X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=246ae2badca47cefc8106de76bc2adfbbee859e4;hb=refs%2Fheads%2FGPL-Cleanup;hp=ca415d38b1f7f3c41e54653331a4ba9b4f4a30a1;hpb=6973fb414c36b25b4622917d6a223510be0678f5;p=u-boot

diff --git a/README b/README
index ca415d38b1..246ae2badc 100644
--- a/README
+++ b/README
@@ -603,7 +603,6 @@ The following options need to be configured:
 		CONFIG_CMD_DATE		* support for RTC, date/time...
 		CONFIG_CMD_DHCP		* DHCP support
 		CONFIG_CMD_DIAG		* Diagnostics
-		CONFIG_CMD_DOC		* Disk-On-Chip Support
 		CONFIG_CMD_DS4510	* ds4510 I2C gpio commands
 		CONFIG_CMD_DS4510_INFO	* ds4510 I2C info command
 		CONFIG_CMD_DS4510_MEM	* ds4510 I2C eeprom/sram commansd
@@ -630,6 +629,8 @@ The following options need to be configured:
 		CONFIG_CMD_KGDB		* kgdb
 		CONFIG_CMD_LOADB	  loadb
 		CONFIG_CMD_LOADS	  loads
+		CONFIG_CMD_MD5SUM	  print md5 message digest
+					  (requires CONFIG_CMD_MEMORY and CONFIG_MD5)
 		CONFIG_CMD_MEMORY	  md, mm, nm, mw, cp, cmp, crc, base,
 					  loop, loopw, mtest
 		CONFIG_CMD_MISC		  Misc functions like sleep etc
@@ -653,6 +654,8 @@ The following options need to be configured:
 					  (requires CONFIG_CMD_I2C)
 		CONFIG_CMD_SETGETDCR	  Support for DCR Register access
 					  (4xx only)
+		CONFIG_CMD_SHA1		  print sha1 memory digest
+					  (requires CONFIG_CMD_MEMORY)
 		CONFIG_CMD_SOURCE	  "source" command Support
 		CONFIG_CMD_SPI		* SPI serial bus support
 		CONFIG_CMD_USB		* USB support
@@ -855,9 +858,13 @@ The following options need to be configured:
 		MPC5200 USB requires additional defines:
 			CONFIG_USB_CLOCK
 				for 528 MHz Clock: 0x0001bbbb
+			CONFIG_PSC3_USB
+				for USB on PSC3
 			CONFIG_USB_CONFIG
 				for differential drivers: 0x00001000
 				for single ended drivers: 0x00005000
+				for differential drivers on PSC3: 0x00000100
+				for single ended drivers on PSC3: 0x00004100
 			CONFIG_SYS_USB_EVENT_POLL
 				May be defined to allow interrupt polling
 				instead of using asynchronous interrupts
@@ -1074,6 +1081,26 @@ The following options need to be configured:
 		allows for a "silent" boot where a splash screen is
 		loaded very quickly after power-on.
 
+		CONFIG_SPLASH_SCREEN_ALIGN
+
+		If this option is set the splash image can be freely positioned
+		on the screen. Environment variable "splashpos" specifies the
+		position as "x,y". If a positive number is given it is used as
+		number of pixel from left/top. If a negative number is given it
+		is used as number of pixel from right/bottom. You can also
+		specify 'm' for centering the image.
+
+		Example:
+		setenv splashpos m,m
+			=> image at center of screen
+
+		setenv splashpos 30,20
+			=> image at x = 30 and y = 20
+
+		setenv splashpos -10,m
+			=> vertically centered image
+			   at x = dspWidth - bmpWidth - 9
+
 - Gzip compressed BMP image support: CONFIG_VIDEO_BMP_GZIP
 
 		If this option is set, additionally to standard BMP
@@ -1165,6 +1192,11 @@ The following options need to be configured:
 		Defines a default value for the IP address of a TFTP
 		server to contact when using the "tftboot" command.
 
+		CONFIG_KEEP_SERVERADDR
+
+		Keeps the server's MAC address, in the env 'serveraddr'
+		for passing to bootargs (like Linux's netconsole option)
+
 - Multicast TFTP Mode:
 		CONFIG_MCAST_TFTP