X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=Makefile;h=249a067f8c4f96b7b23d2771b136c734346b0363;hb=8f713fdfeb3bde6fe89dfb300f22cae9778e35eb;hp=5b9e3c8858c6f4db979aac00c3a23177b5826375;hpb=85ec0bcc1bc40a67368461fee0435d79305168b1;p=u-boot

diff --git a/Makefile b/Makefile
index 5b9e3c8858..249a067f8c 100644
--- a/Makefile
+++ b/Makefile
@@ -60,7 +60,11 @@ ifeq ($(ARCH),arm)
 CROSS_COMPILE = arm-linux-
 endif
 ifeq ($(ARCH),i386)
-#CROSS_COMPILE = i386-elf-
+ifeq ($(HOSTARCH),i386)
+CROSS_COMPILE =
+else
+CROSS_COMPILE = i386-linux-
+endif
 endif
 ifeq ($(ARCH),mips)
 CROSS_COMPILE = mips_4KC-
@@ -102,7 +106,7 @@ endif
 LIBS  =	board/$(BOARDDIR)/lib$(BOARD).a
 LIBS += cpu/$(CPU)/lib$(CPU).a
 LIBS += lib_$(ARCH)/lib$(ARCH).a
-LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a
+LIBS += fs/jffs2/libjffs2.a fs/fdos/libfdos.a fs/fat/libfat.a
 LIBS += net/libnet.a
 LIBS += disk/libdisk.a
 LIBS += rtc/librtc.a
@@ -112,13 +116,12 @@ LIBS += post/libpost.a post/cpu/libcpu.a
 LIBS += common/libcommon.a
 LIBS += lib_generic/libgeneric.a
 
+#########################################################################
 #########################################################################
 
-all:		u-boot.srec u-boot.bin System.map
+ALL = u-boot.srec u-boot.bin System.map
 
-install:	all
-		-cp u-boot.bin /tftpboot/u-boot.bin
-		-cp u-boot.bin /net/denx/tftpboot/u-boot.bin
+all:		$(ALL)
 
 u-boot.srec:	u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O srec $< $@
@@ -126,17 +129,28 @@ u-boot.srec:	u-boot
 u-boot.bin:	u-boot
 		$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
 
+u-boot.img:	u-boot.bin
+		./tools/mkimage -A $(ARCH) -T firmware -C none \
+		-a $(TEXT_BASE) -e 0 \
+		-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' include/version.h | \
+			sed -e 's/"[	 ]*$$/ for $(BOARD) board"/') \
+		-d $< $@
+
 u-boot.dis:	u-boot
 		$(OBJDUMP) -d $< > $@
 
 u-boot:		depend subdirs $(OBJS) $(LIBS) $(LDSCRIPT)
-		$(LD) $(LDFLAGS) $(OBJS) \
+		UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed  -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
+		$(LD) $(LDFLAGS) $$UNDEF_SYM $(OBJS) \
 			--start-group $(LIBS) --end-group \
 			-Map u-boot.map -o u-boot
 
 subdirs:
 		@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir || exit 1 ; done
 
+gdbtools:
+		$(MAKE) -C tools/gdb || exit 1
+
 depend dep:
 		@for dir in $(SUBDIRS) ; do $(MAKE) -C $$dir .depend ; done
 
@@ -168,6 +182,30 @@ unconfig:
 #========================================================================
 # PowerPC
 #========================================================================
+
+#########################################################################
+## MPC5xx Systems
+#########################################################################
+
+cmi_mpc5xx_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc5xx cmi
+
+#########################################################################
+## MPC5xxx Systems
+#########################################################################
+IceCube_5200_config	\
+IceCube_5100_config:		unconfig
+	@ >include/config.h
+	@[ -z "$(findstring _5200,$@)" ] || \
+		{ echo "#define CONFIG_MPC5200"		>>include/config.h ; \
+		  echo "... with MPC5200 processor" ; \
+		}
+	@[ -z "$(findstring _5100,$@)" ] || \
+		{ echo "#define CONFIG_MGT5100"		>>include/config.h ; \
+		  echo "... with MGT5100 processor" ; \
+		}
+	@./mkconfig -a IceCube ppc mpc5xxx icecube
+
 #########################################################################
 ## MPC8xx Systems
 #########################################################################
@@ -198,14 +236,23 @@ ETX094_config	:	unconfig
 
 FADS823_config	\
 FADS850SAR_config \
+MPC86xADS_config \
 FADS860T_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx fads
 
 FLAGADM_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx flagadm
 
+xtract_GEN860T = $(subst _SC,,$(subst _config,,$1))
+
+GEN860T_SC_config	\
 GEN860T_config: unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx gen860t
+	@ >include/config.h
+	@[ -z "$(findstring _SC,$@)" ] || \
+		{ echo "#define CONFIG_SC" >>include/config.h ; \
+		  echo "With reduced H/W feature set (SC)..." ; \
+		}
+	@./mkconfig -a $(call xtract_GEN860T,$@) ppc mpc8xx gen860t
 
 GENIETV_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx genietv
@@ -282,8 +329,20 @@ MHPC_config:		unconfig
 MVS1_config :		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx mvs1
 
+xtract_NETVIA = $(subst _V2,,$(subst _config,,$1))
+
+NETVIA_V2_config \
 NETVIA_config:		unconfig
-	@./mkconfig $(@:_config=) ppc mpc8xx netvia
+	@ >include/config.h
+	@[ -z "$(findstring NETVIA_config,$@)" ] || \
+		 { echo "#define CONFIG_NETVIA_VERSION 1" >>include/config.h ; \
+		  echo "... Version 1" ; \
+		 }
+	@[ -z "$(findstring NETVIA_V2_config,$@)" ] || \
+		 { echo "#define CONFIG_NETVIA_VERSION 2" >>include/config.h ; \
+		  echo "... Version 2" ; \
+		 }
+	@./mkconfig -a $(call xtract_NETVIA,$@) ppc mpc8xx netvia
 
 NX823_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx nx823
@@ -294,12 +353,18 @@ pcu_e_config:		unconfig
 R360MPI_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx r360mpi
 
+RBC823_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx rbc823
+
 RPXClassic_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RPXClassic
 
 RPXlite_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RPXlite
 
+rmu_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8xx rmu
+
 RRvision_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx RRvision
 
@@ -326,13 +391,14 @@ TOP860_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8xx top860 emk
 
 # Play some tricks for configuration selection
-# All boards can come with 50 MHz (default), 66MHz or 80MHz clock,
+# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
 # but only 855 and 860 boards may come with FEC
 # and 823 boards may have LCD support
-xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _LCD,,$(subst _FEC,,$(subst _config,,$1)))))
+xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
 
 FPS850L_config		\
 FPS860L_config		\
+NSCU_config		\
 TQM823L_config		\
 TQM823L_66MHz_config	\
 TQM823L_80MHz_config	\
@@ -345,20 +411,23 @@ TQM850L_80MHz_config	\
 TQM855L_config		\
 TQM855L_66MHz_config	\
 TQM855L_80MHz_config	\
-TQM855L_FEC_config	\
-TQM855L_FEC_66MHz_config \
-TQM855L_FEC_80MHz_config \
 TQM860L_config		\
 TQM860L_66MHz_config	\
 TQM860L_80MHz_config	\
-TQM860L_FEC_config	\
-TQM860L_FEC_66MHz_config	\
-TQM860L_FEC_80MHz_config:	unconfig
+TQM862L_config		\
+TQM862L_66MHz_config	\
+TQM862L_80MHz_config	\
+TQM855M_config		\
+TQM855M_66MHz_config	\
+TQM855M_80MHz_config	\
+TQM860M_config		\
+TQM860M_66MHz_config	\
+TQM860M_80MHz_config	\
+TQM862M_config		\
+TQM862M_66MHz_config	\
+TQM862M_80MHz_config	\
+TQM862M_100MHz_config:	unconfig
 	@ >include/config.h
-	@[ -z "$(findstring _FEC,$@)" ] || \
-		{ echo "#define CONFIG_FEC_ENET"	>>include/config.h ; \
-		  echo "... with FEC support" ; \
-		}
 	@[ -z "$(findstring _66MHz,$@)" ] || \
 		{ echo "#define CONFIG_66MHz"		>>include/config.h ; \
 		  echo "... with 66MHz system clock" ; \
@@ -367,6 +436,10 @@ TQM860L_FEC_80MHz_config:	unconfig
 		{ echo "#define CONFIG_80MHz"		>>include/config.h ; \
 		  echo "... with 80MHz system clock" ; \
 		}
+	@[ -z "$(findstring _100MHz,$@)" ] || \
+		{ echo "#define CONFIG_100MHz"		>>include/config.h ; \
+		  echo "... with 100MHz system clock" ; \
+		}
 	@[ -z "$(findstring _LCD,$@)" ] || \
 		{ echo "#define CONFIG_LCD"		>>include/config.h ; \
 		  echo "#define CONFIG_NEC_NL6648BC20"	>>include/config.h ; \
@@ -394,11 +467,18 @@ ADCIOP_config:	unconfig
 AR405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ar405 esd
 
+ASH405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
+
+BUBINGA405EP_config:unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
 
-CPCI405_config		\
-CPCI4052_config:	unconfig
+CPCI405_config	\
+CPCI4052_config	\
+CPCI405AB_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx cpci405 esd
 	@echo "BOARD_REVISION = $(@:_config=)"	>>include/config.mk
 
@@ -423,9 +503,17 @@ EBONY_config:unconfig
 ERIC_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
 
+EXBITGEN_config:unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx exbitgen
+
 MIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx mip405 mpl
 
+MIP405T_config:unconfig
+	@echo "#define CONFIG_MIP405T" >include/config.h
+	@echo "Enable subset config for MIP405T"
+	@./mkconfig -a MIP405 ppc ppc4xx mip405 mpl
+
 ML2_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml2
 
@@ -439,6 +527,9 @@ PCI405_config:	unconfig
 PIP405_config:unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx pip405 mpl
 
+PMC405_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd
+
 W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
@@ -451,6 +542,9 @@ WALNUT405_config:unconfig
 #########################################################################
 xtract_82xx = $(subst _ROMBOOT,,$(subst _L2,,$(subst _266MHz,,$(subst _300MHz,,$(subst _config,,$1)))))
 
+A3000_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x a3000
+
 BMW_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x bmw
 
@@ -488,6 +582,9 @@ Sandpoint8240_config: unconfig
 Sandpoint8245_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x sandpoint
 
+SL8245_config: unconfig
+	@./mkconfig $(@:_config=) ppc mpc824x sl8245
+
 utx8245_config: unconfig
 	@./mkconfig $(@:_config=) ppc mpc824x utx8245
 
@@ -574,28 +671,52 @@ sbc8260_config:	unconfig
 SCM_config:		unconfig
 	@./mkconfig $(@:_config=) ppc mpc8260 SCM siemens
 
-TQM8260_config	\
-TQM8260_L2_config	\
-TQM8260_266MHz_config	\
-TQM8260_L2_266MHz_config \
-TQM8260_300MHz_config:	unconfig
-	@ >include/config.h
-	@if [ "$(findstring _L2_,$@)" ] ; then \
+TQM8255_AA_config \
+TQM8260_AA_config \
+TQM8260_AB_config \
+TQM8260_AC_config \
+TQM8260_AD_config \
+TQM8260_AE_config \
+TQM8260_AF_config \
+TQM8260_AG_config \
+TQM8260_AH_config \
+TQM8265_AA_config:  unconfig
+	@case "$@" in \
+	TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no;  BMODE=8260;;  \
+	TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no;  BMODE=8260;; \
+	TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
+	TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;;  \
+	TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no;  BMODE=8260;; \
+	TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no;  BMODE=8260;; \
+	TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;;  \
+	TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no;  BMODE=60x;;  \
+	esac; \
+	>include/config.h ; \
+	if [ "$${CTYPE}" != "MPC8260" ] ; then \
+		echo "#define CONFIG_$${CTYPE}"	>>include/config.h ; \
+	fi; \
+	echo "#define CONFIG_$${CFREQ}MHz"	>>include/config.h ; \
+	echo "... with $${CFREQ}MHz system clock" ; \
+	if [ "$${CACHE}" == "yes" ] ; then \
 		echo "#define CONFIG_L2_CACHE"	>>include/config.h ; \
-		echo "... with L2 Cache support (60x Bus Mode)" ; \
+		echo "... with L2 Cache support" ; \
 	else \
 		echo "#undef CONFIG_L2_CACHE"	>>include/config.h ; \
 		echo "... without L2 Cache support" ; \
+	fi; \
+	if [ "$${BMODE}" == "60x" ] ; then \
+		echo "#define CONFIG_BUSMODE_60x" >>include/config.h ; \
+		echo "... with 60x Bus Mode" ; \
+	else \
+		echo "#undef CONFIG_BUSMODE_60x"  >>include/config.h ; \
+		echo "... without 60x Bus Mode" ; \
 	fi
-	@[ -z "$(findstring _266MHz,$@)" ] || \
-		{ echo "#define CONFIG_266MHz"	>>include/config.h ; \
-		  echo "... with 266MHz system clock" ; \
-		}
-	@[ -z "$(findstring _300MHz,$@)" ] || \
-		{ echo "#define CONFIG_300MHz"	>>include/config.h ; \
-		  echo "... with 300MHz system clock" ; \
-		}
-	@./mkconfig -a $(call xtract_82xx,$@) ppc mpc8260 tqm8260
+	@./mkconfig -a TQM8260 ppc mpc8260 tqm8260
+
+atc_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc8260 atc
 
 #########################################################################
 ## 74xx/7xx Systems
@@ -641,11 +762,14 @@ shannon_config	:	unconfig
 	@./mkconfig $(@:_config=) arm sa1100 shannon
 
 #########################################################################
-## ARM920T Systems
+## ARM92xT Systems
 #########################################################################
 
 xtract_trab = $(subst _big_flash,,$(subst _config,,$1))
 
+omap1510inn_config :	unconfig
+	@./mkconfig $(@:_config=) arm arm925t omap1510inn
+
 smdk2400_config	:	unconfig
 	@./mkconfig $(@:_config=) arm arm920t smdk2400
 
@@ -679,16 +803,22 @@ ep7312_config	:	unconfig
 #########################################################################
 
 cradle_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale cradle
+	@./mkconfig $(@:_config=) arm pxa cradle
 
 csb226_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale csb226
+	@./mkconfig $(@:_config=) arm pxa csb226
 
 innokom_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale innokom
+	@./mkconfig $(@:_config=) arm pxa innokom
 
 lubbock_config	:	unconfig
-	@./mkconfig $(@:_config=) arm xscale lubbock
+	@./mkconfig $(@:_config=) arm pxa lubbock
+
+logodl_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa logodl
+
+wepep250_config	:	unconfig
+	@./mkconfig $(@:_config=) arm pxa wepep250
 
 #========================================================================
 # i386
@@ -699,6 +829,12 @@ lubbock_config	:	unconfig
 sc520_cdp_config	:	unconfig
 	@./mkconfig $(@:_config=) i386 i386 sc520_cdp
 
+sc520_spunk_config	:	unconfig
+	@./mkconfig $(@:_config=) i386 i386 sc520_spunk
+
+sc520_spunk_rel_config	:	unconfig
+	@./mkconfig $(@:_config=) i386 i386 sc520_spunk
+
 #========================================================================
 # MIPS
 #========================================================================
@@ -709,7 +845,11 @@ sc520_cdp_config	:	unconfig
 incaip_config :		unconfig
 	@./mkconfig $(@:_config=) mips mips incaip
 
+purple_config :		unconfig
+	@./mkconfig $(@:_config=) mips mips purple
 
+#########################################################################
+#########################################################################
 
 clean:
 	find . -type f \
@@ -717,11 +857,14 @@ clean:
 		-o -name '*.o'  -o -name '*.a'  \) -print \
 		| xargs rm -f
 	rm -f examples/hello_world examples/timer \
-	      examples/eepro100_eeprom examples/sched
+	      examples/eepro100_eeprom examples/sched \
+	      examples/mem_to_mem_idma2intr examples/82559_eeprom
+
 	rm -f tools/img2srec tools/mkimage tools/envcrc tools/gen_eth_addr
 	rm -f tools/easylogo/easylogo tools/bmp_logo
 	rm -f tools/gdb/astest tools/gdb/gdbcont tools/gdb/gdbsend
 	rm -f tools/env/fw_printenv tools/env/fw_setenv
+	rm -f board/cray/L1/bootscript.c board/cray/L1/bootscript.image
 
 clobber:	clean
 	find . -type f \
@@ -730,10 +873,10 @@ clobber:	clean
 		| xargs rm -f
 	rm -f $(OBJS) *.bak tags TAGS
 	rm -fr *.*~
-	rm -f u-boot u-boot.bin u-boot.elf u-boot.srec u-boot.map System.map
+	rm -f u-boot u-boot.map $(ALL)
 	rm -f tools/crc32.c tools/environment.c tools/env/crc32.c
-	rm -f cpu/mpc824x/bedbug_603e.c
-	rm -f include/asm/arch include/asm
+	rm -f tools/inca-swap-bytes cpu/mpc824x/bedbug_603e.c
+	rm -f include/asm/proc include/asm/arch include/asm
 
 mrproper \
 distclean:	clobber unconfig