X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=CHANGELOG;h=ba0c02a383778bc64ce27e3b05c6196db7892bdf;hb=8d2effea23e938631126a7888008a0637e13b389;hp=ce36c37c122e7a18a0ed0c5a9f9cd514083b9891;hpb=97f7d27c8ecf34879d6b747c10fa9a18c02a4cc0;p=u-boot diff --git a/CHANGELOG b/CHANGELOG index ce36c37c12..ba0c02a383 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -1,3 +1,29952 @@ +commit 3a76ab5c166d5956885f803ce975e7151cc0ca0e +Author: Wolfgang Denk +Date: Wed Jun 10 00:15:11 2009 +0200 + + rmu board: fix error: 'CONFIG_ENV_SECT_SIZE' undeclared + + Signed-off-by: Wolfgang Denk + +commit 165f9859b64ff59f0cfae3cc70a7e7ded7aaa4a7 +Author: Daniel Mack +Date: Thu Jun 4 19:44:12 2009 +0200 + + ubifs: fix small error path mismatch + + In do_readpage(), don't free 'dn' if its allocation failed. + + Signed-off-by: Daniel Mack + +commit de7cf709ebd3c01fbd094e8853dabb410c0370a1 +Author: Wolfgang Denk +Date: Thu Jun 4 00:31:07 2009 +0200 + + EP88x: fix broken linker script + + Signed-off-by: Wolfgang Denk + Tested-by: Mikhail Zaturenskiy + +commit 7a2063bd80d3b58b2dd5d5e58f4411f8d250576c +Author: Wolfgang Denk +Date: Fri May 15 00:16:02 2009 +0200 + + TQM85xx: minor config file cleanup + + Remove "saveenv" from "update" definition: the environment is outside + the U-Boot image on TQM85xx and therefor not affected by updates. + + Also "beautify" code a bit (vertical alignment). + + Signed-off-by: Wolfgang Denk + +commit c0296b1801fc9426d772fa75fe58458db605dfee +Author: Wolfgang Denk +Date: Fri May 15 00:16:01 2009 +0200 + + TQM85xx: adapt for new flash types + + Old TQM85xx boards had 'M' type Spansion Flashes from the S29GLxxxM + series while new boards have 'N' type Flashes from the S29GLxxxN + series, which have bigger sectors: 2 x 128 instead of 2 x 64 KB. + + We now change the configuration to the new flash types for all + boards; this also works on old boards - we just waste two flash + sectors for the environment which could be smaller there. + + Signed-off-by: Wolfgang Denk + +commit 6735104924f06340071a6914a9ee3345607fc102 +Author: Dave Liu +Date: Mon May 18 17:49:23 2009 +0800 + + 85xx: Fix the wrong SYS_CLK_IN for 8569MDS + + The SYS_CLK_IN of MPC8569MDS is 66.66MHz, + The DDR_CLK_IN is same with SYS_CLK_IN in 8569 processor. + so, change the SYS_CLK_IN from 66MHz to 66.66MHz. + + Signed-off-by: Dave Liu + +commit 16e7559c08b6f29db4596d795b92914c01e6a1b3 +Author: Dave Liu +Date: Fri May 15 10:27:44 2009 +0800 + + 85xx: Fix the wrong BCSR address of 8569MDS + + The BCSR17[7] = 1 will unlock the write protect of FLASH. + The WP# pin only controls the write protect of top/bottom sector, + That is why we can save env, but we can't write the first sector + before the patch. + + Signed-off-by: Dave Liu + +commit 90d13b8ac3d515349626d7c8a3dc34ef38c43fa6 +Author: Fredrik Arnerup +Date: Tue Jun 2 16:27:10 2009 -0500 + + 85xx: bugfix for reading maximum TLB size on mpc85xx + + The MAXSIZE field in the TLB1CFG register is 4 bits, not 8 bits. + This made setup_ddr_tlbs() try to set up a TLB larger than the e500 maximum + (256 MB) + which made u-boot hang in board_init_f() when trying to create a new stack + in RAM. + I have an mpc8540 with one 1GB dimm. + + Signed-off-by: Fredrik Arnerup + Signed-off-by: Andy Fleming + Acked-by: Kumar Gala + +commit 1b5291dddf5f16c7ae10e3cb165882fa96038b26 +Author: Dave Liu +Date: Fri Mar 27 14:32:43 2009 +0800 + + 85xx: Fix the clock adjust of mpc8569mds board + + Currently the clk_adj is 6 (3/4 cycle), The settings will cause + the DDR controller hang at the data init. Change the clk_adj + from 6 to 4 (1/2 cycle), make the memory system stable. + + Signed-off-by: Dave Liu + +commit faa14babd7466dfade358f9cac128ae246b9bf1b +Author: RONETIX - Ilko Iliev +Date: Fri Jun 5 16:54:31 2009 +0200 + + at91: fix a USB problem for AT91SAM9261 + + This patch corrects the missing PLLB initialization in usb_cpu_init() + for AT91SAM9261. + Because of the missing PLLB initialization, the USB support for all + AT91SAM9261 based boards will work only if the PLLB is configured by a + precedent bootloader. + + Signed-off-by: Ilko Iliev + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Bohmer + +commit 0c24dec550ddb7d86b8bfdd8645b18479f73e6e2 +Author: Felix Radensky +Date: Sun May 31 20:44:15 2009 +0300 + + ppc4xx/net: Fix MDIO clock setup + + This patch fixes MDIO clock setup in case when OPB frequency is 100MHz. + Current code assumes that the value of sysinfo.freqOPB is 100000000 + when OPB frequency is 100MHz. In reality it is 100000001. As a result + MDIO clock is set to incorrect value, larger than 2.5MHz, thus violating + the standard. This in not a problem on boards equipped with Marvell PHYs + (e.g. Canyonlands), since those PHYs support MDIO clocks up to 8.3MHz, + but can be a problem for other PHYs (e.g. Realtek ones). + + Signed-off-by: Felix Radensky + Signed-off-by: Ben Warren + +commit d65e34d12514de2bbe3b8f519761d641c081bad0 +Author: Yoshihiro Shimoda +Date: Wed Feb 25 14:27:29 2009 +0900 + + rtl8169: fix PCI system memory address + + When PCI device use system memory, some PCI host controller should be + set physical memory address. + + Signed-off-by: Yoshihiro Shimoda + Signed-off-by: Ben Warren + +commit ca9c8a1e10fac01e6a1129f82a7ce18bd818fa43 +Author: Manikandan Pillai +Date: Wed Apr 8 09:14:35 2009 +0530 + + SMC911x driver fixed for NFS boot + + eth_halt() function in the smc911x drivers used to call the + smc911x_reset() function. eth_halt() used to be called after + tftp transfers. This used to put the ethernet chip in reset + while the linux boots up resulting in the ethernet driver + not coming up. NFS boot used to fail as a result. + + This patch calls smc911x_shutdown() instead of smc911x_reset(). + Some comments received has also been fixed. + + Signed-off-by: Manikandan Pillai + Signed-off-by: Ben Warren + +commit e5a3bc2401a23f1890611f020f57f94824a534db +Author: Remy Bohmer +Date: Sun May 3 12:11:40 2009 +0200 + + Add config option for disabling DM9000-SROM support. + + Some boards do not have SROM support for the DM9000 network adapter. + Instead of listing these board names in the driver code, make this + option configurable from the board config file. + + It also removes a build warning for the at91sam9261ek board: + 'dm9000x.c:545: warning: 'read_srom_word' defined but not used' + + And it repaires the trizepsiv board build which was broken around the + same routines + + Signed-off-by: Remy Bohmer + Signed-off-by: Ben Warren + +commit 2c0234fa79122a5aa77c4e17c33eb2fe184b61a7 +Author: Daniel Mack +Date: Wed Apr 8 13:23:37 2009 +0200 + + smc911x: write back the manually set MAC address + + If the MAX address is given by the environment, write it back to the + hardware. + + Signed-off-by: Daniel Mack + Cc: Sascha Hauer + Signed-off-by: Ben Warren + +commit dfcd7f21607fd847236b04bb1a8d59a7c10ab99c +Author: Wolfgang Denk +Date: Fri May 15 00:16:03 2009 +0200 + + Redundant Environment: protect full sector size + + Several boards used different ways to specify the size of the + protected area when enabling flash write protection for the sectors + holding the environment variables: some used CONFIG_ENV_SIZE and + CONFIG_ENV_SIZE_REDUND, some used CONFIG_ENV_SECT_SIZE, and some even + a mix of both for the "normal" and the "redundant" areas. + + Normally, this makes no difference at all. However, things are + different when you have to deal with boards that can come with + different types of flash chips, which may have different sector + sizes. + + Here we may have to chose CONFIG_ENV_SECT_SIZE such that it fits the + biggest sector size, which may include several sectors on boards using + the smaller sector flash types. In such a case, using CONFIG_ENV_SIZE + or CONFIG_ENV_SIZE_REDUND to enable the protection may lead to the + case that only the first of these sectors get protected, while the + following ones aren't. + + This is no real problem, but it can be confusing for the user - + especially on boards that use CONFIG_ENV_SECT_SIZE to protect the + "normal" areas, while using CONFIG_ENV_SIZE_REDUND for the + "redundant" area. + + To avoid such inconsistencies, I changed all sucn boards that I found + to consistently use CONFIG_ENV_SECT_SIZE for protection. This should + not cause any functional changes to the code. + + Signed-off-by: Wolfgang Denk + Cc: Paul Ruhland + Cc: Pantelis Antoniou + Cc: Stefan Roese + Cc: Gary Jennejohn + Cc: Dave Ellis + Acked-by: Stefan Roese + +commit b81830f6e3b3e6ed114d071eb107965e49fa9b5a +Author: Ilya Yanok +Date: Thu May 14 14:03:09 2009 +0400 + + mmc: it's safe to ignore mmc_send_if_cond() return value + + Return value of mmc_send_if_cond() can be safely ignored (as it is + done in Linux). This makes older cards work with MXC MCI controller. + + Signed-off-by: Ilya Yanok + +commit dba6fcf6517faa5dda7df8109febe03c9c72a6f5 +Author: Stefan Roese +Date: Mon May 11 15:54:13 2009 +0200 + + cfi_mtd: Fix bug in last sector detection + + This patch now enabled this cfi-mtd wrapper to correctly detect and + erase the last sector in an NOR FLASH device. + + Signed-off-by: Stefan Roese + +commit 4e3d89ba948eef801ffd46ef862cdede5b3f8320 +Author: Yauhen Kharuzhy +Date: Thu May 7 00:43:30 2009 +0300 + + mmc: Fix decoding of SCR & function switch data on little-endian machines + + SCR & switch data are read from card as big-endian words and should be + converted to CPU byte order. + + Signed-off-by: Yauhen Kharuzhy + Signed-off-by: Andy Fleming + +commit f33cb34b3971dabe3720d577b0e1b8601c09fe17 +Author: Yauhen Kharuzhy +Date: Thu May 7 13:08:53 2009 +0300 + + mmc: Remove return from mmc_init for non SD 2.0 compatible cards. + + Cards which are not compatible with SD 2.0 standard, may return response + for CMD8 command, but it will be invalid in terms of SD 2.0. We should + accept this case as admissible, just like Linux does. + + Signed-off-by: Yauhen Kharuzhy + Signed-off-by: Andy Fleming + +commit 998be3dd59ed0af4bec38324047fecfa88ac45db +Author: Rabin Vincent +Date: Sun Apr 5 13:30:56 2009 +0530 + + mmc: drop unnecessary casts + + Now that response is a uint, we can drop all the casts. + + Signed-off-by: Rabin Vincent + +commit 0b453ffe28bb9227d86ddbe0893bd19c93f04ed7 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:55 2009 +0530 + + mmc: fix response decoding on little endian + + The mmc code defines the response as an array of chars. However, it + access the response bytes both as (i) an array of four uints (with + casts) and (ii) as individual chars. The former case is used more + often, including by the driver when it assigns the response. + + The char-wise accesses are broken on little endian systems because they + assume that the bytes in the uints are in big endian byte order. + + This patch fixes this by changing the response to be an array of four + uints and replacing the char-wise accesses with equivalent uint-wise + accesses. + + Signed-off-by: Rabin Vincent + +commit 9b1f942c09dd942e6de3185caa81c111b14de567 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:54 2009 +0530 + + mmc: use lldiv to fix arm eabi build + + The generic MMC core uses direct long long divisions, which do not build + with ARM EABI toolchains. Use lldiv() instead, which works everywhere. + + Signed-off-by: Rabin Vincent + +commit e85649c7e683faea1ccfddc9fa9abc62f38e4201 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:53 2009 +0530 + + mmc: check find_mmc_device return value + + find_mmc_device returns NULL if an invalid device number is specified. + Check for this to avoid dereferencing NULL pointers. + + Signed-off-by: Rabin Vincent + +commit ac0865ff33870cdf2cd480165045e1bc311e9fa2 +Author: Rabin Vincent +Date: Sun Apr 5 13:30:52 2009 +0530 + + mmc: clean up help texts + + Remove some repeated words and superfluous newlines in the mmc command + help entries. + + Signed-off-by: Rabin Vincent + +commit 7d6900ebe16d679c0e03f8d1584b64057a64ce39 +Author: Mike Frysinger +Date: Fri May 29 17:01:48 2009 -0400 + + Blackfin: spi: fix pin handling of SPI0 SSEL4 + + CS4 on SPI0 has a dedicated PH8 pin which needs to be enabled as a + peripheral in order to work. + + Signed-off-by: Mike Frysinger + +commit 2157359dad2533987f5eb0181ef543693fad6a33 +Author: Mike Frysinger +Date: Tue May 26 02:51:57 2009 -0400 + + Blackfin: fix if() logic in bootrom evt1 check + + A missing set of parenthesis caused the silicon revision to apply only to + the BF533 and not the BF531/BF532 variants. + + Signed-off-by: Mike Frysinger + +commit 76b5883da2cf049cd410901c04ea450e5f5c27c3 +Author: Stefan Roese +Date: Sat May 16 12:04:22 2009 +0200 + + jffs2/mtdparts: Fix problem with usage from JFFS2 and MTDPARTS together + + Currently using JFFS2 with MTDPARTS enabled doesn't work. This is because + mtdparts_init() is available in both files, cmd_mtdparts.c and + cmd_jffs2.c. Please note that in the original cmd_jffs2.c file (before + the jffs2/mtdparts command/file split those 2 different versions + already existed. So this is nothing new. The main problem is that the + variables "current_dev" and "current_partnum" are declared in both + files now. This doesn't work. + + This patch now changes the names of those variable to more specific + names: "current_mtd_dev" and "current_mtd_partnum". This is because + this patch also changes the declaration from static to global, so + that they can be used from both files. + + Please note that my first tests were not successful. The MTD devices + selected via mtdparts are now accessed but I'm failing to see the + directory listed via the "ls" command. Nothing is displayed. Perhaps + I didn't generate the JFFS2 image correctly (I never used JFFS2 in + U-Boot before). Not sure. Perhaps somebody else could take a look at + this as well. I'll continue looking into this on Monday. + + Signed-off-by: Stefan Roese + Cc: Wolfgang Denk + Cc: Detlev Zundel + Cc: Ilya Yanok + Cc: Renaud barbier + +commit ab687907980fa28940a1a992d3f1c5d17cdbbf5d +Author: Graf Yang +Date: Sun May 24 02:34:34 2009 -0400 + + Blackfin: bf518f-ezbrd: setup portmux for async flash + + The pins for async memory where parallel flash lives are not enabled by + default, so make sure we mux them as needed. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + +commit f40f6db278f602b55820693634a7256b0b4e4b80 +Author: Stefan Roese +Date: Wed May 20 10:58:03 2009 +0200 + + nand: Fix problem with ECC ordering for PPC4xx NDFC platforms + + This patch enables Smart Media (SMC) ECC byte ordering which is used + on the PPC4xx NAND FLASH controller (NDFC). Without this patch we have + incompatible ECC byte ordering to the Linux kernel NDFC driver. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 399aab7748bef053d59612211e1bd7a3fabfce18 +Author: Stefan Roese +Date: Wed May 20 10:58:02 2009 +0200 + + ppc4xx: Fix problem with ECC ordering for PPC4xx NDFC platforms + + This patch now uses the correct ECC byte order (Smart Media - SMC) + to be used on the 4xx NAND FLASH driver. Without this patch we have + incompatible ECC byte ordering to the Linux kernel NDFC driver. + + Please note that we also have to enable CONFIG_MTD_NAND_ECC_SMC in + drivers/mtd/nand/nand_ecc.c for correct operation. This is done with + a seperate patch. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 5d841fac8249a2b3f9a814da2140132be0a9f60d +Author: Stefan Roese +Date: Wed May 20 10:58:01 2009 +0200 + + ppc4xx: Move definition for PPC4xx NAND FLASH controller to header + + This patch moves the definition for the PPC4xx NAND FLASH controller + (NDFC) CONFIG_NAND_NDFC into include/ppc4xx.h. This is needed for the + upcoming fix for the ECC byte ordering of the NDFC driver. + + Signed-off-by: Stefan Roese + Acked-by: Scott Wood + +commit 2df72b82bc9e17b88dc82735a067749220beb025 +Author: Kim Phillips +Date: Tue May 19 12:53:36 2009 -0500 + + common: fix inline--weak error spotted by gcc 4.4 + + cmd_ide.c:547: error: inline function 'ide_inb' cannot be declared weak + + removing the inline attribute fixes it. + + Signed-off-by: Kim Phillips + +commit 9fd9abedcc3c10cf89353265cbe05f58609d51f3 +Author: Kim Phillips +Date: Tue May 19 12:53:32 2009 -0500 + + TQM834x: remove defines causing gcc4.4 warnings + + Configuring for TQM834x board... + cpu_init.c: In function 'cpu_init_f': + cpu_init.c:262: warning: array subscript is above array bounds + cpu_init.c:263: warning: array subscript is above array bounds + cpu_init.c:270: warning: array subscript is above array bounds + ... + + Signed-off-by: Kim Phillips + +commit 0850301747228a3327f2815a85284d26ade3de95 +Author: Andreas Huber +Date: Tue May 19 11:06:30 2009 +0200 + + UBI: fix return code in ubi_volume_read + + Return -ENODEV instead of 0 when trying to read from a non existing volume. + + Signed-off-by: Andreas Huber + Signed-off-by: Stefan Roese + +commit ec01481ddc4cf302c7f6d760b776ca94819ec21e +Author: Graf Yang +Date: Tue May 19 04:40:08 2009 -0400 + + Blackfin: fix timer_init()/timer_reset() + + The timer_init() function was not using the right csync instruction, nor + was it doing it right after disabling the core timer. + + The timer_reset() function would reset the timestamp, but not the actual + timer, so there was a common edge case where get_timer() return a jump of + one timestamp (couple milliseconds) right after resetting. This caused + many functions to improperly timeout right away. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + +commit c06326c73bf90e48a8e1cf8893ad31c575423f50 +Author: Shinya Kuribayashi +Date: Sat May 16 09:12:09 2009 +0900 + + MIPS: lib_mips/board.c: Remove unused variables + + This fixes the following build warnings: + + board.c: In function 'board_init_r': + board.c:328: warning: unused variable 'i' + board.c:326: warning: unused variable 'e' + + Signed-off-by: Shinya Kuribayashi + +commit 47f6a36cc3f3427cc8e4f1d0f3e6678be6f33769 +Author: Shinya Kuribayashi +Date: Sat May 16 09:12:09 2009 +0900 + + MIPS: Make all extern-ed functions in bitops.h static + + All these functions are expected to be static inline-ed. + This patch also fixes the following build warnings on MIPS targets: + + include/asm/bitops.h: In function 'ext2_find_next_zero_bit': + include/asm/bitops.h:862: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static + include/asm/bitops.h:885: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static + include/asm/bitops.h:887: warning: '__fswab32' is static but used in inline function 'ext2_find_next_zero_bit' which is not static + + Signed-off-by: Shinya Kuribayashi + +commit 87423d740b91329b8d1d0b73cafd6930993b558a +Author: Thomas Lange +Date: Fri Apr 24 16:22:16 2009 +0200 + + MIPS: Implement ethernet halt for au1x00 + + Implement ethernet halt() by putting MAC0 in reset. + If we do not do this, we will get memory corruption + when ethernet frames are received during early OS boot. + + Signed-off-by: Thomas Lange + Signed-off-by: Shinya Kuribayashi + +commit a2e0ffcf2d9a22c582a93e84a4bef20fd3877f47 +Author: Wolfgang Denk +Date: Fri May 15 23:29:23 2009 +0200 + + Prepare v2009.06-rc2 + + Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit f4317ea91942f44cc1c433277927b61618e9b0a5 +Author: Daniel Mack +Date: Tue May 5 12:48:29 2009 +0200 + + ARM: fix PXA build by defining UP2OCR + + U-Boot does not currently build for PXA platforms with USB support + enabled: + + usb.c:46: error: 'UP2OCR' undeclared (first use in this function) + + Signed-off-by: Daniel Mack + Cc: Markus Klotzbuecher + + Edited commit message. + Signed-off-by: Wolfgang Denk + +commit e26ad0eabd10a8cda51920fbcfe4da5b4ccf0c98 +Author: Wolfgang Denk +Date: Fri May 15 22:32:57 2009 +0200 + + Minor Coding Style fix; update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit af75a45d23b72a59ac5cc0427696c7f634fdc94b +Author: Wolfgang Denk +Date: Fri May 15 09:27:58 2009 +0200 + + IDE: bail out of dev_print() for unknown device types + + Commit 574b319512 introduced a subtle bug by mixing a list of tests + for "dev_desc->type" and "dev_desc->if_type" into one switch(), which + then mostly did not work because "dev_desc->type" cannot take any + "IF_*" type values. A later fix in commit 8ec6e332ea changed the + switch() into testing "dev_desc->if_type", but at this point the + initial test for unknown device types was completely lost, which + resulted in output like that for IDE ports without device attached: + + Device 1: Model: Firm: Ser#: + Type: # 1F # + Capacity: not available + + This patch re-introduces the missing test for unknown device types. + + Signed-off-by: Wolfgang Denk + Cc: Stefan Roese + Cc: Detlev Zundel + Tested-by: Stefan Roese + +commit c21f62d8483fbab44cd98d93ff2e9355a330d225 +Author: Stefan Roese +Date: Thu May 14 07:25:13 2009 +0200 + + 74xx_7xx: Fix rounding problem in CPU frequency calculation + + This patch fixes a problem in the CPU frequency calculation. Without it + a 798MHz CPU is displayed as 368.503 MHz. And with it it's 798 MHz. + + Signed-off-by: Stefan Roese + +commit 3ad8a0517b724782ab36f2b554a94de4c00c1adb +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed May 13 22:24:12 2009 +0200 + + console.h: remove unused prototype 'console_realloc' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 84bf7ca522e94ec402a1264b01971b924b7e268f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Wed May 13 22:16:31 2009 +0200 + + api: remove un-needed ifdef CONFIG_API already handle by the Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 792a09eb9d5d8c4f74b7e9f2e887316d511a4e80 +Author: Detlev Zundel +Date: Wed May 13 10:54:10 2009 +0200 + + Fix e-mail address of Gary Jennejohn. + + Signed-off-by: Detlev Zundel + +commit 5e2c08c3ac90808e9be64856916bfd6df984823c +Author: Emil Medve +Date: Tue May 12 13:48:32 2009 -0500 + + Remove inline qualifier from show_boot_progress() + + The 'inline' is conflicting with the semantic of 'weak' attribute and with the + way the show_boot_progress() function is used. + + Also gcc 4.4 is complaining about it: + + main.c:51: error: inline function 'show_boot_progress' cannot be declared weak + + Signed-off-by: Emil Medve + +commit fe6da4837308aa33d537ac3e7f36c2d66e3d9a36 +Author: Wolfgang Denk +Date: Tue May 12 15:17:35 2009 +0200 + + MPC8260: fixup device tree by property instead of path + + cpu/mpc8260/cpu.c used to use do_fixup_by_path_u32() to update the + clock frequencies in the device tree, using a CPU path + "/cpus/OF_CPU", with OF_CPU beind defined in the board config file. + + However, this does not work when one board config file (here: + MPC8260ADS.h) is intended to be used for several diffrent CPUs and + therefor contains a generic definition like "cpu@0", as the device + trees that will then be loaded will contain specific names like + "PowerPC,8272@0". + + We switch to using do_fixup_by_prop_u32() instead, so we can search + for device_type="cpu", as it is done in other architectures, too. + + Signed-off-by: Wolfgang Denk + Cc: Heiko Schocher + Acked-by: Heiko Schocher + Tested-by: Heiko Schocher + +commit 12a6753155716e5c3c181a8f40e8b2d3d669aefd +Author: Rohit Hagargundgi +Date: Mon Mar 9 19:45:46 2009 +0530 + + Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN + + Add CONFIG_SYS_MONITOR_LEN macro to apollon board config. + CONFIG_SYS_MONITOR_LEN defines the U-Boot image size. + and is used by OneNAND ipl when reading U-Boot image. + + Signed-off-by: Rohit Hagargundgi + Acked-by: Kyungmin Park + +commit c404cc5884b0c82fd82d751dbd8e8b3f8919a23a +Author: Ben Warren +Date: Tue Apr 28 17:04:51 2009 -0700 + + Schedule removal of non-CONFIG_NET_MULTI net driver API + + This will make CONFIG_NET_MULTI the only net driver configuration and + we'll be able to remove this option. + + Signed-off-by: Ben Warren + +commit 60bbcf0cc6e55095dd186e59a557d584b9b56eb1 +Author: Detlev Zundel +Date: Tue May 5 16:04:06 2009 +0200 + + powerpc/inka4x0: Remove left-over ide reset code. + + The pin which was used in preliminary versions of the board for ide + reset is really connected to the rtc clock. + + Signed-off-by: Detlev Zundel + +commit f578a2da6770951239ad91ee9a1875fdc71dbe48 +Author: Marco Stornelli +Date: Tue Apr 28 19:04:02 2009 +0200 + + Add imls utility command + + This patch adds, under tools folder, a new command called imls. Its + goal is the same of UBoot's imls but it can be used as Linux shell + command. It reads from raw mtd partition and prints the list of the + stored images. + + Signed-off-by: Marco Stornelli + +commit da95427ce431908714ae5e9f663ee6e2bc3bcc33 +Author: Heiko Schocher +Date: Tue Apr 28 08:36:11 2009 +0200 + + netloop: updates for NetLoop + + Fix some issues introduced from commit: + 2f70c49e5b9813635ad73666aa30f304c7fdeda9 + suggested by Mike Frysinger. + + - added some comment for the env_id variable in common_cmd_nvedit.c + - moved some variables in fn scope instead of file scope + - NetInitLoop now static void + + Signed-off-by: Heiko Schocher + Acked-by: Ben Warren + +commit 3c1d89545de11822f8b5afb5646a57757620bd95 +Author: Heiko Schocher +Date: Tue Apr 28 07:48:39 2009 +0200 + + 82xx, ids8247: added ids8247 board to MAKEALL script + + Signed-off-by: Heiko Schocher + +commit 890a017a8a995c921d1e889d360e8d6538ceecfe +Author: Detlev Zundel +Date: Thu May 7 13:08:55 2009 +0200 + + arm/imx31_phycore: Fix bi_arch_number + + Signed-off-by: Detlev Zundel + Cc: Sascha Hauer + +commit ee47bfabefeb25bdfc83f49ef3bae0f325d3e69e +Author: Sascha Hauer +Date: Fri May 15 10:21:33 2009 +0200 + + remove myself as phycore/litekit Maintainer + + I never acked a patch that adds me as phycore i.MX31 maintainer nor was + it me who pushed the patches, so remove myself from the maintainer list + so that other people do not longer wait for my ack. + + Signed-off-by: Sascha Hauer + +commit c63254ef5628efe1c77cb2fdba20753f9666f55d +Author: Sergey Lapin +Date: Tue May 12 12:25:14 2009 +0400 + + AFEB9260 network fix + + AFEB9260 uses PA10, PA11 for ETX2 and ETX3. + Also, due to extarnal pull-up on IRQ line, Micrel PHY ID is 1 after reset sequence, + not 0. + + Signed-off-by: Sergey Lapin + +commit f8ddcd58221cab63dd25c2324dd2032487f748b1 +Author: Graf Yang +Date: Tue May 5 02:26:27 2009 -0400 + + Blackfin: bf518f-ezbrd: reset ethernet PHY during init + + We don't know what state the ethernet PHY is in when starting up, so make + sure we set it to a sane state. This fixes troubles seen when Linux boots + up, configures the PHY is a non-default state, and then the system reboots + into U-Boot which previously expected a reset state only. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + +commit 53310b88eaa27fb5cb83144d0b22389190ad87a1 +Author: Mike Frysinger +Date: Tue May 5 01:35:41 2009 -0400 + + Blackfin: bf527-ezkit: fix SPI flash env params + + The BF527-EZKIT settings for storing the environment in SPI flash wasn't + using the correct sector settings for the SPI flash part that is actually + on the board. + + Signed-off-by: Mike Frysinger + +commit f58bf804a14324c6c9186a7a664fa23281780e8b +Author: Mike Frysinger +Date: Fri Apr 24 23:54:19 2009 -0400 + + Blackfin: avoid get_sclk() with early serial debug + + When the clock functions were changed to use cached values (and thereby + avoiding expensive math functions), early serial debug broke because the + baud programming is called before external memory is available. + + Signed-off-by: Mike Frysinger + +commit 02778f2f1b4b1a28b492367477db27c58d45ae35 +Author: Mike Frysinger +Date: Fri Apr 24 23:39:41 2009 -0400 + + Blackfin: fix booting with older bootroms (no EVT1) + + When dropping jump block support, the assumption was that all bootroms + supported entry point redirection via the EVT1 register. Unfortunately, + this turned out to be incorrect for the oldest Blackfin parts (BF533-0.2 + and older and BF561). No one really noticed earlier because these parts + usually are booted by bypassing the bootrom entirely, and older BF533 + parts are not supported at all (too many anomalies). + + Signed-off-by: Mike Frysinger + +commit af2c37378f203857d5e6c957e77a14c2da5b59d2 +Author: Mike Frysinger +Date: Fri Apr 24 23:22:48 2009 -0400 + + Blackfin: recurse with early serial initcode + + Make sure we recurse through serial_putc() rather than bang on the UART + transmit register directly to avoid hardware overflows when using \n. + + Signed-off-by: Mike Frysinger + +commit 6b8edfde22acc574b5532e9f086e6a7287a9bc78 +Author: Wolfgang Denk +Date: Fri May 1 21:59:12 2009 +0200 + + Prepare v2009.06-rc1 + + Update CHANGELOG. + + Signed-off-by: Wolfgang Denk + +commit 6b2beb5626a143ca5347e7d2c6005be9936c1fbb +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri May 1 15:38:06 2009 +0200 + + at91: remove lowlevel_init.S + + lowlevel_init.S is not used any more so remove it. + As consequence, we also don't have to generate u-boot.lds + but can use a static version as before. + + This also fixes the out-of-tree build problem introduced + with commit f0a2c7b4 "at91: add support for the PM9263 board" + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Wolfgang Denk + +commit 0ee7a310479640ef17ce2fc0f6c13cf7961d2330 +Author: Wolfgang Denk +Date: Fri May 1 00:16:11 2009 +0200 + + Update CHANGELOG; minor coding style cleanup. + + Signed-off-by: Wolfgang Denk + +commit d3a513c23ba4100d6983161cdc1f747dfd087bbd +Author: Manikandan Pillai +Date: Tue Apr 21 17:29:05 2009 +0200 + + OMAP3: Fix timer handling to 1ms and CONFIG_SYS_HZ to 1000 + + Signed-off-by: Dirk Behme + Signed-off-by: Manikandan Pillai + +commit ac9140037a84629c5583066ff1a177396c47d89d +Author: Dirk Behme +Date: Fri Apr 17 14:27:56 2009 +0200 + + OMAP3: Beagle: Set pinmux conditionally for Rev C boards + + The Beagle Rev C boards pull UART2 from an alternate set of balls. + + Signed-off-by: Steve Sakoman + Signed-off-by: Dirk Behme + +commit c1a0fd5f2864e9d381f4a3dc948942cac974e89a +Author: Ricardo Ribalda Delgado +Date: Mon Apr 27 18:33:33 2009 +0200 + + ubifs: BUG: Blocks commpressed with zlib + + Blocks compressed with zlib dont have the full gzip header. + + Without this patch, block compressed with zlib cannot be readed! + + Signed-off-by: Ricardo Ribalda Delgado + +commit 35f6a943f7d92145d607c1d55f5c2e2eae5be630 +Author: Ricardo Ribalda Delgado +Date: Mon Apr 27 18:33:32 2009 +0200 + + lib_generic: gunzip: New function zunzip + + Separate gunzip in + + gunzip: Find the end of the header and call zunzip. + zunzip: Inflate gunzip block without header. + + UBI fs blocks can be compresed in lzo, zlib or no-compression. The + current implementation of u-boot supported all the compressions but + there was a bug in the implementation of the zlib blocks. + + UBIFS's Zlib blocks do not have header but they were compressed using + gunzip, a function used to decompress gunzip files/sectors with a + header. + + This patch adds a new function zunzip that uncompress a zlib block with + no header. + + Signed-off-by: Ricardo Ribalda Delgado + +commit a1e5f93185d0d85a4b3fad3b6c743cddcd373b0c +Author: Daniel Gorsulowski +Date: Thu Apr 23 15:37:16 2009 +0200 + + at91: fixed plla calc when no USB support is active + + Signed-off-by: Daniel Gorsulowski + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 3791a1187c1401c33c9512595e6e89dbb46230c5 +Author: Ladislav Michl +Date: Wed Apr 22 01:12:04 2009 +0200 + + arm925t: Fix CONFIG_SYS_HZ to 1000 + + Let CONFIG_SYS_HZ to have value of 1000 effectively fixing all users of + get_timer. + + Changes since original version: + * Set PTV=2 (divisor 8) for boards using 12MHz timer clock source to + improve timer resolution. + + Signed-off-by: Ladislav Michl + +commit 42bf4b2248146abdc592bde0009c6ea42067f437 +Author: Dirk Behme +Date: Tue Apr 14 20:15:17 2009 +0200 + + OMAP3: Remove legacy NAND defines + + Remove remaining legacy NAND defines for Beagle, EVM, Overo and Pandora. + + Signed-off-by: Dirk Behme + +commit cba0b778dd5f1ea32959b6825c7f0a31501a99d5 +Author: Sanjeev Premi +Date: Mon Apr 27 21:27:54 2009 +0530 + + OMAP3: Print correct silicon revision + + The function display_board_info() displays incorrect + silicon revision - based on the return value from + function get_cpu_rev(). + + This patch fixes the problem. + + Signed-off-by: Sanjeev Premi + +commit 90006e9b33bcdbf241b0295d186e3634137907a9 +Author: Sanjeev Premi +Date: Mon Apr 27 21:27:44 2009 +0530 + + OMAP3: Remove unused board-types + + The board-types defined in struct omap3_sysinfo seem to be + unused. The function display_board_info() is passed + board type as an argument; which is ignored. + + This patch removes all uses of board-type, related definitions + and functions. + + Signed-off-by: Sanjeev Premi + +commit 6a6b62e3aa4b340c4f8fc67b1487ddb5436c684d +Author: Sanjeev Premi +Date: Mon Apr 27 21:27:27 2009 +0530 + + OMAP3: Use functions print_cpuinfo() and checkboard() + + Use the functions print_cpuinfo() and checkboard() to + display the cpu and board specific information. + + These functions reuse content from the existing function + display_board_info() - which has been removed. + + Also, updated the existig OMAP3 configurations to + define: + - CONFIG_DISPLAY_CPUINFO + - CONFIG_DISPLAY_BOARDINFO + + Signed-off-by: Sanjeev Premi + +commit f8e2b3107ee00f2782f8ebf47e3f09cda4e2353a +Author: Stefan Roese +Date: Wed Mar 18 11:17:37 2009 +0100 + + MTD: Change cfi-mtd to accept non-uniform sector sizes + + With this patch non-uniform NOR FLASH chips (chips with multiple erase + regions) can be exported via the cfi-mtd layer and therefor used by UBI. + We select the largest sector size as erasesize. The cfi driver will make + sure that the smaller sectors are handled correctly. + + Signed-off-by: Stefan Roese + +commit 3dcbe628d66b648e954bc8147d4faff2983206d9 +Author: Anatolij Gustschin +Date: Thu Apr 23 12:35:22 2009 +0200 + + video: fix bug in cfb_console.c code + + Fix bug in drawing long version/info strings: + U-Boot version string like + "U-Boot 2009.03-05647-g7c51e06 (Apr 23 2009 - 12:40:00) MPC83XX" + is long and doesn't wrap around correctly while drawing + beside the logo. Such long strings partially overwrite + the logo. This patch is an attempt to fix it. + + Signed-off-by: Anatolij Gustschin + +commit 4d9eab89b3b2c2ed432b14d355a56f274d8aac75 +Author: Wolfgang Denk +Date: Tue Apr 28 08:50:31 2009 +0200 + + cmd_ext2.c: fix compile warnings + + Get rid of these warnings: + + cmd_ext2.c:247: warning: format '%ld' expects type 'long int', but argument 2 has type 'int' + cmd_ext2.c:248: warning: format '%lX' expects type 'long unsigned int', but argument 3 has type 'int' + + Signed-off-by: Wolfgang Denk + +commit 28afe0160f87ff74574150d703055a965f91422a +Author: Heiko Schocher +Date: Mon Apr 27 10:48:20 2009 +0200 + + ids8247: Remove legacy NAND defines + + because legacy NAND support is deprecated converting to current + NAND interface. !This just compile, because I have no more the + hardware to test it. + + Signed-off-by: Heiko Schocher + +commit dbd33614404b65aa441c5620c3dbd560c4460c09 +Author: Ricardo Ribalda Delgado +Date: Mon Apr 27 09:13:31 2009 +0200 + + ubifs: BUG realpath string must be ended with NULL + + If the memory used to copy the link_make is "dirty" the string wont + be ended with NULL, throwing out multiple memory bugs. + + Signed-off-by: Ricardo Ribalda Delgado + Acked-by: Stefan Roese + +commit 65351a8793c51f3787efbbcf3aa1df0ad543c127 +Author: Peter Tyser +Date: Fri Apr 24 15:59:56 2009 -0500 + + bmp_logo: Check return value of fread() + + Add basic error handling to fread() function calls. This prevents + compililation warnings such as: + + bmp_logo.c: In function ‘main’: + bmp_logo.c:71: warning: ignoring return value of ‘fread’, declared with + attribute warn_unused_result + ... + + Signed-off-by: Peter Tyser + +commit eea8be86d1c2b570660d1f6c553845e13164231a +Author: Peter Tyser +Date: Fri Apr 24 15:59:46 2009 -0500 + + ncb: Check return value of write() + + This prevents the compilation warning: + + ncb.c: In function 'main': + ncb.c:32: warning: ignoring return value of ‘write’, declared with + attribute warn_unused_result + + Signed-off-by: Peter Tyser + +commit dbe29e36a4c2775b69b5a63b0ce2bac89c08e691 +Author: Stefan Roese +Date: Fri Apr 24 15:59:35 2009 +0200 + + mtd: nand/onenand: Register mtd device upon device scanning + + With this patch the NAND and OneNAND devices are registered in the MTD + subsystem and can then be referenced by the mtdcore code (e.g. + get_mtd_device_nm()). This is needed for the new "ubi part" command + syntax without the flash type parameter (nor|nand|onenand). + + Signed-off-by: Stefan Roese + +commit 10bb62d85a0850dbad1fdd34123378686373f166 +Author: Stefan Roese +Date: Fri Apr 24 15:58:33 2009 +0200 + + mtd: nand: Include linux/mtd/partitions.h in nand_base.h + + This patch removes this compilation warning when CONFIG_MTD_PARTITIONS is + defined: + + nand_base.c: In function 'nand_release': + nand_base.c:2922: warning: implicit declaration of function 'del_mtd_partitions' + + Signed-off-by: Stefan Roese + +commit 2d579e5060413af5a740cb396dc87e1ff31bf5a9 +Author: Stefan Roese +Date: Fri Apr 24 20:24:19 2009 +0200 + + ubi: Remove flash selection parameter (nor|nand|onenand) from "ubi part" + + This patch removes the now unnecessary flash type parameter from the + "ubi part" command. Currently the user has to define the type of flash + he will be using UBI on. Example: + + => ubi part nor partition1 + + With this patch this type parameter is not needed anymore. The user can + now select the partition directly without the flash type paramter. + Example: + + => ubi part partition1 + + This breaks backward compatibility right now because of the change in the + command syntax. But UBI support is still quite fresh and the advantage of + this new command is syntax big enough for this change. Additionally the + code is much cleaner now. + + Signed-off-by: Stefan Roese + CC: Kyungmin Park + +commit 294f10ca9ea82a15e135dcb0fc658382ab206940 +Author: Detlev Zundel +Date: Thu Apr 23 13:14:20 2009 +0200 + + mips/vcth: Use generic 16550 uart driver + + As the common code also handles baudrate switching, which the board + specific vct.c driver did not support, this is one of the rare + occassions where deleting code actually adds a feature :) + + Signed-off-by: Detlev Zundel + Acked-by: Stefan Roese + Acked-by: Shinya Kuribayashi + +commit 0c8a84916c5dacccdc5b27b63fc463e9f3b04f07 +Author: Ladislav Michl +Date: Tue Apr 21 02:26:31 2009 +0200 + + Separate mtdparts command from jffs2 + + On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote: + > Currently the mtdparts commands are included in the jffs2 command support. + > This doesn't make sense anymore since other commands (e.g. UBI) use this + > infrastructure as well now. This patch separates the mtdparts commands from + > the jffs2 commands making it possible to only select mtdparts when no JFFS2 + > support is needed. + + One more leftover... Let nboot command know about partitions even if JFFS2 + support is not enabled. + + Signed-off-by: Ladislav Michl + Acked-by: Stefan Roese + +commit 67c2e57c0875139dbfcd6f41c43e6ad0cb2e40c9 +Author: Peter Tyser +Date: Mon Apr 20 11:22:13 2009 -0500 + + cmd_ide: Remove unused AmigaOneG3SE code + + The output_data_short() and input_data_short() functions for the + AmigaOneG3SE are unused and result in compiler warnings. + + Signed-off-by: Peter Tyser + +commit c93c102ace00764a56dbdf78bac134a23906721e +Author: Peter Tyser +Date: Mon Apr 20 11:21:40 2009 -0500 + + AmigaOneG3SE: Fix CONFIG_CMD_CONSOLE definition + + Signed-off-by: Peter Tyser + +commit 54e822f9590cc6c70411bd8cabd42236e07a2aa7 +Author: Peter Tyser +Date: Mon Apr 20 11:09:05 2009 -0500 + + Replace __asm references with __asm__ + + __asm__ follows gcc's documented syntax and is generally more common + than __asm. This change is only asthetic and should not affect + functionality. + + Signed-off-by: Peter Tyser + +commit f9a109b3adc5e8647535357500e2a38f0558b5c2 +Author: Peter Tyser +Date: Mon Apr 20 11:08:46 2009 -0500 + + Replace __attribute references with __attribute__ + + __attribute__ follows gcc's documented syntax and is generally more + common than __attribute. This change is only asthetic and should not + affect functionality. + + Signed-off-by: Peter Tyser + +commit 08f077da9298ff65cc6f85f90d2770000a1beee9 +Author: David Brownell +Date: Thu Apr 16 19:55:48 2009 -0700 + + mtdpart command: align output columns + + Make the headers in the "mtdparts" command output line up + with their columns ... strike the extra TAB character. + + Signed-off-by: David Brownell + +commit 06f41f825c23344d889d5419bb5eaeceb3ed2a02 +Author: Shinya Kuribayashi +Date: Thu Apr 16 10:51:03 2009 +0900 + + Remove sa1100.h + + sa1100.h is not used anywhere, then remove it. + + $ find . -name '*.h' -empty -print + ./include/sa1100.h + $ git grep 'sa1100.h' . + $ + + Signed-off-by: Shinya Kuribayashi + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 7d3d30b1b3fbd0a07db254ead99fa6fff4f4d992 +Author: Stefan Roese +Date: Tue Apr 14 17:51:21 2009 +0200 + + UBIFS: Remove tnc_commit.c which is not used in the read-only version + + I missed removing this file while implementing the UBIFS support. It's + not referenced at all, so let's remove it. Thanks to Artem Bityutskiy + for spotting. + + Signed-off-by: Stefan Roese + +commit 6356daff70867822bdb23cea49f98e65421a25b8 +Author: Adrian Hunter +Date: Tue Apr 14 17:50:38 2009 +0200 + + UBIFS: fix recovery bug + + UBIFS did not recovery in a situation in which it could + have. The relevant function assumed there could not be + more nodes in an eraseblock after a corrupted node, but + in fact the last (NAND) page written might contain anything. + The correct approach is to check for empty space (0xFF bytes) + from then on. + + Signed-off-by: Adrian Hunter + Signed-off-by: Stefan Roese + +commit 351f40caf2f7806b2cefb93e077ea619b9f684e8 +Author: Gao Guanhua +Date: Tue Apr 14 14:37:35 2009 +0800 + + fs: Fix the wrong type of var + + The filelen should be signed type, not unsigned type. + otherwise, The condition as below never take. + if (filelen < 0) + + Signed-off-by: Gao Guanhua + Signed-off-by: Dave Liu + +commit 05f474c4d0469bebc0bb05df60a39dc7fdf28e62 +Author: Wolfgang Denk +Date: Tue Apr 28 00:29:34 2009 +0200 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit ad74cae9ff8790727bc81ee91c6bca7d50dca446 +Author: David Brownell +Date: Thu Apr 16 23:15:15 2009 -0700 + + dm9000 EEPROM reading bugfix + + Make the U-Boot dm9000 driver read addresses from EEPROM just + like Linux does ... read six bytes, instead of reading twelve + bytes and then discarding every other one. + + Using the right Ethernet address is a big win. + + Signed-off-by: David Brownell + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Ben Warren + +commit d4c02e6f5d49880123e7f584b88f857ffd874381 +Author: Yoshihiro Shimoda +Date: Wed Feb 25 14:27:24 2009 +0900 + + rtl8169: fix cache coherency problem + + Fix the problem that cannot access actual data when CPU data cache enabled. + + Signed-off-by: Yoshihiro Shimoda + Tested-by: Nobuhiro Iwamatsu + Acked-by: Ben Warren + +commit a85693b3bd4431b05b7df608b6f7733c0f80c53e +Author: Dirk Behme +Date: Tue Apr 21 17:30:51 2009 +0200 + + OMAP3: Fix changed mmc init command + + In recent U-Boot mmcinit changed to mmc init. + + Signed-off-by: Steve Sakoman + Signed-off-by: Dirk Behme + +commit 34b76a14f676bc6501c27a96564e4dfb4793f033 +Author: Wolfgang Denk +Date: Sun Apr 26 20:39:26 2009 +0200 + + lib_arm/board.c: remove misleading "test-only" comment. + + For a long time, the print_cpuinfo() declaration in lib_arm/board.c + had been marked as "test-only", which is plain wrong considering + current usage. Delete this misleading comment. + + Signed-off-by: Wolfgang Denk + +commit 7239c5da5e9197accb3dfe395be4502c3b9bca8e +Author: David Brownell +Date: Sun Apr 12 15:40:16 2009 -0700 + + minor DaVinci clock cleanup + + Minor cleanup to clock-related defines for DaVinci DM6446 boards: + + - CONFIG_SYS_CLK_FREQ is unused; remove it. + + - CONFIG_SYS_NS16550_CLK must be the same as CONFIG_SYS_HZ_CLOCK + + On DM6446 both of those peripheral clocks actually come from the + same source, the primary oscillator. Having them use the same + symbol avoids bugs in the clone'n'modify development cycle. + + Signed-off-by: David Brownell + +commit ffd8c7170d55c34bbfcfd2c84093dcaff796cbf3 +Author: Minkyu Kang +Date: Mon Apr 6 19:59:29 2009 +0900 + + s3c64xx: remove unnecessary definition + + CONFIG_S3C6400 is must defined at config header file + That definition is unnecessary at this file + + Signed-off-by: Minkyu Kang + +commit 14b9308d511b53042ef478936e367a67282df66a +Author: Heiko Schocher +Date: Fri Apr 24 06:50:45 2009 +0200 + + 83xx: searching "muram-data" by compatible property + + if using CONFIG_BOOTCOUNT_LIMIT feature on a MPC8360 CPU + in the muram-data node, the reg entry needs to be updated. + This is done in fdt_fixup_muram(), but we should use + the compatible "fsl,qe-muram-data" for searching the + node instead of searching the muram-data node with + an absolute path. + + Signed-off-by: Heiko Schocher + Signed-off-by: Kim Phillips + +commit 8e15088794807944b221c11609d36789efc7f767 +Author: Anatolij Gustschin +Date: Thu Apr 23 21:29:34 2009 +0200 + + mpc83xx: MPC8360ERDK: fix environment offset configuration bug + + The size of U-Boot binary for MPC8360ERDK increased + (> 2 flash sectors now), so 'saveenv' will partially + overwrite U-Boot in flash and will brick the board. + This patch moves environment offset to fourth flash + sector and also fixes CONFIG_SYS_MONITOR_LEN. + + Signed-off-by: Anatolij Gustschin + Signed-off-by: Kim Phillips + +commit 3c172c4fdbbb5858fae38478d6399be4a16be3fc +Author: Michael Zaidman +Date: Sat Apr 4 01:43:00 2009 +0300 + + NetLoop initialization bug + + The patch fixes the bug of partial initialization of global network + parameters. + + Upon u-boot's start up the first ping command causes a failure of the + consequent TFTP command. It happens in the recently added mechanism of + the NetLoop initialization where initialization of global network + parameters is separated in the NetInitLoop routine which is called per + env_id change. Thus, ping request will initialize the network parameters + necessary for ping operation only, afterwards the env_changed_id will be + set to the env_id that will prevent all following initialization requests + from other protocols. + The problem is that the initialized by ping subset of network parameters + is not sufficient for other protocols and particularly for TFTP which + requires the NetServerIp also. + + Signed-off-by: Michael Zaidman + Signed-off-by: Ben Warren + +commit b11f664f52c2855990107c18f242223377183575 +Author: Timur Tabi +Date: Thu Apr 9 10:27:05 2009 -0500 + + net: fix ULI 526x macro usage in netdev.h + + Change netdev.h to use CONFIG_ULI526X instead of CONFIG_ULI526. CONFIG_ULI526X + is used everywhere else, so that's the correct macro name. Without this fix, + Ethernet will not work on the Freescale MPC8610 HPCD. + + Signed-off-by: Timur Tabi + Signed-off-by: Ben Warren + +commit 7ee38c044ca5041d3378d6507580ea4ec344af96 +Author: David Brownell +Date: Sun Apr 12 15:38:06 2009 -0700 + + fix DaVinci NS16550_REG_SIZE regression + + Update the DaVinci DM6446 boards to use the new convention + for CONFIG_SYS_NS16550_REG_SIZE ... the size hasn't changed + from the original 4 bytes, but these chips are little-endian. + + (Resolves a regression added recently by the include/ns16550.h + patch to "Unify structure declaration for registers". The code + previously worked just fine because the registers were accessed + as host-endian words, not as bytes.) + + Signed-off-by: David Brownell + +commit dfc99e143fca44a492918ac6cf3f76ee9c2473a9 +Author: Mike Frysinger +Date: Sun Apr 12 22:29:20 2009 -0400 + + cmd_nand: drop duplicate NULL ptr check + + The first if statement checks for NULL ptrs, so there is no need to check + it again in later else cases (such as .oob). + + Signed-off-by: Mike Frysinger + CC: Scott Wood + +commit 7732cef2eeb4e339cfcd8553fab773af73a20805 +Author: David Brownell +Date: Mon Apr 13 08:03:38 2009 -0700 + + CMD_UBI != MTD_PARTITIONS + + Fix dependency goofage: it should certainly be possible to have the + partition support without bringing in UBI commands. + + Signed-off-by: David Brownell + Acked-by: Stefan Roese + +commit 6ebff365eb63093ca35b687316002535c6a18820 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Apr 16 21:30:48 2009 +0200 + + at91sam9/at91cap: fix CONFIG_SYS_HZ to 1000 + + The timer has been rewrote with a precision at ~0,18% + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Tested-by: Sergey Lapin + Tested-by: Eric BENARD + +commit f0a2c7b4b64eacd06bb272856bcc056be8719f5a +Author: Ilko Iliev +Date: Thu Apr 16 21:30:48 2009 +0200 + + at91: add support for the PM9263 board of Ronetix GmbH + + The PM9263 board is based on the AT91SAM9263-EK board. + + Here is the page on Ronetix website: + http://www.ronetix.at/starter_kit_9263.html + + Signed-off-by: Ilko Iliev + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit dc39ae9513c32dfeb9e018dc0d22c6484514fefb +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Apr 16 21:30:44 2009 +0200 + + at91sam9/at91cap: improve clock framework + + calculate dynamically the clock rate and pllb setting for usb + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit dd7c302099ef5590069bdbf292aaa8230cd59de7 +Author: Stefan Roese +Date: Wed Apr 15 14:08:48 2009 +0200 + + ppc4xx: Disable POST memory test on NAND-booting Kilauea + + Don't run the memory POST on the NAND-booting version. It will + overwrite part of the U-Boot image which is already loaded from NAND + to SDRAM. We were just lucky that it booted at all with this SDRAM + test enabled. + + Signed-off-by: Stefan Roese + +commit 9a929170be89b27bce677504da27e88600c06c49 +Author: Stefan Roese +Date: Wed Apr 15 14:06:26 2009 +0200 + + ppc4xx: Disable POST memory test on NAND-booting Sequoia + + Don't run the memory POST on the NAND-booting version. It will + overwrite part of the U-Boot image which is already loaded from NAND + to SDRAM. We were just lucky that it booted at all with this SDRAM + test enabled. + + Signed-off-by: Stefan Roese + +commit 17c1b0e89b8be7d90f605eb19af9218c6275bfb3 +Author: Stefan Roese +Date: Wed Apr 15 11:32:53 2009 +0200 + + ppc4xx: Remove unused code for Sequoia NAND booting version + + The current define of get_bus_freq() in the CONFIG_NAND_SPL #ifdef is not + used at all. This patch changes it's define to the currently used value of + 133333333 and removes the unnecessary code. + + Signed-off-by: Stefan Roese + +commit cf9409885cbe01405bad76790e99f8adf3351f4d +Author: Stefan Roese +Date: Wed Apr 15 10:50:48 2009 +0200 + + ppc4xx: Add "booting from NAND" to 4xx NAND-booting targets + + This additional text in the bootup log helps to see if the board is + configured for NAND-booting. Especially helpful for boards that can + boot from NOR and NAND (e.g. most of the AMCC eval boards). + + Signed-off-by: Stefan Roese + +commit 5132106a27b8fb302677852b26ffd319b40d17e2 +Author: Stefan Roese +Date: Wed Apr 8 10:36:22 2009 +0200 + + ppc4xx: Fixup chip-selects in dtb for NAND-booting Sequoia + + Currently the NOR & NAND support in Linux only works for the "standard" + Sequoia, the version booting for NOR flash. The NAND-booting version + has the chip-selects swapped. Here the chip-select mappings: + + "Standard" NOR-booting version: + CS0 NOR + CS3 NAND + + NAND-booting version: + CS0 NAND + CS3 NOR + + With this path the dtb gets fixed-up, so that the correct chip-select + numbers are patched in the dtb enabling correct NOR & NAND support + in Linux on the NAND-booting Sequoia version. + + Signed-off-by: Stefan Roese + +commit aad4eca4ba8d597747199d8af723426681557dda +Author: Mike Frysinger +Date: Sat Apr 4 09:10:27 2009 -0400 + + Blackfin: audit UART for all known anomalies + + There is no code change here, just new comments, but this keeps me from + having to do another audit from scratch in the future. + + Signed-off-by: Mike Frysinger + +commit 8ef929afa43c77c9573caa57c6e17a97a33775c0 +Author: Mike Frysinger +Date: Sat Apr 4 08:40:13 2009 -0400 + + Blackfin: add check for anomaly 05000362 + + DESCRIPTION: + The column address width settings for banks 2 and 3 are misconnected in + the SDRAM controller. Accesses to bank 2 will result in an error if the + Column Address Width for bank 3 (EB3CAW ) is not set to be the same as + that of bank 2. + + WORKAROUND: + If using bank 2, make sure that banks 2 and 3 have the same column address + width settings in the EBIU_SDBCTL register. This must be the case + regardless of whether or not bank 3 is enabled. + + Signed-off-by: Mike Frysinger + +commit c2e07449f546fb375289cdac1a608fdc20357873 +Author: Mike Frysinger +Date: Sat Apr 4 08:29:55 2009 -0400 + + Blackfin: add comment about anomaly 05000430 avoidance + + Signed-off-by: Mike Frysinger + +commit 48ab1509254a4c175e4f65c478a978928ffe09ec +Author: Mike Frysinger +Date: Sat Apr 4 08:10:22 2009 -0400 + + Blackfin: add workaround for anomaly 05000242 + + DESCRIPTION: + If the DF bit is set prior to a hardware reset, the PLL will continue to + divide CLKIN by 2 after the hardware reset, but the DF bit itself will be + cleared in the PLL_CTL register. + + WORKAROUND: + Reprogram the PLL with DF cleared if the desire is to not divide CLKIN by + 2 after reset. + + Signed-off-by: Mike Frysinger + +commit ce1fe4ba6bb9df7c57351436fa17d1af8bbe7916 +Author: Mike Frysinger +Date: Sat Apr 4 08:09:24 2009 -0400 + + Blackfin: add workaround for anomaly 05000171 + + DESCRIPTION: + The Boot ROM is executed at power up/reset and changes the value of the + SICA_IWR registers from their default reset value of 0xFFFF, but does not + restore them. + + WORKAROUND: + User code should not rely on the default value of these registers. Set + the desired values explicitly. + + Signed-off-by: Mike Frysinger + +commit 51ee6e057f7a920e2a125cd9f985d10f625e355f +Author: Mike Frysinger +Date: Sat Apr 4 08:22:36 2009 -0400 + + Blackfin: update anomaly sheets + + Signed-off-by: Mike Frysinger + +commit a343ba87ea0320ca0a4ecfa2c42cd9d4f18883df +Author: Graf Yang +Date: Sat Apr 4 07:45:57 2009 -0400 + + Blackfin: nand: flush peripheral before polling it + + We need to make sure the data written to the nand flash controller makes + it there before we start polling its status register. Otherwise, we may + get stale data and return before the controller is actually ready. + + Signed-off-by: Graf Yang + Signed-off-by: Mike Frysinger + Acked-by: Scott Wood + +commit 3ccbfb25f48af78e7092ac75f3115e924e76c748 +Author: Remy Bohmer +Date: Sun Apr 5 11:43:28 2009 +0200 + + Support for PXA27X UDC. + + This Patch adds Support for PXA27X UDC. + (Rebased to drivers/usb reorganisation) + + Signed-off-by: Vivek Kutal + Signed-off-by: Remy Bohmer + +commit 2731b9a86685190d26b1883f27afda5ac8e1a313 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Apr 3 12:46:58 2009 +0200 + + drivers/usb: regorganisation + + move to linux usb driver organisation + + as following + + drivers/usb/gadget + drivers/usb/host + drivers/usb/musb + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Remy Bohmer + +commit d04371a116d102e587ba7aa4c329b441cdbea3f4 +Author: Todor I Mollov +Date: Sat Apr 4 06:53:06 2009 -0400 + + Blackfin: spi: make cs deassert function deterministic + + Blackfin SPI driver was not driving the SPI chip-select high before + putting the chip-select signals into tri-state mode. This is probably + something that slipped by unnoticed in most designs. If the signals are + put directly into a tri-state mode, then the board is relying on the + pull-up resistors to pull up the chip-select before the next transaction. + Most of the time this is fine, except when you have two transactions that + follow each other very closely, such as the flash erase and read status + register commands. In this case I was seeing a 500ns separation between + the transactions. In my setup, with a 10kOhm pull-up, it would meet + timing spec about half the time and resulted in intermittent errors. (A + stronger pull up would fix this, but our design is targeted for low power + consumption and a 3.3kOhm @ 3.3v is 3.3mW of needless power consumption.) + I modified the spi_cs_deactivate() function in bfin_spi.c to drive the + chip-selects high before putting them into tri-state. For me, this + resulted in a rise time of 5ns instead of the previous rise time of about + 1us, and fully satisfied the timing spec of the chip. + + Signed-off-by: Todor I Mollov + Signed-off-by: Mike Frysinger + +commit c6fadb9c73a6a3e0c7f20696e978304a593a8d2d +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Dec 13 21:08:05 2008 +0100 + + integratorap: fix PCI support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1c397508c836dfcb01fb2471c71de0727051f117 +Author: Dirk Behme +Date: Mon Mar 30 21:15:23 2009 +0200 + + OMAP3: Update Overo pin mux for new expansion board + + A new Overo expansion board uses GPIO 14, 21, 22 and 23 for LED's and + switches. This patch changes the pinmux configuration for those pins. + They were previously set up for unused MMC3_DAT4-7. + + Signed-off-by: Steve Sakoman + Signed-off-by: Dirk Behme + +commit ab298231518675b3784aea88ee9b978438f99e63 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Apr 5 13:08:03 2009 +0200 + + arm: unify reset command + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b3acb6cd4059dfb29a5e99095d802717f53ff784 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Apr 5 13:06:31 2009 +0200 + + arm: clean cache management + + unify arm cache management except for non standard cache as ARM7TDMI + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 677e62f43235de9a1701204d7bcea0fb3d233fa1 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Apr 5 13:02:43 2009 +0200 + + arm: update co-processor 15 access + + import system.h from linux + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 23e4af49e066a53cd3e3659b68ef90572d88de84 +Author: Guennadi Liakhovetski +Date: Sun Apr 5 00:42:02 2009 +0200 + + ARM: add the imx31_phycore_eet target to MAINTAINERS + + imx31_phycore_eet is a variant of the imx31_phycore board with a few + extensions, which justifies a separate entry in the MAINTAINERS list, + whereas normally all entries sharing a single configuration file and a + board/ directory have only one entry in MAINTAINERS. + + Reported-by: Wolfgang Denk + Signed-off-by: Guennadi Liakhovetski + +commit 69c5bf29908b3a7f8e23bd9891b7ecc5b21f23e5 +Author: Guennadi Liakhovetski +Date: Sun Apr 5 00:37:07 2009 +0200 + + ARM: fix out-of-tree build of imx31_phycore_eet + + Fix out-of-tree build of the imx31_phycore_eet target. + + Reported-by: Wolfgang Denk + Signed-off-by: Guennadi Liakhovetski + +commit 3c853f31d6a8e4407f73a2ca2c63d383a245f237 +Author: Jon Smirl +Date: Sat Apr 4 17:44:51 2009 -0400 + + mpc5200: reduce delays in i2c + + The previous code waited 1000us before checking i2c + status. Measurement shows i2c is usually ready in + under 50us. Change the polling interval to 15us, + loop 6,667 times to keep the polling timeout constant + at 100ms. + +commit 36003268968949110ef145d9f2eaf8439c96d25b +Author: Sanjeev Premi +Date: Fri Apr 3 14:00:07 2009 +0530 + + OMAP: Fix compile issue + + Fixes this compile error: + board.c: In function 'do_switch_ecc': + board.c:339: error: 'cmd_tbl_t' has no member named 'help' + make[1]: *** [board.o] Error 1 + make[1]: Leaving directory `/db/psp_git/users/a0756819/u-boot/cpu/arm_cortexa8/omap3' + make: *** [cpu/arm_cortexa8/omap3/libomap3.a] Error 2 + + This is due to the fact that current command uses long + help for the usage print even if the CONFIG_SYS_LONGHELP + is not enabled. (Thanks Jean-Christophe for explanation). + + Signed-off-by: Sanjeev Premi + +commit 342c1a5d9ab74febf3226a86216dc5aa05295d46 +Author: Minkyu Kang +Date: Fri Apr 3 09:56:16 2009 +0900 + + s3c64xx: fix the wrong gpio offset + + This patch fix the wrong gpio offset + + Signed-off-by: Minkyu Kang + +commit ab0689c316c9b2ee33f4de1c50263b64e539f12a +Author: Kyungmin Park +Date: Wed Nov 26 10:18:13 2008 +0900 + + Move machine specific code to board at s3c64xx (v2) + + Move machine specific code to smdk6400. + Some board use OneNAND instead of NAND. + + Some register MP0_CS_CFG[5:0] are controled by both h/w and s/w. + So it's better to use macro instead of hard-coded value. + + Signed-off-by: Kyungmin Park + +commit 767f3acd9f6e1dcb8ada926c333945382eddc7e8 +Author: Tom Rix +Date: Wed Apr 1 22:02:19 2009 -0500 + + ZOOM1 Remove legacy NAND defines + + Signed-off-by: Tom Rix + +commit 5891151707ee5902fe62d554c247f42865815757 +Author: Tom Rix +Date: Wed Apr 1 22:02:20 2009 -0500 + + OMAP3 Fix multiline formatting in board init files. + + Signed-off-by: Tom Rix + +commit c0a14aedc3440d6591b8c86d45861a0a8b46e11d +Author: Wolfgang Denk +Date: Sun Apr 5 00:27:57 2009 +0200 + + Update CHANGELOG, coding style cleanup. + +commit f63728c804ab7413a67d70f6774cd30c3f7b40fb +Author: Wolfgang Denk +Date: Sun Apr 5 00:18:44 2009 +0200 + + One more fix for building env_embedded.o + + In addition to the changes for CONFIG_ENV_IS_IN_FLASH as done in + commit afcbce07, we also need to do the same for + CONFIG_ENV_IS_IN_EEPROM and CONFIG_ENV_IS_IN_NVRAM. + + Signed-off-by: Wolfgang Denk + +commit e3d1ac7bb1955d36980d267cb4cec40b0f7d30b5 +Author: Scott Wood +Date: Thu Apr 2 16:15:10 2009 -0500 + + common/image.c: Relocate strings in tables. + + Without this, u-boot can crash or print garbage if the original link + address no longer points to a valid string. + + Signed-off-by: Scott Wood + +commit 3a671fc06ae1d9e8eba76600372317c75ae0eb3e +Author: Scott Wood +Date: Thu Apr 2 16:10:36 2009 -0500 + + mpc8260: Fill in brg's clock-frequency in device tree. + + Signed-off-by: Scott Wood + +commit c73ed274a211699739d83c2cef92853dc6716e15 +Author: Scott Wood +Date: Thu Apr 2 18:20:43 2009 -0500 + + MPC8260ADS: Add nfsboot/ramboot to default environment. + + This brings it in line with other Freescale boards. + + Signed-off-by: Scott Wood + +commit c203ef5db0476a8c4f6dd86b2e9e9db0ea973f84 +Author: Andreas Huber +Date: Thu Apr 2 17:15:34 2009 +0200 + + UBI/cfi-mtd: Fix mtd name for multiple chips + + On platforms with multiple NOR chips, currently only the first one + can be selected using the "ubi part" command. This patch fixes this + problem by using different names for the NOR "mtd devices". + + It also changes the name of the NOR MTD device from "cfi-mtd" to + "norX" (X indexing the device numer) to better match the mtdparts + defaults. + + Signed-off-by: Stefan Roese + Signed-off-by: Andreas Huber + +commit 6b6bb02f27fcabfb37ea717fb7e243248e1e2acf +Author: Peter Korsgaard +Date: Tue Mar 31 17:52:16 2009 +0200 + + tools/setlocalversion: use git svn instead of git-svn + + Use the new "git " syntax instead of the deprecated + "git-". + + Signed-off-by: Peter Korsgaard + +commit 7fa96a9a54eb0d87d73888ec2565cda790ba0dff +Author: Mingkai Hu +Date: Tue Mar 31 14:09:40 2009 +0800 + + eSPI: add the eSPI register support + + Signed-off-by: Mingkai Hu + +commit 869f6bf4def5a053fbd1aecd8b2fc36f05196c0b +Author: Minkyu Kang +Date: Mon Mar 30 14:55:51 2009 +0900 + + cmd_mmc: add support for device command for selecting mmc device + + This patch improves device command for selecting mmc device + + Signed-off-by: Minkyu Kang + +commit 9abc9ef8fbe079bf75a634ce64b7dcdb7b0d8bdc +Author: Alan Carvalho de Assis +Date: Sat Mar 28 19:50:16 2009 -0300 + + Small fix to m5282evb + + This is just a small fix to get u-boot on m5282evb. + + Signed-off-by: Alan Carvalho de Assis + +commit febd7e4174e54579c9aa165c85c519fe5288f9d2 +Author: Artem Bityutskiy +Date: Fri Mar 27 10:21:14 2009 +0100 + + UBIFS: add R/O compatibility + + Now UBIFS is supported by u-boot. If we ever decide to change the + media format, then people will have to upgrade their u-boots to + mount new format images. However, very often it is possible to + preserve R/O forward-compatibility, even though the write + forward-compatibility is not preserved. + + This patch introduces a new super-block field which stores the + R/O compatibility version. + + Signed-off-by: Artem Bityutskiy + Acked-by: Adrian Hunter + Signed-off-by: Stefan Roese + +commit 852dbfdd56f68eb67d138b306a64e4de58dabb91 +Author: Mike Frysinger +Date: Mon Mar 23 22:27:34 2009 -0400 + + more command usage cleanup + + Fix up a few dangling commands like in "Command usage cleanup" commit. + + Signed-off-by: Mike Frysinger + +commit b93b24bf76f8a8220b236df3a5f30b2204eb4edc +Author: Ladislav Michl +Date: Mon Mar 23 12:06:07 2009 +0100 + + Separate mtdparts command from jffs2 + + On Thu, Mar 19, 2009 at 01:30:36PM +0100, Stefan Roese wrote: + > Currently the mtdparts commands are included in the jffs2 command support. + > This doesn't make sense anymore since other commands (e.g. UBI) use this + > infrastructure as well now. This patch separates the mtdparts commands from + > the jffs2 commands making it possible to only select mtdparts when no JFFS2 + > support is needed. + + ... and to make it useful for NAND chips as well, we should also remove now + unrelated CONFIG_JFFS2_NAND. Note that struct part_info etc is in + jffs2/load_kernel.h which is a bit misleading filename for that purpose, + but that can be fixed later (tm). + + Signed-off-by: Ladislav Michl + +commit b196ca75503ce307c535b87bf47d51f05e7530df +Author: Mike Frysinger +Date: Sun Mar 22 22:18:01 2009 -0400 + + smc91111_eeprom: move board-specific init into SMC91111_EEPROM_INIT() + + Rather than sticking Blackfin-specific stuff into the eeprom example, use + an indirect macro so that any board can override it with their own magic + sauce in their board config file. + + Also fix some spurious semi-colons in defines while I'm at it ... + + Signed-off-by: Mike Frysinger + CC: Ben Warren + +commit f5cf2ef2ad2a8bf321712ab460ed846120163d74 +Author: Sascha Hauer +Date: Sat Mar 21 09:38:46 2009 -0400 + + mpc52xx phy: initialize only when needed + + Do not initialize phy on startup, instead initialize it + when we actually need it. + + Signed-off-by: Sascha Hauer + +commit 03bab0091948196b9558248684c04f60943ca4b5 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 16:51:40 2009 +0200 + + at91sam9263ek: enable hush and auto complete support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Acked-by: Stelian Pop + +commit 4758ebdd53571d4d183be5c2db8f0ee4ef368915 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:44 2009 +0100 + + at91: move dataflash spi driver to drivers/spi + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2b7178afce59f71e95da657273f4132012098c1f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:44 2009 +0100 + + at91: move usb driver to drivers/usb + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f82518d7f443ebac5f8821103a3c521c963aa6ee +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:43 2009 +0100 + + at91rm9200: Reset update + + Update the rm9200 reset sequence to try executing a board-specific reset + function and move specific board reset to board. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 3524049cd053746298e4cfab2449882e75c146fc +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:43 2009 +0100 + + at91rm9200: move serial shutdown code to serial drivers + + introduce serial_exit for this purpose. Use it only when the rm9200 + serial driver is active + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit beebd851cdbc9dd070bcdfec1fd8f17e3cc91bc0 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:43 2009 +0100 + + at91rm9200: move serial driver to drivers/serial + + add CONFIG_AT91RM9200_USART to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit cb82a532669f6b02225ec3429ea4d49ff2b97d0a +Author: Ulf Samuelsson +Date: Fri Mar 27 23:26:43 2009 +0100 + + Add support for the AT91RM9200EK Board. + + The AT91RM9200-EK Evaluation Board supports the AT91RM9200 + ARM9-based 32-bit RISC microcontroller and enables real-time code development + and evaluation. + + Here is the chip page on Atmel website: + http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507 + + with + - NOR (cfi driver) + - DataFlash + - USB OHCI + - Net + - I2C (hard) + + Signed-off-by: Ulf Samuelsson + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b9c0e4c29e3ec12668ac50e954e7c9ba8f7aa10a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:42 2009 +0100 + + add dataflash mmc mux missing support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2a325ce3c705ab2d82760afc541c511328472df8 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:42 2009 +0100 + + at91rm9200dk: Move conditional compilation to Makefile + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 90a92a708d5180a20d600ba0fc2352ec76dc3829 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:42 2009 +0100 + + at91: rename DATAFLASH_MMC_SELECT to CONFIG_DATAFLASH_MMC_SELECT + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 843a2654bce74192de2b5a43474fdc27a572ab40 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 23:26:42 2009 +0100 + + at91sam9: add watchdog support + + Signed-off-by: Nicolas Ferre + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit a47492ac60657dd9d59c713aa049319ea6eabd52 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Fri Mar 27 13:14:52 2009 +0100 + + at91sam9/at91cap: spi init add hardware chip select support + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 66932ac3929c7a145a6ef6574a96fd7535154951 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Apr 4 19:15:40 2009 +0200 + + netstar: fix crc32.c dependancy location + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 42f9ebff2f758bef524780a00c712eb63a72d99b +Author: Scott Wood +Date: Fri Apr 3 15:24:40 2009 -0500 + + MPC8260ADS: Define CONFIG_HAS_ETH0. + + This is required so that the MAC address will be updated in the device tree. + + Signed-off-by: Scott Wood + +commit 8701eceffdf77e2908d0b58add0dabc16edf6087 +Author: Scott Wood +Date: Fri Apr 3 15:26:45 2009 -0500 + + PQ2FADS: Enable PCI. + + PCI on PQ2FADS is very similar to PCI on MPC8272ADS. + + Signed-off-by: Scott Wood + +commit 83863df04bd30bfe2430b0c43ca9f78596d3f0bc +Author: Wolfgang Denk +Date: Sat Apr 4 16:57:50 2009 +0200 + + Fix quoting bug introduced by commit 74de7aef + + Signed-off-by: Wolfgang Denk + +commit ecf3fb223a56e3c6aa696d94d694eeaca0f44d33 +Author: Wolfgang Denk +Date: Sat Apr 4 16:14:51 2009 +0200 + + Fix implicit declaration of function 'htons' + + Include instead of to get htons() + prototpye. + + Signed-off-by: Wolfgang Denk + +commit e6a6789f41f0560ce280089fbd3f1bd0f0f64306 +Author: Kumar Gala +Date: Sat Apr 4 10:21:02 2009 -0500 + + fsl_law: Fix bug in calculation of LAW sizing + + In set_ddr_laws() when we determined how much of the size requested + to be mapped was covered by the the first LAW we needed to recalculate + the size based on what was actually mapped. + + Signed-off-by: Kumar Gala + +commit 32049b4048ff8e59bd5ba6160d6d5206d283b2a2 +Author: Kumar Gala +Date: Thu Apr 2 13:57:05 2009 -0500 + + fsl_pci: Move prototypes into fsl_pci.h and remove explicit externs + + Signed-off-by: Kumar Gala + +commit c8514622e2713d9c47919acfe23fce386782afe7 +Author: Kumar Gala +Date: Thu Apr 2 13:22:48 2009 -0500 + + fsl_pci: Renamed immap_fsl_pci.h to fsl_pci.h + + Rename the pci header for FSL HW so we can move some prototypes + in there and stop doing explicit externs + + Signed-off-by: Kumar Gala + +commit afcbce07e9323c0e8aeb783ba7ce6104860fd7a7 +Author: Wolfgang Denk +Date: Sat Apr 4 16:10:40 2009 +0200 + + Fix building of env_embedded.o + + Since commit a706bfc7 common/env_embedded.o and tools/envcrc were + only built when CONFIG_ENV_IS_EMBEDDED was set, but this breaks + building for many boards. + + We always have to build these files when CONFIG_ENV_IS_IN_FLASH is + set. + + Signed-off-by: Wolfgang Denk + +commit a31e091ad70915278fb15b79d6ae53ea2d44b251 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Apr 4 12:49:11 2009 +0200 + + rename include/zlib.h to include/u-boot/zlib.h + + Some systems have zlib.h installed in /usr/include/. This isn't the + desired file for u-boot code - we want the one in include/zlib.h. + This rename will avoid the conflict. + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Mike Frysinger + +commit ae644c178f097874a92a6d934f364985fc7e075a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Apr 4 12:46:31 2009 +0200 + + tools/Makefile: fix image.c dependancy location + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Mike Frysinger + +commit b074a7081124d7f05fd1651a3bc0b5579fdfa473 +Author: Mike Frysinger +Date: Sat Apr 4 07:42:25 2009 -0400 + + tools: add ncb to gitignore + + Signed-off-by: Mike Frysinger + +commit 453c0d7558215cbc8636d94af172886d84e0dbba +Author: Detlev Zundel +Date: Fri Apr 3 16:45:46 2009 +0200 + + include/ns16550.h: Unify structure declaration for registers + + Instead of special casing the different access patterns, use common + code with light macros sprinkled in to accomodate for the different + layouts of the register structure. + + Note that this also changes the types of the registers for the + "positively packed (>1)" cases. As the registers truly are unsigned + chars, this is surely the Right Thing, but it is a semantic change. + Note that for this case depending on the endianness on the bus, we may + see a change of behaviour. + + Signed-off-by: Detlev Zundel + +commit 0a145ce6e7075aa0f4869d6f6149a5ff205d95df +Author: Peter Tyser +Date: Fri Mar 13 18:54:52 2009 -0500 + + Delete now unused tools/Makefile.win32 + + Signed-off-by: Peter Tyser + +commit 2f8d396b9302eddcd8d552648e101a46b7a80acd +Author: Peter Tyser +Date: Fri Mar 13 18:54:51 2009 -0500 + + Add support for building native win32 tools + + Add support for compiling the host tools in the tools directory using + the MinGW toolchain. This produces executables which can be used on + standard Windows computers without requiring cygwin. + + One must specify the MinGW compiler and strip utilities as if they + were the host toolchain in order to build win32 executables, eg: + + make HOSTCC=i586-mingw32msvc-gcc HOSTSTRIP=i586-mingw32msvc-strip tools + + Signed-off-by: Peter Tyser + +commit e50abf662efbf4ce0e731062c8d3c8ec54763ae2 +Author: Peter Tyser +Date: Fri Mar 13 18:54:50 2009 -0500 + + tools/Makefile: Simplify HOST_CFLAGS/HOST_LDFLAGS generation + + Signed-off-by: Peter Tyser + +commit b0d4d7219a4806e46affc96bd1f65397194a6e72 +Author: Peter Tyser +Date: Fri Mar 13 18:54:49 2009 -0500 + + tools/Makefile: Create generic build rules + + Create a few generic build rules to replace the current method which has + 1 build target for each file + + Signed-off-by: Peter Tyser + +commit 273174ddbcce215c42f6c307470cd5580a3f72bf +Author: Peter Tyser +Date: Fri Mar 13 18:54:48 2009 -0500 + + tools/Makefile: Use auto-generated object file dependencies + + Files in the SRCS variable have their dependencies automatically + generated so remove duplicate explicit dependencies + + Signed-off-by: Peter Tyser + +commit fb8b33c1e6d621ea3347a75ad3a42a386b44e589 +Author: Peter Tyser +Date: Fri Mar 13 18:54:47 2009 -0500 + + tools/Makefile: Remove symlinks for remaining source files + + Signed-off-by: Peter Tyser + +commit eed073315b6447eceadf7468a4c2b757442c7c6f +Author: Peter Tyser +Date: Fri Mar 13 18:54:46 2009 -0500 + + tools/Makefile: Dynamically generate libfdt object dependencies + + Add the libfdt files to the SRCS variable so that they have their + dependencies automatically generated + + Signed-off-by: Peter Tyser + +commit c0170175393b94560fa7a5da6dd31377df5f4a72 +Author: Peter Tyser +Date: Fri Mar 13 18:54:45 2009 -0500 + + tools/Makefile: Remove symlinks for fdt targets + + Signed-off-by: Peter Tyser + +commit 45d6bdff68877ea214ff33cc1c89a29c76e96f51 +Author: Peter Tyser +Date: Fri Mar 13 18:54:44 2009 -0500 + + tools/Makefile: Add libfdt/ to the include search path + + This change makes the process of symlinking libfdt_internal.h + unnecessary + + Signed-off-by: Peter Tyser + +commit fba0e3a0814f9bf48c32a4c8a7987c36ae96651b +Author: Peter Tyser +Date: Fri Mar 13 18:54:43 2009 -0500 + + tools: Remove unecessary symlinking of zlib.h + + crc32.c uses the zlib.h header in include/u-boot/zlib.h. The symlink + was previously necessary to give U-Boot's version of zlib.h precedence + over the host computer's version of zlib.h. + + Signed-off-by: Peter Tyser + +commit 40b8d909ace06f6f494dee08ffa64a82493e72e9 +Author: Peter Tyser +Date: Fri Mar 13 18:54:42 2009 -0500 + + tools/Makefile: Add tools/ to the include search path + + This change makes the process of symlinking mkimage.h and fdt_host.h + unnecessary + + Signed-off-by: Peter Tyser + +commit 1cd300de5e19c9e8383ee2eb2b6bd3b8b9378c78 +Author: Peter Tyser +Date: Fri Mar 13 18:54:41 2009 -0500 + + tools/Makefile: Compile ncb when CONFIG_NETCONSOLE + + Also conditionally add ncb.o to OBJ_FILES list + + Signed-off-by: Peter Tyser + +commit 123c48a21ce08b4a33f36e96cc75f92324e761d7 +Author: Peter Tyser +Date: Fri Mar 13 18:54:40 2009 -0500 + + tools/Makefile: Make gen_eth_addr dependent upon CONFIG_CMD_NET + + Signed-off-by: Peter Tyser + +commit 4d93a0a807b8ca0289ba5da00c646cd2d54af120 +Author: Peter Tyser +Date: Fri Mar 13 18:54:39 2009 -0500 + + tools/Makefile: Make envcrc dependent upon CONFIG_ENV_IS_EMBEDDED + + Signed-off-by: Peter Tyser + +commit cd26a31a23f9a58ba52870f8ffb57d77d1baee20 +Author: Peter Tyser +Date: Fri Mar 13 18:54:38 2009 -0500 + + tools/Makefile: Make inca-swap-bytes dependent on CONFIG_INCA_IP + + Signed-off-by: Peter Tyser + +commit 7cd5cbc34699ccc15d0277f48375cad928d04faf +Author: Peter Tyser +Date: Fri Mar 13 18:54:37 2009 -0500 + + tools/Makefile: Make ubsha1 dependent upon CONFIG_SHA1_CHECK_UB_IMG + + Signed-off-by: Peter Tyser + +commit eeba8617908e33f7e7db3b1588c04ca65b856793 +Author: Peter Tyser +Date: Fri Mar 13 18:54:36 2009 -0500 + + tools/Makefile: Make img2srec dependent upon CONFIG_CMD_LOADS + + Signed-off-by: Peter Tyser + +commit 335ffe7e0e0a30e90ce409c3279016a582157d8e +Author: Peter Tyser +Date: Fri Mar 13 18:54:35 2009 -0500 + + tools/Makefile: Build bmp_logo only when LCD or VIDEO logos are enabled + + Signed-off-by: Peter Tyser + +commit ee3584a5970230ee96aae19505ad3226734ee4ff +Author: Peter Tyser +Date: Fri Mar 13 18:54:34 2009 -0500 + + tools/Makefile: Split variable declarations into multiple lines + + Split variable declarations into multiple lines and use the standard + VAR-y convention. Also move object and binary variable declarations to + after config.mk has been included to allow for these lists to utilize + the CONFIG_XXX variables. + + These changes lay the groundwork for conditional compilation of files + in the tools directory. + + Signed-off-by: Peter Tyser + +commit 21d28e95ed874ab1ed9787f939d8a53e99d30ddb +Author: Peter Tyser +Date: Fri Mar 13 18:54:33 2009 -0500 + + tools/Makefile: Remove inappropriate double-tabs + + Signed-off-by: Peter Tyser + +commit 652f4ba076689fd0acd447561a777b1c440a4b57 +Author: Peter Tyser +Date: Fri Mar 13 18:54:32 2009 -0500 + + tools/Makefile: Remove HOSTARCH HOSTOS defines + + The values of HOSTARCH and HOSTOS which are exported from the top-level + Makefile should be used + + Signed-off-by: Peter Tyser + +commit 2eeb4e95fbfafe54645fae7ec0b2594101f0573b +Author: Peter Tyser +Date: Fri Mar 13 18:54:31 2009 -0500 + + gen_eth_addr: Use POSIX rand() and srand() + + Replace random()/srandom() use with rand()/srand() to support + compilation with the mingw toolchain. The rand()/srand() functions are + generally more common and are functionally equivalent to the original + random()/srandom() calls. + + Signed-off-by: Peter Tyser + +commit 24d2ae5e9debe4b75151a55251031a14477fa875 +Author: Peter Tyser +Date: Fri Mar 13 18:54:28 2009 -0500 + + elf.h: Use stdint.h to provide standard typedefs for WIN32 + + The original code provided an incomplete set of typedefs for WIN32 + compiles and replicated the standard typedefs that are already + provided by stdint.h + + Signed-off-by: Peter Tyser + +commit a706bfc7d0e2d1935c5670045288e6cd1ffdfabc +Author: Peter Tyser +Date: Fri Mar 13 18:54:27 2009 -0500 + + common/Makefile: Conditionally compile env_embedded.o + + Signed-off-by: Peter Tyser + +commit 2b48f7d5f62835f87278efb498397b6ae9e2d117 +Author: Peter Tyser +Date: Fri Mar 13 18:54:26 2009 -0500 + + Makefile: Add removal of *.exe files to clean target + + Signed-off-by: Peter Tyser + +commit d0d6144e0e4a03a68311b781f3dde38dc9316b82 +Author: Peter Tyser +Date: Fri Mar 13 18:54:25 2009 -0500 + + Makefile: Make autoconf.mk a dependency of the depend target + + The original code did not generate autoconf.mk until after some targets + dependencies had already been calculated, for example the directories in + the SUBDIRS variable + + Signed-off-by: Peter Tyser + +commit 75eb82ec7cacb18d059d701b35677b93d2bb7596 +Author: unsik Kim +Date: Wed Feb 25 11:31:24 2009 +0900 + + mflash: Initial mflash support + + Mflash is fusion memory device mainly targeted consumer eletronic and + mobile phone. + Internally, it have nand flash and other hardware logics and supports + some different operation (ATA, IO, XIP) modes. + + IO mode is custom mode for the host that doesn't have IDE interface. + (Many mobile targeted SoC doesn't have IDE bus) + + This driver support mflash IO mode. + + Followings are brief descriptions about IO mode. + + 1. IO mode based on ATA protocol and uses some custom command. (read + confirm, write confirm) + 2. IO mode uses SRAM bus interface. + + Signed-off-by: unsik Kim + +commit 200779e3e2a9aeda7030b171a8c39d7797019917 +Author: Detlev Zundel +Date: Fri Apr 3 11:53:01 2009 +0200 + + Rename common ns16550 constants with UART_ prefix to prevent conflicts + + Fix problems introduced in commit + 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 [inka4x0: Add hardware + diagnosis functions for inka4x0] which redefined MSR_RI which is + already used on PowerPC systems. + + Also eliminate redundant definitions in ps2mult.h. More cleanup will + be needed for other redundant occurrences though. + + Signed-off-by: Detlev Zundel + +commit 99067b08f4a0ce20ff337a35211239f334d8f451 +Author: Scott Wood +Date: Wed Apr 1 15:33:24 2009 -0500 + + Noisily disable the legacy NAND subsystem. + + Legacy NAND is marked for feature removal after April 2009 (i.e. this + upcoming release). There are still several boards that reference it + (though many do so only for disk-on-chip support which has been silently + disabled for a while now). These boards will now fail to build + with #error, though the code is still there if the user removes #error. + + The plan is to remove the code outright in the next release, along with + any board code that refers to it (such as board/esd/common/auto_update.c). + + Also, remove the legacy NAND API description from README.nand. + + Signed-off-by: Scott Wood + +commit 69bcabb51686fdd133cb1848c0d3b0a4fc6ca5cf +Author: apgmoorthy +Date: Fri Mar 27 14:45:23 2009 +0530 + + Fix OneNAND ipl to read CONFIG_SYS_MONITOR_LEN + + Currently OneNAND initial program loader (ipl) reads only block 0 ie 128KB. + However, u-boot image for apollon board is 195KB making the board + unbootable with OneNAND. + + Fix ipl to read CONFIG_SYS_MONITOR_LEN. + CONFIG_SYS_MONITOR_LEN macro holds the U-Boot image size. + + Signed-off-by: Rohit Hagargundgi + Signed-off-by: Gangheyamoorthy + Signed-off-by: Scott Wood + +commit 74de7aefd79690bae8cf5a5120f5962d444be089 +Author: Wolfgang Denk +Date: Wed Apr 1 23:34:12 2009 +0200 + + Add "source" command; prepare removal of "autoscr" command + + According to the doc/feature-removal-schedule.txt, the "autoscr" + command will be replaced by the "source" command in approximately 6 + months from now. + + This patch prepares this change and starts a 6 month transition + period as follows: + + - The new "source" command has been added, which implements exactly + the same functionlaity as the old "autoscr" command before + - The old "autoscr" command name is kept as an alias for compatibility + - Command sequences, script files atc. have been adapted to use the + new "source" command + - Related environment variables ("autoscript", "autoscript_uname") + have *not* been adapted yet; these will be renamed resp. removed in + a separate patch when the support for the "autoscr" command get's + finally dropped. + + Signed-off-by: Wolfgang Denk + +commit 78237df55248034a2d7c2daea992b9dbe7ca8e96 +Author: Wolfgang Denk +Date: Thu Apr 2 17:31:09 2009 +0200 + + Add "GPL cleanup" task to feature-removal-schedule.txt + + Announce removal of all non-GPL or GPL-incompatible files + after August 2009. + + Signed-off-by: Wolfgang Denk + +commit d9596ffbdc79cea285010b67dd20a4618303f624 +Author: Mike Frysinger +Date: Thu Apr 2 12:51:28 2009 -0400 + + sf: stmicro: dont send 4 bytes when reading status register + + I can't find anywhere in the datasheet that says the status register needs + 3 dummy bytes sent to it before being able to read back the first real + result. Tests on a Blackfin board show that after writing the opcode, the + status register starts coming back immediately. So only write out the + read status register opcode before polling the result. + + Signed-off-by: Mike Frysinger + CC: Jason McMullan + CC: TsiChung Liew + +commit 1abe365ffcfc29c061e8fd8b45551be5ad1428dd +Author: Mike Frysinger +Date: Thu Apr 2 08:11:31 2009 -0400 + + sf: set common timeouts in seconds, not milliseconds + + Since timeouts are only hit when there is a problem in the system, we + don't want to prematurely timeout on a functioning setup. Thus having + low timeouts (in milliseconds) doesn't gain us anything in the production + case, but rather increases likely hood of causing problems where none + otherwise exist. + + Signed-off-by: Mike Frysinger + CC: Haavard Skinnemoen + +commit 2a6ce1115b3cbe746965cfa0058ce645b6c1ada1 +Author: Mike Frysinger +Date: Thu Apr 2 06:51:49 2009 -0400 + + sf: stmicro: use common page timeout define + + Signed-off-by: Mike Frysinger + CC: Haavard Skinnemoen + +commit 0dcdbb172c2fdf60c5c578980308b312fd56496f +Author: Mike Frysinger +Date: Sat Mar 28 06:41:09 2009 -0400 + + sf: always read 5 bytes for the idcode + + Some SPI flash drivers like to have extended id information available + (like the spansion flash), so rather than making it re-issue the ID cmd + to get at the last 2 bytes, have the common code read 5 bytes rather than + just 3. This also matches the Linux behavior where it always reads 5 id + bytes from all flashes. + + Signed-off-by: Mike Frysinger + Acked-by: Haavard Skinnemoen + CC: Mingkai Hu + +commit 9726ba4abaa16cd6c385ad350d403f98a8eacf52 +Author: Mike Frysinger +Date: Fri Mar 27 16:34:21 2009 -0400 + + sf: stmicro: drop redundant id read + + The common SPI flash code reads the idcode and passes it down to the SPI + flash driver, so there is no need to read it again ourselves. + + Signed-off-by: Mike Frysinger + Acked-by: Haavard Skinnemoen + CC: Jason McMullan + CC: TsiChung Liew + +commit 1c5874374e091b4bb62917c519861f7682fe066e +Author: Mike Frysinger +Date: Fri Mar 27 19:27:58 2009 -0400 + + sf: add driver for SST flashes + + Signed-off-by: Mike Frysinger + Acked-by: Haavard Skinnemoen + +commit f773a1bbdb8f3bf1ddab2874f36f043c4f8f044d +Author: Mike Frysinger +Date: Mon Mar 23 23:03:58 2009 -0400 + + sf: drop DEBUG defines + + Signed-off-by: Mike Frysinger + Acked-by: Haavard Skinnemoen + +commit 6b850a9fa8a216f3692da2511cb1a6c16409b1af +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Jan 4 07:44:07 2009 +0100 + + mtd: add some at45 spi flash support + + - AT45DB321D + - AT45DB161D + - AT45DB081D + - AT45DB041D + - AT45DB021D + - AT45DB011D + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Mike Frysinger + +commit 6805e4bf83e6f444f7411101228766c8a7aec5f7 +Author: Mingkai Hu +Date: Tue Mar 31 14:09:41 2009 +0800 + + mtd: SPI Flash: Support the Spansion Flash + + Add MTD SPI Flash support for S25FL008A, S25FL016A, + S25FL032A, S25FL064A, S25FL128P. + + Signed-off-by: Mingkai Hu + Signed-off-by: Mike Frysinger + +commit 40587701924aa0afc86b3840421b4cc6de42c748 +Author: Mike Frysinger +Date: Mon Mar 30 20:56:45 2009 -0400 + + Blackfin: force all boards to HZ of 1000 + + Since the Blackfin timer code requires HZ to be 1000, barf on any board + that tries to use a different value. + + Signed-off-by: Mike Frysinger + +commit f4032d2eec9d71a59c6c724671e577f67a76839b +Author: Mike Frysinger +Date: Fri Mar 27 21:07:45 2009 -0400 + + Blackfin: bf533-stamp: drop old spi flash driver + + Now that the common SPI flash code supports all the flashes, we can stop + using the old driver. + + Signed-off-by: Mike Frysinger + +commit bc72f50a659d0d1b551817e1910b9b2be1c7e496 +Author: Mike Frysinger +Date: Thu Mar 26 15:42:12 2009 -0400 + + Blackfin: add BF538/BF539 SPI portmux handling + + Signed-off-by: Mike Frysinger + +commit 46ac352f0f9406a5f9aa157ac62867fb4650dfd3 +Author: Mike Frysinger +Date: Mon Mar 23 22:36:10 2009 -0400 + + Blackfin: do not delay on output bytes + + Signed-off-by: Mike Frysinger + +commit dbc6ab9f75bd0c13d3f42692e9463f8ab65fc382 +Author: Mike Frysinger +Date: Mon Mar 23 22:17:27 2009 -0400 + + Blackfin: drop newline from OTP help + + Looks like I accidentally added a newline to the OTP help when merging and + older change. + + Signed-off-by: Mike Frysinger + +commit d3c38d96b991d641a33f7748130dae008563cdc9 +Author: Mike Frysinger +Date: Sun Mar 22 23:43:31 2009 -0400 + + Blackfin: convert bfin_sdh to legacy mmc + + The Blackfin SDH controller is still using the legacy framework, so update + the driver to use the renamed functions. + + Signed-off-by: Mike Frysinger + +commit d248cfb2d940b742f6bfdba9b832a3df96da3101 +Author: Mike Frysinger +Date: Sun Feb 22 16:30:38 2009 -0500 + + Blackfin: bf537-stamp: split CF/IDE code out into dedicated cf-ide.c + + Signed-off-by: Mike Frysinger + +commit ad9073211ca9e62162a39851e082b8d07a662fb6 +Author: Mike Frysinger +Date: Fri Feb 13 17:10:58 2009 -0500 + + Blackfin: fix crash when booting from external memory + + When testing a u-boot binary that hasn't been booted from the bootrom, we + have to make sure the bootstruct structure has sane storage space. If we + don't, the initcode will crash when it tries to dereference an invalid + pointer. + + Signed-off-by: Mike Frysinger + +commit 84a9dda324c3faa56be14449d7519b993d9397a9 +Author: Mike Frysinger +Date: Sun Oct 12 21:32:52 2008 -0400 + + Blackfin: bf518f-ezbrd: new board port + + Signed-off-by: Mike Frysinger + +commit 0c31ddf7b70f77dede42dc82ecab7753a819acaa +Author: Mike Frysinger +Date: Sun Oct 12 21:30:48 2008 -0400 + + Blackfin: bf526-ezbrd: new board port + + Signed-off-by: Mike Frysinger + +commit 5c45f7cac2f74e2c14aa6b028cd969651cc9ac8e +Author: Mike Frysinger +Date: Sun Oct 12 21:25:33 2008 -0400 + + Blackfin: bf538f-ezkit: new board port + + Signed-off-by: Mike Frysinger + +commit d9a5d113b93583c984711127ab8503e136ed1e4a +Author: Mike Frysinger +Date: Sun Oct 12 20:59:12 2008 -0400 + + Blackfin: bf527-ezkit: new board port + + Signed-off-by: Mike Frysinger + +commit 76d21803ddd7dc4bcb81739ea2d3cd679e052f46 +Author: Mike Frysinger +Date: Sun Oct 12 05:05:42 2008 -0400 + + Blackfin: bf548-ezkit: new board port + + Signed-off-by: Mike Frysinger + +commit 67b89c79e72fe86b0ea0199425d880630beb95d8 +Author: Laurent Gregoire +Date: Tue Mar 3 14:23:59 2009 +0100 + + libfdt: Fix C++ compile-time cast error on gnu 4.2.1 + + Allow the inclusion of libfdt.h in C++ source. + + Signed-off-by: Laurent Gregoire + Acked-by: David Gibson + +commit 13d93f38e86818739317b0206d597265cf9e675e +Author: Emil Medve +Date: Mon Feb 23 10:43:36 2009 -0600 + + Fix a possible overflow case detected by gcc 4.3.2 + + .../dtc/libfdt/fdt_sw.c: In function 'fdt_end_node': + .../dtc/libfdt/fdt_sw.c:81: error: assuming signed overflow does not occur when assuming that (X + c) < X is always false + + Signed-off-by: Emil Medve + +commit a22d9cfbb5bcfb3dc6ffd64d391b568e8a0ce383 +Author: David Gibson +Date: Fri Feb 6 14:03:24 2009 +1100 + + libfdt: Rework/cleanup fdt_next_tag() + + Currently, callers of fdt_next_tag() must usually follow the call with + some sort of call to fdt_offset_ptr() to verify that the blob isn't + truncated in the middle of the tag data they're going to process. + This is a bit silly, since fdt_next_tag() generally has to call + fdt_offset_ptr() on at least some of the data following the tag for + its own operation. + + This patch alters fdt_next_tag() to always use fdt_offset_ptr() to + verify the data between its starting offset and the offset it returns + in nextoffset. This simplifies fdt_get_property() which no longer has + to verify itself that the property data is all present. + + At the same time, I neaten and clarify the error handling for + fdt_next_tag(). Previously, fdt_next_tag() could return -1 instead of + a tag value in some circumstances - which almost none of the callers + checked for. Also, fdt_next_tag() could return FDT_END either because + it encountered an FDT_END tag, or because it reached the end of the + structure block - no way was provided to tell between these cases. + + With this patch, fdt_next_tag() always returns FDT_END with a negative + value in nextoffset for an error. This means the several places which + loop looking for FDT_END will still work correctly - they only need to + check for errors at the end. The errors which fdt_next_tag() can + report are: + - -FDT_ERR_TRUNCATED if it reached the end of the structure + block instead of finding a tag. + + - -FDT_BADSTRUCTURE if a bad tag was encountered, or if the + tag data couldn't be verified with fdt_offset_ptr(). + + This patch also updates the callers of fdt_next_tag(), where + appropriate, to make use of the new error reporting. + + Finally, the prototype for the long gone _fdt_next_tag() is removed + from libfdt_internal.h. + + Signed-off-by: David Gibson + +commit 2c0b843e710aa1e2da25c2592e6dbe5d0b0ab7da +Author: David Gibson +Date: Fri Feb 6 14:01:56 2009 +1100 + + libfdt: Rework fdt_next_node() + + Currently fdt_next_node() will find the next node in the blob + regardless of whether it is above, below or at the same level in the + tree as the starting node - the depth parameter is updated to indicate + which is the case. When a depth parameter is supplied, this patch + makes it instead terminate immediately when it finds the END_NODE tag + for a node at depth 0. In this case it returns the offset immediately + past the END_NODE tag. + + This has a couple of advantages. First, this slightly simplifies + fdt_subnode_offset(), which no longer needs to explicitly check that + fdt_next_node()'s iteration hasn't left the starting node. Second, + this allows fdt_next_node() to be used to implement + _fdt_node_end_offset() considerably simplifying the latter function. + + The other users of fdt_next_node() either don't need to iterate out of + the starting node, or don't pass a depth parameter at all. Any + callers that really need to iterate out of the starting node, but keep + tracking depth can do so by biasing the initial depth value. + + This is a semantic change, but I think it's very unlikely to break any + existing library users. + + Signed-off-by: David Gibson + +commit c123098035be8bae3859bbfbd06861f197c07631 +Author: Scott Wood +Date: Tue Mar 31 17:49:36 2009 -0500 + + mpc83xx: Set guarded bit on BAT that covers the end of the address space + + The mpc8313erdb board currently sets DBAT6 to cover all of the final 256MiB of + address space; however, not all of this space is covered by a device. In + particular, flash sits at 0xfe000000-0xfe7fffff, and nothing is mapped + at the far end of the address space. + + In zlib, there is a loop that references p[-1] if p is non-NULL. Under + some circumstances, this leads to the CPU speculatively loading from + 0xfffffff8 if p is NULL. This leads to a machine check. + + Signed-off-by: Scott Wood + + continuation to the remaining mpc83xx boards that suffer from the same problem. + + Signed-off-by: Kim Phillips + +commit c2eb8be7f760a2efe30a495bfb10857838dcf3fa +Author: Kim Phillips +Date: Mon Mar 30 14:28:05 2009 -0500 + + rtc: remove broken rtc_read and rtc_write declarations + + commit 04e11cf3 "rtc: add support for 4543 RTC (manufactured by e.g. + EPSON)" introduces the following build error on boards configuring e.g, + the ds1374 rtc: + + Configuring for MPC837XEMDS board... + ds1374.c:103: error: static declaration of 'rtc_read' follows non-static declaration + /home/r1aaha/git/u-boot/include/rtc.h:64: error: previous declaration of 'rtc_read' was here + ds1374.c:104: error: conflicting types for 'rtc_write' + /home/r1aaha/git/u-boot/include/rtc.h:65: error: previous declaration of 'rtc_write' was here + + this reverts the erroneous chunk. + + Signed-off-by: Kim Phillips + Acked-by: Detlev Zundel + CC: Detlev Zundel + CC: Andreas Pfefferle + +commit fc39c2fd51e64707de4d61ed49479ebea2847e1b +Author: Kumar Gala +Date: Tue Mar 31 17:58:13 2009 -0500 + + 85xx/86xx: Ensure MP boot page is not used + + We had a bug on 86xx in which the boot page used to bring up secondary + cores was being overwritten and used for the malloc region in u-boot. + + We need to reserve the region of memory that the boot page is going to + be put at so nothing uses it. + + Signed-off-by: Kumar Gala + Acked-by: Becky Bruce + +commit c840d26c752141b94bbc24ac748ddd45752a955a +Author: Kumar Gala +Date: Tue Mar 31 23:11:05 2009 -0500 + + 85xx: Introduce determine_mp_bootpg() helper. + + Match determine_mp_bootpg() that was added for 86xx. We need this to + address a bug introduced in v2009.03 with 86xx MP booting. We have to + make sure to reserve the region of memory used for the MP bootpg() so + other u-boot code doesn't use it. + + Also added a comment about how cpu_reset() is dealing w/an errata on + early 85xx MP HW. + + Signed-off-by: Kumar Gala + +commit 7649a590b53ee548f41428bf20780f74ce9fc099 +Author: Kumar Gala +Date: Tue Mar 31 23:02:38 2009 -0500 + + 86xx: Cleanup MP support + + * Use CONFIG_MP instead of CONFIG_NUM_CPUS to match 85xx + * Introduce determine_mp_bootpg() helper. We'll need this to address a + bug introduced in v2009.03 with 86xx MP booting. We have to make sure + to reserve the region of memory used for the MP bootpg() so other + u-boot code doesn't use it. + * Added dummy versions of cpu_reset(), cpu_status() & cpu_release() to + allow cmd_mp.c to build and work. In the future we should look at + implementing all these functions. This could be common w/85xx if we + use spin tables on 86xx. + + Signed-off-by: Kumar Gala + +commit f6ef8b7a43ed7f68a4bb524faad5e4f75ea3e3e2 +Author: Becky Bruce +Date: Tue Mar 31 18:38:37 2009 -0500 + + mpc8641hpcn/sbc8641d: Add missing board_lmb_reserves + + We're missing the board_lmb_reserve definitions that allow + cpu_mp_lmb_reserve to be called; this means that Linux + is free to reallocate reserved pages. Linux currently boots + because we're getting lucky - the page we've reserved is + high enough in memory that it isn't allocated by Linux + while we still need it to be in existence. + + Signed-off-by: Becky Bruce + Signed-off-by: Kumar Gala + +commit 0fc4f64c59873a47d555dd66bad25797d4ecb0ed +Author: Ladislav Michl +Date: Tue Mar 31 13:43:10 2009 +0200 + + NetStar: fix NAND + + Fix NAND support broken during new NAND code merge. Move those few lines of + code to board/netstar/netstar.c + + Signed-off-by: Ladislav Michl + +commit d144f94d590b5190a9963bd0f2026b2a7ce67eda +Author: Jens Scharsig +Date: Tue Mar 31 08:18:29 2009 +0200 + + soft_i2c.c compiler/linker error + + This patch fix the compiler/linker errors + + common/cmd_i2c.c:1252: undefined reference to `i2c_get_bus_speed' + common/cmd_i2c.c:1256: undefined reference to `i2c_set_bus_speed' + + if board use CONFIG_I2C_CMD_TREE and CONFIG_I2C_MULTI_BUS is not + uesd/undef (wrong define order) + + and + + removes additional empty lines + + Signed-off-by: Jens Scharsig + +commit 765547dc5e0e8cbe6b8f4ea8a5d6ff237935c352 +Author: Haiying Wang +Date: Fri Mar 27 17:02:45 2009 -0400 + + MPC85xx: Add MPC8569MDS board support + + This patch adds MPC8569MDS board support. The UART, QE UEC1 and UEC2, BRD + EEPROM on I2C2 bus, PCI express and DDR3 SPD are supported in this patch. + + Signed-off-by: Haiying Wang + Signed-off-by: Hillel Avni + Signed-off-by: Kumar Gala + +commit 22b6dbc1696d927d938dd4e16f65d83c0d4fb3f4 +Author: Haiying Wang +Date: Fri Mar 27 17:02:44 2009 -0400 + + MPC85xx: Add MPC8569 CPU support + + There is a workaround for MPC8569 CPU Errata, which needs to set Bit 13 of + LBCR in 4K bootpage. We setup a temp TLB for eLBC controller in bootpage, + then invalidate it after LBCR bit 13 is set. + + Signed-off-by: Haiying Wang + Signed-off-by: Kumar Gala + +commit 2d4de6ae5be54b367a72a7ef4e0cf36a9cd4881f +Author: Haiying Wang +Date: Thu Mar 26 17:01:49 2009 -0400 + + MPC85xx: Load and enable QE microcode patch in IRAM + + For the silicon which doesn't have ROM support in QE, it always needs to load + a pre-built ucode binary to IRAM so that QE can work. + + Signed-off-by: Haiying Wang + Signed-off-by: Hillel Avni + +commit 1b3e4044a28a3d95b0aad41bdc52482bb2cc9b2b +Author: Kumar Gala +Date: Thu Mar 19 09:16:10 2009 -0500 + + 85xx: Add support for additional e500mc features + + * Enable backside L2 + * e500mc no longer has timebase enable in HID (moved to CCSR register) + + Signed-off-by: Kumar Gala + +commit c360ceac0286159f94d9d1a9496fc9858c8d9bec +Author: Dave Liu +Date: Sat Mar 14 12:48:30 2009 +0800 + + fsl-ddr: add the DDR3 SPD infrastructure + + - support mirrored DIMMs, not support register DIMMs + - test passed on P2020DS board with MT9JSF12872AY-1G1D1 + - test passed on MPC8569MDS board with MT8JSF12864HY-1G1D1 + + Signed-off-by: Dave Liu + Signed-off-by: Travis Wheatley + +commit 6a8197836702991468cead5ead073f589e2623ad +Author: Dave Liu +Date: Sat Mar 14 12:48:19 2009 +0800 + + fsl-ddr: Fix two bugs in the ddr infrastructure + + 1. wr_lat + UM said the total write latency for DDR2 is equal to + WR_LAT + ADD_LAT, the write latency is CL + ADD_LAT - 1. + so, the WR_LAT = CL - 1; + 2. rd_to_pre + we missed to add the ADD_LAT for DDR2 case. + + Reported-by: Joakim Tjernlund + Signed-off-by: Dave Liu + +commit 540dcf1cb86961e11aa92c47671f27762c581d8c +Author: Kumar Gala +Date: Thu Mar 26 01:34:39 2009 -0500 + + 83xx: Use common LSDMR defines from asm/fsl_lbc.h + + Signed-off-by: Kumar Gala + Acked-by: Kim Phillips + +commit b0fe93eda69721aef1fdef576164b668fad83bbd +Author: Kumar Gala +Date: Thu Mar 26 01:34:38 2009 -0500 + + 85xx: Use common LSDMR defines from asm/fsl_lbc.h + + Signed-off-by: Kumar Gala + +commit 0088c298f0eeb90ec001f744e9959dea83dd563a +Author: Kumar Gala +Date: Thu Mar 26 01:34:37 2009 -0500 + + Add LSDMR (SDRAM Mode Register) definition on localbus + + The masks for various bit defines of LSDMR are common and thus we can + define them in one place rather than replicating them in each config.h + + Signed-off-by: Kumar Gala + +commit 89c00fb15859213788f0ad089934c376fb356099 +Author: Ladislav Michl +Date: Mon Mar 30 18:58:41 2009 +0200 + + OMAP: use {read,write}l to access timer registers + + Signed-off-by: Ladislav Michl + +commit 81472d893fa565c9d300928a40e504a689bde131 +Author: Ladislav Michl +Date: Mon Mar 30 18:58:41 2009 +0200 + + OMAP: rename timer divisor + + Divisor field is called PTV not PVT. + + Signed-off-by: Ladislav Michl + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit fe672d60b2a8c9e803596ba4533fa1776015551d +Author: Ladislav Michl +Date: Mon Mar 30 18:58:40 2009 +0200 + + OMAP: reindent timer code + + Signed-off-by: Ladislav Michl + +commit b3f66b0ba09949e0796ce7fad6367f75f15ed890 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 18:58:40 2009 +0200 + + s3c2410: move nand driver to drivers/mtd/nand + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d3b635774194404bcd424f6b376419bce22076ad +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 18:58:40 2009 +0200 + + s3c24x0: move i2c driver to drivers/i2c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 300f99f4539dd5caf7e19af5e4ea5eb259445913 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 18:58:39 2009 +0200 + + s3c24x0: move serial driver to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 942ba9969b9efa25f816c238861ecb339c54ed73 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 18:58:39 2009 +0200 + + davinci: move i2c driver to drivers/i2c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit ee4f3e2765a1c65c9861c5d2cf2e6feb84b90bd8 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 18:58:39 2009 +0200 + + davinci: move nand driver to drivers/mtd/nand + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d3e55d0774a180c1837bd7ddec464015e883bd86 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Mon Mar 30 18:58:38 2009 +0200 + + imx: move serial driver to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 2344bb8de2354101a8264c2123303c9d8d2aed3c +Author: Detlev Zundel +Date: Mon Mar 30 00:31:36 2009 +0200 + + inka4x0: Use proper accessor macros for memory mapped registers. + + Signed-off-by: Detlev Zundel + +commit e979e85fd39b06436922bb4d6bb5fafcbc775182 +Author: Detlev Zundel +Date: Mon Mar 30 00:31:35 2009 +0200 + + inka4x0: Add hardware diagnosis and RTC in configuration. + + This patch adds the board specific communication routines needed by + the external 4543 RTC. + + Signed-off-by: Detlev Zundel + Signed-off-by: Andreas Pfefferle + +commit 7b5611cdd12ca0cc33f994f0d4a4454788fc3124 +Author: Detlev Zundel +Date: Mon Mar 30 00:31:34 2009 +0200 + + inka4x0: Add hardware diagnosis functions for inka4x0 + + This patch adds advanced diagnosis functions for the inka4x0 board. + + Signed-off-by: Andreas Pfefferle + Signed-off-by: Detlev Zundel + +commit 04e11cf383ff6231535fd981023bb1306b2133d4 +Author: Detlev Zundel +Date: Mon Mar 30 00:31:33 2009 +0200 + + rtc: add support for 4543 RTC (manufactured by e.g. EPSON) + + Signed-off-by: Detlev Zundel + Signed-off-by: Andreas Pfefferle + +commit 572e6179adb5447ff42ec2aa5cf3a26decf97583 +Author: Detlev Zundel +Date: Mon Mar 30 00:31:32 2009 +0200 + + drivers/twserial: Add protocol driver for "three wire serial" interface. + + This pretty unintelligent interface is used on some RTC chips. + + Signed-off-by: Detlev Zundel + +commit a6ef3ddeafbe8007af3662cc4509b897c53ab395 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:42 2009 +0200 + + arm720t/clps7111: move serial driver to drivers/serial + + add CONFIG_CLPS7111_SERIAL to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6790c55704531eb98f76b51d50e0f73d19fa2988 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:42 2009 +0200 + + lpc2292: move serial driver to drivers/serial + + add CONFIG_LPC2292_SERIAL to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 176a600d0ecdaccbac483d2ba992d0119f853119 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:42 2009 +0200 + + ks8695: move serial driver to drivers/serial + + add CONFIG_KS8695_SERIAL to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 6d27bca15d445fcf07d6e7e30ced95c945c875ea +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:42 2009 +0200 + + s3c64xx: move usb driver to drivers/usb + + add CONFIG_USB_S3C64XX to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit ecfa8dda2f55e1fbe12dee0b5cc16e7d484674c9 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:41 2009 +0200 + + imx31: move serial driver to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 9ea91c9fefb3920d735533a7798c1a44a3ed3ffc +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:41 2009 +0200 + + netarm: move serial driver to drivers/serial + + add CONFIG_NETARM_SERIAL to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 412ab705888742add435dd6ffc2e8bda14962235 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:41 2009 +0200 + + sa1100: move serial driver to drivers/serial + + add CONFIG_SA1100_SERIAL to activate the driver + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit b2368754a9202225fd072e159fb78da7d2cdb623 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:41 2009 +0200 + + s3c44b0: extract cache from cpu.c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 40fd626223eae5363719bcb9a6896f08ceeee90a +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:41 2009 +0200 + + s3c44b0: move serial driver to drivers/serial + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 5fe1377cc46199fe71c47be4b1aa81440ae96f9f +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:40 2009 +0200 + + s3c44b0: move rtc driver to drivers/rtc + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 50f601cca8985615f9e3de4c34887448ade8a64b +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:40 2009 +0200 + + s3c44b0: move i2c driver to drivers/i2c + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 281dfb0c0c531194f99e60d6285cca4e2a9fb1b6 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 29 23:01:36 2009 +0200 + + s3c4510b: move specific code to soc directory + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 04531f3c11c693dc54924f82c41979d960309c9d +Author: Ladislav Michl +Date: Wed Mar 25 23:43:58 2009 +0100 + + NetStar: add RTC support + + Add RTC support. + + Signed-off-by: Ladislav Michl + +commit 71f7bd305d9768bcb7ddbe4b5823cbf3b3597b11 +Author: Ladislav Michl +Date: Wed Mar 25 23:43:50 2009 +0100 + + NetStar: use generic flash driver + + Signed-off-by: Ladislav Michl + +commit 3f464b0fc009d41d2734c08e472eb6d445f73a5c +Author: Ladislav Michl +Date: Mon Mar 16 23:31:20 2009 +0100 + + NetStar: update crcit utility + + Make crc32 function to match its prototype. Use more meaningful identifiers. + + Signed-off-by: Ladislav Michl + +commit 488f5d8790c451fc527fe5d2ef218f2a5e40ea17 +Author: Ladislav Michl +Date: Mon Mar 23 17:46:27 2009 +0100 + + Remove nowhere used symbol CONFIG_SYS_CLKS_IN_HZ + + Signed-off-by: Ladislav Michl + +commit 88685b5f62274167ad2ba8a58e108d89ff71955b +Author: Wolfgang Denk +Date: Sun Mar 29 00:58:16 2009 +0100 + + VCMA9: fix compile errors + + Fix these: + cmd_vcma9.c:82: warning: implicit declaration of function 'eth_getenv_enetaddr' + cmd_vcma9.c:89: error: 'enetaddr' undeclared (first use in this function) + + Signed-off-by: Wolfgang Denk + +commit 26e42cbd786241fec370a0b92ad591f4e9cc423b +Author: Wolfgang Denk +Date: Sun Mar 29 00:54:21 2009 +0100 + + ARM: fix warning: 'print_eth' defined but not used + + This warning got issued for all ARM systems that don't have + CONFIG_CMD_NET enabled. + + Signed-off-by: Wolfgang Denk + +commit fd88d91a639ce41b825c8d50dc2182050e98fe53 +Author: Ladislav Michl +Date: Mon Mar 23 18:16:34 2009 +0100 + + cs8900 compile fix + + cs8900.c: In function 'eth_init': + cs8900.c:164: warning: passing argument 2 of 'eth_getenv_enetaddr' from incompatible pointer type + cs8900.c:165: error: invalid operands to binary << + cs8900.c:166: error: invalid operands to binary << + cs8900.c:167: error: invalid operands to binary << + + Signed-off-by: Ladislav Michl + Acked-by: Jean-Christophe PLAGNIOL-VILLARD + +commit d2567be915036720693f3ddd00c39b5b4d86fb8d +Author: Wolfgang Denk +Date: Sat Mar 28 20:16:16 2009 +0100 + + Fix implicit declaration of function 'eth_[gs]etenv_enetaddr' + + ...and some other compile warnings. + + Signed-off-by: Wolfgang Denk + +commit 97b05d7d524a6b4f195f07b8f90e98561a85596c +Author: Wolfgang Denk +Date: Sat Mar 28 16:17:29 2009 +0100 + + mpc8xx/ether.c: fix warning: unused variable 'bd' + + Also minor coding style cleanup. + + Signed-off-by: Wolfgang Denk + +commit 2dce551e10728f9e5655279f761f1d3cc0a8fe90 +Author: Detlev Zundel +Date: Wed Mar 25 17:27:52 2009 +0100 + + command.c: Expose the core of do_help as _do_help to the rest of u-boot. + + Other commands implementing subcommands can reuse this code nicely. + + Signed-off-by: Detlev Zundel + Signed-off-by: Andreas Pfefferle + +commit 4e325fbfa4dea04eceb6392e00807c40d214dc6f +Author: Detlev Zundel +Date: Tue Mar 24 18:02:33 2009 +0100 + + mpc5xxx: Add structure definition for several more register blocks. + + Signed-off-by: Detlev Zundel + +commit 739b0e594677a0676577bc95db4495a5563fc7f8 +Author: Detlev Zundel +Date: Fri Mar 27 15:03:55 2009 +0100 + + MAINTAINERS: Add entry for 'inka4x0' board. + + Signed-off-by: Detlev Zundel + +commit e55ecec45340755ef47cbbb13fb35ceed60eb115 +Author: Detlev Zundel +Date: Fri Mar 27 15:03:54 2009 +0100 + + MAINTAINERS: Keep list sorted. + + Signed-off-by: Detlev Zundel + +commit 0baeca4b09b703728f8e66b52418039fd8f8ce35 +Author: Mike Frysinger +Date: Thu Mar 26 11:17:41 2009 -0400 + + karef/metrobox/xpedite1k: fix eth_setenv_enetaddr typos + + The function is called "eth_setenv_enetaddr", not "eth_putenv_enetaddr". + + Signed-off-by: Mike Frysinger + CC: Ben Warren + +commit 76756e41cde0a617e781a604cc47dfaef63697cd +Author: Heiko Schocher +Date: Thu Mar 26 07:33:59 2009 +0100 + + ppc: cleanup compiler errors/warnings + + Current u-boot top of tree builds with warnings/errors for + the following boards: + + ads5121 cpci5200 mecp5200 v38b IAD210 MBX MBX860T NX823 + RPXClassic debris PN62 + + following patch solves this. + + Signed-off-by: Heiko Schocher + Acked-by: Mike Frysinger + +commit 3edf68c47fdd52f19c1e840771c19ba90cf5ced1 +Author: Stefan Roese +Date: Thu Mar 26 16:14:13 2009 +0100 + + ppc4xx: Sequoia: Fix TLB reassignment in NAND booting code + + This patch fixes a bug in the Sequoia TLB init code to reconfigure + the correct TLB (boot space) after running from RAM. This bug was + introduced with patch 4d332dbeb08f5863d1ea69d91a00c5499d3a87ed + [ppc4xx: Make Sequoia boot vxWorks] which changed the order of the + TLB in the Sequoia init.S file. + + Signed-off-by: Stefan Roese + +commit e2b66fe453a3679f807b37fc5923d89214302764 +Author: Wolfgang Denk +Date: Thu Mar 26 10:00:57 2009 +0100 + + ads5121: enable instruction cache + + Enabling the instruction cache significantly accelerates U-Boot + operations like CRC checking, image uncompression, etc. + + Kudos to Andrea Scian for pointing out. + + Signed-off-by: Wolfgang Denk + +commit 33e88c557b29c84c52039ba05993fa70fe62afe3 +Author: Jon Smirl +Date: Sun Mar 22 22:55:45 2009 -0400 + + mpc5200: suppress printf until console initialized + + On boards which have the environment in eeprom, i2c_init() is called + before the console and RAM are initialized. + Suppress printfs until the console is initialized. + + Signed-off-by: Jon Smirl + Acked-by: Heiko Schocher + +commit 0c6926736effbb9a19047949b7e9b3e8feab7c46 +Author: Guennadi Liakhovetski +Date: Wed Mar 25 11:36:50 2009 +0100 + + ARM: Add the imx31_phycore_eet board to MAKEALL + + Signed-off-by: Guennadi Liakhovetski + +commit 917cfc70c18b74fa8a80189bdce8395199fa8360 +Author: Nishanth Menon +Date: Wed Mar 25 22:13:56 2009 +0100 + + OMAP3:Beagle: Enable mtdparts + + http://www.denx.de/wiki/DULG/UBootCmdGroupFlash#UBootCmdFlMtdparts + provides a flexible way to create and maintain u-boot mtd + partitions. This allows commands such as "nand erase fs" + to work and the user no longer needs to decode the absolute + nand offsets. This patch enables this function for beagleboard + + Signed-off-by: Nishanth Menon + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 4de1a5daab079ddc8ce1274144700203d692105c +Author: Mike Frysinger +Date: Sun Feb 22 16:26:35 2009 -0500 + + Blackfin: bf537-stamp: split post code out into dedicated post.c + + Signed-off-by: Mike Frysinger + +commit 5e8f245743ed14c89e495ba2c027703db9813160 +Author: Mike Frysinger +Date: Sat Oct 11 22:51:56 2008 -0400 + + Blackfin: add support for S25FL128 parts + + Signed-off-by: Mike Frysinger + +commit bf1e028bf3eab1d702fa0627cade4460688f3913 +Author: Mike Frysinger +Date: Sat Oct 11 22:51:23 2008 -0400 + + Blackfin: overhaul SPI flash handling to speed things up + + Signed-off-by: Mike Frysinger + +commit efcc08cededa2168b96f12a22a5872340880d334 +Author: Mike Frysinger +Date: Sat Oct 11 22:51:05 2008 -0400 + + Blackfin: add support for SST SPI flashes + + Signed-off-by: Mike Frysinger + +commit 5b8cfbe63f7242ebb1008f30bbbc85a9d54b38cf +Author: Mike Frysinger +Date: Sat Oct 11 22:50:10 2008 -0400 + + Blackfin: add hack for crappy m25p80 + + Signed-off-by: Mike Frysinger + +commit 6f5fd56f0832ea5c254e2e4be84ea21fc8ecd5c5 +Author: Mike Frysinger +Date: Wed Jan 21 20:47:12 2009 -0500 + + Blackfin: bf537-stamp: increase monitor size + + The new jffs2 code pushed the code size just over the limit, so increase + the limit a bit more. + + Signed-off-by: Mike Frysinger + +commit f82caaccc87e1f76448ff42a6b930e59797e4f65 +Author: Mike Frysinger +Date: Mon Dec 8 16:16:11 2008 -0500 + + Blackfin: bf537-stamp: bump default SCLK up to 125MHz + + Since all of the bf537-stamp and bf537-ezkit boards out there can handle it, + increase the speed of SCLK to 125MHz rather than 100MHz. + + Signed-off-by: Mike Frysinger + +commit 751e54c3b77311b720b794813cce20546f288ada +Author: Mike Frysinger +Date: Sat Oct 11 22:44:14 2008 -0400 + + Blackfin: bf537-stamp: rewrite MAC-in-flash handling + + Use the common net eth functions to setup the env/global data with the MAC + address, and properly handle the case where CONFIG_SYS_NO_FLASH is defined. + + Signed-off-by: Mike Frysinger + +commit 88f9faffb383bbc6f23b8cc8519c5ffecfa2c8ad +Author: Mike Frysinger +Date: Tue Dec 9 13:47:39 2008 -0500 + + Blackfin: add clkin_hz= to default kernel command line for ADI boards + + Signed-off-by: Mike Frysinger + +commit 9f64ba2412d3cede9eb1f290987e5c3a28df3232 +Author: Mike Frysinger +Date: Sun Oct 12 23:49:13 2008 -0400 + + Blackfin: bf533-stamp: bump up default clocks + + Since the hardware can handle it, bump the default clocks from 80mhz SCLK + and 398mhz CCLK to 100mhz SCLK and 498mhz CCLK. + + Signed-off-by: Mike Frysinger + +commit 23fd959eeaaa0434ac7f9c1191de66c76d97d699 +Author: Mike Frysinger +Date: Sat Oct 11 22:40:22 2008 -0400 + + Blackfin: bf533-stamp: rewrite startup LED notifications + + Again, don't clobber pins that we aren't actually using, and use the common + LED framework rather than our own hob-job-but-not-really-working. + + Signed-off-by: Mike Frysinger + +commit cf6f469e2730fc8ab3523808b828be000d6eee77 +Author: Mike Frysinger +Date: Sun Jun 1 09:09:48 2008 -0400 + + Blackfin: unify common ADI board settings + + Rather than duplicate the same ADI settings in every ADI board, create a + common ADI config header and have all ADI boards start using that. This + will also make merging the ~10 boards I have to forward port a lot easier. + + Signed-off-by: Mike Frysinger + +commit 196c74311f394c6eb08bd9ab07a35671299b9851 +Author: Kyungmin Park +Date: Tue Mar 3 09:05:53 2009 +0900 + + Reduce OneNAND IPL common code + + OneNAND IPL has common codes for RAM init, load data, and jump to 2nd + bootloader, but it's common code used about 300~400 bytes. So board + specific codes, such as lowlevel_init, can't has enough code. It make + a difficult to implement OneNAND IPL. + + his patch make this common code as small as possible. and give + lowlevel_init can have more codes. + + Signed-off-by: Kyungmin Park + Signed-off-by: Scott Wood + +commit 16f2f5a351004129e79e79816697a367fd9e5446 +Author: Wolfgang Grandegger +Date: Wed Feb 11 18:38:24 2009 +0100 + + Add multi-chip NAND support for the TQM8548 modules + + This patches configures the NAND UPM-FSL driver with multi-chip + support for the Micron MT29F8G08FAB NAND flash memory on the + TQM8548 modules. + + Signed-off-by: Wolfgang Grandegger + Signed-off-by: Scott Wood + +commit 33846df28fa1f4cf96a96c18142d48d813caa892 +Author: Wolfgang Grandegger +Date: Wed Feb 11 18:38:23 2009 +0100 + + Add wait flags to support board/chip specific delays + + The NAND flash on the TQM8548_BE modules requires a short delay after + running the UPM pattern like the MPC8360ERDK board does. The TQM8548_BE + requires a further short delay after writing out a buffer. Normally the + R/B pin should be checked, but it's not connected on the TQM8548_BE. + The corresponding Linux FSL UPM driver uses similar delay points at the + same locations. To manage these extra delays in a more general way, I + introduced the "wait_flags" field allowing the board-specific driver to + specify various types of extra delay. + + Signed-off-by: Wolfgang Grandegger + Signed-off-by: Scott Wood + +commit 06e9f7df054d26d7f49c56bf9a6844b193ad6313 +Author: Wolfgang Grandegger +Date: Wed Feb 11 18:38:22 2009 +0100 + + Add support for TQM-specific chip select logic to FSL-UPM + + For the NAND chips on the TQM8548 modules, a special chip-select logic is + used. It uses dedicated address lines to be set via UPM machine address + register (mar). This patch adds such support to the FSL-UPM driver. + + Signed-off-by: Wolfgang Grandegger + Signed-off-by: Scott Wood + +commit e93c1c169d49eda7babad9c781f541e2e34f0ff0 +Author: Wolfgang Grandegger +Date: Wed Feb 11 18:38:21 2009 +0100 + + Add multi chip support to the FSL-UPM driver + + This patch adds support for multi-chip NAND devices to the FSL-UPM + driver. The "dev_ready" callback of the "struct fsl_upm_nand" is now + called with the argument "chip_nr" to allow testing the proper chip + select line. The NAND support of the MPC8360ERDK is updated as well. + No other boards are currently using the FSL UPM driver. + + Signed-off-by: Wolfgang Grandegger + Signed-off-by: Scott Wood + +commit 672ed2aee91b4856f6671fc72cd34168d8f1b624 +Author: Wolfgang Grandegger +Date: Wed Feb 11 18:38:20 2009 +0100 + + Enable multi chip support in the NAND layer + + This patch adds support for NAND_MAX_CHIPS to the MTD NAND layer. + Multi-chips devices are displayed as shown: + + Device 0: 2x NAND 512MiB 3,3V 8-bit, sector size 128 KiB + + Signed-off-by: Wolfgang Grandegger + Signed-off-by: Scott Wood + +commit 74398b23f9c2ffdc137fd92910a46e3333fb93f9 +Author: Mike Frysinger +Date: Sat Oct 11 21:58:33 2008 -0400 + + Blackfin: put memory into self-refresh before/after programming clocks + + When initializing the core clocks, stick external memory into self-refresh. + This gains us a few cool things: + - support suspend-to-RAM with Linux + - reprogram clocks automatically when doing "go" on u-boot.bin in RAM + - make sure settings are stable before flashing new version + - finally fully unify initialize startup code path between LDR/non-LDR + + Signed-off-by: Mike Frysinger + +commit d347d572ab1f2d47bf257c9f7ca2e602038a136b +Author: Mike Frysinger +Date: Sat Oct 11 21:56:08 2008 -0400 + + Blackfin: do not program voltage regulator on parts that do not have one + + Some newer Blackfins (like the BF51x) do not have an on-chip voltage + regulator, so do not attempt to program the memory as if it does. + + Signed-off-by: Mike Frysinger + +commit 0d4f24b70f7a979f58174f3eb271874950b551b6 +Author: Mike Frysinger +Date: Sun Jun 1 01:28:24 2008 -0400 + + Blackfin: setup a sane default EBIU_SDBCTL for SDRAM controllers + + If the board config does not specify an explicit EBIU_SDBCTL value, set it + up with sane values based on other configuration options. + + Signed-off-by: Mike Frysinger + +commit 3986e981f565c08f10c7e526af8cb518d741c349 +Author: Mike Frysinger +Date: Sat Dec 6 18:06:58 2008 -0500 + + Blackfin: handle reboot anomaly 432 + + Workaround anomaly 432: + The bfrom_SysControl() firmware function does not clear the SIC_IWR1 + register before executing the PLL programming sequence. Therefore, any + interrupt enabled in the SIC_IWR1 register prior to the call to + bfrom_SysControl() can prematurely terminate the idle sequence required + for the PLL to relock properly. SIC_IWR0 is properly handled. + + Signed-off-by: Mike Frysinger + +commit 7e1d212b6da492c6ea32c62af92e185284f41291 +Author: Mike Frysinger +Date: Sat Oct 18 04:04:49 2008 -0400 + + Blackfin: kill off LDR jump block + + The Boot ROM uses EVT1 as the entry point so set that rather than having + to use a tiny jump block in the default EVT1 location. + + Signed-off-by: Mike Frysinger + +commit a75fa148d60b1975403441e45565621bba50d2d9 +Author: Mike Frysinger +Date: Tue Jan 6 10:00:48 2009 -0500 + + Blackfin: simplify symbol_lookup() a bit + + No need to skip a byte as the symbol table handles this. + + Signed-off-by: Mike Frysinger + +commit 59f0978a7e78d20277ddbde7caf0ea877f3cfd98 +Author: Mike Frysinger +Date: Sat Feb 7 05:43:21 2009 -0500 + + Blackfin: fix SIC_RVECT definition: it is 16bits, not 32bits + + Signed-off-by: Mike Frysinger + +commit 58130f8920151d9e8942bbdf3388f2defb47e415 +Author: Mike Frysinger +Date: Sat Feb 7 05:41:17 2009 -0500 + + Blackfin: drop SPORT_TX read helper macros + + The SPORT_TX registers cannot be read (the hardware will trigger an error), + so drop the read helper macros. + + Signed-off-by: Mike Frysinger + +commit 820b076c449688bcd4af6db5a33ae424d1a60d0e +Author: Mike Frysinger +Date: Sat Feb 7 05:25:35 2009 -0500 + + Blackfin: unify duplicate CPU port definitions + + Signed-off-by: Mike Frysinger + +commit 744fd240d181b0b05b1436e1b655c9a62526c752 +Author: Mike Frysinger +Date: Fri Feb 6 00:59:50 2009 -0500 + + Blackfin: drop now-unused CONFIG_SYS_BFIN_CMD_XXX + + With the new CONFIG_XXX system and CONFIG_CMD_XXX handling, these defines + are no longer used/needed. + + Signed-off-by: Mike Frysinger + +commit 45c48953e8a4038bd49c46813fcff5a207867ae4 +Author: Mike Frysinger +Date: Mon Oct 6 04:01:26 2008 -0400 + + Blackfin: print out Flash: before checking it + + If there is some problem in the flash init/checking code, it's nicer to see + the message "Flash:" before crashing. This way the source of the problem + is a bit more straightforward. + + Signed-off-by: Mike Frysinger + +commit 1c7a79a04eb916f685f7275520b5eea6968a1559 +Author: Mike Frysinger +Date: Thu Aug 7 15:33:09 2008 -0400 + + Blackfin: safely flush data caches when in writeback mode + + Signed-off-by: Mike Frysinger + +commit c06f2b13022703611bc3e512bd34f9014a46f448 +Author: Mike Frysinger +Date: Thu Aug 7 13:21:48 2008 -0400 + + Blackfin: update lockbox api according to latest documentation + + Signed-off-by: Mike Frysinger + +commit 2decc2a8d17a5397cb5956e46c8466c736e305a2 +Author: Mike Frysinger +Date: Sat Oct 11 21:49:06 2008 -0400 + + Blackfin: mark bfin_reset static + + The function is only used locally, so mark it static. + + Signed-off-by: Mike Frysinger + +commit 974473caa732f63312687ef2bd2d22dad8e99b9a +Author: Sonic Zhang +Date: Fri Mar 20 19:28:20 2009 -0400 + + Blackfin: spi: there is no PORTJ_FER MMR on BF537 + + Since the PORTJ on the BF537 is peripheral-only (no GPIO functionality), + then there is no PORTJ_FER register for us to worry about. + + Signed-off-by: Sonic Zhang + Signed-off-by: Mike Frysinger + +commit e82b762f293debc53c5afa90f37264f6b07520f9 +Author: Mike Frysinger +Date: Tue Mar 17 13:58:23 2009 -0400 + + Blackfin: fix jtag console tstc + + The jtag tstc operation was checking the hardware to see if data is + available from it (which is fine for the jtag getc operation), but the + higher layers need to know whether any data is available. Since we have + to read up to 4 bytes at a time from the hardware, the higher layers need + to know they can consume the cached bytes as well. + + Signed-off-by: Mike Frysinger + +commit bc683f58b1f1d8d20546fe019483967a51a49df1 +Author: Mike Frysinger +Date: Sun Feb 22 16:23:41 2009 -0500 + + Blackfin: bf537-stamp: move CONFIG_POST handling to COBJS-$(...) + + Signed-off-by: Mike Frysinger + +commit 8996d1608acb8f59fcb186dc7ed7d87f8fee1297 +Author: Mike Frysinger +Date: Sun Feb 22 16:02:27 2009 -0500 + + Blackfin: unify net-related init code + + Unify all of the net-related init code in the common Blackfin board init + code to clean up the ifdef mess a bit. + + Signed-off-by: Mike Frysinger + +commit c6ea30e52ea82af4858d2b6f99e0fd2ea276d657 +Author: Mike Frysinger +Date: Wed Feb 18 12:51:48 2009 -0500 + + Blackfin: fix SWRST/SYSCR register sizes + + Signed-off-by: Mike Frysinger + +commit a9d6777d39154978b9ef9c682b2627a3480b194c +Author: Mike Frysinger +Date: Wed Feb 18 12:51:31 2009 -0500 + + Blackfin: update anomaly lists + + Signed-off-by: Mike Frysinger + +commit 4d7c32dad2e787f890ebcd51bfb723a126913c90 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Thu Mar 19 18:31:38 2009 +0100 + + avr32: fix cacheflush.h location introducted by d8f2aa3298610b + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + Signed-off-by: Haavard Skinnemoen + +commit 3a3baf3ee61e6b28af3b49ebabc9ab4f6015aa48 +Author: Eric Schumann +Date: Sat Mar 21 09:59:34 2009 -0400 + + Make flash protection work, when the environment is in EEPROM + + On the pcm030 the environment is located in the onboard EEPROM. But we want + to handle flash sector protection in a safe manner. So we must read the + unlock environment variable from EEPROM instead from flash. + + This patch is required as long the evironment is saved into the EEPROM. + + Stefan: Additional change as suggested by Wolfgang, use bigger char array + (instead of 4). + + Signed-off-by: Eric Schumann + Signed-off-by: Sascha Hauer + Acked-by: Wolfgang Denk + Signed-off-by: Stefan Roese + +commit de3ce8c59f48f99779d7d7379a5432ded12ec06c +Author: Jon Smirl +Date: Sat Mar 21 11:17:56 2009 -0400 + + Add define for mpc5200 CDM_CLK_ENA + + Signed-off-by: Jon Smirl + +commit df486b1fa3f750b153eac7daa0b3bf1f594e5098 +Author: Nicolas Ferre +Date: Sun Mar 22 14:48:16 2009 +0100 + + at91: Support for the at91sam9g20 : Atmel 400Mhz ARM 926ej-s SOC. + + AT91sam9g20 is an evolution of the at91sam9260 with a faster clock speed. + + The AT91SAM9G20-EK board is an updated revision of the AT91SAM9260-EK board. + It is essentially the same, with a few minor differences. + + Here is the chip page on Atmel website: + http://www.atmel.com/dyn/products/product_card.asp?part_id=4337 + + Signed-off-by: Justin Waters + Signed-off-by: Nicolas Ferre + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 118d168035cc93f586da4812c89cb153eb9f4243 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 22 14:28:14 2009 +0100 + + cmc_pu2: fix implicit declaration of function 'eth_setenv_enetaddr' + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 176c4a982c6531f96426afaa1126cf9a5e2d5e03 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 22 14:28:13 2009 +0100 + + cmc_pu2: fix misc_init_r prototype + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 53158aea995221706b42c7bad9f717b31ae20414 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Jan 11 03:32:01 2009 +0100 + + at91sam9xeek: fix soc name + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 74c076d6c33d6d42ab065541a38383587879e7b7 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sun Mar 22 10:22:34 2009 +0100 + + at91sam9/at91cap: move nand drivers to drivers/mtd/nand + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 163966087d62680547f188a93c61d01c8155254e +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Mar 21 21:08:01 2009 +0100 + + atmel/at91/boards: compile dataflash partition only when dataflash is + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e2c0476f958f8e0b269a1118f4ba4a5cd475aa56 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Mar 21 21:08:00 2009 +0100 + + at91sam9/at91cap: move common macb initialisation to cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit f3f91f886bc8927fd692ac411b7423a87ffec532 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Mar 21 21:08:00 2009 +0100 + + at91sam9/at91cap: move common usb host initialisation to cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit a484b00b86e72ac6da6ee4fce13dbc6b256672fe +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Mar 21 21:08:00 2009 +0100 + + at91sam9/at91cap: move common led management to cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 7ebafb7ec1a0285af8380623c009576f92583b98 +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Mar 21 21:07:59 2009 +0100 + + at91sam9/at91cap: move common spi initialisation to cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit 1332a2a0694c8e10a5bade397cf83645b2c3fd7e +Author: Jean-Christophe PLAGNIOL-VILLARD +Date: Sat Mar 21 21:07:59 2009 +0100 + + at91sam9/at91cap: move common serial initialisation to cpu + + Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD + +commit e60beb13cf0135dc71c541021487b5ccc4d269cb +Author: Wolfgang Denk +Date: Sat Mar 21 22:04:41 2009 +0100 + + Prepare 2009.03 + + Update CHANGELOG + + Signed-off-by: Wolfgang Denk + +commit 9e78dae2b276c5bf9ab92cd85173f6cb92b1b7d5 +Author: Vivek Kutal +Date: Mon Feb 23 21:35:11 2009 +0530 + + Replaced endpoint numbers with appropriate macros in usbtty.c. + + Signed-off-by: Vivek Kutal + Signed-off-by: Remy Bohmer + +commit faac4fd852e39cb1d7a740801b060e41aeacef1f +Author: Michael Lawnick +Date: Thu Mar 19 10:06:41 2009 +0100 + + UBIFS: Missing offset relocation for compressor 'none' + + On systems where U-Boot is linked to another address than it really lays + (e.g. backup image), calls via function pointers must be fixed with a + '+= gd->reloc_off'. + This was not done for none_compr in ubifs_compressors_init() what leads + to system crash on ubifsmount command. + + Signed-off-by: Michael Lawnick + Acked-by: Stefan Roese + +commit ce6d0c8de031f345bde745f3b855082adf1c4e45 +Author: Stefan Roese +Date: Thu Mar 19 15:35:50 2009 +0100 + + UBIFS: Add UBIFS commands + + This patchset adds these UBIFS related commands: + + - ubifsmount + Mount an UBIFS volume + + - ubifsls + List a directory of the mounted UBIFS volume + + - ubifsload + Load a file from the mounted UBIFS volume to memory + + Signed-off-by: Stefan Roese + +commit 9eefe2a2b37a838558e3d213a9f5519503d0c180 +Author: Stefan Roese +Date: Thu Mar 19 15:35:05 2009 +0100 + + UBIFS: Implement read-only UBIFS support in U-Boot + + The U-Boot UBIFS implementation is largely a direct copy from the current + Linux version (2.6.29-rc6). As already done in the UBI version we have an + "abstraction layer" to redefine or remove some OS calls (e.g. mutex_lock() + ...). This makes it possible to use the original Linux code with very + little changes. And by this we can better update to later Linux versions. + + I removed some of the Linux features that are not used in the U-Boot + version (e.g. garbage-collection, write support). + + Signed-off-by: Stefan Roese + CC: Artem Bityutskiy + CC: Adrian Hunter + +commit b1b4e89a0f3b75854c39a62cae41bad56d210adf +Author: Stefan Roese +Date: Thu Mar 19 15:34:56 2009 +0100 + + Add LZO decompressor support + + This patch adds LZO decompression support to U-Boot. It is needed for + the upcoming UBIFS support, since UBIFS uses LZO as default compressor/ + decompressor. Since we only support read-only in UBIFS, only the + decompressor is needed. + + All this is copied with minor changes from the current Linux kernel + version (2.6.28-rc8). + + This patch only implements this LZO decompressor support for PPC. + Other platforms using UBIFS will have to add the required + "include/asm/unaligned.h" as well. It should be fairly easy to copy this + from the Linux source tree as I have done it for PPC in this patch. + + Signed-off-by: Stefan Roese + +commit 68d7d65100e84df00bca971c114092731b441090 +Author: Stefan Roese +Date: Thu Mar 19 13:30:36 2009 +0100 + + Separate mtdparts command from jffs2 + + Currently the mtdparts commands are included in the jffs2 command support. + This doesn't make sense anymore since other commands (e.g. UBI) use this + infrastructure as well now. This patch separates the mtdparts commands from + the jffs2 commands making it possible to only select mtdparts when no JFFS2 + support is needed. + + Signed-off-by: Stefan Roese + Signed-off-by: Kyungmin Park + +commit 02a301cd5087eaffdf456e0a5cec1100c4d9a398 +Author: Stefan Roese +Date: Wed Feb 25 12:11:15 2009 +0100 + + powerpc: Only use eth_getenv_enetaddr() if networking is enabled + + Signed-off-by: Stefan Roese + +commit 5c4fa9b474af95d60f019ec6369cbe77b9dab4b5 +Author: Grzegorz Bernacki +Date: Tue Mar 17 10:06:40 2009 +0100 + + Add support for the digsy MTC board. + + This is the InterControl custom device based on the MPC5200B chip. + + Signed-off-by: Grzegorz Bernacki + +commit ff7dc067369e30066744f096995aef7d97574d15 +Author: Stefan Roese +Date: Mon Feb 23 16:52:36 2009 +0100 + + powerpc: Fix compilation warning in board.c + + Fix this warning: + + board.c: In function 'board_init_r': + board.c:653: warning: unused variable 'i' + board.c:651: warning: unused variable 'e' + + Signed-off-by: Stefan Roese + +commit 9cd690160d3ce1a7fb4ceeee6c99cedb1ac1d49c +Author: Stefan Roese +Date: Mon Feb 23 16:42:51 2009 +0100 + + ppc4xx: Don't write the MAC address into the internal SoC registers + + Remove this code. It's not needed. The 4xx EMAC driver stores the MAC + addresses into the SoC registers instead. + + Signed-off-by: Stefan Roese + +commit bb57ad4be76d0e2e7f9ec56678235cc9872ff40f +Author: Matthias Fuchs +Date: Fri Feb 20 10:19:19 2009 +0100 + + ppc4xx: Use correct io accessors for esd 405/440 boards + + This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32 + macros. Also volatile pointer references are replaced by the + new accessors. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 049216f045fd8e0f45bcef121c2bb1c7d3de6988 +Author: Matthias Fuchs +Date: Fri Feb 20 10:19:18 2009 +0100 + + ppc4xx: Use correct io accessors for esd 405 boards + + This patch replaces in/out8/16/32 macros by in/out_8/_be16/_be32 + macros. Also volatile pointer references are replaced by the + new accessors. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit a59205d1519375d027f97a545ad642ab20fce6f8 +Author: Matthias Fuchs +Date: Fri Feb 20 10:19:17 2009 +0100 + + ppc4xx: Cleanup linker scripts of esd 4xx boards + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 2f103ee284e68934a648732db5e0b6ceb4a1ed8f +Author: Matthias Fuchs +Date: Fri Feb 20 10:19:16 2009 +0100 + + ppc4xx: Update TEXT_BASE for DASA_SIM boards + + Fix building DASA_SIM boards by increasing U-Boot's size in flash. + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 09db8f4de6805f1dde510c167f20e56a5405d29e +Author: Matthias Fuchs +Date: Fri Feb 20 10:19:15 2009 +0100 + + ppc4xx: DU405 maintenance fix + + -strip unused features + -fix resetting phy + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit 75511b47ac2647be48218dbb93af05b21f404f67 +Author: Matthias Fuchs +Date: Fri Feb 20 10:19:14 2009 +0100 + + ppc4xx: Abort autoboot only by space key on CPCI405 boards + + Signed-off-by: Matthias Fuchs + Signed-off-by: Stefan Roese + +commit e17ee157ca9ff0d4cc5841d06c4b70c1603df29c +Author: Graeme Russ +Date: Tue Feb 24 21:14:56 2009 +1100 + + Add basic relocation to i386 port + + Signed-off-by: Graeme Russ + +commit 8c63d47651f77d9fb887cad433370b866eb0a193 +Author: Graeme Russ +Date: Tue Feb 24 21:14:45 2009 +1100 + + Implement SC520 timers + + Signed-off-by: Graeme Russ + +commit 6d7f610b09f813b1239eedcbfe921cfd439aea25 +Author: Graeme Russ +Date: Tue Feb 24 21:14:32 2009 +1100 + + Factor out SC520 sub-features + + Moved sub-features of the SC520 code which is currently selectively compiled + using #ifdef out of sc520.c into individual files selectively compiled via + the makefile + + Signed-off-by: Graeme Russ + +commit abf0cd3dff227cfb6e82ad13be62e28e6e89d5df +Author: Graeme Russ +Date: Tue Feb 24 21:13:40 2009 +1100 + + Rewrite i386 interrupt handling + + Rewrite interrupt handling functionality for the i386 port. Separated + functionality into separate CPU and Architecture components. + + It appears as if the i386 interrupt handler functionality was intended + to allow multiple handlers to be installed for a given interrupt. + Unfortunately, this functionality was not fully implemented and also + had the problem that irq_free_handler() does not allow the passing + of the handler function pointer and therefore could never be used to + free specific handlers that had been installed for a given IRQ. + + There were also various issues with array bounds not being fully + tested. + + I had two objectives in mind for the new implementation: + + 1) Keep the implementation as similar as possible to existing + implementations. To that end, I have used the leon2/3 + implementations as the reference + + 2) Seperate CPU and Architecture specific elements. All specific i386 + interrupt functionality is now in cpu/i386/ with the high level + API and architecture specific code in lib_i386. Functionality + specific to the PC/AT architecture (i.e. cascaded i8259 PICs) has + been further split out into an individual file to allow for the + implementation of the PIC architecture of the SC520 CPU (supports + more IRQs) + + Signed-off-by: Graeme Russ + +commit ece444b42b71eb5bce34a24ec584573b3c8c4a98 +Author: Graeme Russ +Date: Tue Feb 24 21:12:35 2009 +1100 + + Move ali512x.h + + Moved ali512x.h from include/asm-i386/ic/ to /include + + Signed-off-by: Graeme Russ + +commit 6d83e3ac61dcdbcb7f04664309a9689fe01c5704 +Author: Graeme Russ +Date: Tue Feb 24 21:12:20 2009 +1100 + + Rename SC520 Configuration Options + + Options are now all uniformly CONFIG_SYS_SC520_