X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=2dc098462dd3cdb0d151928efa0b31ce3e8d05b5;hb=673a524b6a71a7ab74a48b75728307b1a5303587;hp=5793b0a2069ad5c2fac40f29c7b9c9a5c4d1e5f2;hpb=5675b509165b67465a20e5cf71e07f40b449ef0c;p=u-boot diff --git a/README b/README index 5793b0a206..2dc098462d 100644 --- a/README +++ b/README @@ -363,6 +363,12 @@ The following options need to be configured: ICache only when Code runs from RAM. - 85xx CPU Options: + CONFIG_SYS_PPC64 + + Specifies that the core is a 64-bit PowerPC implementation (implements + the "64" category of the Power ISA). This is necessary for ePAPR + compliance, among other possible reasons. + CONFIG_SYS_FSL_TBCLK_DIV Defines the core time base clock divider ratio compared to the @@ -655,6 +661,10 @@ The following options need to be configured: additional board info beside the logo + When CONFIG_CFB_CONSOLE_ANSI is defined, console will support + a limited number of ANSI escape sequences (cursor control, + erase functions and limited graphics rendition control). + When CONFIG_CFB_CONSOLE is defined, video console is default i/o. Serial console can be forced with environment 'console=serial'. @@ -704,6 +714,8 @@ The following options need to be configured: - Boot Delay: CONFIG_BOOTDELAY - in seconds Delay before automatically booting the default image; set to -1 to disable autoboot. + set to -2 to autoboot with no delay and not check for abort + (even when CONFIG_ZERO_BOOTDELAY_CHECK is defined). See doc/README.autoboot for these options that work with CONFIG_BOOTDELAY. None are required. @@ -799,9 +811,11 @@ The following options need to be configured: CONFIG_CMD_EEPROM * EEPROM read/write support CONFIG_CMD_ELF * bootelf, bootvx CONFIG_CMD_EXPORTENV * export the environment + CONFIG_CMD_EXT2 * ext2 command support + CONFIG_CMD_EXT4 * ext4 command support CONFIG_CMD_SAVEENV saveenv CONFIG_CMD_FDC * Floppy Disk Support - CONFIG_CMD_FAT * FAT partition support + CONFIG_CMD_FAT * FAT command support CONFIG_CMD_FDOS * Dos diskette Support CONFIG_CMD_FLASH flinfo, erase, protect CONFIG_CMD_FPGA FPGA device initialization support @@ -814,6 +828,7 @@ The following options need to be configured: CONFIG_CMD_IMLS List all found images CONFIG_CMD_IMMAP * IMMR dump support CONFIG_CMD_IMPORTENV * import an environment + CONFIG_CMD_INI * import data from an ini file into the env CONFIG_CMD_IRQ * irqinfo CONFIG_CMD_ITEST Integer/string test of 2 values CONFIG_CMD_JFFS2 * JFFS2 Support @@ -855,7 +870,8 @@ The following options need to be configured: CONFIG_CMD_SPI * SPI serial bus support CONFIG_CMD_TFTPSRV * TFTP transfer in server mode CONFIG_CMD_TFTPPUT * TFTP put command (upload) - CONFIG_CMD_TIME * run command and report execution time + CONFIG_CMD_TIME * run command and report execution time (ARM specific) + CONFIG_CMD_TIMER * access to the system tick timer CONFIG_CMD_USB * USB support CONFIG_CMD_CDP * Cisco Discover Protocol support CONFIG_CMD_MFSL * Microblaze FSL support @@ -1029,6 +1045,9 @@ The following options need to be configured: devices. CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz) + The environment variable 'scsidevs' is set to the number of + SCSI devices found during the last scan. + - NETWORK Support (PCI): CONFIG_E1000 Support for Intel 8254x/8257x gigabit chips. @@ -1080,7 +1099,7 @@ The following options need to be configured: CONFIG_CALXEDA_XGMAC Support for the Calxeda XGMAC device - CONFIG_DRIVER_LAN91C96 + CONFIG_LAN91C96 Support for SMSC's LAN91C96 chips. CONFIG_LAN91C96_BASE @@ -1090,7 +1109,7 @@ The following options need to be configured: CONFIG_LAN91C96_USE_32_BIT Define this to enable 32 bit addressing - CONFIG_DRIVER_SMC91111 + CONFIG_SMC91111 Support for SMSC's LAN91C111 chip CONFIG_SMC91111_BASE @@ -1264,6 +1283,9 @@ The following options need to be configured: viewport is supported. To enable the ULPI layer support, define CONFIG_USB_ULPI and CONFIG_USB_ULPI_VIEWPORT in your board configuration file. + If your ULPI phy needs a different reference clock than the + standard 24 MHz then you have to define CONFIG_ULPI_REF_CLK to + the appropriate value in Hz. - MMC Support: The MMC controller on the Intel PXA is supported. To @@ -1309,6 +1331,13 @@ The following options need to be configured: This will also enable the command "fatwrite" enabling the user to write files to FAT. +CBFS (Coreboot Filesystem) support + CONFIG_CMD_CBFS + + Define this to enable support for reading from a Coreboot + filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls + and cbfsload. + - Keyboard Support: CONFIG_ISA_KEYBOARD @@ -1440,6 +1469,11 @@ The following options need to be configured: Normally display is black on white background; define CONFIG_SYS_WHITE_ON_BLACK to get it inverted. + CONFIG_LCD_BMP_RLE8 + + Support drawing of RLE8-compressed bitmaps on the LCD. + + - Splash Screen Support: CONFIG_SPLASH_SCREEN If this option is set, the environment is checked for @@ -1483,6 +1517,12 @@ The following options need to be configured: can be displayed via the splashscreen support or the bmp command. +- Do compresssing for memory range: + CONFIG_CMD_ZIP + + If this option is set, it would use zlib deflate method + to compress the specified memory at its best effort. + - Compression support: CONFIG_BZIP2 @@ -2156,8 +2196,8 @@ The following options need to be configured: following board configurations are known to be "pRAM-clean": - ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL, - HERMES, IP860, RPXlite, LWMON, LANTEC, + IVMS8, IVML24, SPD8xx, TQM8xxL, + HERMES, IP860, RPXlite, LWMON, FLAGADM, TQM8260 - Error Recovery: @@ -2283,6 +2323,12 @@ The following options need to be configured: - CONFIG_SYS_VENDOR - CONFIG_SYS_SOC + CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG + + Define this in order to add variables describing certain + run-time determined information about the hardware to the + environment. These will be named board_name, board_rev. + - DataFlash Support: CONFIG_HAS_DATAFLASH @@ -2378,6 +2424,31 @@ The following options need to be configured: 29,916,167 26,005,792 bootm_start 30,361,327 445,160 start_kernel + CONFIG_CMD_BOOTSTAGE + Add a 'bootstage' command which supports printing a report + and un/stashing of bootstage data. + + CONFIG_BOOTSTAGE_FDT + Stash the bootstage information in the FDT. A root 'bootstage' + node is created with each bootstage id as a child. Each child + has a 'name' property and either 'mark' containing the + mark time in microsecond, or 'accum' containing the + accumulated time for that bootstage id in microseconds. + For example: + + bootstage { + 154 { + name = "board_init_f"; + mark = <3575678>; + }; + 170 { + name = "lcd"; + accum = <33482>; + }; + }; + + Code in the Linux kernel can find this in /proc/devicetree. + Legacy uImage format: Arg Where When @@ -2597,6 +2668,15 @@ FIT uImage format: CONFIG_SYS_SPL_MALLOC_SIZE The size of the malloc pool used in SPL. + CONFIG_SPL_FRAMEWORK + Enable the SPL framework under common/. This framework + supports MMC, NAND and YMODEM loading of U-Boot and NAND + NAND loading of the Linux Kernel. + + CONFIG_SPL_DISPLAY_PRINT + For ARM, enable an optional function to print more information + about the running system. + CONFIG_SPL_LIBCOMMON_SUPPORT Support for common/libcommon.o in SPL binary @@ -2660,6 +2740,9 @@ FIT uImage format: CONFIG_SPL_SPI_SUPPORT Support for drivers/spi/libspi.o in SPL binary + CONFIG_SPL_RAM_DEVICE + Support for running image already present in ram, in SPL binary + CONFIG_SPL_LIBGENERIC_SUPPORT Support for lib/libgeneric.o in SPL binary @@ -4670,7 +4753,10 @@ Over time, many people have reported problems when trying to use the consider minicom to be broken, and recommend not to use it. Under Unix, I recommend to use C-Kermit for general purpose use (and especially for kermit binary protocol download ("loadb" command), and -use "cu" for S-Record download ("loads" command). +use "cu" for S-Record download ("loads" command). See +http://www.denx.de/wiki/view/DULG/SystemSetup#Section_4.3. +for help with kermit. + Nevertheless, if you absolutely want to use it try adding this configuration to your "File transfer protocols" section: