X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=Makefile;h=25a62541d1be50da422866b14f2975a2bb356bee;hb=9af9c6bdc16da53772c56b1a79c2c91701fe94e6;hp=2a06440249577b5fefae4a6f8dcefa2b010b2f9b;hpb=59869ca72df8bc4e4ffa9dd17cb6673bbe010272;p=u-boot diff --git a/Makefile b/Makefile index 2a06440249..25a62541d1 100644 --- a/Makefile +++ b/Makefile @@ -140,8 +140,8 @@ endif # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) SUBDIRS = tools \ - examples \ - api_examples + examples/standalone \ + examples/api .PHONY : $(SUBDIRS) @@ -151,50 +151,10 @@ ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) include $(obj)include/config.mk export ARCH CPU BOARD VENDOR SOC -ifndef CROSS_COMPILE +# set default to nothing for native builds ifeq ($(HOSTARCH),$(ARCH)) -CROSS_COMPILE = -else -ifeq ($(ARCH),ppc) -CROSS_COMPILE = ppc_8xx- -endif -ifeq ($(ARCH),arm) -CROSS_COMPILE = arm-linux- -endif -ifeq ($(ARCH),i386) -CROSS_COMPILE = i386-linux- -endif -ifeq ($(ARCH),mips) -CROSS_COMPILE = mips_4KC- -endif -ifeq ($(ARCH),nios) -CROSS_COMPILE = nios-elf- -endif -ifeq ($(ARCH),nios2) -CROSS_COMPILE = nios2-elf- -endif -ifeq ($(ARCH),m68k) -CROSS_COMPILE = m68k-elf- -endif -ifeq ($(ARCH),microblaze) -CROSS_COMPILE = mb- -endif -ifeq ($(ARCH),blackfin) -CROSS_COMPILE = bfin-uclinux- +CROSS_COMPILE ?= endif -ifeq ($(ARCH),avr32) -CROSS_COMPILE = avr32-linux- -endif -ifeq ($(ARCH),sh) -CROSS_COMPILE = sh4-linux- -endif -ifeq ($(ARCH),sparc) -CROSS_COMPILE = sparc-elf- -endif # sparc -endif # HOSTARCH,ARCH -endif # CROSS_COMPILE - -export CROSS_COMPILE # load other configuration include $(TOPDIR)/config.mk @@ -246,7 +206,6 @@ LIBS += drivers/misc/libmisc.a LIBS += drivers/mmc/libmmc.a LIBS += drivers/mtd/libmtd.a LIBS += drivers/mtd/nand/libnand.a -LIBS += drivers/mtd/nand_legacy/libnand_legacy.a LIBS += drivers/mtd/onenand/libonenand.a LIBS += drivers/mtd/ubi/libubi.a LIBS += drivers/mtd/spi/libspi_flash.a @@ -352,7 +311,7 @@ GEN_UBOOT = \ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(GEN_UBOOT) ifeq ($(CONFIG_KALLSYMS),y) - smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\0"}'` ; \ + smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o $(GEN_UBOOT) $(obj)common/system_map.o endif @@ -428,7 +387,6 @@ TAG_SUBDIRS += drivers/misc TAG_SUBDIRS += drivers/mmc TAG_SUBDIRS += drivers/mtd TAG_SUBDIRS += drivers/mtd/nand -TAG_SUBDIRS += drivers/mtd/nand_legacy TAG_SUBDIRS += drivers/mtd/onenand TAG_SUBDIRS += drivers/mtd/spi TAG_SUBDIRS += drivers/net @@ -483,6 +441,7 @@ $(obj)include/autoconf.mk: $(obj)include/config.h mv $@.tmp $@ sinclude $(obj)include/autoconf.mk.dep +sinclude $(obj)include/autoconf.mk ######################################################################### else # !config.mk @@ -695,6 +654,16 @@ MVBC_P_config: unconfig o2dnt_config: unconfig @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt +pcm030_config \ +pcm030_LOWBOOT_config: unconfig + @mkdir -p $(obj)include $(obj)board/phytec/pcm030 + @ >$(obj)include/config.h + @[ -z "$(findstring LOWBOOT_,$@)" ] || \ + { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ + echo "... with LOWBOOT configuration" ; \ + } + @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec + pf5200_config: unconfig @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd @@ -2743,12 +2712,22 @@ at91sam9xeek_config : unconfig at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ -at91sam9261ek_config : unconfig - @mkdir -p $(obj)include +at91sam9261ek_config \ +at91sam9g10ek_nandflash_config \ +at91sam9g10ek_dataflash_cs0_config \ +at91sam9g10ek_dataflash_cs3_config \ +at91sam9g10ek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9g10,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9G10 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ + fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ - elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ else \ @@ -2800,6 +2779,31 @@ meesc_config : unconfig pm9261_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 +at91sam9m10g45ek_nandflash_config \ +at91sam9m10g45ek_dataflash_config \ +at91sam9m10g45ek_dataflash_cs0_config \ +at91sam9m10g45ek_config \ +at91sam9g45ekes_nandflash_config \ +at91sam9g45ekes_dataflash_config \ +at91sam9g45ekes_dataflash_cs0_config \ +at91sam9g45ekes_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9m10,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9M10G45 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ + fi; + + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + else \ + echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 + pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 @@ -3529,18 +3533,14 @@ sh7763rdp_config : unconfig xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) sh7785lcr_32bit_config \ sh7785lcr_config : unconfig - @ >include/config.h - @echo "#define CONFIG_SH7785LCR 1" >> include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/renesas/sh7785lcr + @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h @if [ "$(findstring 32bit, $@)" ] ; then \ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ - cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \ - $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ - else \ - cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \ - $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ fi @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas @@ -3549,6 +3549,11 @@ ap325rxa_config : unconfig @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas +espt_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 espt + #======================================================================== # SPARC #======================================================================== @@ -3587,11 +3592,16 @@ grsim_leon2_config : unconfig ######################################################################### clean: - @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \ - $(obj)examples/hello_world $(obj)examples/interrupt \ - $(obj)examples/mem_to_mem_idma2intr \ - $(obj)examples/sched $(obj)examples/smc91111_eeprom \ - $(obj)examples/test_burst $(obj)examples/timer + @rm -f $(obj)examples/standalone/82559_eeprom \ + $(obj)examples/standalone/eepro100_eeprom \ + $(obj)examples/standalone/hello_world \ + $(obj)examples/standalone/interrupt \ + $(obj)examples/standalone/mem_to_mem_idma2intr \ + $(obj)examples/standalone/sched \ + $(obj)examples/standalone/smc91111_eeprom \ + $(obj)examples/standalone/test_burst \ + $(obj)examples/standalone/timer + @rm -f $(obj)examples/api/demo{,.bin} @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ $(obj)tools/env/{fw_printenv,fw_setenv} \ $(obj)tools/envcrc \ @@ -3608,7 +3618,7 @@ clean: @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} - @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE) + @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) @find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ @@ -3627,7 +3637,6 @@ clobber: clean @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f - @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f ifeq ($(OBJTREE),$(SRCTREE)) mrproper \