X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=216f0c70aa9403534127dcd256627fa55e12f08e;hb=19bb5e4ba0e808dd9234319267f3e551d288331b;hp=413d6828292dc0154c303711b34ad231f312f38e;hpb=4e5b1bd0dff216b00d7ce9a5201dfe173805a06c;p=u-boot

diff --git a/README b/README
index 413d682829..216f0c70aa 100644
--- a/README
+++ b/README
@@ -492,6 +492,16 @@ The following options need to be configured:
 		CONFIG_SYS_FSL_DDR_LE
 		Defines the DDR controller register space as Little Endian
 
+		CONFIG_SYS_FSL_DDR_SDRAM_BASE_PHY
+		Physical address from the view of DDR controllers. It is the
+		same as CONFIG_SYS_DDR_SDRAM_BASE for  all Power SoCs. But
+		it could be different for ARM SoCs.
+
+		CONFIG_SYS_FSL_DDR_INTLV_256B
+		DDR controller interleaving on 256-byte. This is a special
+		interleaving mode, handled by Dickens for Freescale layerscape
+		SoCs with ARM core.
+
 - Intel Monahans options:
 		CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO
 
@@ -1731,7 +1741,7 @@ CBFS (Coreboot Filesystem) support
 
 		If this option is set, then U-Boot will prevent the environment
 		variable "splashimage" from being set to a problematic address
-		(see README.displaying-bmps and README.arm-unaligned-accesses).
+		(see README.displaying-bmps).
 		This option is useful for targets where, due to alignment
 		restrictions, an improperly aligned BMP image will cause a data
 		abort. If you think you will not have problems with unaligned
@@ -3460,6 +3470,9 @@ typically in board_init_f() and board_init_r().
 Configuration Settings:
 -----------------------
 
+- CONFIG_SYS_SUPPORT_64BIT_DATA: Defined automatically if compiled as 64-bit.
+		Optionally it can be defined to support 64-bit memory commands.
+
 - CONFIG_SYS_LONGHELP: Defined when you want long help messages included;
 		undefine this when you're short of memory.
 
@@ -3732,12 +3745,6 @@ Configuration Settings:
 	its config.mk file). If you find problems enabling this option on
 	your board please report the problem and send patches!
 
-- CONFIG_SYS_SYM_OFFSETS
-	This is set by architectures that use offsets for link symbols
-	instead of absolute values. So bss_start is obtained using an
-	offset _bss_start_ofs from CONFIG_SYS_TEXT_BASE, rather than
-	directly. You should not need to touch this setting.
-
 - CONFIG_OMAP_PLATFORM_RESET_TIME_MAX_USEC (OMAP only)
 	This is set by OMAP boards for the max time that reset should
 	be asserted. See doc/README.omap-reset-time for details on how