X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=07f1d11e5feb2565df5422f3ccf940f1174a747d;hb=b2776d3ff54bb769d7f44e925f73c9984b10ef80;hp=58e582d022175c43a7249c26438fd70904db8028;hpb=87a5d601031652293ec4b729fdb7ee01bbd940a8;p=u-boot

diff --git a/README b/README
index 58e582d022..07f1d11e5f 100644
--- a/README
+++ b/README
@@ -876,7 +876,7 @@ The following options need to be configured:
 
 		CONFIG_RTC_MPC8xx	- use internal RTC of MPC8xx
 		CONFIG_RTC_PCF8563	- use Philips PCF8563 RTC
-		CONFIG_RTC_MC13783	- use MC13783 RTC
+		CONFIG_RTC_MC13XXX	- use MC13783 or MC13892 RTC
 		CONFIG_RTC_MC146818	- use MC146818 RTC
 		CONFIG_RTC_DS1307	- use Maxim, Inc. DS1307 RTC
 		CONFIG_RTC_DS1337	- use Maxim, Inc. DS1337 RTC
@@ -957,7 +957,20 @@ The following options need to be configured:
 
 - NETWORK Support (PCI):
 		CONFIG_E1000
-		Support for Intel 8254x gigabit chips.
+		Support for Intel 8254x/8257x gigabit chips.
+
+		CONFIG_E1000_SPI
+		Utility code for direct access to the SPI bus on Intel 8257x.
+		This does not do anything useful unless you set at least one
+		of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC.
+
+		CONFIG_E1000_SPI_GENERIC
+		Allow generic access to the SPI bus on the Intel 8257x, for
+		example with the "sspi" command.
+
+		CONFIG_CMD_E1000
+		Management command for E1000 devices.  When used on devices
+		with SPI support you can reprogram the EEPROM from U-Boot.
 
 		CONFIG_E1000_FALLBACK_MAC
 		default MAC for empty EEPROM after production.
@@ -1014,6 +1027,12 @@ The following options need to be configured:
 			Define this to use i/o functions instead of macros
 			(some hardware wont work with macros)
 
+		CONFIG_DRIVER_TI_EMAC
+		Support for davinci emac
+
+			CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT
+			Define this if you have more then 3 PHYs.
+
 		CONFIG_FTGMAC100
 		Support for Faraday's FTGMAC100 Gigabit SoC Ethernet
 
@@ -1891,7 +1910,7 @@ The following options need to be configured:
 		CONFIG_MXC_SPI
 
 		Enables the driver for the SPI controllers on i.MX and MXC
-		SoCs. Currently only i.MX31 is supported.
+		SoCs. Currently i.MX31/35/51 are supported.
 
 - FPGA Support: CONFIG_FPGA
 
@@ -3244,6 +3263,11 @@ Low Level (hardware related) configuration options:
 		that is executed before the actual U-Boot. E.g. when
 		compiling a NAND SPL.
 
+- CONFIG_SYS_NAND_HW_ECC_OOBFIRST
+		define this, if you want to read first the oob data
+		and then the data. This is used for example on
+		davinci plattforms.
+
 - CONFIG_USE_ARCH_MEMCPY
   CONFIG_USE_ARCH_MEMSET
 		If these options are used a optimized version of memcpy/memset will