X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=Kconfig;h=821b464db207b60813e326fcb3b014c98a2e98a3;hb=c0039753cb0f2dfc9d62b2744d62bfae374bf26b;hp=85faff78c8dd3df1da2860906ca0d663d5aa521a;hpb=ff7e9cfc338ecd6db5ed7d6ff8fb7a2889b0131c;p=u-boot

diff --git a/Kconfig b/Kconfig
index 85faff78c8..821b464db2 100644
--- a/Kconfig
+++ b/Kconfig
@@ -114,6 +114,16 @@ config SPL
 	help
 	  If you want to build SPL as well as the normal image, say Y.
 
+config SPL_SYS_MALLOC_SIMPLE
+	bool
+	depends on SPL
+	prompt "Only use malloc_simple functions in the spl"
+	help
+	  Say Y here to only use the *_simple malloc functions from
+	  malloc_simple.c, rather then using the versions from dlmalloc.c
+	  this will make the SPL binary smaller at the cost of more heap
+	  usage as the *_simple malloc functions do not re-use free-ed mem.
+
 config SPL_STACK_R
 	depends on SPL
 	bool "Enable SDRAM location for SPL stack"
@@ -132,6 +142,26 @@ config SPL_STACK_R_ADDR
 	  Specify the address in SDRAM for the SPL stack. This will be set up
 	  before board_init_r() is called.
 
+config SPL_STACK_R_MALLOC_SIMPLE_LEN
+	depends on SPL_STACK_R && SPL_SYS_MALLOC_SIMPLE
+	hex "Size of malloc_simple heap after switching to DRAM SPL stack"
+	default 0x100000
+	help
+	  Specify the amount of the stack to use as memory pool for
+	  malloc_simple after switching the stack to DRAM. This may be set
+	  to give board_init_r() a larger heap then the initial heap in
+	  SRAM which is limited to SYS_MALLOC_F_LEN bytes.
+
+config SPL_SEPARATE_BSS
+	depends on SPL
+	bool "BSS section is in a different memory region from text"
+	help
+	  Some platforms need a large BSS region in SPL and can provide this
+	  because RAM is already set up. In this case BSS can be moved to RAM.
+	  This option should then be enabled so that the correct device tree
+	  location is used. Normally we put the device tree at the end of BSS
+	  but with this option enabled, it goes at _image_binary_end.
+
 config TPL
 	bool
 	depends on SPL && SUPPORT_TPL
@@ -146,7 +176,7 @@ config FIT
 	  Flattened Image Tree.  FIT is formally a FDT, which can include
 	  images of various types (kernel, FDT blob, ramdisk, etc.)
 	  in a single blob.  To boot this new uImage structure,
-	  pass the the address of the blob to the "bootm" command.
+	  pass the address of the blob to the "bootm" command.
 
 config FIT_VERBOSE
 	bool "Display verbose messages on FIT boot"
@@ -178,7 +208,8 @@ config SYS_EXTRA_OPTIONS
 	  new boards should not use this option.
 
 config SYS_TEXT_BASE
-	depends on SPARC || ARC || X86
+	depends on SPARC || ARC || X86 || ARCH_UNIPHIER || ARCH_ZYNQMP
+	depends on !EFI_APP
 	hex "Text Base"
 	help
 	  TODO: Move CONFIG_SYS_TEXT_BASE for all the architecture