008 -0500 + + 85xx: Add -mno-spe to e500/85xx builds + + Newer gcc's might be configured to enable autovectorization by default. + If we happen to build with one of those compilers we will get SPE + instructions in random code. + + -mno-spe disables the compiler for automatically generating SPE + instructions without our knowledge. + + Signed-off-by: Kumar Gala + +commit 8ea08e5be69436abcc95d3da114de4a2ff8a6ab5 +Author: Kumar Gala +Date: Tue Apr 29 10:18:34 2008 -0500 + + Update .gitignore for zlib.h + + Signed-off-by: Kumar Gala + +commit 45239cf4152109caa925145ccd433529902df887 +Author: Kumar Gala +Date: Tue Apr 29 10:27:08 2008 -0500 + + 85xx/86xx: Rename ext_refrec to timing_cfg_3 to match docs + + All the 85xx and 86xx UM describe the register as timing_cfg_3 + not as ext_refrec. + + Signed-off-by: Kumar Gala + +commit ef7d30b14394e4c4a153118f5845760cadada02a +Author: Kumar Gala +Date: Tue Apr 29 10:28:34 2008 -0500 + + 85xx/86xx: Rename DDR init address and init extended address register + + Rename init_addr and init_ext_addr to match the docs between + 85xx and 86xx. Both now use 'init_addr' and 'init_ext_addr'. + + Signed-off-by: Kumar Gala + +commit cf6cc014270549684873a5972d2595052c468cb6 +Author: Kumar Gala +Date: Mon Apr 28 02:24:04 2008 -0500 + + 85xx: Additional fixes and cleanup of MP code + + * adjust __spin_table alignment to match ePAPR v0.94 spec + * loop over all cpus when determing who is up. This fixes an issue if + the "boot cpu" isn't core0. The "boot cpu" will already be in the + cpu_up_mask so there is no harm + * Added some protection in the code to ensure proper behavior. These + changes are explicitly needed but don't hurt: + - Added eieio to ensure the "hot word" of the table is written after + all other table updates have occurred. + - Added isync to ensure we don't prefetch loading of table entries + until we a released + + These issues we raised by Dave Liu. + + Signed-off-by: Kumar Gala + +commit b2d527a8b9fb50afccbaf79b5540952585cdc760 +Author: Yuri Tikhonov +Date: Tue Apr 29 15:06:41 2008 +0200 + + lwmon5: minor clean-up to include/configs/lwmon5.h + + LWMON5 DSPIC POST uses the watch-dog scratch register. So, make + the CFG_DSPIC_TEST_ADDR definition more readable. + + Signed-off-by: Yuri Tikhonov + +commit f4c4d21a885ccc222fd0acdf653b683249e85117 +Author: Stefan Roese +Date: Tue Apr 29 16:08:05 2008 +0200 + + ppc4xx: Fix CFG_MONITOR_LEN on Katmai failsave this time + + Signed-off-by: Stefan Roese + +commit 138105efe1d2b1a40a3a97b4c1f85c2111bea2d8 +Author: Yuri Tikhonov +Date: Tue Apr 29 13:32:45 2008 +0200 + + ppc flush_cache: add watch-dog triggering into the loops. + + Some boards (e.g. lwmon5) need rather a frequent watch-dog + kicking. Since the time it takes for the flush_cache() function + to complete its job depends on the size of data being flushed, one + may encounter watch-dog resets on such boards when, for example, + download big files over ethernet. + + Signed-off-by: Yuri Tikhonov + +commit cab99d6f3281ab6784feccf98b9b425daa58418a +Author: Stefan Roese +Date: Tue Apr 29 14:44:54 2008 +0200 + + ppc4xx: Fix compilation warning in denali_spd_ddr2.c + + Signed-off-by: Stefan Roese + +commit 4ec9d78fe5cd585d2868731fa108ca1e62730e70 +Author: Stefan Roese +Date: Tue Apr 29 14:12:07 2008 +0200 + + ppc4xx: Fix Katmai CFG_MONITOR_LEN + + Signed-off-by: Stefan Roese + +commit 85ad184b3b2b0f8af9228477303c55dca1b52ed7 +Author: Stefan Roese +Date: Tue Apr 29 13:57:07 2008 +0200 + + ppc4xx: Complete remove bogus dflush() + + Since the current dflush() implementation is know to have some problems + (as seem on lwmon5 ECC init) this patch removes it completely and replaces + it by using clean_dcache_range(). + + Tested on Katmai with ECC DIMM. + + Signed-off-by: Stefan Roese + +commit 135846d6ecaad255ad28d93ebbb78b3d5da68cdc +Author: Stefan Roese +Date: Tue Apr 29 13:36:51 2008 +0200 + + ppc4xx: Change ECC initialization on lwmon5 to use clean_dcache_range() + + As it seems the "old" ECC initialization routine by using dflush() didn't + write all lines in the dcache back to memory on lwmon5. This could lead + to ECC error upon Linux booting. This patch changes the program_ecc() + routine to now use clean_dcache_range() instead of dflush(). + clean_dcache_range() uses dcbst which is exactly what we want in this + case. + + Since dflush() is known is cause problems, this routine will be + removed completely and replaced by clean_dcache_range() with an + additional patch. + + Signed-off-by: Stefan Roese + +commit 18ec19e4aa1a045dfbf2c7c2e33963488e92d757 +Author: Yuri Tikhonov +Date: Mon Apr 28 18:19:34 2008 +0200 + + POST: fix Makefiles for mpc8xx, lwmon, and netta POSTs. + + Signed-off-by: Yuri Tikhonov + +commit eea5a743a2193ef2a05b9bc6dc447ba241416f35 +Author: Markus Brunner +Date: Mon Apr 28 08:47:47 2008 +0200 + + ppc4xx: Fixup ebc clock in FDT for 405GP/EP + + On ppc405EP and ppc405GP (at least) the ebc is directly attached to the plb + and not to the opb. This patch will try to fixup /plb/ebc if /plb/opb/ebc + doesn't exist. + + Signed-off-by: Markus Brunner + +commit 2ef7503a593c77a80c2a054011970227c4b62774 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Apr 24 07:57:17 2008 +0200 + + NE2000: Fix regresssion introduced by e710185aae90 on non AX88796 + + Move non-inlied functions into specific drivers file + Set get_prom as weak + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Vlad Lungu + Signed-off-by: Ben Warren + +commit 40cb90ee2b97db1f697e1b54f19a548ffc96d71b +Author: Guennadi Liakhovetski +Date: Thu Apr 3 17:04:19 2008 +0200 + + net: make ARP timeout configurable + + Currently the timeout waiting for an ARP reply is hard set to 5 seconds. + On i.MX31ADS due to a hardware "strangeness" up to four first IP packets + to the boards get lost, which typically are ARP replies. By configuring + the timeout to a lower value we significantly improve the first network + transfer time on this board. The timeout is specified in milliseconds, + later internally it is converted to deciseconds, because it has to be + converted to hardware ticks, and CFG_HZ ranges from 900 to 27000000 on + different boards. + + Signed-off-by: Guennadi Liakhovetski + Signed-off-by: Ben Warren + +commit 13e0b8f7ca9d29267bf01d7a01e521a0517adce1 +Author: Guennadi Liakhovetski +Date: Thu Apr 3 13:36:18 2008 +0200 + + minor cs8900 driver clean up + + Remove a redundant register definition, clean up some coding style + violations. + + Signed-off-by: Guennadi Liakhovetski + Signed-off-by: Ben Warren + +commit 707fa917cca24c0f22776f48ac4a6fa5e5189b10 +Author: Wolfgang Denk +Date: Mon Apr 28 22:01:04 2008 +0200 + + jffs2_1pass.c: fix incompatible pointer type warning + + Signed-off-by: Wolfgang Denk + +commit 6aee00f5e6a1cf29d8fe8fdc9b7252fbd31115d9 +Author: Sascha Laue +Date: Tue Apr 1 10:10:18 2008 +0200 + + lwmon5: update dsPIC POST spezification + + The specification for the lwmon5 board dsPIC POST got changed. + Also add defines for the temperatures and voltages. + + Signed-off-by: Sascha Laue + +commit 3e4615ab7ff38781a5dd80d0f49b9af55b4fe0b7 +Author: Sascha Laue +Date: Tue Apr 1 15:13:03 2008 +0200 + + Fix watchdog POST for lwmon5 + + If the hardware watchdog detects a voltage error, the watchdog sets + GPIO62 to low. The watchdog POST has to detect this low level. + + Signed-off-by: Sascha Laue + Signed-off-by: Wolfgang Denk + +commit dd5748bcd669f46aeb6686c1b341323843738ccc +Author: Guennadi Liakhovetski +Date: Mon Apr 28 14:37:14 2008 +0200 + + rtl8169: fix compiler warnings + + Fix multiple compiler warnings related to argument type mismatch. + + Signed-off-by: Guennadi Liakhovetski + +commit 413bf586266f86c6bdbc6c6d140f67a15af4c4f1 +Author: Guennadi Liakhovetski +Date: Mon Apr 28 14:36:06 2008 +0200 + + IDE: fix compiler warnings + + The IDE driver can use 32-bit addresses in LBA mode, in which case it + spits multiple warnings during compilation. Fix them. + + Signed-off-by: Guennadi Liakhovetski + +commit db9084de28c46ac81c8f681722cb0d7411be4d7f +Author: Guennadi Liakhovetski +Date: Mon Apr 28 14:35:57 2008 +0200 + + LinkStation: fix compiler warning, add a maintainer + + out_8 wants a pointer to an unsigned as the first argument. Add a + maintainer for Linkstation boards. + + Signed-off-by: Guennadi Liakhovetski + +commit c71abba3cb67b063f789f17abf6c7447727c0cd5 +Author: Wolfgang Denk +Date: Mon Apr 28 14:55:12 2008 +0200 + + cmd_nand.c: fix "differ in signedness" problem + + Signed-off-by: Wolfgang Denk + +commit f2c288a35341ad02ac03b1563d786763c9c8f159 +Author: Wolfgang Denk +Date: Mon Apr 28 12:48:47 2008 +0200 + + pcnet.c: fix a merge issue + + Signed-off-by: Wolfgang Denk + +commit 4ca79f477ebd25a6872e6196d80e2f5eff441376 +Author: Wolfgang Denk +Date: Mon Apr 28 12:08:18 2008 +0200 + + NAND: fix some strict-aliasing compiler warnings + + Signed-off-by: Wolfgang Denk + +commit 5cd0130ecc79d6dcde1b1ac253abc457ca8c3115 +Author: Stefan Roese +Date: Mon Apr 28 11:37:14 2008 +0200 + + ppc4xx: Fix compile warning of hcu4 board + + Signed-off-by: Stefan Roese + +commit 5379cd15dd6c74ac51499bce3455bf6e0cdbe9f1 +Author: Wolfgang Denk +Date: Mon Apr 28 11:31:23 2008 +0200 + + MPC8323ERDB: fix implicit declaration of function 'mac_read_from_eeprom' + + Signed-off-by: Wolfgang Denk + +commit 7602ed50a2f0ef3dc8d7da93f116de50288f5b59 +Author: Guennadi Liakhovetski +Date: Mon Apr 28 00:25:32 2008 +0200 + + mx31ads: fix loadaddr environment variable define + + Arithmetic expressions do not get evaluated under stringification. Remove + default network configuration, add DHCP command support. Thanks to Felix + Radensky for reporting. + + Signed-off-by: Guennadi Liakhovetski + +commit 144eec777ac07bcb12bd38245a5a289f694a7f98 +Author: Wolfgang Denk +Date: Mon Apr 28 10:55:24 2008 +0200 + + katmai: fix section overlap problem + + Since we didn't want to remove features from the configuration, we + decided to increase the U-Boot image size (add one flash sector). + + Also changed the default environment definition to make it + independent of such changes. + + Signed-off-by: Wolfgang Denk + Acked-by: Stefan Roese + +commit 941d696d25624e3cc65ebf924199541acf52d74e +Author: Wolfgang Denk +Date: Mon Apr 28 10:55:24 2008 +0200 + + katmai: fix section overlap problem + + Since we didn't want to remove features from the configuration, we + decided to increase the U-Boot image size (add one flash sector). + + Also changed the default environment definition to make it + independent of such changes. + + Signed-off-by: Wolfgang Denk + Acked-by: Stefan Roese + +commit 03c6cd39f9184143fd8c537872b3d4b2e03f1466 +Author: Kumar Gala +Date: Sat Apr 26 11:44:44 2008 -0500 + + post: Fix building with O= + + Signed-off-by: Kumar Gala + +commit fd7531c1e9d56b9e5e06d2c0e02b798dab72f70c +Author: Wolfgang Denk +Date: Sat Apr 26 01:55:00 2008 +0200 + + Prepare v1.3.3-rc1 + + Signed-off-by: Wolfgang Denk + +commit 19cf2ec90d8ce52da60c1693693c4048cb810967 +Author: Wolfgang Denk +Date: Sat Apr 26 01:25:39 2008 +0200 + + post/Makefile: make sure to use the correct flags + + ARFLAGS was not set, which caused "ppc_8xx-ar: creating libgenpost.a" + messages to be printed. + + Signed-off-by: Wolfgang Denk + +commit 7ed4011733e7dca8f64d21291e4294662f7dc3e2 +Author: Wolfgang Denk +Date: Sat Apr 26 00:34:42 2008 +0200 + + Coding Style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit f9204e15173834ff8d123e36279ce49c3c6c74fc +Author: Magnus Lilja +Date: Sun Apr 20 10:38:12 2008 +0200 + + i.MX31: Enable SPI and MC13783/RTC support for the Litekit board + + This patch enables SPI and MC13783/RTC support for the Litekit board. + + Signed-off-by: Magnus Lilja + +commit f97abbfb47d9e407354e157cae3f6369e460cd37 +Author: Ed Swarthout +Date: Fri Apr 25 01:08:32 2008 -0500 + + MPC8544DS: decode pcie3 end-point configuration correctly. + + Signed-off-by: Ed Swarthout + Signed-off-by: Kumar Gala + +commit 292188e15523c165c4269403fdcd33c26d89176e +Author: Roy Zang +Date: Fri Apr 25 00:55:09 2008 -0500 + + MPC8544DS: Removes the unknown flash message information + + This patch removes the unknown flash message information: + '## Unknown FLASH on Bank 1 - Size = 0xdeadbeef = -286261248 MB' + This unknown flash message is caused by PromJet. + Some of the board user is unhappy with this information. + + Signed-off-by: Roy Zang + Signed-off-by: Kumar Gala + +commit b2115757403beef0ac6bc2c6c3b24f31256a75d2 +Author: Kim Phillips +Date: Thu Apr 24 14:07:38 2008 -0500 + + mpc83xx: bump loadaddr over fdtaddr to 0x500000 + + this seems as a good compromise between human memory, typing, + and last but not least, to accommodate for current and future kernel bloat. + + Signed-off-by: Kim Phillips + Acked-by: Dave Liu + +commit be5a7190265a34d968578ff266549c60f6f57654 +Author: Dave Liu +Date: Tue Apr 15 13:12:23 2008 +0800 + + mpc83xx: clean up the readme for 83xx boards + + 1. correct the typo + 2. correct the memory map for 837xerdb board + + Signed-off-by: Dave Liu + +commit bcae52a6819ee9dad5d0d96cd7daeb20108d45ff +Author: Dave Liu +Date: Tue Apr 15 13:11:11 2008 +0800 + + mpc83xx: remove the unused CPM's stuff + + The MPC83xx family never have CPM block, so remove it from 83xx. + + Signed-off-by: Dave Liu + +commit c63ad6325a8ac0097a54b418a3288926b0484b18 +Author: Matthias Fuchs +Date: Fri Apr 18 16:29:40 2008 +0200 + + cfi-flash: Add CFG_FLASH_AUTOPROTECT_LIST + + This patch adds a configurable flash auto protection list that can be used + to make U-Boot protect flash regions in flash_init(). + + The idea has been discussed on the u-boot mailing list starting + on Nov 18th, 2007. + + Even this patch brings a new feature it is used as a bugfix for 4xx + platforms where flash_init() does not completely protect the + monitor's flash range in all situations. + + U-Boot protects the flash range from CFG_MONITOR_BASE to + (CFG_MONITOR_BASE + monitor_flash_len - 1) by default. This does not + include the reset vector at 0xfffffffc. + + Example: + #define CFG_FLASH_AUTOPROTECT_LIST {{0xfff80000, 0x80000}} + + This config option will auto protect the last 512k of flash that + contains the bootloader on board like APC405 and PMC405. + + Signed-off-by: Matthias Fuchs + +commit d0d91ae3acb4f29d1a2a3a766747478ed54e2848 +Author: Stefan Roese +Date: Fri Apr 25 13:59:03 2008 +0200 + + ppc4xx: Remove double defines in lwmon5.h + + introduced with latest lwmon5/POST merge + + Signed-off-by: Stefan Roese + +commit 7590378fb9c686709492ceb142825cd058255956 +Author: Bartlomiej Sieka +Date: Fri Apr 25 13:54:02 2008 +0200 + + Use watchdog-aware functions when calculating hashes of images - take two + + Some files didn't get updated properly with the "Use watchdog-aware + functions when calculating hashes of images" commit, this commit + fixes this. + + Signed-off-by: Bartlomiej Sieka + Signed-off-by: Wolfgang Denk + +commit 8e048c438e20ec89b49da5f085f8f756eba6e587 +Author: Matthias Fuchs +Date: Fri Apr 25 12:01:39 2008 +0200 + + ppc4xx: Add bootcount limit handling for APC405 boards + + Signed-off-by: Matthias Fuchs + +commit 1de6b28be5d107ae90ad7a8a43653c49966e8afe +Author: Bartlomiej Sieka +Date: Fri Apr 25 12:10:09 2008 +0200 + + Use watchdog-aware functions when calculating hashes of images + + Signed-off-by: Bartlomiej Sieka + +commit d00ce09040d3100e2c7998ef56db62c2d20d9ee3 +Author: Wolfgang Denk +Date: Fri Apr 25 12:44:08 2008 +0200 + + USB: fix more GCC 4.2.x aliasing warnings + + Signed-off-by: Wolfgang Denk + Acked-by: Markus Klotzbuecher + +commit aff4f86448f6586930f0a3be7fc4b0ddcf450980 +Author: Wolfgang Denk +Date: Fri Apr 25 12:41:53 2008 +0200 + + lib_generic/crc32.c: add missing #include + + Signed-off-by: Wolfgang Denk + +commit 03ccdbcd5602610cea4bd0db7e48e1ef881a51ef +Author: Wolfgang Denk +Date: Fri Apr 25 11:52:21 2008 +0200 + + lib_generic/crc32.c: fix compile problem + + Signed-off-by: Wolfgang Denk + +commit 24bfedbd0be4dcaa94861407820d6a70fea7e03b +Author: Stefan Roese +Date: Tue Apr 22 12:20:32 2008 +0200 + + ppc4xx: Pass PCIe root-complex/endpoint configuration to Linux via the fdt + + The PCIe root-complex/endpoint setup as configured via the "pcie_mode" + environment variable will now get passed to the Linux kernel by setting + the device_type property of the PCIe device tree node. For normal root- + complex configuration it will keep its defaults value of "pci" and for + endpoint configuration it will get changed to "pci-endpoint". + + Signed-off-by: Stefan Roese + +commit eb0615bf600d2caf5aa2958f47f5ba364c52d5e7 +Author: Yuri Tikhonov +Date: Thu Apr 24 10:30:53 2008 +0200 + + lwmon5: watchdog POST fix + + Use the GPT0_MASKx registers as the temporary storage for watch-dog + timer POST test instead of GPT0_COMPx. The latter + (GPT0_COMP1..GPT0_COMP5) are used for the log-buffer header. + + Signed-off-by: Sergei Poselenov + Signed-off-by: Yuri Tikhonov + +commit 78e488298824bc150b5f3ebf7958cd71fa2af1b9 +Author: Kim Phillips +Date: Mon Apr 21 18:10:14 2008 -0500 + + lib_ppc: Revert "Make MPC83xx one step closer to full relocation." + + This reverts commit 70431e8a7393b6b793f77957f95b999fc9a269b8 which has + proven problematic getting right from the start at least on 83xx and + 4xx. + + Signed-off-by: Kim Phillips + +commit a99715b8ebfc500f3f40e01b36b64d473938443d +Author: Detlev Zundel +Date: Fri Apr 18 14:50:01 2008 +0200 + + Realining some header definitions. + + Signed-off-by: Detlev Zundel + +commit 4acbc6c7f993cae409c424615415a3e76820f13d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Apr 24 07:57:16 2008 +0200 + + NE2000: coding style cleanup + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b4aff1ffaf7120032c653357c007faa14f74d29d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 23 00:11:47 2008 +0900 + + qemu-mips.h: Add CFI support + + CONFIG_ENV_OVERWRITE is also added. + + This patch is originally created by Jean-Christophe PLAGNIOL-VILLARD. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit 4a1f11b45a82908e5b0df602d703082413a6b7ed +Author: Shinya Kuribayashi +Date: Tue Apr 22 22:47:27 2008 +0900 + + doc/README.mips: Add MIPS notes + + Signed-off-by: Shinya Kuribayashi + +commit 215b01bba8bc662d35f72b084700b192d367dfb4 +Author: Bartlomiej Sieka +Date: Tue Apr 22 12:27:56 2008 +0200 + + Add support for calculating hashes with watchdog triggering + + Implement watchodg-aware variants of hash calculation functions: + - crc32_wd() + - md5_wd() + - sha1_csum_wd() + The above functions calculate the hash of the input buffer in chunks, + triggering the watchdog after processing each chunk. The chunk size + is given as a function call parameter. + + Signed-off-by: Bartlomiej Sieka + +commit 8875e3abab986df930167ce5c1ac4f95dcacc81c +Author: Shinya Kuribayashi +Date: Wed Apr 23 11:02:12 2008 +0900 + + qemu-mips: Cleanup whitespace, indentation, etc. + + No functional change. + + This patch was originally submitted by Jean-Christophe PLAGNIOL-VILLARD. + Then I re-created from scratch, and changed more lines than the original. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Shinya Kuribayashi + +commit 386563197e3a50b0e97ad9aae87f57d9aab909ab +Author: Vlad Lungu +Date: Wed Oct 10 23:02:09 2007 +0300 + + Fixed pcnet io_base + + Bus and phys address are not always the same + + Signed-off-by: Vlad Lungu + +commit 11ea26fd1cb63c91403fe04a6eea975cd418603f +Author: Wolfgang Denk +Date: Thu Apr 24 23:44:26 2008 +0200 + + drivers/net/pcnet.c: Coding Style cleanup. + + Signed-off-by: Wolfgang Denk + +commit 899ef7b84578b7cafadfd78488c2fd2aac93f636 +Author: Vlad Lungu +Date: Wed Oct 10 23:04:23 2007 +0300 + + Added Am79C970A chip id to pcnet + + Signed-off-by: Vlad Lungu + +commit 17c9de6bb33f676eb776dcbfc46fc1b14c3871a5 +Author: Magnus Lilja +Date: Sun Apr 20 10:35:03 2008 +0200 + + i.MX31: Fix architecture numbers for ADS and Litekit boards + + Correct the Linux architecture number for i.MX31 Litekit and ADS boards. + + Signed-off-by: Magnus Lilja + +commit e7ae84d6c7288790e88639f57cb60daf89c11369 +Author: Magnus Lilja +Date: Sun Apr 20 10:36:36 2008 +0200 + + i.MX31: Use symbolic names for Litekit membases. + + Use symbolic names instead of hard coded addresses for Litekit membases. + + Signed-off-by: Magnus Lilja + +commit 2ef1d9b6030d02f576b1bcd9fec948e602522012 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Apr 19 17:59:20 2008 +0200 + + Fix show_boot_progress prototype + + in commit fad634071 "make show_boot_progress () weak." + show_boot_progress is supposed to be declared as weak but declared as + inline instead. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit edbed247a14d70b94958010f736621212285de91 +Author: Bartlomiej Sieka +Date: Fri Apr 18 12:39:23 2008 +0200 + + Memory footprint optimizations + + As suggested by Wolfgang Denk: + - image printing functions: + - remove wrappers + - remove indentation prefix from functions' signatures + - merge getenv_verify and getenv_autostart into one parametrized function + + Signed-off-by: Bartlomiej Sieka + +commit 0a0b606faaec4afb3f750b09aa4df1e40a39dcb8 +Author: Guennadi Liakhovetski +Date: Tue Apr 15 13:33:11 2008 +0200 + + MX31ADS environment variable update, spi and rtc support + + Update MX31ADS default environment to better match the flash layout and + the memory map, support SPI and RTC. + + Signed-off-by: Guennadi Liakhovetski + +commit 022f12163595b9a55380c6d77c3119b93d6a9a4b +Author: Kumar Gala +Date: Mon Apr 21 09:28:36 2008 -0500 + + 85xx: Round up frequency calculations to get reasonable output + + eg. because of rounding error we can get 799Mhz instead of 800Mhz. + + Introduced DIV_ROUND_UP and roundup taken from linux kernel. + + Signed-off-by: Dejan Minic + Signed-off-by: Srikanth Srinivasan + Signed-off-by: Kumar Gala + Acked-by: Andy Fleming + +commit 876b8f978982216ab4a22dcd9efddfcd9b0e04e6 +Author: Kumar Gala +Date: Wed Apr 23 16:58:04 2008 -0500 + + fsl_pci: Only modify registers if we have them + + pme_msg_det exists only on PCIe controllers only set it if we are a "bridge". + + Signed-off-by: Kumar Gala + +commit 83fe32334337def160b302aa9d152d808bfcc68e +Author: Markus Klotzbücher +Date: Wed Apr 23 10:57:33 2008 +0200 + + USB: remove a cpu bug workaround for an unsupported architecture. + + Signed-off-by: Markus Klotzbuecher + +commit f957576cb53e6cfab412709cfc8db1afd39d21c3 +Author: Markus Klotzbücher +Date: Wed Apr 23 10:53:23 2008 +0200 + + USB: fix those pesky aliasing warnings issued by gcc-4.2 + + Signed-off-by: Markus Klotzbuecher + Signed-off-by: Detlev Zundel + +commit 89cdab788f3716b335fefb60b836ebcf975aceab +Author: Mike Frysinger +Date: Mon Mar 31 11:02:01 2008 -0400 + + crc32: use uint32_t rather than unsigned long + + The envcrc.c does sizeof(unsigned long) when calculating the crc, but + this is done with the build toolchain instead of the target tool + chain, so if the build is a 64bit system but the target is 32bits, + the size will obviously be wrong. This converts all unsigned long + stuff related to crc32 to uint32_t types. Compile tested only: output + of ./tools/envcrc when run on a 32bit build system matches that of a + 64bit build system. + + Signed-off-by: Mike Frysinger + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 80c40b765b3642ddb9f3392b7898715aab44a29c +Author: Dirk Behme +Date: Wed Mar 26 09:53:29 2008 +0100 + + ARM: Davinci: Fix DM644x timer overflow handling and cleanup + + Fix ARM based DaVinci DM644x timer overflow handling and cleanup timer code. + + Changes: + + - Remove *_masked() functions as noted by Wolfgang + + - Adapt register naming to recent TI spec (sprue26, March 2007) + + - Fix reset_timer() handling + + - As reported by Pieter [1] the overflow fix introduced a delay of factor 16 (e.g 2 seconds became 32). While the overflow fix is basically okay, it missed to divide udelay by 16, too. Fix this. + + [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 + + - Remove software division of timer count value (DIV(x) macro) and do it in hardware (TIM_CLK_DIV). + + Many thanks to Troy Kisky and Pieter Voorthuijsen for the hints & testing! + + Patch is compile tested with davinci_dvevm & sonata & schmoogie configuration and tested by Pieter on DaVinci EVM hardware. + + Signed-off-by: Dirk Behme + Acked-by: Pieter Voorthuijsen + +commit a6e6fc610e39dec41b79680413d4ed38145bd3c8 +Author: Sergei Poselenov +Date: Wed Apr 9 16:09:41 2008 +0200 + + Added watchdog triggering calls in the "mtest" test function. + + Signed-off-by: Sergei Poselenov + +commit d32a874b9b4c1e949ee38be7790f6bf6d6143451 +Author: Yuri Tikhonov +Date: Sun Apr 6 19:19:14 2008 +0200 + + lwmon5 watchdog: limit trigger rate + + Limit the rate of h/w watch-dog triggering on the LWMON5 board by + the CONFIG_WD_MAX_RATE value. + + Note that an earlier version of this patch which used microseconds + instead of ticks dis not work. The problem was that we used + usec2ticks() to convert microseconds into ticks. usec2ticks() uses + get_tbclk(), which in turn calls get_sys_info(). It turns out that + this function does a lot of prolonged operations (like divisions) + which take too much time so we do not trigger the watchdog in time, + and it resets the system. + + Signed-off-by: Yuri Tikhonov + +commit 2d2b994a30bb100774dc747ae9865b7f95285a88 +Author: Yuri Tikhonov +Date: Mon Mar 31 10:51:37 2008 +0200 + + POST: move CONFIG_POST to Makefiles + + Introduce the new logical option CONFIG_HAS_POST which is set when the + platform has CONFIG_POST set. Use CONFIG_HAS_POST in the post/ Makefiles + to determine should the POST libs be compiled for the selected target + platform, or not. + + To avoid breaking u-boot linking process, the empty post/libpost.a file is + created for platforms which do not have POSTs. + + Signed-off-by: Yuri Tikhonov + Signed-off-by: Wolfgang Denk + +commit 0a51e9248e2d27e0a02ef1e740c576ce90a39ee1 +Author: Yuri Tikhonov +Date: Mon Mar 31 10:49:34 2008 +0200 + + POST: preparations for moving CONFIG_POST to Makefiles + + Remove CONFIG_POST ifdefs from the post/ source files. + + Signed-off-by: Yuri Tikhonov + Signed-off-by: Wolfgang Denk + +commit 5d40d4430d9ebc8434c6f0798594836e1efa7a1e +Author: Stefan Roese +Date: Tue Apr 22 14:14:20 2008 +0200 + + ppc4xx: Fix Canyonlands and Glacier default environment for fdt usage + + This patch fixes the Canyonlands and Glacier default environment to better + fit to the arch/powerpc device-tree kernels. The variables dealing with + arch/ppc booting are removed, since these boards are supported only in + arch/powerpc. Glacier uses the same config file as Canyonlands. + + Also, the Glacier now uses non-FPU rootpath, since 460GT has no FPU. + + Signed-off-by: Stefan Roese + +commit b789cb4a4c0c1deff82053539cfe29a9c6e23f8b +Author: Stefan Roese +Date: Tue Apr 22 14:06:42 2008 +0200 + + ppc4xx: Small coding style cleanup for the latest esd patches + + Signed-off-by: Stefan Roese + +commit 79941d63bc03aed8c48d7602f18217cc200ee931 +Author: Matthias Fuchs +Date: Mon Apr 21 18:01:07 2008 +0200 + + ppc4xx: Update CPU strapping for PMC440 boards + + This patch removes the temporary 'test' strapping option + of the sbe command. The '667' strapping option now uses + a PLB/PCI divider of 3. + + Signed-off-by: Matthias Fuchs + +commit f00cf3193a6635355b121e90debb2f54e777e7da +Author: Matthias Fuchs +Date: Mon Apr 21 14:42:21 2008 +0200 + + ppc4xx: Remove unused APC405 strataflash driver + + The APC405 board support has been migrated to use the common + CFI flash driver. + + Signed-off-by: Matthias Fuchs + +commit 1c686676a86473bbd92151f0544e109413f6ed06 +Author: Matthias Fuchs +Date: Mon Apr 21 14:42:17 2008 +0200 + + ppc4xx: Update APC405 configuration + + - enable esd's auto_update mechanism + - support alternative flash layout on rev. 1.8 boards + - update default environment + - use common CFI flash driver + - coding style cleanup + + Signed-off-by: Matthias Fuchs + +commit 0b9872515a521bf7866dc24b85ddce708e60d702 +Author: Matthias Fuchs +Date: Mon Apr 21 14:42:11 2008 +0200 + + ppc4xx: Update APC405 board support + + - enable esd's auto_update mechanism + - fix LCD support on latest hardware revision (uses other LCD controller) + - support alternative flash layout on rev. 1.8 boards + - coding style cleanup + + Signed-off-by: Matthias Fuchs + +commit 83975d02e225e231960784972e7820a8b303756b +Author: Matthias Fuchs +Date: Mon Apr 21 14:42:06 2008 +0200 + + ppc4xx: update esd's common auto_update code for 405 boards + + - Coding style cleanup (long lines) + - improve handling of protected flash regions + - remove dead code + + Signed-off-by: Matthias Fuchs + +commit b9233fe5d59cb25d975071616bd1035d6f4c2285 +Author: Matthias Fuchs +Date: Mon Apr 21 14:41:59 2008 +0200 + + ppc4xx: Update esd's common LCD code for 405 boards + + - Coding style cleanup (long lines) + - Add s1d13505 support + - Make some functions return a result code instead of void + + Signed-off-by: Matthias Fuchs + +commit dea68189424c3f1242427a8146a3861bf093173c +Author: Matthias Fuchs +Date: Mon Apr 21 11:36:55 2008 +0200 + + ppc4xx: Update FPGA image for APC405 boards + + Signed-off-by: Matthias Fuchs + +commit 2a05b152924acfcec3b037693329e517e6d3578f +Author: Matthias Fuchs +Date: Mon Apr 21 11:36:08 2008 +0200 + + ppc4xx: Update bootlogo for APC405 boards + + Signed-off-by: Matthias Fuchs + +commit 8deafdc6ad368368cf03b58cab4bd39f45d64b5c +Author: Stefan Roese +Date: Fri Apr 18 16:41:31 2008 +0200 + + ppc4xx: Add dcache_enable() for 440 + + dcache_enable() was missing for 440 and the patch + 017e9b7925f74878d0e9475388cca9bda5ef9482 ["allow ports to override bootelf + "] behavior uses this function. + + Note: Currently the cache handling functions like + d/icache_disable/enable() are NOP's on 440. This may be changed in the + future. + + Signed-off-by: Stefan Roese + +commit a49e0d177a0749614b316ec847fb623f09c82c07 +Author: Matthias Fuchs +Date: Mon Apr 21 11:19:04 2008 +0200 + + video: Add missing free for logo memory + + This patch adds two missing free()s. + + Signed-off-by: Matthias Fuchs + +commit 84c01d3a05ae3aca5f7c0c13a31ca72ba1199a42 +Author: Troy Kisky +Date: Mon Sep 24 16:41:43 2007 -0700 + + PATCH - Fix oob data copied into supplied buffer + + This patch correctly sets the oobavail variable + and fixes a bug where the oob data was not valid when + there where multiple groups in oobfree. + + First segment fixes a typo + Second segment fixes a bug where oob data may be copied incorrectly. + Third segment adds an error message when exiting due to write protect. + Forth segment fixes a bug where oobavail may be set incorrectly. + + Signed-off-by: Troy Kisky + +commit e1d09680f64b452adde89ed9fe28a77c56bedc9a +Author: Matthias Fuchs +Date: Fri Apr 18 17:24:32 2008 +0200 + + ppc4xx: Fix sys_get_info() for 405GP(r) + + This patch assigns the correct EBC clock for 405GP(r) CPUs + to PPC4xx_SYS_INFO structure. Without this patch U-Boot + uses an uninitialized EBC clock in its startup message. + + Signed-off-by: Matthias Fuchs + +commit dc7746d86d2a3dfe01ab9a70cb427f92adc303c7 +Author: Wolfgang Denk +Date: Sun Apr 20 15:39:38 2008 -0700 + + Makefile: remove nand_spl/System.map when cleaning up. + +commit d9a42c0ace4d4f9cb061d62a7265d1780f90447b +Author: Wolfgang Denk +Date: Sun Apr 20 15:35:52 2008 -0700 + + MAKEALL: sort entries / lists. + + Signed-off-by: Wolfgang Denk + +commit 0878af169b181868a105b5c33f3a6423e2c9fd60 +Author: Kumar Gala +Date: Fri Apr 18 11:29:01 2008 -0500 + + 85xx: Fix size of cpu-release-addr property + + The cpu-release-addr is defined as always being a 64-bit quanity regardless + if we are running on a 32-bit or 64-bit machine. + +commit 88353a985109562a639b2f8a0c90d77011bfe374 +Author: Timur Tabi +Date: Fri Apr 4 11:15:58 2008 -0500 + + Fix calculation of I2C clock for some 85xx chips + + Some 85xx chips use CCB as the base clock for the I2C. Some use CCB/2, and + some use CCB/3. There is no pattern that can be used to determine which + chips use which frequency, so the only way to determine is to look up the + actual SOC designation and use the right value for that SOC. + + Update immap_85xx.h to include the GUTS PORDEVSR2 register. + + Signed-off-by: Timur Tabi + +commit 1e01477aeaf409ddb97e2633aab9cf8c9c60612e +Author: Wolfgang Denk +Date: Fri Apr 18 11:44:27 2008 -0700 + + Fix build breakage casued by commit c0559be371b2 + + Change env_get_char from a global function ptr to a function. + + Signed-off-by: Wolfgang Denk + +commit 268a804d7e2fa07b64211fd2f9a9615db4539f23 +Author: Wolfgang Denk +Date: Fri Apr 18 10:53:41 2008 -0700 + + Coding Style cleanup, update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit 92bad20ad74b70adf3839df9a0a47cce000ac3d7 +Author: Mike Frysinger +Date: Tue Apr 8 14:00:57 2008 -0400 + + Add support for u-boot in svn and localversion-* files + + Signed-off-by: Mike Frysinger + +commit d23ff6827decf121461fbc5622612fd7effe207e +Author: Guennadi Liakhovetski +Date: Thu Apr 3 17:04:22 2008 +0200 + + MX31ADS network and flash updates + + This patch allows U-Boot to use buffered writes to the Spansion NOR + flash installed on this board, and eliminates long delays in network + transfers after the board startup. + + Also modify flash layout to embed main and redundant environment + blocks in the U-Boot image. + + Signed-off-by: Guennadi Liakhovetski + +commit b5dc9b304d289831f291843ff88a45cbdf1a6290 +Author: Guennadi Liakhovetski +Date: Mon Apr 14 10:53:12 2008 +0200 + + Support for the MX31ADS evaluation board from Freescale + + This patch adds support for the MX31ADS evaluation board from Freescale, + initialization code is copied from RedBoot sources, also provided by + Freescale. + + Signed-off-by: Guennadi Liakhovetski + +commit 499e7831e1baaac6bfb959213f1950c216fbc5ba +Author: Stefan Roese +Date: Tue Apr 8 10:33:29 2008 +0200 + + ppc4xx: Change Canyonlands to support booting from 2k page NAND devices + + Signed-off-by: Stefan Roese + +commit 5e182dce04d68cc94407a1b1fa09307f2bb96719 +Author: Stefan Roese +Date: Tue Apr 8 10:33:28 2008 +0200 + + ppc4xx: Adjust Canyonlands fixed DDR2 setup (NAND booting) to 512MB SODIMM + + Signed-off-by: Stefan Roese + +commit fe7c0db6b2a9004f96c2a2d4fff2849e19c2d825 +Author: Stefan Roese +Date: Tue Apr 8 10:33:27 2008 +0200 + + ppc4xx: Add Glacier NAND booting target + + Signed-off-by: Stefan Roese + +commit 46f373838e384a4c23d13581b1dfa5acb66b5810 +Author: Stefan Roese +Date: Tue Apr 8 10:31:00 2008 +0200 + + nand_spl: Update nand_spl to support 2k page size NAND devices + + This patch adds support for booting from 2k page sized NAND device + (e.g. Micron 29F2G08AAC). + + Tested on AMCC Canyonlands. + + Signed-off-by: Stefan Roese + +commit 5e3dca577b7c1bf58bd2b48449b18b7e7dcd8e04 +Author: Anatolij Gustschin +Date: Thu Apr 17 18:18:00 2008 +0200 + + Fix crash on sequoia in ppc_4xx_eth_init + + Currently U-Boot crashes in ppc_4xx_eth_init on sequoia + with cache enabled (TLB Parity exeption). This patch + fixes the problem. + + Signed-off-by: Anatolij Gustschin + +commit accf7355767dc7f6b85d88bb1c75c9d95e84ba5b +Author: Anatolij Gustschin +Date: Thu Apr 17 18:15:27 2008 +0200 + + ppc4xx: Fix crash on sequoia with cache enabled + + Currently U-Boot crashes on sequoia board in CPU POST if + cache is enabled (CONFIG_4xx_DCACHE defined). The cache + won't be disabled by change_tlb before CPU POST because + there is an insufficient adress range check since + CFG_MEM_TOP_HIDE was introduced. This patch tries to fix + this problem. + + Signed-off-by: Anatolij Gustschin + +commit 43c509254fab375c49936498da944658117ed07c +Author: Shinya Kuribayashi +Date: Thu Apr 17 23:35:13 2008 +0900 + + Use jr as register jump instruction + + Current assembler codes are inconsistent in the way of register jump + instruction usage; some use jr, some use j. Of course GNU as allows both + usages, but as can be expected from `Jump Register' the mnemonic `jr' is + more intuitive than `j'. For example, Linux doesn't have `j ' usage + at all. + + Signed-off-by: Shinya Kuribayashi + +commit 7ce63709828d37b08866e537339a169bd0db2bd3 +Author: Guennadi Liakhovetski +Date: Tue Apr 15 14:15:30 2008 +0200 + + RTC driver for MC13783 + + MC13783 is a multifunction IS with an SPI interface to the host. This + driver handles the RTC controller in this chip. + + Signed-off-by: Guennadi Liakhovetski + +commit 38254f45b0b412332726c90d3184ad47479fcffb +Author: Guennadi Liakhovetski +Date: Tue Apr 15 14:14:25 2008 +0200 + + New i.MX31 SPI driver + + This is an SPI driver for i.MX and MXC based SoCs from Freescale. So far + only implemented and tested on i.MX31, can with a modified register layout + and definitions be used for i.MX27, I think, MXC CPUs have similar SPI + controllers too. + + Signed-off-by: Guennadi Liakhovetski + +commit 7064122c2eef92f02a03ef37a1a1c07e70cd4e38 +Author: Magnus Lilja +Date: Tue Apr 15 19:09:10 2008 +0200 + + Fix name of i.MX31 boards in config file header + + Correct the name of the i.MX31 Litekit and phyCORE boards in config files. + + Signed-off-by: Magnus Lilja + +commit a49864593e083a5d0779fb9ca98e5a0f2053183d +Author: Mike Frysinger +Date: Sun Apr 13 19:42:19 2008 -0400 + + allow ports to override go behavior + + Split the arch-specific logic out of the common go code and into a dedicated + weak function called do_go_exec() that lives in cpu directories. This will + need review from i386/nios people to make sure I didn't break them. + +commit 017e9b7925f74878d0e9475388cca9bda5ef9482 +Author: Mike Frysinger +Date: Sun Apr 13 19:42:18 2008 -0400 + + allow ports to override bootelf behavior + + Change the bootelf setup function into a dedicated weak function called + do_bootelf_exec. This way ports can control the behavior however they + like before/after calling the ELF entry point. + +commit a4b46ed6b3502335c3f3a5d672abe0bcb44f20b7 +Author: Ulf Samuelsson +Date: Sat Apr 12 20:56:03 2008 +0200 + + Reorder ARM boards in Makefile + + Rearrange ARM boards in Makefile so that ARM926EJ-S boards + are no longer under ARM92xT header. + + Signed-off-by: Ulf Samuelsson + Ack-By Jean-Christophe PLAGNIOL-VILLARD + +commit c3a60cb3bd67e120fc99b6ba88d9295c3c07f688 +Author: Ulf Samuelsson +Date: Sat Apr 12 20:29:44 2008 +0200 + + Clean up dataflash partitioning + + This patch removes the board dependent parts from + "drivers/mtd/dataflash.c". + Each board relying on this, will have the appropriate + code in a new file, "partition.c" in the board directory. + board Makefiles updated to use the file. + + The dataflash partitions are aligned on sector/page boundaries. + + The CONFIG_NEW_DF_PARTITION was used to create named partitions + This is now the default operation, and the CONFIG variable is removed. + + Signed-off-by: Ulf Samuelsson + +commit 51ecde946fec511a16346e498204ca10ad71080d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Apr 12 14:08:45 2008 +0200 + + gitignore: udpate stgit generated and .patch file + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 66e39818e95f51ee1c1dd2094407a8929543fa6d +Author: Wolfgang Denk +Date: Fri Apr 18 00:15:36 2008 -0700 + + Get rid of redundant copy of renamed header file. + + Signed-off-by: Wolfgang Denk + +commit c3aafd8cf814e33a77de81c2f22b8c772216a3cc +Author: Vlad Lungu +Date: Fri Apr 11 21:20:14 2008 +0300 + + Fix dependency generation for older gcc versions + + With gcc 3.3.3 at least, compilation fails with + + Generating include/autoconf.mk + gcc: compilation of header file requested + make: *** [include/autoconf.mk] Error 1 + + since commit 16fe77752eee099b9fb61ed73460e51cc94b37ba. + + Signed-off-by: Vlad Lungu + +commit cb1c4896905ab22fcd982e6a8a539f0031942e71 +Author: Marian Balakowicz +Date: Fri Apr 11 11:07:49 2008 +0200 + + Restore the ability to continue booting after legacy image overwrite + + Before new uImage code was merged, bootm code allowed for the kernel image to + get overwritten during decompresion. new uImage introduced a check for image + overwrites and refused to boot the image that got overwritten. This patch + restores the old behavior. It also adds a warning when the image overwriten is + a multi-image file, because in such case accessing componentes other than the + first one will fail. + + Signed-off-by: Marian Balakowicz + +commit de2b3216e6b4f3b2fe93759c05b17504f9dfe036 +Author: Marian Balakowicz +Date: Fri Apr 11 11:07:43 2008 +0200 + + ppc: Fix ftd_blob variable init when processing raw blob + + Set fdt_blob variable before its value is printed out. + + Signed-off-by: Marian Balakowicz + +commit 3d36be030043cd841a2551d00a395135e363a64b +Author: Jason Wessel +Date: Thu Apr 10 14:30:16 2008 -0500 + + Remove all the search paths from the .lds files. + + The cross compiler is responsible for providing the correct libraries + and the logic to find the linking libraries. + + Signed-off-by: Jason Wessel + +commit 7d721e34ae6be7d7db63e8d060a246278bb7ae58 +Author: Bartlomiej Sieka +Date: Mon Apr 14 15:44:16 2008 +0200 + + Boot-related documentation update + + - document 'bootm_low' and 'bootm_size' environment variables + - update inaccurate CFG_BOOTMAPSZ entry + + Signed-off-by: Bartlomiej Sieka + +commit a6f0bd9f2b1971e2a61ac0fd1fc2c96cb7a4b67a +Author: Guennadi Liakhovetski +Date: Wed Apr 9 17:34:08 2008 +0200 + + Fix regression introduced by a typo in "Tidied other cpu/arm920t/start.S code" + + Restore logic reverted by commit + + commit 80767a6cead9990d9e77e62be947843c2c72f469 + Author: Peter Pearse + Date: Wed Sep 5 16:04:41 2007 +0100 + + Changed API name to coloured_led.h + Removed code using deprecated ifdef CONFIG_BOOTBINFUNC + Tidied other cpu/arm920t/start.S code + + Signed-off-by: Guennadi Liakhovetski + +commit e25cb8d3f4fcc265a9cdf8e9d577b59bdb64bbaf +Author: Mike Frysinger +Date: Tue Apr 8 10:24:24 2008 -0400 + + Remove conflicting NAND ID + + There are two NAND entries with ID 0xDC and this obviously causes problems. + In the kernel, they punted the first entry, so we should do the same. + + See this upstream e-mail for more info: + http://lists.infradead.org/pipermail/linux-mtd/2007-July/018795.html + + Signed-off-by: Michael Hennerich + Signed-off-by: Mike Frysinger + +commit 188e94c370621708d13547d58dbc6ed3c5602aa8 +Author: Shinya Kuribayashi +Date: Tue Apr 8 16:20:35 2008 +0900 + + cpu/mips/cpu.c: Fix flush_cache bug + + Cache operations have to take line address (addr), not start_addr. + I noticed this bug when debugging ping failure. + + Signed-off-by: Shinya Kuribayashi + +commit 8f2a68a07c058fca1d413e54f71c2e7e78a74ed4 +Author: Martin Krause +Date: Thu Apr 3 14:29:01 2008 +0200 + + TQM5200: fix default IDE reset level + + Before the first call of ide_reset(), the level of the IDE reset + signal on the TQM5200 is low (reset asserted). This patch sets the + default value to high (reset not asserted). + + Currently this patch fixes no real problem, but it is cleaner to + assert the reset signal only on demand, and not permanently. + + Signed-off-by: Martin Krause + +commit c61e033d6e8abb7b4060ee36060961e1399f6079 +Author: Detlev Zundel +Date: Thu Apr 3 14:18:48 2008 +0200 + + mgcoge, mgsuv: realign CONFIG_EXTRA_ENV_SETTING + + Signed-off-by: Detlev Zundel + +commit f308572e19eb7fe63aa3d41f214cde4c23c9800f +Author: Detlev Zundel +Date: Thu Apr 3 14:18:47 2008 +0200 + + mgcoge, mgsuv: rename 'addcon' to 'addcons' + + The latter name with 13 users is already established, so we will use + that. + + Signed-off-by: Detlev Zundel + +commit e175eacc87c3a9e4dad0799fee0e95732520afc7 +Author: Martin Krause +Date: Thu Apr 3 13:37:56 2008 +0200 + + IDE: fix bug in reset sequence + + According to the ata (ata5) specification the RESET- signal + shall be asserted for at least 25 us. Without this patch, + the RESET- signal is asserted on some boards for only < 1 us + (e. g. on the TQM5200). This patch adds a general delay of + 25 us to the RESET- signal. + + Without this patch a Platinum 4 GiB CF card is not recognised + properly on boards with a TQM5200 (STK52xx, TB5200). + + Signed-off-by: Martin Krause + +commit 813bea96a960916c72b4a3a7df840151529c26ce +Author: Sascha Laue +Date: Thu Apr 3 14:43:11 2008 +0200 + + lwmon5: disable CONFIG_ZERO_BOOTDELAY + + Signed-off-by: Sascha Laue + +commit 53eec6f1d25932e76d63ccb14082792b0b96bf41 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 2 08:03:58 2008 +0200 + + ds174x: Fix warning on return in rtc_get and rtc_set functions + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit a253b38bf50c85227c33ca0febc870ee49d1588e +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 2 08:03:57 2008 +0200 + + cmd_log.c: Fix assignment differ in signedness + + In function 'logbuff_init_ptrs': + cmd_log.c:79: warning: pointer targets in assignment differ in signedness + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6c0e9a8f1cc090fbfbc6f86b6b4fd17a1628f3df +Author: Gururaja Hebbar K R +Date: Wed Apr 2 11:04:43 2008 +0530 + + Remove duplicate #undef SHOW_INFO in drivers/usb/usb_ohci.c + + Signed-off-by: gururaja hebbar + +commit 478d5ec9ae3cbcc6040241d2d73dbbc61fe9b49d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Apr 1 14:07:10 2008 +0200 + + s3c4510b_eth: fix 'packed' attribute ignored for fields of MACFrame + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit c08fb3ea36d19b1640b7906264581e9105534399 +Author: Guennadi Liakhovetski +Date: Tue Apr 15 10:24:14 2008 +0200 + + Additional PCI IDs for IDE and network controllers + + These PCI IDs are required by the Linkstation platforms. + + Signed-off-by: Guennadi Liakhovetski + +commit c0559be371b2a64b1a817088c3308688e2182f93 +Author: Joakim Tjernlund +Date: Mon Apr 14 23:01:50 2008 +0200 + + Change env_get_char from a global function ptr to a function. + + This avoids an early global data reference. + + Signed-off-by: Joakim Tjernlund + +commit 3e0f331c05d72f140715c1e9fca991927e44d422 +Author: Guennadi Liakhovetski +Date: Tue Apr 29 12:35:08 2008 +0000 + + Clean up smsc911x driver + + Replace direct register address derefencing with accessor functions. + Restrict explicitly 32-bit bus-width, extend affected configurations + respectively. + + Signed-off-by: Guennadi Liakhovetski + Signed-off-by: Ben Warren + +commit de1b686b763aa8b87a86f6748ce9169e7fc0e4cd +Author: Sascha Hauer +Date: Tue Apr 15 00:08:20 2008 -0400 + + This patch adds a driver for the following smsc network controllers: + LAN9115 + LAN9116 + LAN9117 + LAN9215 + LAN9216 + LAN9217 + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + Signed-off-by: Ben Warren + +commit 3dfd4aab929cccddb63d9ea509967861e1333b52 +Author: Sascha Laue +Date: Tue Apr 1 15:13:03 2008 +0200 + + Fix watchdog POST for lwmon5 + + If the hardware watchdog detects a voltage error, the watchdog sets + GPIO62 to low. The watchdog POST has to detect this low level. + + Signed-off-by: Sascha Laue + +commit 24b448448a917e52806f82660a5c9d47608894fb +Author: Dave Liu +Date: Tue Apr 1 15:22:11 2008 +0800 + + ata: update the libata.h from ata.h of linux kernel + + Current libata.h of u-boot is out of sync from linux kernel, + this patch make it be consistent with linux kernel. + + Signed-off-by: Dave Liu + Signed-off-by: Tor Krill + +commit f8f9dc98883f66f59eb0601da65808e6b139c87c +Author: Kumar Gala +Date: Mon Mar 31 11:59:27 2008 -0500 + + Allow use of ARCH=powerpc when building + + The linux kernel is now mostly ARCH=powerpc, so to make life easier + allow use to use ARCH=powerpc and convert it to ARCH=ppc. + + Signed-off-by: Kumar Gala + +commit 8af657d2c6d1ca4f2f76973531394d4578ba2ef0 +Author: Kyungmin Park +Date: Mon Mar 31 10:40:54 2008 +0900 + + Add apollon board MAINTAINERS entry + + Signed-off-by: Kyungmin Park + +commit 77e475cc0ed1832160017d364be32a0be9ff02a9 +Author: Kyungmin Park +Date: Mon Mar 31 10:40:36 2008 +0900 + + Fix OneNAND read + + It should access with 16-bit instead of 8-bit + + Now it uses the generic memcpy with 8-bit access. It means it reads wrong data from OneNAND. + + Signed-off-by: Kyungmin Park + +commit a9da2b41079d230db3a5641625311983f85ce1fb +Author: Kyungmin Park +Date: Mon Mar 31 10:40:19 2008 +0900 + + Fix OneNAND erase command + + It mis-calculates the block address. + Also fix DECLARE_GLOBAL_DATA_PTR in env_onenand. + + Signed-off-by: Kyungmin Park + +commit 61525f2ffa156665a66908fda47dbf29d65ea579 +Author: Guennadi Liakhovetski +Date: Mon Mar 31 01:32:15 2008 +0200 + + Support for LinkStation / KuroBox HD and HG PPC models + + This patch is based on the port by Mihai Georgian (see linkstation.c for + Copyright information) and implements support for LinkStation / KuroBox HD + and HG PPC models from Buffalo Technology, whereby HD is deactivated at + the moment, pending network driver fixing. + + Notice to users: this is pretty much a barebone port. Support for network + on HG models is already in the U-Boot mainline, but you might also want + patches to switch fan / phy modes depending on the negotiated ethernet + parameters. This patch also doesn't support console switching, booting EM + mode, Buffalo specific ext2 magic number. So, if you want to use any of + those, you need additional patches. Otherwise this patche provides a fully + functional u-boot with a network console on your system. + + Signed-off-by: Guennadi Liakhovetski + +commit 0f3ba7e9783f352318f197a3148f6d5cc3d75bea +Author: TsiChung Liew +Date: Sun Mar 30 01:22:13 2008 -0500 + + Add CONFIG_MII_INIT support to related boards + + Replace CONFIG_8xx and CONFIG_MCF532x to CONFIG_MII_INIT in + cmd_init.c. Add CONFIG_MII_INIT to board configuration files + that use mii_init() in cmd_init.c. + + Signed-off-by: TsiChung Liew + Acked-by: Ben Warren + +commit f33fca22e76f20e4e4793810ca7a06a4805a6cf4 +Author: TsiChung Liew +Date: Sun Mar 30 01:19:06 2008 -0500 + + Update CONFIG_PCIAUTO_SKIP_HOST_BRIDGE to related boards + + Remove test for CONFIG_MPC5200 in drivers/pci/pci_auto.c and define + CONFIG_PCIAUTO_SKIP_HOST_BRIDGE in related board configuration files. + + Signed-off-by: TsiChung Liew + +commit e99ccb488181d012248c6be30b2093e950319fc5 +Author: Kumar Gala +Date: Thu Mar 27 11:46:38 2008 -0500 + + Introduce phys_size_t and move phys_addr_t into asm/types.h + + Also add CONFIG_PHYS_64BIT on powerpc to deal with 32-bit ppc's + that have larger physical addresses like 44x, 85xx, and 86xx. + + Signed-off-by: Kumar Gala + +commit 20a14a42a25f72e379f38460b8a8484667536795 +Author: Andy Fleming +Date: Wed Apr 2 16:19:07 2008 -0500 + + Rename include/md5.h to include/u-boot/md5.h + + Some systems have md5.h installed in /usr/include/. This isn't the + desired file (we want the one in include/md5.h). This will avoid the + conflict. This fixes the host tools building problem by creating a new + directory for U-Boot specific header files. + + [Patch by Andy Fleming, modified to use separate directory by Wolfgang + Denk] + + Signed-off-by: Wolfgang Denk + Signed-off-by: Andy Fleming + Acked-by: Timur Tabi + +commit f297b7a1ec87433f66320d89d993e1bc738c66b8 +Author: Dave Liu +Date: Thu Mar 27 18:51:17 2008 +0800 + + drivers: code clean up + + Signed-off-by: Dave Liu + +commit 0ff7cba4a2e51c90827f6d21a0b28b4d67109597 +Author: Dave Liu +Date: Thu Mar 27 18:50:41 2008 +0800 + + drivers: clean up the ata_piix.h + + Signed-off-by: Dave Liu + +commit e8f7ba404f1409606962815ecc955a06984b08b3 +Author: Dave Liu +Date: Thu Mar 27 18:49:56 2008 +0800 + + doc: english polishing for README.sata + + according to gvb's suggestion, polishing for the doc. + + Signed-off-by: Jerry Van Baren + Signed-off-by: Dave Liu + +commit 3e3f766a5274d204780460e1879723b565296d34 +Author: Kumar Gala +Date: Wed Mar 26 18:53:28 2008 -0500 + + Fix warnings introduced by I2C bus speed setting patch + + Signed-off-by: Kumar Gala + +commit 3c735e7437150e8615f26930c7819db85634276d +Author: eran liberty +Date: Thu Mar 27 00:50:49 2008 +0100 + + Altera Stratix II support + + Adds Support for Altera's Stratix II. + + Within your board specific init file you will have to call + + 1. fpga_init (/* relocated code offset. usually => */ gd->reloc_off); + 2. fpga_add (fpga_altera, (Altera_desc*)&altera_desc); + + Altera_desc* contines (for example): + { + Altera_StratixII, /* part type */ + passive_serial, /* interface type */ + 1, /* bytes of data part can accept */ + (void *)(&funcs), /* interface function table */ + 0L, /* base interface address */ + 0 /* implementation specific cookie */ + } + + funcs is the interface. It is of type altera_board_specific_func. + It looks like this: + altera_board_specific_func func = { + pre_fn, + config_fn, + status_fn, + done_fn, + clk_fn, + data_fn, + abort_fn, + post_fn, + }; + + you will have to implement these functions, which is usually bit + banging some gpio. + + Signed-off-by: Eran Liberty + +commit 5ece9ec9f6cd52950ab848e2fe422dacf1d3a335 +Author: Wolfgang Denk +Date: Sun Apr 13 14:32:54 2008 -0700 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 5ad862166aa24d62a69aa9c708f6b2f5c0d28fb7 +Author: Sascha Hauer +Date: Wed Mar 26 20:41:17 2008 +0100 + + Phytec Phycore-i.MX31 support + + This patch adds support for the Phytec Phycore-i.MX31 board + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit caebc95be3b42e5147b5fac7672ac4b2693ef7e1 +Author: Sascha Hauer +Date: Wed Mar 26 20:41:09 2008 +0100 + + mx31 litekit support + + This patch adds support for the mx31 litekit board + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit cdace0661208754a53019ea0dc7b803a040e0939 +Author: Sascha Hauer +Date: Wed Mar 26 20:40:49 2008 +0100 + + add an i2c driver for mx31 + + This patch adds an i2c driver for Freescale i.MX processors + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 9b56f4f0306f3940b0aafd823ed6ecfc2d75d6c6 +Author: Sascha Hauer +Date: Wed Mar 26 20:40:42 2008 +0100 + + core support for Freescale mx31 + + This patch adds the core support for Freescale mx31 + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 7ec68862a27c8f6f6d566228de8f6724d964a939 +Author: Wolfgang Denk +Date: Sun Apr 13 14:19:23 2008 -0700 + + Fix compile error + + ...as suggested by Peter Pearse + + Signed-off-by: Wolfgang Denk + +commit 5252ed95204bdf55bec5a90ea69860bf2f78c643 +Author: Sascha Hauer +Date: Wed Mar 26 20:40:36 2008 +0100 + + Separate omap24xx specific code from arm1136 + + Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 + to cpu/arm1136/omap24xx. + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 1f1d88dd40815332df32982e739f2ddd2da6fe1a +Author: Mike Frysinger +Date: Tue Jan 29 18:21:05 2008 -0500 + + disable caches before booting an app for Blackfin apps + + It isn't generally save to execute applications outside of U-Boot with caches + enabled due to the way the Blackfin processor handles caches (requires + software assistance). This patch disables caches before booting an ELF or + just booting raw code. The previous discussion on the patch was that we + wanted to use weaks instead, but that proved to not be feasible when multiple + symbols are involved, which puts us back at the ifdef solution. I've + minimized the ugliness by moving the setup step outside of the main function. + + Signed-off-by: Mike Frysinger + +commit e6dfed705efa44ebf00d21bb1588c6ccc8f3ad32 +Author: Wolfgang Denk +Date: Sun Apr 13 10:03:54 2008 -0700 + + ppc: Get rid of unused machine type definitions + + Signed-off-by: Wolfgang Denk + +commit 1aeed8d71acb3290cf2446f316d6ba437e7881c4 +Author: Wolfgang Denk +Date: Sun Apr 13 09:59:26 2008 -0700 + + Coding Style cleanup; update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 7754f33c6fb7a2c050388d20bf3847038558bdcf +Author: Larry Johnson +Date: Thu Feb 21 13:58:11 2008 -0500 + + LM73 bug fix for negative temperatures and cleanup + + When the LM73 temperature sensor measures a temperature below 0 C, the + current driver does not perform sign extension, so the result returned is + 512 C too high. This patch fixes the problem, and does general cleanup + of the code. + + Signed-off-by: Larry Johnson + +commit 96ef831f713289afba19da0c8f905e99da2b23e0 +Author: Guennadi Liakhovetski +Date: Thu Apr 3 13:36:02 2008 +0200 + + cfi_flash: Support buffered writes on non-standard Spansion NOR flash + + Some NOR flash chip from Spansion, for example, the s29ws-n MirrorBit + series require different addresses for buffered write commands. Define a + configuration option to support buffered writes on those chips. A more + elegant solution would be to automatically detect those chips by parsing + their CFI records, but that would require introduction of a fixup table + into the cfi_flash driver. + + Signed-off-by: Guennadi Liakhovetski + +commit 3f9c542d3d69b1a10a5e193e779133a0454d1f44 +Author: Lee Nipper +Date: Thu Apr 10 09:35:06 2008 -0500 + + mpc83xx: Update DIMM data bus width test to support 40-bit width + + 32-bit wide ECC memory modules report 40-bit width. + Changed the DIMM data bus width test to 'less than 64' instead of 'equal 32'. + + Signed-off-by: Lee Nipper + Signed-off-by: Kim Phillips + +commit 5fb5a689d822ca61e814bd523fc930af335242fa +Author: Dave Liu +Date: Mon Mar 31 17:05:12 2008 +0800 + + mpc83xx: Fix the bug of serdes initialization + + Currently the serdes will not be initializated due to the + partid's error. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 2000784818f043db7ca60e2846a72d097766b894 +Author: Dave Liu +Date: Thu Apr 3 16:28:29 2008 +0800 + + mpc83xx: Fix the SATA clock setting of 837x targets + + Currently the SATA controller clock is configured as CSB clock, + usually the CSB clock is 400/333/266MHz. + + However, The SATA IP block is only guaranteed to operate up to + 200 MHz as stated in the HW spec. + + The bug is reported by Joe D'Abbraccio + + This patch makes the SATA clock as half of CSB clock. + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 1ac4f320bf0b593aa0a741f2d649a8ece8838672 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 2 13:41:21 2008 +0200 + + mpc837xerdb: Fix warning: implicit declaration of function 'fdt_fixup_dr_usb' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Kim Phillips + +commit 97b3ecb575a92fa34c1765229dbc06f2b662f139 +Author: Kumar Gala +Date: Wed Apr 9 04:20:57 2008 -0500 + + 85xx: Fix detection of MP cpu spin up + + We were looking at the wrong memory offset to determine of a secondary + cpu had been spun up or not. Also added a warning message if the + all the secondary cpus we expect don't spin up. + + Signed-off-by: Kumar Gala + +commit f3e04bdc3f360c66801a9048956e61e41a16edba +Author: Kumar Gala +Date: Tue Apr 8 10:45:50 2008 -0500 + + 85xx: Use SVR_SOC_VER instead of SVR_VER + + The recent change introduced by 'Update SVR numbers to expand support' + now requires that we use SVR_SOC_VER instead of SVR_VER if we want + to compare against a particular processor id. + + Signed-off-by: Kumar Gala + +commit 5b2052e5f5fcce5dbd4d2750a29c0e45bce806e7 +Author: Eugene O'Brien +Date: Fri Apr 11 10:00:35 2008 -0400 + + ppc4xx: Fix power mgt definitions for PPC440 + + Corrected DCR addresses of PPC440EP power management registers. + + Signed-off-by: Eugene O'Brien + +commit 950a392464e616b4590bc4501be46e2d7d162dea +Author: Wolfgang Denk +Date: Fri Apr 11 15:11:26 2008 +0200 + + Revert merge of git://www.denx.de/git/u-boot-arm, commit 62479b18: + + Reverting became necessary after it turned out that the patches in + the u-boot-arm repo were modified, and in some cases corrupted. + + This reverts the following commits: + + 066bebd6353e33af3adefc3404560871699e9961 + 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 + c88ae20580b2b01487b4cdcc8b2a113f551aee36 + a147e56f03871bba4f05058d5e04ce7deb010b04 + d6674e0e2a6a1f033945f78838566210d3f28c95 + 8c8463cce44d849e37744749b32d38e1dfb12e50 + c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d + 8bf69d81782619187933a605f1a95ee1d069478d + 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d + a574a73852a527779234e73e17e7597fd8128882 + 1377b5583a48021d983e1fd565f7d40c89e84d63 + 1704dc20917b4f71e373e2c888497ee666d40380 + + Signed-off-by: Wolfgang Denk + +commit 64e541f4c1b413dd84c7e409f5c2bf328db2ac13 +Author: Stefan Roese +Date: Fri Apr 11 07:02:29 2008 +0200 + + ppc4xx: Update Kilauea defconfig to use device-tree booting as default + + This patch reworks the default environment on Kilauea/Haleakala. Now + "net_nfs" for exmaple uses the device-tree style booting formerly know + as "net_nfs_fdt". Also the addresses in RAM were changed because of the + new image booting support, which check for image overwriting. So the + addresses needed togeet adjusted. + + Signed-off-by: Stefan Roese + +commit 756f5dacda3810b094b94bcceffd3ce6c7ff9a28 +Author: Stefan Roese +Date: Wed Apr 9 11:58:02 2008 +0200 + + ppc4xx: Fix Canyonlands default environment to work with new image support + + Since the new image support checks for image overwriting, the default + environment needs to get adjusted to use correct addresses. + + Signed-off-by: Stefan Roese + +commit dfc6c7b647dba7ab86749616f0e9e5740deed422 +Author: Stefan Roese +Date: Wed Apr 9 11:54:11 2008 +0200 + + ppc: Revert patch 70431e8a that used _start instead of CFG_MONITOR_BASE + + The patch 70431e8a7393b6b793f77957f95b999fc9a269b8 (Make MPC83xx one step + closer to full relocation.) doesn't use CFG_MONITOR_BASE anymore. But + on 4xx systems _start currently cannot be used for this calculation. + So revert back to the original version for now. + + Signed-off-by: Stefan Roese + +commit f91374f65eae8b42cac329e06ba1c54728278efb +Author: Michal Simek +Date: Fri Mar 28 12:49:52 2008 +0100 + + microblaze: Sort microblaze boards in MAKEALL script + +commit 62032deb7214c6d9b4396297e2aaa559bc2f8495 +Author: Michal Simek +Date: Fri Mar 28 11:58:45 2008 +0100 + + microblaze: clean microblaze_config.mk + + FLAGS are generated by U-BOOT generator. + Board specific FLAGS are in board directory + + Signed-off-by: Michal Simek + +commit cf5c679ca04a6b54bf53a55b8b9c29335b387287 +Author: Michal Simek +Date: Fri Mar 28 12:47:19 2008 +0100 + + microblaze: xupv2p fix config file for supporting FDT + +commit 188dc16b189143573b1ed90e584bf866d75cdd12 +Author: Michal Simek +Date: Fri Mar 28 11:53:02 2008 +0100 + + microblaze: ml401 fix config file for supporting FDT + + Signed-off-by: Michal Simek + +commit 4c6a6f02e239236261333759997eeaf86b30b54c +Author: Michal Simek +Date: Fri Mar 28 11:22:48 2008 +0100 + + microblaze: ml401 - add ifdef for GPIO + + Signed-off-by: Michal Simek + +commit af7ae1a411c67ee9d17a66d17ce50b374f3dd4e7 +Author: Michal Simek +Date: Fri Mar 28 12:13:03 2008 +0100 + + microblaze: clean uart16550 and uartlite handling + + Signed-off-by: Michal Simek + +commit 0b20f250877441460fb79d72192954abe8498834 +Author: Michal Simek +Date: Fri Mar 28 11:08:31 2008 +0100 + + microblaze: Add Emaclite driver to Makefile + + Signed-off-by: Michal Simek + +commit 868cde5310f88234b774878e4f06e79df10a88b3 +Author: Michal Simek +Date: Fri Mar 28 11:08:01 2008 +0100 + + microblaze: Add Emac driver to Makefile + + Signed-off-by: Michal Simek + +commit 6f961b4f461f6cbb83a467d468a02e6078c2b327 +Author: Michal Simek +Date: Fri Mar 28 12:42:29 2008 +0100 + + microblaze: add Emac ethernet driver + +commit 89c53891b18cbafd29ab8931b40e27ad231b6085 +Author: Michal Simek +Date: Fri Mar 28 12:41:56 2008 +0100 + + microblaze: add Emaclite ethernet driver + +commit e5845e21224dbe2fe47b11f1cdf95de7f84be7cb +Author: Michal Simek +Date: Fri Mar 28 11:04:01 2008 +0100 + + microblaze: ML401 and XUPV2P remove emac and emaclite reference + + Signed-off-by: Michal Simek + +commit 6bf3e982aefdb1daf9f5462d482c8f9d1cc90a57 +Author: Michal Simek +Date: Fri Mar 28 10:59:32 2008 +0100 + + microblaze: remove old setting for emac driver + + Signed-off-by: Michal Simek + +commit cd2b75efb9cc037c74ecee9b3586f9bf9e1d4e57 +Author: Michal Simek +Date: Fri Mar 28 10:58:15 2008 +0100 + + microblaze: Clean Makefile from ancient emac driver + + Signed-off-by: Michal Simek + +commit ab68f921d9c741830f721c3d879c13a0c5597183 +Author: Daniel Hellstrom +Date: Fri Mar 28 10:20:43 2008 +0100 + + SPARC/LEON2: added support for Gaisler simulator GRSIM/TSIM for SPARC/LEON2 targets. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 6ed8a43a19bb0275501bc286007daafa923552cf +Author: Daniel Hellstrom +Date: Wed Mar 26 23:38:48 2008 +0100 + + SPARC/LEON3: added support for GR-CPCI-AX2000 FPGA AX board. The FPGA is exchangeable but a standard LEON3 design is assumed. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 6940383d9ec1bfe2f13e339e6f723e8d34af2b12 +Author: Daniel Hellstrom +Date: Wed Mar 26 23:34:47 2008 +0100 + + SPARC/LEON3: added support for Altera NIOS Development kit (STRATIX II Edition) with GRLIB template design. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 823edd8a66ed50af5aaba0c79567f67061e4d79a +Author: Daniel Hellstrom +Date: Fri Mar 28 10:06:52 2008 +0100 + + SPARC/LEON3: added support for Gaisler GRSIM/TSIM2 SPARC/LEON3 simulatorn. See www.gaisler.com for information. + + Signed-off-by: Daniel Hellstrom + +commit 71d7e4c0489e5ed8fc69382236aaa2a1e510c135 +Author: Daniel Hellstrom +Date: Wed Mar 26 23:26:48 2008 +0100 + + SPARC/LEON3: added support for GR-XC3S-1500 board with GRLIB template design. See www.gaisler.com for board information. + + Signed-off-by: Daniel Hellstrom + +commit b330990c2f36ee4a8bb318360e1c8ba965269ab6 +Author: Daniel Hellstrom +Date: Fri Mar 28 10:00:33 2008 +0100 + + SPARC: Added support for SPARC LEON2 SOC Processor. + + Signed-off-by: Daniel Hellstrom + +commit 2a2fa797e63b1e3cd4d570318ca5fbf8723ef53a +Author: Daniel Hellstrom +Date: Wed Mar 26 23:00:38 2008 +0100 + + SPARC/LEON3: Added AMBA Bus Plug&Play information print command (ambapp). It can print available cores (type: AHB Master, AHB Slave, APB Slave), their address ranges, IRQ number and version. + + Signed-off-by: Daniel Hellstrom + +commit 1e9a164e22976933002c5e4b0b79b09fcede9cd4 +Author: Daniel Hellstrom +Date: Wed Mar 26 22:51:29 2008 +0100 + + SPARC: Added support for SPARC LEON3 SOC processor. + + Signed-off-by: Daniel Hellstrom + +commit bf3d8b31169546fcddb4737391e1893fb12d033a +Author: Daniel Hellstrom +Date: Fri Mar 28 08:29:26 2008 +0100 + + SPARC: added SPARC support for new uimage in common code. + + Signed-off-by: Daniel Hellstrom + +commit 00ab32c85405a4fe65fd4128243086210fc90a21 +Author: Daniel Hellstrom +Date: Wed Mar 26 22:36:03 2008 +0100 + + SPARC: added SPARC board information to the command bdinfo. + + Signed-off-by: Daniel Hellstrom + +commit c2f02da21a3f37f0878554eebc785e04fdc4e128 +Author: Daniel Hellstrom +Date: Fri Mar 28 09:47:00 2008 +0100 + + SPARC: Added generic support for SPARC architecture. + + Signed-off-by: Daniel Hellstrom + +commit e54ec0f016803e4d9524ff71f7971bda0c51b287 +Author: Stefan Roese +Date: Thu Apr 3 14:50:34 2008 +0200 + + ppc4xx: Fix 4xx enet driver to support 460GT EMAC2+3 + + This patch fixes a problem with the RGMII setup of the 460GT. The 460GT + has 2 RGMII instances and we need to configure the 2nd RGMII instance + for the EMAC2+3 channels. + + Signed-off-by: Stefan Roese + +commit c2a545ce33b26d80337f80b533828839249fb1c9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed Apr 2 08:03:56 2008 +0200 + + MPC8xx: Fix libfdt support introduced in commit 77ff7b74 + + fdt.c: In function 'ft_cpu_setup': + fdt.c:33: warning: implicit declaration of function 'do_fixup_by_prop_u32' + fdt.c:39: warning: implicit declaration of function 'do_fixup_by_compat_u32' + fdt.c:43: warning: implicit declaration of function 'fdt_fixup_ethernet' + fdt.c:45: warning: implicit declaration of function 'fdt_fixup_memory' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 4abd844d8eb108736e1cf8fbf3dbf61f2d5fc11b +Author: Andy Fleming +Date: Mon Mar 31 20:45:56 2008 -0500 + + Fix fdt set command to conform to dts spec + + The fdt set command was treating properties specified as <00> and <0011> + as byte streams, rather than as an array of cells. As we already have + syntax for expressing the desire for a stream of bytes ([ xx xx ...]), + we should use the <> syntax to describe arrays of cells, which are always + 32-bits per element. If we imagine this likely (IMHO) scenario: + + > fdt set /ethernet-phy@1 reg <1> + + With the old code, this would create a bad fdt, since the reg cell would be + made to be one byte in length. But the cell must be 4 bytes, so this would + break mysteriously. + + Also, the dts spec calls for constants inside the angle brackets (<>) + to conform to C constant standards as they pertain to base. + Take this scenario: + + > fdt set /ethernet@f00 reg <0xe250000\ 0x1000> + + The old fdt command would complain that it couldn't parse that. Or, if you + wanted to specify that a certain clock ran at 33 MHz, you'd be required to + do this: + + > fdt set /mydev clock <1f78a40> + + Whereas the new code will accept decimal numbers. + + While I was in there, I extended the fdt command parser to handle property + strings which are split across multiple arguments: + + > fdt set /ethernet@f00 interrupts < 33 2 34 2 36 2 > + > fdt p /ethernet@f00 + ethernet@f00 { + interrupts = <0x21 0x2 0x22 0x2 0x24 0x2>; + }; + + Lastly, the fdt print code was rearranged slightly to print arrays of cells + if the length of the property is a multiple of 4 bytes, and to not print + leading zeros. + + Signed-off-by: Andy Fleming + +commit 1c2926abdd7db89296a8cc7f224dd9d5d4e37a56 +Author: Stefan Roese +Date: Wed Apr 2 08:39:33 2008 +0200 + + ppc4xx: Canyonlands: Init SATA/PCIe port correctly + + Canyonlands (460EX) shares the first PCIe interface with the SoC SATA + interface. This usage can be configured with the jumper J6. This patch + correctly configures the SATA/PCIe PHY for SATA usage when this jumper + is installed. + + Signed-off-by: Stefan Roese + +commit 6fe2946f198481254a6ee9600d7456b8316a4083 +Author: Kim Phillips +Date: Fri Mar 28 17:37:49 2008 -0500 + + remove remaining CONFIG_OF_HAS_{UBOOT_ENV,BD_T} code + + finish off what commit 43ddd9c820fec44816188f53346b464e20b3142d, + "Remove deprecated CONFIG_OF_HAS_UBOOT_ENV and CONFIG_OF_HAS_BD_T" + started. + + Signed-off-by: Kim Phillips + +commit b5873f1732b92a25690e1513b90dfb0d644f6697 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Tue Apr 1 07:30:51 2008 +0200 + + dataflash: Move CONFIG_HAS_DATAFLASH to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2d934ea51f276522b532f870a820e844ff480b5b +Author: Tor Krill +Date: Fri Mar 28 15:29:45 2008 +0100 + + Add Vitesse 8601 support to TSEC driver + + Add phy_info for Vitesse VSC8601. + Add config option, CFG_VSC8601_SKEWFIX, to enable RGMII skew timing compensation. + + Signed-off-by: Tor Krill + Reviewed-by: Kim Phillips + Signed-off-by: Ben Warren + +commit 3eac6402a508b0f68a21cc9cbc2cc49347de0c31 +Author: Daniel Hellstrom +Date: Mon Mar 31 14:25:00 2008 +0000 + + SPARC: added SMC91111 driver in and out macros for LEON processors. + + This patch makes SPARC/LEON processors able to read and write + to the SMC91111 chip using the chip external I/O bus of the memory + controller. This patchs defines the standard in and out macros + expected by the SMC9111 driver. + + To access that I/O bus one must set up the memory controller + (MCTRL or FTMCTRL) correctly. It is assumed that the user sets + up this correctly when the other MCTRL parameters are set up. It + can be set up from the board configuration header file. + + Signed-off-by: Daniel Hellstrom + Signed-off-by: Ben Warren + +commit 3ca7c558eba36332556bc470d45e2f5d42bd0ca6 +Author: Stelian Pop +Date: Wed Mar 26 18:52:34 2008 +0100 + + Add maintainership information for AT91CAP9ADK and AT91SAM9260EK boards + + Signed-off-by: Stelian Pop + +commit 4e03dde84dd2c91e327cdc23ae119d432559a7a3 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 31 21:31:04 2008 +0200 + + AT91SAM9260EK: Move CONFIG_CMD_NAND to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 0176d43e759a6e00cacc85eff26fd60f74b4f6b7 +Author: Stelian Pop +Date: Wed Mar 26 18:52:33 2008 +0100 + + Add support for AT91SAM9260EK + + Support for booting from internal DataFlash, external DataFlash card + or NAND flash is available. + + Signed-off-by: Stelian Pop + +commit 1762f13b4aab88b685b1722f17dada247945624b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 31 21:20:49 2008 +0200 + + AT91SAM9: Move CONFIG_HAS_DATAFLASH to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 761712188b353494defb2b644491ff73d0daaa6f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 31 21:12:17 2008 +0200 + + AT91CAP9ADK: Move CONFIG_CMD_NAND to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 983c1db04c1dd0f92e02f06d29f0c65a3d9a2687 +Author: Stelian Pop +Date: Wed Mar 26 20:52:32 2008 +0100 + + Port AT91CAP9 to the new headers + + Adapt the existing AT91CAP9 code to the new headers and APIs. + + Signed-off-by: Stelian Pop + +commit 177e8a5ac81bbc531a1d54abdb47f2860266c3aa +Author: Stelian Pop +Date: Wed Mar 26 19:52:31 2008 +0100 + + Finish header files reworking + + Replace AT91CAP9.h file with several splitted header files coming + from the Linux kernel. + + This is part 2 of the replacement: more header imports and edits. + + Signed-off-by: Stelian Pop + +commit 6d1dbbbf9fdf727384002e553e615c15d8b967f4 +Author: Stelian Pop +Date: Wed Mar 26 19:52:30 2008 +0100 + + Import several header files from Linux + + Replace AT91CAP9.h file with several splitted header files coming + from the Linux kernel. + + This is part 1 of the replacement: pristine header files import. + + Signed-off-by: Stelian Pop + +commit a8a78f2d99dc1bd30dc3595da118539b506c6118 +Author: Stelian Pop +Date: Wed Mar 26 20:52:28 2008 +0100 + + Move at91cap9 specific files to at91sam9 directory + + AT91CAP9 and AT91SAM9 SoCs are very close hardware wise, so a + common infrastructure can be used. Let this infrastructure be + named after the AT91SAM9 family, and move the existing AT91CAP9 + files to the new place. + + Signed-off-by: Stelian Pop + +commit 61106a565870ff503f92b251b94bd7afef889a04 +Author: Stelian Pop +Date: Wed Mar 26 21:52:27 2008 +0100 + + Use timer_init() instead of board supplied interrupt_init() + + The timer on AT91CAP9/AT91SAM9 is supplied by the SoC, and not by + the board, so use timer_init() instead of interrupt_init(). + + Signed-off-by: Stelian Pop + +commit 5604e2178c5218fbfdba2e4293ca7652e829ac25 +Author: Stelian Pop +Date: Wed Mar 26 21:52:36 2008 +0100 + + Cleanup DataFlash partition handling + + DataFlash partition information has become a mess. This patch + defines a single partition scheme for Atmel DataFlashes. This partition + scheme will be used by all AT91CAP9 and AT91SAM9 boards. + + Signed-off-by: Stelian Pop + +commit 9b46432fc65ce0f0826b32e4f15c15b33ccb8d42 +Author: TsiChung Liew +Date: Fri Mar 28 08:47:45 2008 -0500 + + ColdFire: Fix alignment issue after CONFIG_IDENT_STRING in start.S + + When the version_string function in start.S is not 4-byte align, + it will cause the compiler generates "unaligned opcodes detected + in executable segment". This issue affects all ColdFire CPUs. + By adding .align 4 after CONFIG_IDENT_STRING, it will pad 0's if + it is not aligned. + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit bae61eefe15b4d454060a7140e49ae58322be803 +Author: TsiChung Liew +Date: Tue Mar 25 15:41:15 2008 -0500 + + ColdFire: Add dspi and serial flash support for MCF5445x + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit 48ead7a7a922fceaf494e352abfab8216a41b417 +Author: TsiChung Liew +Date: Tue Mar 18 17:37:01 2008 -0500 + + ColdFire: Remove R5200 board + + This board never went into production + + Signed-off-by: Zachary P. Landau + Acked-by: TsiChung Liew + Acked-by: John Rigby + +commit 545c8e0a7cd3ca9d3846668f69b0d201250abea8 +Author: Matthew Fettke <[matthew.fettke@gmail.com]> +Date: Thu Jan 24 14:02:32 2008 -0600 + + ColdFire: Added M5275EVB support. + + Signed-off-by: Matthew Fettke + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit f71d9d91a2cd9c30b2b6369f15c1a46c11537c2b +Author: Matthew Fettke <[matthew.fettke@gmail.com]> +Date: Mon Feb 4 15:38:20 2008 -0600 + + ColdFire: Added MCF5275 cpu support. + + Signed-off-by: Matthew Fettke + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit 44e5b9edab077aba6e9b849afa4b7fbd8fd7b02b +Author: TsiChung Liew +Date: Mon Mar 17 12:14:11 2008 -0500 + + ColdFire: Define bootdelay in configuration file for M52277EVB + + Signed-off-by: Matt Wadel + Acked-by: TsiChung Liew + Acked-by: John Rigby + +commit 77878f16cedee17161ff2336990970fffc6cea35 +Author: TsiChung Liew +Date: Mon Mar 17 12:09:07 2008 -0500 + + ColdFire: Fix second memory Chipselect for M5475EVB + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit 43d60642395a550956cb21d287c8cfa563913d28 +Author: TsiChung Liew +Date: Thu Mar 13 14:26:32 2008 -0500 + + ColdFire: Update correct FLASHBAR and RAMBAR1 for MCF5282 + + Signed-off-by: TsiChung Liew + Acked-by: John Rigby + +commit eb14ebe813a0cb5d47905228da446a5ad692473b +Author: Larry Johnson +Date: Sun Mar 30 20:33:04 2008 -0500 + + ppc4xx: Add CFG_MEM_TOP_HIDE to Denali SPD-based SDRAM setup + + Signed-off-by: Larry Johnson + +commit 02e3892021112f21067d9ed1d04ae4182725ba52 +Author: Stefan Roese +Date: Mon Mar 31 12:20:48 2008 +0200 + + ppc4xx: Small whitespace fix of esd patches + + Signed-off-by: Stefan Roese + +commit 034394abb524785047c815f00dde8cdbdc1593c5 +Author: Matthias Fuchs +Date: Sun Mar 30 18:52:44 2008 +0200 + + ppc4xx: Cleanup PMC440 board support + + Signed-off-by: Matthias Fuchs + +commit a6cc6c37188d85c25d167a4515da86f48d9a583e +Author: Matthias Fuchs +Date: Sun Mar 30 18:52:06 2008 +0200 + + ppc4xx: Add ptm configuration variables for PMC440 + + Add support for the ptm1la, ptm1ms, ptm2la and ptm2ms + environment variables. + + Cleanup pci_target_init. + + Signed-off-by: Matthias Fuchs + +commit 7c91f51a2fe296909147f1646a1412729dd10b1d +Author: Matthias Fuchs +Date: Sun Mar 30 18:01:15 2008 +0200 + + ppc4xx: Minor updates for DU440 boards + + Signed-off-by: Matthias Fuchs + +commit d5bffeb868d6b4d462f558dac43011027b6644b7 +Author: Mike Frysinger +Date: Tue Feb 19 00:54:20 2008 -0500 + + Blackfin: cleanup and overhaul common board init functions + + Signed-off-by: Mike Frysinger + +commit b86b3416f874358acaf07519e7620cdb2145f75b +Author: Mike Frysinger +Date: Tue Feb 19 00:50:58 2008 -0500 + + Blackfin: cleanup lib_blackfin/cache.c + + Signed-off-by: Mike Frysinger + +commit 9171fc81722c20fdb5a829a58b17c9eaadd5fb44 +Author: Mike Frysinger +Date: Sun Mar 30 15:46:13 2008 -0400 + + Blackfin: unify cpu and boot modes + + All of the duplicated code for Blackfin processors and boot modes have been + unified. After all, the core is the same for all processors, just the + peripheral set differs (which gets handled in the drivers). + + Signed-off-by: Mike Frysinger + +commit 880cc4381ea8360248cddcdf87a64566745a5724 +Author: Stelian Pop +Date: Wed Mar 26 22:52:35 2008 +0100 + + Fix CFG_NO_FLASH compilation. + + Many Atmel boards have no "real" (NOR) flash on board, and rely only + on DataFlash and NAND memories. This patch enables CFG_NO_FLASH to + be present in a board configuration file, while still enabling flash + commands like 'flinfo', 'protect', etc. + + Signed-off-by: Stelian Pop + +commit 9ce7e53abd039decea1af67aec81bbd5df7a2593 +Author: Mike Frysinger +Date: Tue Feb 19 00:58:13 2008 -0500 + + Blackfin: BF537-stamp: cleanup spi flash driver + + This punts the old spi flash driver for a new/generalized one until the + common one can be integrated. + + Signed-off-by: Mike Frysinger + +commit bb8e3cf25bc0b04936c0c1a075985dd8700a244b +Author: Ben Warren +Date: Sun Mar 30 11:34:34 2008 -0400 + + Fix macro typo in common/cmd_mii.c + + This typo was introduced in commit 233a8bcd94997f3f345833a3b82e836222f2a206. I + actually applied the wrong patch. + + Signed-off-by: Ben Warren + +commit f1b985f2d724ccaa4d3def07917f0caaf18fa77d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 30 16:39:53 2008 +0200 + + use correct at91rm9200 register name in m501sk board + + This fixes a naming bug for at91rm9200 lowlevel init code: + NOR boot flash is on chipselect 0, not chipselect 2. This + makes code use the register name from chip datasheets. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 480ed1dea103a1c8f4591afc77d2de3c7868d983 +Author: David Brownell +Date: Fri Jan 18 12:55:00 2008 -0800 + + use correct at91rm9200 register name + + This fixes a naming bug for at91rm9200 lowlevel init code: + NOR boot flash is on chipselect 0, not chipselect 2. This + makes code use the register name from chip datasheets. + + Signed-off-by: David Brownell + +commit a3543d6dc52b0ba9c64016687cf32d600b31a476 +Author: David Brownell +Date: Fri Jan 18 12:45:45 2008 -0800 + + add missing ARM boards to MAKEALL + + Add some missing ARM boards to MAKEALL. These build correctly, + unlike several of the boards already listed. + + Signed-off-by: David Brownell + +commit 066bebd6353e33af3adefc3404560871699e9961 +Author: Peter Pearse +Date: Sun Mar 30 11:34:09 2008 +0100 + + Bracket READ_TIMER macro in cpu/arm1136/omap24xx/interrupts.c + to prevent compilation error. + + Signed-off-by: Peter Pearse + +commit 7a837b7310166ae8fc8b8d66d7ef01b60a80f9d6 +Author: Guennadi Liakhovetski <[lg@denx.de]> +Date: Sun Mar 30 11:32:30 2008 +0100 + + Support for the MX31ADS evaluation board from Freescale + + This patch adds support for the MX31ADS evaluation board from Freescale, + initialization code is copied from RedBoot sources, also provided by Freescale. + + Signed-off-by: Guennadi Liakhovetski + +commit c88ae20580b2b01487b4cdcc8b2a113f551aee36 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:27 2008 +0100 + + Phytec Phycore-i.MX31 support + + This patch adds support for the Phytec Phycore-i.MX31 board + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit a147e56f03871bba4f05058d5e04ce7deb010b04 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:24 2008 +0100 + + mx31 litekit support + + This patch adds support for the mx31 litekit board + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit d6674e0e2a6a1f033945f78838566210d3f28c95 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:21 2008 +0100 + + add SMSC LAN9x1x Network driver + + This patch adds a driver for the following smsc network controllers: + LAN9115 + LAN9116 + LAN9117 + LAN9215 + LAN9216 + LAN9217 + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 8c8463cce44d849e37744749b32d38e1dfb12e50 +Author: Sascha Hauer +Date: Sun Mar 30 11:32:16 2008 +0100 + + add an i2c driver for mx31 + + This patch adds an i2c driver for Freescale i.MX processors + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit c98b47ad24b2d91f41c09a3d62d7f70ad84f4b7d +Author: Sascha Hauer +Date: Sun Mar 30 11:30:43 2008 +0100 + + core support for Freescale mx31 + + This patch adds the core support for Freescale mx31 + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 8bf69d81782619187933a605f1a95ee1d069478d +Author: Sascha Hauer +Date: Sun Mar 30 11:28:46 2008 +0100 + + Separate omap24xx specific code from arm1136 + + Move omap24xx code to cpu/arm1136/omap24xx, rename include/asm-arm/arch-arm1136 to cpu/arm1136/omap24xx. + + Signed-off-by: Sascha Hauer + Signed-off-by: Guennadi Liakhovetski + +commit 8c16cb0d3b971f46fbe77c072664c0f2dcd4471d +Author: Peter Pearse +Date: Sun Mar 30 11:23:05 2008 +0100 + + Add pmdra into MAKEALL + + Signed-off-by: Peter Pearse + +commit a574a73852a527779234e73e17e7597fd8128882 +Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> +Date: Sun Mar 30 11:21:58 2008 +0100 + + Adds support for the Prodrive PMDRA board, based on a DM6441 + + Signed-off-by: Pieter Voorthuijsen + +commit 1377b5583a48021d983e1fd565f7d40c89e84d63 +Author: Pieter Voorthuijsen <[pieter.voorthuijsen@Prodrive.nl]> +Date: Sun Mar 30 11:11:34 2008 +0100 + + Removes all board specific code from the arch. part for DM644x (DaVinci) boards + + Signed-off-by: Pieter Voorthuijsen + +commit 1704dc20917b4f71e373e2c888497ee666d40380 +Author: Dirk Behme +Date: Sun Mar 30 11:09:01 2008 +0100 + + - Remove *_masked() functions as noted by Wolfgang + - Adapt register naming to recent TI spec (sprue26, March 2007) + - Fix reset_timer() handling + - As reported by Pieter [1] the overflow fix introduced a + delay of factor 16 (e.g 2 seconds became 32). While the + overflow fix is basically okay, it missed to divide udelay by + 16, too. Fix this. + [1] http://article.gmane.org/gmane.comp.boot-loaders.u-boot/38179 + - Remove software division of timer count value (DIV(x) + macro) and do it in hardware (TIM_CLK_DIV). + Many thanks to Troy Kisky + and Pieter Voorthuijsen for + the hints & testing! + + Signed-off-by: Dirk Behme + + Acked-by: Pieter Voorthuijsen + +commit ac3315c26e143c31680750c9c13f027efbcc887e +Author: Andre Schwarz +Date: Thu Mar 6 16:45:44 2008 +0100 + + new PHY @ e1000 - 2nd try + + Add 82541ER device with latest integrated IGP2 PHY. + Introduced CONFIG_E1000_FALLBACK_MAC for NIC bring-up with empty eeprom. + + Signed-off-by: Andre Schwarz + Signed-off-by: Ben Warren + +commit c2b7da552293b50c9c9e46ed71267b02c2de9ea8 +Author: Daniel Hellstrom +Date: Fri Mar 28 20:22:53 2008 +0100 + + SPARC/LEON3: Added GRETH Ethernet 10/100/1000 driver. + + GRETH is an Ethernet 10/100 or 10/100/1000 MAC with out without + a debug link (EDCL). The GRETH core is documented in GRIP.pdf + available at www.gaisler.com. + + If the GRETH has GigaBit support (GBIT, Scatter gather, checksum + offloading etc.) can be determined by a bit in the control register. + The GBIT MAC is supported by operating in GRTEH 10/100 legacy mode. + + Signed-off-by: Daniel Hellstrom + Signed-off-by: Ben Warren + +commit 233a8bcd94997f3f345833a3b82e836222f2a206 +Author: Tsi-Chung Liew +Date: Mon Mar 17 17:08:22 2008 -0500 + + Add CONFIG_MII_INIT in cmd_mii.c + + Provide common configuration in do_mii() to execute mii_init() + for all cpu architectures + + Signed-off-by: TsiChung Liew + Signed-off-by: Ben Warren + +commit f605479de2deb11e834f31dfdb0af107c86aced6 +Author: Tsi-Chung Liew +Date: Mon Mar 17 17:08:16 2008 -0500 + + ColdFire: Fix FEC transmit issue for MCF5275 + + Signed-off-by: TsiChung Liew + Signed-off-by: Ben Warren + +commit d9a2f416d6ac6058cd7845033ae4dc32ef1c0746 +Author: Aras Vaichas +Date: Wed Mar 26 09:43:57 2008 +1100 + + DHCP request fix for Windows Server 2003 + + Added option CONFIG_BOOTP_DHCP_REQUEST_DELAY. This provides an optional + delay before sending "DHCP Request" in net/bootp.c. Required to overcome + interoperability problems with Windows Server 200x DHCP server when U-Boot + client responds too fast for server to handle. + + Signed-off-by: Aras Vaichas + Signed-off-by: Ben Warren + +commit 97bf85d784fbed485e652eb907589ad0d5cb7262 +Author: Daniel Hellstrom +Date: Fri Mar 28 20:40:19 2008 +0100 + + MTD/CFI: flash_read64 is defined a weak function (for SPARC) + + SPARC has implemented __raw_readq, it reads 64-bit from any 32-bit address. + SPARC CPUs implement flash_read64 which calls __raw_readq. + + For current SPARC architectures (LEON2 and LEON3) each read from the + FLASH must lead to a cache miss. This is because FLASH can not be set + non-cacheable since program code resides there, and alternatively disabling + cache is poor from performance view, or doing a cache flush between each + read is even poorer. + + Forcing a cache miss on a SPARC is done by a special instruction "lda" - + load alternative space, the alternative space number (ASI) is processor + implementation spcific and can be found by including . + + Signed-off-by: Daniel Hellstrom + +commit 70431e8a7393b6b793f77957f95b999fc9a269b8 +Author: Joakim Tjernlund +Date: Fri Mar 28 15:41:25 2008 +0100 + + Make MPC83xx one step closer to full relocation. + + Remove a few absolute references to CFG_MONITOR_BASE for ppc/mpc83xx + and use GOT relative reference. + + Signed-off-by: Joakim Tjernlund + Signed-off-by: Kim Phillips + +commit 5b2793a3f3de34d439232b05acc8af67a028fd35 +Author: Michael Barkowski +Date: Thu Mar 27 14:34:43 2008 -0400 + + mpc8323erdb: fix EEPROM page size and get MAC from EEPROM + + This patch fixes eeprom page size so that you can now write more than + 64 bytes at a time. + + It also makes the board take MAC addresses, if found, from EEPROM. + + User should place up to 4 addresses at offset 0x7f00, for + eth{,1,2,3}addr. Any unused addresses should be zero. This group of + four six-byte values should have it's CRC at the end. crc32 and + eeprom commands can be used to accomplish this. + + If CRC fails, MAC addresses come from the environment. If CRC + succeeds, the environment is overwritten at startup. + + Signed-off-by: Michael Barkowski + Signed-off-by: Kim Phillips + +commit 8f325cff31f6e745e6540014b131b9a97f61944c +Author: Michael Barkowski +Date: Fri Mar 28 15:15:38 2008 -0400 + + mpc8323erdb: define CONFIG_PCI_SKIP_HOST_BRIDGE + + Commit 55774b512fdf63c0516d441cc5da7c54bbffb7f2 broke the onboard USB + controller on the PCI bus in Linux on the MPC8323ERDB. + + This fixes it by defining CONFIG_PCI_SKIP_HOST_BRIDGE in the board's + config file. + + Signed-off-by: Michael Barkowski + Signed-off-by: Kim Phillips + +commit e5c4ade4db1e16d3e5d4a7887f34e10e516ed3a9 +Author: Kim Phillips +Date: Fri Mar 28 10:19:07 2008 -0500 + + mpc83xx: cleanup System Part and Revision ID Register (SPRIDR) code + + in the spirit of commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6, + 85xx's "Update SVR numbers to expand support", simplify SPRIDR processing + and processor ID display. Add REVID_{MAJ,MIN}OR macros to make + REVID dependent code simpler. Also added PARTID_NO_E and IS_E_PROCESSOR + convenience macros. + + Signed-off-by: Kim Phillips + +commit 81fd52c6c8fd19f0b7856b98217ce37c46c521af +Author: Kim Phillips +Date: Fri Mar 28 10:18:53 2008 -0500 + + mpc83xx: display ddr frequency in board_add_ram_info banner + + Signed-off-by: Kim Phillips + +commit 35cf155c5ec1ceab2849fa5b6aa3d9a3e9e6f482 +Author: Kim Phillips +Date: Fri Mar 28 10:18:40 2008 -0500 + + mpc83xx: unreinvent mem_clk + + delete ddr_clk and use mem_clk instead. Rename other ddr_*_clk to + mem_*_clk for consistency's sake. + + Signed-off-by: Kim Phillips + +commit 730e792926ca3fe4dd1b734a3bf44e55afa6f536 +Author: Kim Phillips +Date: Fri Mar 28 14:31:23 2008 -0500 + + mpc83xx: enable the SATA interface on mpc8315 rdb and mpc837x rdb boards + + Signed-off-by: Kim Phillips + +commit 2eeb3e4fc54ef2f5d574dafd42c6ce93afa30393 +Author: Dave Liu +Date: Wed Mar 26 22:57:19 2008 +0800 + + mpc83xx: enable the SATA interface on mpc837xemds board + + Enable the first two SATA interfaces on MPC837xEMDS board, + The two SATA ports are on LYNX1. (SATA0/1 on J4/5) + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit 6f8c85e8d1865730c158d9ef5a06c70c3a10600a +Author: Dave Liu +Date: Wed Mar 26 22:56:36 2008 +0800 + + mpc83xx: initialize serdes for MPC837xEMDS boards + + This patch is stolen from Anton Vorontsov's patch + for mpc837xerdb boards. + + The reference clk and xcorevdd voltage of serdes1/2 + is same between mpc837xemds and mpc837xerdb. + + 8377E: LYNX1- 2 SATA LYNX2- 2 PCIE + 8378E: LYNX1- 2 SGMII LYNX2- 2 PCIE + 8379E: LYNX1- 2 SATA LYNX2- 2 SATA + + Signed-off-by: Dave Liu + Signed-off-by: Kim Phillips + +commit cc8e839abc80887ae832767b5930d40edd6d7eb7 +Author: Stefan Roese +Date: Fri Mar 28 14:09:04 2008 +0100 + + ppc4xx: Canyonlands: Print SATA/PCIe configuration and board revision + + Canyonlands (460EX) shares the first PCIe interface with the SoC SATA + interface. This usage can be configured with the jumper J6. This patch + displays the current configuration upon bootup and changes the PCIe + init loop, to only initialize the availabel PCIe slots. + + Signed-off-by: Stefan Roese + +commit 90447ecbbac8572457b6d8903073ac3f120995ba +Author: Tor Krill +Date: Fri Mar 28 11:29:10 2008 +0100 + + MTD/CFI: Add support for 16bit legacy AMD flash + + Add entry for 512Kx16 AMD flash to jedec_table. + Read out 16bit device id if chipwidth is 16bit. + Fixed coding style after Stefans feedback + + Signed-off-by: Tor Krill + +commit 5e12e75d17c4b15a310a45cd78fe71b7698a8a8e +Author: Stefan Roese +Date: Fri Mar 28 11:02:53 2008 +0100 + + ppc: Small change to CFG_MEM_TOP_HIDE description + + Signed-off-by: Stefan Roese + +commit 280df59a8d62c6e74c281b1cb7e2052df4d6cb00 +Author: Nobuhiro Iwamatsu +Date: Thu Mar 27 15:44:12 2008 +0900 + + sh: Add support stat structure and stat.h + + Signed-off-by: Nobuhiro Iwamatsu + +commit 4be9eb789e72b845d6693cc36b70a0b3529b3f09 +Author: Mark Jonas +Date: Sat Mar 22 19:27:52 2008 +0100 + + sh: Removed warning when compiling drivers/serial/serial_sh.c. + + Signed-off-by: Mark Jonas + Signed-off-by: Nobuhiro Iwamatsu + +commit f309fa38929ffba71230c02330ffa42f4bba6333 +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 18:02:57 2008 +0900 + + sh: Remove disable_ctrlc function from R7780MP + + Signed-off-by: Nobuhiro Iwamatsu + +commit 6f4b266ff2a4fcc2bff985d6a217852469afddb3 +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 17:55:15 2008 +0900 + + sh: Add maintainer of R7780MP to MAINTAINER file + + Update MAINTAINER entry for R7780MP. And fix maintainer's name. + + Signed-off-by: Nobuhiro Iwamatsu + +commit f5e2466f7baa887a7df0c536333eea8231333497 +Author: Nobuhiro Iwamatsu +Date: Tue Mar 25 17:11:24 2008 +0900 + + sh: Add support Renesas Solutions R2D plus board + + R2D plus is SH reference board used with SH7751R. + This board has 266Mhz CPU, 64MB SDRAM, Cardbus, CF interface, + one PCI bus, VGA, and two Ethernet controller. + + Signed-off-by: Nobuhiro Iwamatsu + +commit e92c95180bb5bc5fd4051598a9d60beaba48988d +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 12:15:29 2008 +0900 + + sh: Add support SH4 cache control + + Add support SH4 cache control and flash_cache function + + Signed-off-by: Nobuhiro Iwamatsu + +commit 28e5efde4d925fcb34901d0030d0648de2da7e89 +Author: Nobuhiro Iwamatsu +Date: Mon Mar 24 01:53:01 2008 +0900 + + sh: Add support PCI host driver for SH7751/SH7751R + + Signed-off-by: Nobuhiro Iwamatsu + +commit ab8f4d40d069cd3cbe7563ddfe3e5f03b0c7c721 +Author: Nobuhiro Iwamatsu +Date: Mon Mar 24 02:11:26 2008 +0900 + + sh: Move SuperH PCI driver from cpu/sh4 to drivers/pci + + Signed-off-by: Nobuhiro Iwamatsu + +commit 566933278101c144d75361ea682678a326c1290d +Author: Nobuhiro Iwamatsu +Date: Wed Mar 12 12:10:28 2008 +0900 + + sh: Add support SuperH SH7751/SH7751R + + Signed-off-by: Nobuhiro Iwamatsu + +commit 3313e0e26224fc9a0c445124f3455058c696df84 +Author: Mark Jonas +Date: Mon Mar 10 11:37:10 2008 +0100 + + sh: Added support for SH7720 based board MPR2. + + Signed-off-by: Mark Jonas + Signed-off-by: Nobuhiro Iwamatsu + +commit 3ecff1d70ae93e628fe65b3fe1fc7c9c76cdf99f +Author: Nobuhiro Iwamatsu +Date: Thu Mar 6 14:05:53 2008 +0900 + + sh: Fix receive FIFO level register of SH4A + + Receive FIFO level register is different in SH4A. + Because register is different, cannot occasionally receive data. + + Signed-off-by: Nobuhiro Iwamatsu + +commit c133c1fb0b590662206b0eba70f4478ee0300a9a +Author: Yusuke Goda +Date: Tue Mar 11 12:55:12 2008 +0900 + + sh: Add support Renesas Solutions R7780MP + + Renesas Solutions R7780MP is a reference board on SH7780. + This board has serial, 10/100 base Ethernet deivice, CF slot + and VGA devices. This board can set extension board. + Extension board has 10/100/1000 base Ethernet device, PCI slot, + S-ATA, iDVR slot. + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit 1a2334a4eb6386d7cd35d9de5fa39af2c764ad28 +Author: Yusuke Goda +Date: Wed Mar 5 14:30:02 2008 +0900 + + sh: Add support PCI of SuperH and SH7780 + + This patch add support PCI of SuperH base code and SH7780 specific code. + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit b55523efff2ae11f0b9ae3cc405893c32eb78156 +Author: Yusuke Goda +Date: Wed Mar 5 14:23:26 2008 +0900 + + sh: Add support SH7780 + + SH7780 is CPU of Renesas Technology. + This CPU has + - CPU clock 400MHz + - PCI support + - DDR-SDRAM controller + - etc ... + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit c2042f5952a686c414031309b8f244513bf578f0 +Author: goda.yusuke +Date: Fri Jan 25 20:46:36 2008 +0900 + + sh: Add support Renesas Solutions Migo-R board + + Migo-R is a board based on SH7722 and has may devices. + In this patch, supported SCIF, NOR flash and Ethernet. + + Signed-off-by: Yusuke Goda + Signed-off-by: Nobuhiro Iwamatsu + +commit 74d1e66d22dac91388bc538b2fe19f735edc5b82 +Author: Bartlomiej Sieka +Date: Thu Mar 27 15:06:40 2008 +0100 + + Fix host tool build breakage, take two + + Revert commit 87c8431f and fix build breakage so that the build continues + to work on FC systems. + + Signed-off-by: Bartlomiej Sieka + +commit 7e4a0d25ed18f6437bdf59ebfa49bb0edc2f24e6 +Author: Stefan Roese +Date: Wed Mar 19 09:36:47 2008 +0100 + + ppc4xx: Enable ECC on LWMON5 + + Since all ECC related problems seem to be resolved on LWMON5, this patch + now enables ECC support. + + We have to write the ECC bytes by zeroing and flushing in smaller + steps, since the whole 256MByte takes too long for the external + watchdog. + + Signed-off-by: Stefan Roese + +commit 6433fa202a91a6594dd48f06807ac38ba27fa0bb +Author: Larry Johnson +Date: Mon Mar 17 11:10:35 2008 -0500 + + ppc4xx: Updates to Korat-specific code + + This patch contains updates for changes for the Korat PPC440EPx board. + These changes include: + + (1) Support for "permanent" and "upgradable" copies of U-Boot, as + described in the new "doc/README.korat" file; + + (2) a new memory map for the registers in the board's CPLD; + + (3) a revised format for manufacturer's data in serial EEPROM; and + + (4) changes to track updates to U-Boot for the Sequoia board. + + Signed-off-by: Larry Johnson + +commit f766cdf89b3a2a7634b8c5869f606150e332036c +Author: Markus Brunner +Date: Thu Mar 27 10:46:25 2008 +0100 + + ppc4xx: PPC405EP Set EMAC noise filter bits + + This bug was introduced with commit aee747f19b460a0e9da20ff21e90fdaac1cec359 + which enabled CFG_4xx_GPIO_TABLE for PPC405 and unintentionally + disabled the setting of the emac noise filter bits for PPC405EP when CFG_4xx_GPIO_TABLE is set. + + Signed-off-by: Markus Brunner + Signed-off-by: Stefan Roese + +commit f66e2c8b25c04b79e5fb385bc8989c2de7f63991 +Author: Mike Nuss +Date: Wed Feb 20 11:54:20 2008 -0500 + + ppc4xx: Reconfigure PLL for 667MHz processor for PPC440EPx + + On PPC440EPx without a bootstrap I2C EEPROM, the PLL can be reconfigured + after startup to change the speed of the clocks. This patch adds the + option CFG_PLL_RECONFIG. If this option is set to 667, the CPU + initialization code will reconfigure the PLL to run the system with a CPU + frequency of 667MHz and PLB frequency of 166MHz, without the need for an + external EEPROM. + + Signed-off-by: Mike Nuss + Acked-by: Stefan Roese + +commit 87c8431fe24d48121f053fe67cff4ccfe097d4d1 +Author: Haavard Skinnemoen +Date: Thu Mar 27 09:12:40 2008 +0100 + + new-image: Fix host tool build breakage + + Signed-off-by: Haavard Skinnemoen + +commit 6fb4b640562a10daff0dbe537638d511b5b48650 +Author: Stefan Roese +Date: Thu Mar 27 10:24:03 2008 +0100 + + ppc: Set CFG_MEM_TOP_HIDE to 0 if not already defined + + Signed-off-by: Stefan Roese + +commit 9462732a3ec551c11862450902cd8ee1bedea6d9 +Author: Stefan Roese +Date: Wed Mar 19 10:23:43 2008 +0100 + + ppc4xx: Add fdt support to Prodrive alpr + + Since this board will probably be ported to arch/powerpc in the + near future, we add device tree support now. This way we are + "ready" for arch/powerpc from now on. + + Signed-off-by: Stefan Roese + +commit 511e4f9e7f7b6719e4d91d7f0fc89412b13b5150 +Author: Pieter Voorthuijsen +Date: Mon Mar 17 09:27:56 2008 +0100 + + ppc4xx: Enable cache support on the ALPR board + + Signed-off-by: Pieter Voorthuijsen + +commit 14f73ca679f6fdb44cff0b7304d419db41a0ab69 +Author: Stefan Roese +Date: Wed Mar 26 10:14:11 2008 +0100 + + ppc: Add CFG_MEM_TOP_HIDE option to hide memory area that doesn't get "touched" + + If CFG_MEM_TOP_HIDE is defined in the board config header, this specified + memory area will get subtracted from the top (end) of ram and won't get + "touched" at all by U-Boot. By fixing up gd->ram_size the Linux kernel + should gets passed the now "corrected" memory size and won't touch it + either. This should work for arch/ppc and arch/powerpc. Only Linux board + ports in arch/powerpc with bootwrapper support, which recalculate the + memory size from the SDRAM controller setup, will have to get fixed + in Linux additionally. + + This patch enables this config option on some PPC440EPx boards as a workaround + for the CHIP 11 errata. Here the description from the AMCC documentation: + + CHIP_11: End of memory range area restricted access. + Category: 3 + + Overview: + The 440EPx DDR controller does not acknowledge any + transaction which is determined to be crossing over the + end-of-memory-range boundary, even if the starting address is + within valid memory space. Any such transaction from any PLB4 + master will result in a PLB time-out on PLB4 bus. + + Impact: + In case of such misaligned bursts, PLB4 masters will not + retrieve any data at all, just the available data up to the + end of memory, especially the 440 CPU. For example, if a CPU + instruction required an operand located in memory within the + last 7 words of memory, the DCU master would burst read 8 + words to update the data cache and cross over the + end-of-memory-range boundary. Such a DCU read would not be + answered by the DDR controller, resulting in a PLB4 time-out + and ultimately in a Machine Check interrupt. The data would + be inaccessible to the CPU. + + Workaround: + Forbid any application to access the last 256 bytes of DDR + memory. For example, make your operating system believe that + the last 256 bytes of DDR memory are absent. AMCC has a patch + that does this, available for Linux. + + This patch sets CFG_MEM_TOP_HIDE for the following 440EPx boards: + lwmon5, korat, sequoia + + The other remaining 440EPx board were intentionally not included + since it is not clear to me, if they use the end of ram for some + other purpose. This is unclear, since these boards have CONFIG_PRAM + defined and even comments like this: + + PMC440.h: + /* esd expects pram at end of physical memory. + * So no logbuffer at the moment. + */ + + It is strongly recommended to not use the last 256 bytes on those + boards too. Patches from the board maintainers are welcome. + + Signed-off-by: Stefan Roese + +commit c664bf8c3c9bb9e236891f0d8dfda883e86d159b +Author: Stefan Roese +Date: Thu Mar 27 10:09:05 2008 +0100 + + ppc4xx: Fix Canyonlands linker script (remove bogus ASSERT) + + Signed-off-by: Stefan Roese + +commit d56a3ce179688cde61073a3690e21703d68fafd7 +Author: Stefan Roese +Date: Tue Mar 25 17:51:13 2008 +0100 + + ppc4xx: Correctly pass phyiscal FLASH base address into dtb + + The routine ft_board_setup() configures the EBC NOR mappings for the + Linux physmap_of driver. Since on 460EX/GT we remap the FLASH from + 0x4.fc00.0000 to 0x4.cc00.0000 because of the max. 16MByte boot-CS + problem, we need to pass the corrected address here too. + + Signed-off-by: Stefan Roese + +commit 9ad31989de12ce5c67b07c4867ead47465655c4b +Author: Stefan Roese +Date: Wed Mar 19 16:35:12 2008 +0100 + + ppc4xx: Fix compilation warning in 4xx_enet.c + + Signed-off-by: Stefan Roese + +commit 4c9e855734c523900322a7c3cdd9099b4f51b51d +Author: Stefan Roese +Date: Wed Mar 19 16:20:49 2008 +0100 + + ppc4xx: Add AMCC Glacier 406GT eval board support + + This patch adds support for the AMCC Glacier 460GT eval board. + The main difference to the Canyonlands board are listed here: + + - 4 ethernet ports instead of 2 + - no SATA port + - no USB port + + Currently EMAC2+3 are not working. This will be fixed in a later + release. + + Signed-off-by: Stefan Roese + +commit d8bd643141af4710d7f1b69bbab6b760de0af0a1 +Author: Stefan Roese +Date: Thu Mar 27 08:47:26 2008 +0100 + + ppc4xx: Mask 'vec' with 0x1f in uic_interrupt() for bit set/clear + + Signed-off-by: Stefan Roese + +commit b9670dd85be6e0496ef2e231043c23cad9b1d903 +Author: Anatolij Gustschin +Date: Wed Mar 26 21:05:43 2008 +0100 + + Fix out of tree building issue + + Currently U-Boot building in some external directory + doesn't work. This patch tries to fix the problem. + + Signed-off-by: Anatolij Gustschin + +commit d4ee711d8a5c366ee3f857c26b927d12e66614ff +Author: Anatolij Gustschin +Date: Wed Mar 26 18:13:33 2008 +0100 + + README: update documentation (availability, links, etc.) + + Fix typo in README + + Signed-off-by: Anatolij Gustschin + +commit e813eae3bfeba9c0bda9d1bf9fc3d081f790972f +Author: Anatolij Gustschin +Date: Wed Mar 26 17:47:44 2008 +0100 + + Fix compilation error in cmd_usb.c + + This patch fixes compilation error + cmd_usb.c: In function 'do_usb': + cmd_usb.c:552: error: void value not ignored as it ought to be + + Signed-off-by: Anatolij Gustschin + +commit d8c82db482d6b535d12b419d6440b88bf7091c9b +Author: Timur Tabi +Date: Fri Mar 14 17:45:29 2008 -0500 + + Add support for setting the I2C bus speed in fsl_i2c.c + + Add support to the Freescale I2C driver (fsl_i2c.c) for setting and querying + the I2C bus speed. Current 8[356]xx boards define the CFG_I2C_SPEED macro, + but fsl_i2c.c ignores it and uses conservative value when programming the + I2C bus speed. + + Signed-off-by: Timur Tabi + Acked-by: Andy Fleming + +commit d049cc7f71c0d875e8f5099d1ed23666a82b8f8e +Author: Wolfgang Denk +Date: Thu Mar 27 00:03:57 2008 +0100 + + Coding style cleanup, update CHANGELOG + + Signed-off-by: Wolfgang Denk + commit fd0b1fe3c388a77e8fe00cdd930ca317a91198d4 Author: Dave Liu Date: Wed Mar 26 22:55:32 2008 +0800 @@ -100,6 +4087,202 @@ Date: Wed Mar 26 22:47:06 2008 +0800 Signed-off-by: Dave Liu +commit b9e749e95354f33eb5dc6653c6db7d502adb95fe +Author: Markus Klotzbuecher +Date: Wed Mar 26 18:26:43 2008 +0100 + + USB, Storage: fix a bug introduced in commit + f6b44e0e4d18fe507833a0f76d24a9aa72c123f1 that will cause usb_stor_info + to only print only information on one storage device, but not for + multiple. + + Signed-off-by: Markus Klotzbuecher + +commit 841e5edd1623f3fecb6bffc5c2f938ed7a947360 +Author: Anatolij Gustschin +Date: Wed Mar 26 17:47:44 2008 +0100 + + Fix compilation error in cmd_usb.c + + This patch fixes compilation error + cmd_usb.c: In function 'do_usb': + cmd_usb.c:552: error: void value not ignored as it ought to be + + Signed-off-by: Anatolij Gustschin + Signed-off-by: Markus Klotzbuecher + +commit dd6c910aadf27c822f17b87eae1a9bd0b2e3aa15 +Author: Kumar Gala +Date: Wed Mar 26 08:53:53 2008 -0500 + + 85xx: Add cpu_mp_lmb_reserve helper to reserve boot page + + Provide a board_lmb_reserve helper function to ensure we reserve + the page of memory we are using for the boot page translation code. + + Signed-off-by: Kumar Gala + +commit 79679d80021ab095e639e250ca472fe526da02e2 +Author: Kumar Gala +Date: Wed Mar 26 08:34:25 2008 -0500 + + 85xx: Update multicore boot mechanism to ePAPR v0.81 spec + + The following changes are needed to be inline with ePAPR v0.81: + + * r4, r5 and now always set to 0 on boot release + * r7 is used to pass the size of the initial map area (IMA) + * EPAPR_MAGIC value changed for book-e processors + * changes in the spin table layout + * spin table supports a 64-bit physical release address + + Signed-off-by: Kumar Gala + +commit 25eedb2c1958a13110c7de1fc809b624053cc69c +Author: Jon Loeliger +Date: Wed Mar 19 15:02:07 2008 -0500 + + FSL: Clean up board/freescale/common/Makefile + + Each file that can be built here now follows some + CONFIG_ option so that they are appropriately built + or not, as needed. And CONFIG_ defines were added + to various board config files to make sure that happens. + + The other board/freescale/*/Makefiles no longer need + to reach up and over into ../common to build their + individually needed files any more. + + Boards that are CDS specific were renamed with cds_ prefix. + + Signed-off-by: Jon Loeliger + +commit a5af4b358a7caa9c0aa374d4d894bf762ec37669 +Author: Kumar Gala +Date: Wed Feb 27 22:00:27 2008 -0600 + + 85xx: Fix merge duplication + + ft_fixup_cpu() got duplicated in some merge snafu. Remove the duplicate. + + Signed-off-by: Kumar Gala + +commit 5893b3d0a4084f87a06a5d3dc03db91206818941 +Author: James Yang +Date: Tue Feb 12 16:35:07 2008 -0600 + + 85xx: Expand CCSR space with more DDR controller registers. + + Signed-off-by: James Yang + Signed-off-by: Jon Loeliger + Signed-off-by: Kumar Gala + +commit a3e77fa5359b3f9f59e4e946b46d57a53057cc85 +Author: James Yang +Date: Fri Feb 8 18:05:08 2008 -0600 + + 85xx: Speed up get_ddr_freq() and get_bus_freq() + + get_ddr_freq() and get_bus_freq() used get_sys_info() each time they were + called. However, get_sys_info() recalculates extraneous information when + called each time. Have get_ddr_freq() and get_bus_freq() return memoized + values from global_data instead. + + Signed-off-by: James Yang + Signed-off-by: Kumar Gala + +commit e9ea679918fbc9a53fa2f2a904aac874ea736036 +Author: James Yang +Date: Fri Feb 8 16:46:27 2008 -0600 + + 85xx: Show DDR memory data rate in addition to the memory clock frequency. + + Show the DDR memory data rate in addition to the memory clock + frequency. For DDR/DDR2 memories the memory data rate is 2x the + memory clock. + + Signed-off-by: James Yang + Signed-off-by: Kumar Gala + +commit 591933ca6eabc440e6ed6967233aaf56fce464a3 +Author: James Yang +Date: Fri Feb 8 16:44:53 2008 -0600 + + 85xx: get_tbclk() speed up and rounding fix + + Speed up get_tbclk() by referencing pre-computed bus clock + frequency value from global data instead of sys_info_t. Fix + rounding of result to nearest; previously it was rounding + upwards. + + Signed-off-by: James Yang + Signed-off-by: Kumar Gala + +commit 1ced121600b2060ab2ff9f0fddd9421fd70a0dc6 +Author: Andy Fleming +Date: Wed Feb 6 01:19:40 2008 -0600 + + Update SVR numbers to expand support + + FSL has taken to using SVR[16:23] as an SOC sub-version field. This + is used to distinguish certain variants within an SOC family. To + account for this, we add the SVR_SOC_VER() macro, and update the SVR_* + constants to reflect the larger value. We also add SVR numbers for all + of the current variants. Finally, to make things neater, rather than + use an enormous switch statement to print out the CPU type, we create + and array of SVR/name pairs (using a macro), and print out the CPU name + that matches the SVR SOC version. + + Signed-off-by: Andy Fleming + +commit b83eef440cf3cef816172ccbb5897ccd8e403cf3 +Author: Andy Fleming +Date: Wed Feb 6 01:12:57 2008 -0600 + + Add the Freescale PCI device IDs + + Signed-off-by: Andy Fleming + +commit 7aff0c051ad0613171cf2b9941ee48675c62e7cd +Author: Kumar Gala +Date: Thu Feb 14 11:04:23 2008 -0600 + + 85xx: Added support for multicore boot mechanism + + Added the cpu command that provides a generic mechanism to get status, + reset, and release secondary cores in multicore processors. + + Added support for using the ePAPR defined spin-table mechanism on 85xx. + + Signed-off-by: Kumar Gala + Signed-off-by: Andy Fleming + +commit ec2b74ffd36f02c6123725e7c2533dd2deaf4b64 +Author: Kumar Gala +Date: Thu Jan 17 16:48:33 2008 -0600 + + 85xx: Added support for multicore boot mechanism + + Added the cpu command that provides a generic mechanism to get status, + reset, and release secondary cores in multicore processors. + + Added support for using the ePAPR defined spin-table mechanism on 85xx. + + Signed-off-by: Kumar Gala + +commit f69766e4b5d47ecd3aa58677a8da875694f364f2 +Author: Kumar Gala +Date: Wed Jan 30 14:55:14 2008 -0600 + + 85xx: Add the concept of CFG_CCSRBAR_PHYS + + When we go to 36-bit physical addresses we need to keep the concept of + the physical CCSRBAR address seperate from the virtual one. + + For the majority of boards CFG_CCSBAR_PHYS == CFG_CCSRBAR + + Signed-off-by: Kumar Gala + commit 5b5eb9ca5b778f763bcf332697b35cc1e747626e Author: Wolfgang Denk Date: Wed Mar 26 15:38:47 2008 +0100 @@ -1224,6 +5407,100 @@ Date: Mon Feb 4 14:10:01 2008 +0100 Signed-off-by: Dmitry Rakhchev +commit 3a5d1e7f1309998791702b2a559e3126781746b9 +Author: Yuri Tikhonov +Date: Tue Mar 18 13:33:30 2008 +0100 + + lwmon5: Fix register test logic to match the specific GDC h/w. + + Signed-off-by: Dmitry Rakhchev + Signed-off-by: Yuri Tikhonov + +commit 0f855a1f056a8c22116a2103a3900cbfb669df0b +Author: Yuri Tikhonov +Date: Tue Mar 18 13:27:57 2008 +0100 + + Fix backlight in the lwmon5 POST. + + Backlight was switcehd on even when temperature was too low. + + Signed-off-by: Dmitry Rakhchev + Signed-off-by: Yuri Tikhonov + +commit 2d991958b1e420fbfe17b128bd26ade74be5efcc +Author: Yuri Tikhonov +Date: Wed Feb 6 18:48:36 2008 +0100 + + The patch introduces the alternative configuration of the log buffer for + the lwmon5 board: the storage for the log-buffer itself is OCM(on-chip memory), + the log-buffer header is moved to six GPT registers (PPC440EPX_GPT0_COMP1, ..., + PPC440EPX_GPT0_COMP5). + + To enable this, alternative, configuration the U-Boot board configuration + file for lwmon5 includes the definitions of alternative addresses for header + (CONFIG_ALT_LH_ADDR) and buffer (CONFIG_ALT_LB_ADDR). + + The Linux shall be configured with the CONFIG_ALT_LB_LOCATION option set, + and has the BOARD_ALT_LH_ADDR and BOARD_ALT_LB_ADDR constants defined in the + lwmon5 board-specific header (arch/ppc/platforms/4xx/lwmon5.h). + + Signed-off-by: Yuri Tikhonov + +commit ff818b21b069f4bc9cb73373cc5a16014be101b7 +Author: Yuri Tikhonov +Date: Mon Feb 4 17:11:53 2008 +0100 + + Add support for the lwmon5 board reset via GPIO58. + + Signed-off-by: Dmitry Rakhchev + Signed-off-by: Yuri Tikhonov + +commit 603f194e5ad81bb2ef42d6d8aaa74de175bcb411 +Author: Yuri Tikhonov +Date: Mon Feb 4 17:09:55 2008 +0100 + + Some fixes to dspic, fpga, and gdc post tests for lwmon5. + Disable external watch-dog for now. + + Signed-off-by: Dmitry Rakhchev + Signed-off-by: Yuri Tikhonov + +commit e262efe35742c1ad4b0966ff501efc26f34a0aec +Author: Yuri Tikhonov +Date: Mon Feb 4 14:11:03 2008 +0100 + + The patch introduces the CRITICAL feature of POST tests. If the test + marked as POST_CRITICAL fails then the alternative, post_critical, + boot-command is used. If this command is not defined then U-Boot + enters into interactive mode. + + Signed-off-by: Dmitry Rakhchev + Signed-off-by: Yuri Tikhonov + +commit 65b20dcefc89618193fa51947968dada91e4c778 +Author: Yuri Tikhonov +Date: Mon Feb 4 14:10:42 2008 +0100 + + The patch adds new POST tests for the Lwmon5 board. + These are: + + * External Watchdog test; + * dsPIC tests; + * FPGA test; + * GDC test; + * Sysmon tests. + + Signed-off-by: Dmitry Rakhchev + Signed-off-by: Yuri Tikhonov + +commit 8dc3b2303d2b57c774b609ca0e7043ed8f9b88c1 +Author: Yuri Tikhonov +Date: Mon Feb 4 14:10:01 2008 +0100 + + Enable CODEC POST with CFG_POST_CODEC rather than with CFG_POST_DSP. + + Signed-off-by: Dmitry Rakhchev + commit 3515fd18d4e8e44f863ac7142b55e22b109e9af2 Author: Wolfgang Denk Date: Tue Mar 18 17:35:51 2008 +0100