X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=Makefile;h=a7ffe2501c923c1c66d71f3bdfb05f23798f8d47;hb=b201171f2b4d509f3ad510b214bee70ff902e3d6;hp=345ff6f31b4d8ddf2139d9cf18f00215199a7ea8;hpb=8b219cf07c186cc9d97354cf4b14f24a53d193c5;p=u-boot diff --git a/Makefile b/Makefile index 345ff6f31b..a7ffe2501c 100644 --- a/Makefile +++ b/Makefile @@ -140,8 +140,8 @@ endif # The "tools" are needed early, so put this first # Don't include stuff already done in $(LIBS) SUBDIRS = tools \ - examples \ - api_examples + examples/standalone \ + examples/api .PHONY : $(SUBDIRS) @@ -151,50 +151,10 @@ ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) include $(obj)include/config.mk export ARCH CPU BOARD VENDOR SOC -ifndef CROSS_COMPILE +# set default to nothing for native builds ifeq ($(HOSTARCH),$(ARCH)) -CROSS_COMPILE = -else -ifeq ($(ARCH),ppc) -CROSS_COMPILE = ppc_8xx- -endif -ifeq ($(ARCH),arm) -CROSS_COMPILE = arm-linux- -endif -ifeq ($(ARCH),i386) -CROSS_COMPILE = i386-linux- -endif -ifeq ($(ARCH),mips) -CROSS_COMPILE = mips_4KC- -endif -ifeq ($(ARCH),nios) -CROSS_COMPILE = nios-elf- -endif -ifeq ($(ARCH),nios2) -CROSS_COMPILE = nios2-elf- -endif -ifeq ($(ARCH),m68k) -CROSS_COMPILE = m68k-elf- +CROSS_COMPILE ?= endif -ifeq ($(ARCH),microblaze) -CROSS_COMPILE = mb- -endif -ifeq ($(ARCH),blackfin) -CROSS_COMPILE = bfin-uclinux- -endif -ifeq ($(ARCH),avr32) -CROSS_COMPILE = avr32-linux- -endif -ifeq ($(ARCH),sh) -CROSS_COMPILE = sh4-linux- -endif -ifeq ($(ARCH),sparc) -CROSS_COMPILE = sparc-elf- -endif # sparc -endif # HOSTARCH,ARCH -endif # CROSS_COMPILE - -export CROSS_COMPILE # load other configuration include $(TOPDIR)/config.mk @@ -246,7 +206,6 @@ LIBS += drivers/misc/libmisc.a LIBS += drivers/mmc/libmmc.a LIBS += drivers/mtd/libmtd.a LIBS += drivers/mtd/nand/libnand.a -LIBS += drivers/mtd/nand_legacy/libnand_legacy.a LIBS += drivers/mtd/onenand/libonenand.a LIBS += drivers/mtd/ubi/libubi.a LIBS += drivers/mtd/spi/libspi_flash.a @@ -306,10 +265,8 @@ __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) ######################################################################### ######################################################################### +# Always append ALL so that arch config.mk's can add custom ones ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) -ifeq ($(ARCH),blackfin) -ALL += $(obj)u-boot.ldr -endif all: $(ALL) @@ -354,7 +311,7 @@ GEN_UBOOT = \ $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(GEN_UBOOT) ifeq ($(CONFIG_KALLSYMS),y) - smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\0"}'` ; \ + smap=`$(call SYSTEM_MAP,u-boot) | awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" -c common/system_map.c -o $(obj)common/system_map.o $(GEN_UBOOT) $(obj)common/system_map.o endif @@ -430,7 +387,6 @@ TAG_SUBDIRS += drivers/misc TAG_SUBDIRS += drivers/mmc TAG_SUBDIRS += drivers/mtd TAG_SUBDIRS += drivers/mtd/nand -TAG_SUBDIRS += drivers/mtd/nand_legacy TAG_SUBDIRS += drivers/mtd/onenand TAG_SUBDIRS += drivers/mtd/spi TAG_SUBDIRS += drivers/net @@ -485,6 +441,7 @@ $(obj)include/autoconf.mk: $(obj)include/config.h mv $@.tmp $@ sinclude $(obj)include/autoconf.mk.dep +sinclude $(obj)include/autoconf.mk ######################################################################### else # !config.mk @@ -697,6 +654,16 @@ MVBC_P_config: unconfig o2dnt_config: unconfig @$(MKCONFIG) o2dnt ppc mpc5xxx o2dnt +pcm030_config \ +pcm030_LOWBOOT_config: unconfig + @mkdir -p $(obj)include $(obj)board/phytec/pcm030 + @ >$(obj)include/config.h + @[ -z "$(findstring LOWBOOT_,$@)" ] || \ + { echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp ; \ + echo "... with LOWBOOT configuration" ; \ + } + @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec + pf5200_config: unconfig @$(MKCONFIG) pf5200 ppc mpc5xxx pf5200 esd @@ -2582,6 +2549,9 @@ MPC8641HPCN_config: unconfig sbc8641d_config: unconfig @$(MKCONFIG) $(@:_config=) ppc mpc86xx sbc8641d +XPEDITE5170_config: unconfig + @$(MKCONFIG) $(@:_config=) ppc mpc86xx xpedite5170 xes + ######################################################################### ## 74xx/7xx Systems ######################################################################### @@ -2742,12 +2712,22 @@ at91sam9xeek_config : unconfig at91sam9261ek_nandflash_config \ at91sam9261ek_dataflash_cs0_config \ at91sam9261ek_dataflash_cs3_config \ -at91sam9261ek_config : unconfig - @mkdir -p $(obj)include +at91sam9261ek_config \ +at91sam9g10ek_nandflash_config \ +at91sam9g10ek_dataflash_cs0_config \ +at91sam9g10ek_dataflash_cs3_config \ +at91sam9g10ek_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9g10,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9G10 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ + fi; @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ - elif [ "$(findstring dataflash_cs3,$@)" ] ; then \ + elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS3" ; \ else \ @@ -2756,6 +2736,8 @@ at91sam9261ek_config : unconfig fi; @$(MKCONFIG) -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 +at91sam9263ek_norflash_config \ +at91sam9263ek_norflash_boot_config \ at91sam9263ek_nandflash_config \ at91sam9263ek_dataflash_config \ at91sam9263ek_dataflash_cs0_config \ @@ -2764,10 +2746,17 @@ at91sam9263ek_config : unconfig @if [ "$(findstring _nandflash,$@)" ] ; then \ echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in NAND FLASH" ; \ + elif [ "$(findstring norflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NOR FLASH" ; \ else \ echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ fi; + @if [ "$(findstring norflash_boot,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... and boot from NOR FLASH" ; \ + fi; @$(MKCONFIG) -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 at91sam9rlek_nandflash_config \ @@ -2784,6 +2773,37 @@ at91sam9rlek_config : unconfig fi; @$(MKCONFIG) -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 +meesc_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs meesc esd at91 + +pm9261_config : unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9261 ronetix at91 + +at91sam9m10g45ek_nandflash_config \ +at91sam9m10g45ek_dataflash_config \ +at91sam9m10g45ek_dataflash_cs0_config \ +at91sam9m10g45ek_config \ +at91sam9g45ekes_nandflash_config \ +at91sam9g45ekes_dataflash_config \ +at91sam9g45ekes_dataflash_cs0_config \ +at91sam9g45ekes_config : unconfig + @mkdir -p $(obj)include + @if [ "$(findstring 9m10,$@)" ] ; then \ + echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ + $(XECHO) "... 9M10G45 Variant" ; \ + else \ + echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ + fi; + + @if [ "$(findstring _nandflash,$@)" ] ; then \ + echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in NAND FLASH" ; \ + else \ + echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ + $(XECHO) "... with environment variable in SPI DATAFLASH CS0" ; \ + fi; + @$(MKCONFIG) -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 + pm9263_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs pm9263 ronetix at91 @@ -2799,7 +2819,7 @@ ap720t_config \ ap920t_config \ ap926ejs_config \ ap946es_config: unconfig - @board/armltd/integratorap/split_by_variant.sh $@ + @board/armltd/integrator/split_by_variant.sh ap $@ integratorcp_config \ cp_config \ @@ -2811,7 +2831,7 @@ cp966_config \ cp922_config \ cp922_XA10_config \ cp1026_config: unconfig - @board/armltd/integratorcp/split_by_variant.sh $@ + @board/armltd/integrator/split_by_variant.sh cp $@ davinci_dvevm_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm926ejs dvevm davinci davinci @@ -2832,6 +2852,9 @@ lpd7a400_config \ lpd7a404_config: unconfig @$(MKCONFIG) $(@:_config=) arm lh7a40x lpd7a40x +mv88f6281gtw_ge_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + mx1ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t mx1ads NULL imx @@ -2841,17 +2864,17 @@ mx1fs2_config : unconfig netstar_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm925t netstar -nmdk8815_config \ -nmdk8815_onenand_config: unconfig +nhk8815_config \ +nhk8815_onenand_config: unconfig @mkdir -p $(obj)include @ > $(obj)include/config.h @if [ "$(findstring _onenand, $@)" ] ; then \ echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ - $(XECHO) "... configured for OneNand Flash"; \ + $(XECHO) "... configured to boot from OneNand Flash"; \ else \ - $(XECHO) "... configured for Nand Flash"; \ + $(XECHO) "... configured to boot from Nand Flash"; \ fi - @$(MKCONFIG) -a nmdk8815 arm arm926ejs nmdk8815 st nomadik + @$(MKCONFIG) -a nhk8815 arm arm926ejs nhk8815 st nomadik omap1510inn_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm925t omap1510inn @@ -2897,12 +2920,18 @@ omap730p2_cs3boot_config : unconfig fi; @$(MKCONFIG) -a $(call xtract_omap730p2,$@) arm arm926ejs omap730p2 NULL omap +rd6281a_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + sbc2410x_config: unconfig @$(MKCONFIG) $(@:_config=) arm arm920t sbc2410x NULL s3c24x0 scb9328_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t scb9328 NULL imx +sheevaplug_config: unconfig + @$(MKCONFIG) $(@:_config=) arm arm926ejs $(@:_config=) Marvell kirkwood + smdk2400_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm920t smdk2400 samsung s3c24x0 @@ -3082,8 +3111,13 @@ scpu_config: unconfig pxa255_idp_config: unconfig @$(MKCONFIG) $(@:_config=) arm pxa pxa255_idp +polaris_config \ trizepsiv_config : unconfig - @$(MKCONFIG) $(@:_config=) arm pxa trizepsiv + @mkdir -p $(obj)include + @if [ "$(findstring polaris,$@)" ] ; then \ + echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ + fi; + @$(MKCONFIG) -a trizepsiv arm pxa trizepsiv wepep250_config : unconfig @$(MKCONFIG) $(@:_config=) arm pxa wepep250 @@ -3125,13 +3159,23 @@ imx31_phycore_config : unconfig mx31ads_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 mx31ads freescale mx31 +mx31pdk_config \ +mx31pdk_nand_config : unconfig + @mkdir -p $(obj)include + @if [ -n "$(findstring _nand_,$@)" ]; then \ + echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ + else \ + echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ + echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ + fi + @$(MKCONFIG) -a mx31pdk arm arm1136 mx31pdk freescale mx31 + omap2420h4_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 omap2420h4 NULL omap24xx qong_config : unconfig @$(MKCONFIG) $(@:_config=) arm arm1136 qong davedenx mx31 - ######################################################################### ## ARM1176 Systems ######################################################################### @@ -3388,10 +3432,16 @@ suzaku_config: unconfig # Analog Devices boards BFIN_BOARDS = bf518f-ezbrd bf526-ezbrd bf527-ezkit bf533-ezkit bf533-stamp \ - bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit + bf537-pnav bf537-stamp bf538f-ezkit bf548-ezkit bf561-ezkit # Bluetechnix tinyboards -BFIN_BOARDS += cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537 +BFIN_BOARDS += cm-bf527 cm-bf533 cm-bf537e cm-bf548 cm-bf561 tcm-bf537 + +# Misc third party boards +BFIN_BOARDS += bf537-minotaur bf537-srv1 blackstamp + +# I-SYST Micromodule +BFIN_BOARDS += ibf-dsp561 $(BFIN_BOARDS:%=%_config) : unconfig @$(MKCONFIG) $(@:_config=) blackfin blackfin $(@:_config=) @@ -3491,18 +3541,14 @@ sh7763rdp_config : unconfig xtract_sh7785lcr = $(subst _32bit,,$(subst _config,,$1)) sh7785lcr_32bit_config \ sh7785lcr_config : unconfig - @ >include/config.h - @echo "#define CONFIG_SH7785LCR 1" >> include/config.h + @mkdir -p $(obj)include + @mkdir -p $(obj)board/renesas/sh7785lcr + @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h @if [ "$(findstring 32bit, $@)" ] ; then \ echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ - cp $(obj)board/renesas/sh7785lcr/u-boot_32bit \ - $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ echo "TEXT_BASE = 0x8ff80000" > \ $(obj)board/renesas/sh7785lcr/config.tmp ; \ $(XECHO) " ... enable 32-Bit Address Extended Mode" ; \ - else \ - cp $(obj)board/renesas/sh7785lcr/u-boot_29bit \ - $(obj)board/renesas/sh7785lcr/u-boot.lds ; \ fi @$(MKCONFIG) -a $(call xtract_sh7785lcr,$@) sh sh4 sh7785lcr renesas @@ -3511,6 +3557,11 @@ ap325rxa_config : unconfig @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h @$(MKCONFIG) -a $(@:_config=) sh sh4 ap325rxa renesas +espt_config : unconfig + @mkdir -p $(obj)include + @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h + @$(MKCONFIG) -a $(@:_config=) sh sh4 espt + #======================================================================== # SPARC #======================================================================== @@ -3549,11 +3600,16 @@ grsim_leon2_config : unconfig ######################################################################### clean: - @rm -f $(obj)examples/82559_eeprom $(obj)examples/eepro100_eeprom \ - $(obj)examples/hello_world $(obj)examples/interrupt \ - $(obj)examples/mem_to_mem_idma2intr \ - $(obj)examples/sched $(obj)examples/smc91111_eeprom \ - $(obj)examples/test_burst $(obj)examples/timer + @rm -f $(obj)examples/standalone/82559_eeprom \ + $(obj)examples/standalone/eepro100_eeprom \ + $(obj)examples/standalone/hello_world \ + $(obj)examples/standalone/interrupt \ + $(obj)examples/standalone/mem_to_mem_idma2intr \ + $(obj)examples/standalone/sched \ + $(obj)examples/standalone/smc91111_eeprom \ + $(obj)examples/standalone/test_burst \ + $(obj)examples/standalone/timer + @rm -f $(obj)examples/api/demo{,.bin} @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ $(obj)tools/env/{fw_printenv,fw_setenv} \ $(obj)tools/envcrc \ @@ -3565,14 +3621,12 @@ clean: $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ - $(obj)board/bf5{18f,26,27,33,38f,48,61}-ez{brd,kit}/u-boot.lds \ - $(obj)board/bf5{33,37}-stamp/u-boot.lds \ - $(obj)board/{,t}cm-bf5{33,37e,48,61}/u-boot.lds \ + $(obj)lib_blackfin/u-boot.lds \ $(obj)cpu/blackfin/bootrom-asm-offsets.[chs] @rm -f $(obj)include/bmp_logo.h @rm -f $(obj)nand_spl/{u-boot-spl,u-boot-spl.map,System.map} @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl-2k.bin,ipl-4k.bin,ipl.map} - @rm -f $(obj)api_examples/demo $(TIMESTAMP_FILE) $(VERSION_FILE) + @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) @find $(OBJTREE) -type f \ \( -name 'core' -o -name '*.bak' -o -name '*~' \ -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ @@ -3591,7 +3645,6 @@ clobber: clean @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f - @[ ! -d $(obj)api_examples ] || find $(obj)api_examples -name "*" -type l -print | xargs rm -f ifeq ($(OBJTREE),$(SRCTREE)) mrproper \