X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=Kconfig;h=45a06696a19f52083be2c8df5b228f747c2b750b;hb=d89ff2df33991b971b1388bc623d616e12b5e5fb;hp=817f4f08a02f0806a0d1d63c04e0e1e6829abf07;hpb=2313d48445e59f063ec9a3b4940fe8252737db76;p=u-boot

diff --git a/Kconfig b/Kconfig
index 817f4f08a0..45a06696a1 100644
--- a/Kconfig
+++ b/Kconfig
@@ -53,6 +53,24 @@ config CC_OPTIMIZE_FOR_SIZE
 
 	  This option is enabled by default for U-Boot.
 
+config DISTRO_DEFAULTS
+	bool "Select defaults suitable for booting general purpose Linux distributions"
+	default y if ARCH_SUNXI
+	default n
+	select CMD_BOOTZ if ARM && !ARM64
+	select CMD_BOOTI if ARM64
+	select CMD_DHCP
+	select CMD_EXT2
+	select CMD_EXT4
+	select CMD_FAT
+	select CMD_FS_GENERIC
+	select CMD_MII
+	select CMD_PING
+	select HUSH_PARSER
+	help
+	  Select this to enable various options and commands which are suitable
+	  for building u-boot for booting general purpose Linux distributions.
+
 config SYS_MALLOC_F
 	bool "Enable malloc() pool before relocation"
 	default y if DM
@@ -97,7 +115,24 @@ if EXPERT
 	  Warning:
 	  When disabling this, please check if malloc calls, maybe
 	  should be replaced by calloc - if one expects zeroed memory.
+
+config TOOLS_DEBUG
+	bool "Enable debug information for tools"
+	help
+	  Enable generation of debug information for tools such as mkimage.
+	  This can be used for debugging purposes. With debug information
+	  it is possible to set breakpoints on particular lines, single-step
+	  debug through the source code, etc.
+
 endif
+
+config PHYS_64BIT
+	bool "64bit physical address support"
+	help
+	  Say Y here to support 64bit physical memory address.
+	  This can be used not only for 64bit SoCs, but also for
+	  large physical address extention on 32bit SoCs.
+
 endmenu		# General setup
 
 menu "Boot images"
@@ -296,12 +331,49 @@ config SPL_LOAD_FIT
 	  particular it can handle selecting from multiple device tree
 	  and passing the correct one to U-Boot.
 
+config SPL_FIT_IMAGE_POST_PROCESS
+	bool "Enable post-processing of FIT artifacts after loading by the SPL"
+	depends on SPL_LOAD_FIT && TI_SECURE_DEVICE
+	help
+	  Allows doing any sort of manipulation to blobs after they got extracted
+	  from the U-Boot FIT image like stripping off headers or modifying the
+	  size of the blob, verification, authentication, decryption etc. in a
+	  platform or board specific way. In order to use this feature a platform
+	  or board-specific implementation of board_fit_image_post_process() must
+	  be provided. Also, anything done during this post-processing step would
+	  need to be comprehended in how the images were prepared before being
+	  injected into the FIT creation (i.e. the blobs would have been pre-
+	  processed before being added to the FIT image).
+
+config FIT_IMAGE_POST_PROCESS
+	bool "Enable post-processing of FIT artifacts after loading by U-Boot"
+	depends on FIT && TI_SECURE_DEVICE
+	help
+	  Allows doing any sort of manipulation to blobs after they got extracted
+	  from FIT images like stripping off headers or modifying the size of the
+	  blob, verification, authentication, decryption etc. in a platform or
+	  board specific way. In order to use this feature a platform or board-
+	  specific implementation of board_fit_image_post_process() must be
+	  provided. Also, anything done during this post-processing step would
+	  need to be comprehended in how the images were prepared before being
+	  injected into the FIT creation (i.e. the blobs would have been pre-
+	  processed before being added to the FIT image).
+
 config SYS_CLK_FREQ
 	depends on ARC || ARCH_SUNXI
 	int "CPU clock frequency"
 	help
 	  TODO: Move CONFIG_SYS_CLK_FREQ for all the architecture
 
+config ARCH_FIXUP_FDT
+	bool "Enable arch_fixup_fdt() call"
+	depends on ARM || MIPS
+	default y
+	help
+	  Enable FDT memory map syncup before OS boot. This feature can be
+	  used for booting OS with different memory setup where the part of
+	  the memory location should be used for different purpose.
+
 endmenu		# Boot images
 
 source "common/Kconfig"