X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=53fc28e7606524702717a99e21cad0c28b76e013;hb=6731bc8db4fe644b008e9b844aee043c6063f8af;hp=ee65fdb4c6666c5fef1fed2d4abc9e8a740ea471;hpb=b939689c7b87773c44275a578ffc8674a867e39d;p=u-boot diff --git a/README b/README index ee65fdb4c6..53fc28e760 100644 --- a/README +++ b/README @@ -948,6 +948,9 @@ The following options need to be configured: bytes are output before the console is initialised, the earlier bytes are discarded. + Note that when printing the buffer a copy is made on the + stack so CONFIG_PRE_CON_BUF_SZ must fit on the stack. + 'Sane' compilers will generate smaller code if CONFIG_PRE_CON_BUF_SZ is a power of 2 @@ -974,8 +977,6 @@ The following options need to be configured: CONFIG_AUTOBOOT_PROMPT CONFIG_AUTOBOOT_DELAY_STR CONFIG_AUTOBOOT_STOP_STR - CONFIG_AUTOBOOT_DELAY_STR2 - CONFIG_AUTOBOOT_STOP_STR2 CONFIG_ZERO_BOOTDELAY_CHECK CONFIG_RESET_TO_RETRY @@ -1047,9 +1048,7 @@ The following options need to be configured: Monitor commands can be included or excluded from the build by using the #include files and #undef'ing unwanted - commands, or using - and augmenting with additional #define's - for wanted commands. + commands, or adding #define's for wanted commands. The default command configuration includes all commands except those marked below with a "*". @@ -1873,12 +1872,6 @@ CBFS (Coreboot Filesystem) support boot. See the documentation file README.video for a description of this variable. - CONFIG_VIDEO_VGA - - Enable the VGA video / BIOS for x86. The alternative if you - are using coreboot is to use the coreboot frame buffer - driver. - - Keyboard Support: CONFIG_KEYBOARD @@ -2113,18 +2106,6 @@ CBFS (Coreboot Filesystem) support Some PHY like Intel LXT971A need extra delay after command issued before MII status register can be read -- Ethernet address: - CONFIG_ETHADDR - CONFIG_ETH1ADDR - CONFIG_ETH2ADDR - CONFIG_ETH3ADDR - CONFIG_ETH4ADDR - CONFIG_ETH5ADDR - - Define a default value for Ethernet address to use - for the respective Ethernet interface, in case this - is not determined automatically. - - IP address: CONFIG_IPADDR @@ -2879,8 +2860,8 @@ CBFS (Coreboot Filesystem) support completely disabled. Anybody can change or delete these parameters. - Alternatively, if you #define _both_ CONFIG_ETHADDR - _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default + Alternatively, if you define _both_ an ethaddr in the + default env _and_ CONFIG_OVERWRITE_ETHADDR_ONCE, a default Ethernet address is installed in the environment, which can be changed exactly ONCE by the user. [The serial# is unaffected by this, i. e. it remains @@ -3054,6 +3035,19 @@ CBFS (Coreboot Filesystem) support this is instead controlled by the value of /config/load-environment. +- Parallel Flash support: + CONFIG_SYS_NO_FLASH + + Traditionally U-boot was run on systems with parallel NOR + flash. This option is used to disable support for parallel NOR + flash. This option should be defined if the board does not have + parallel flash. + + If this option is not defined one of the generic flash drivers + (e.g. CONFIG_FLASH_CFI_DRIVER or CONFIG_ST_SMI) must be + selected or the board must provide an implementation of the + flash API (see include/flash.h). + - DataFlash Support: CONFIG_HAS_DATAFLASH @@ -3085,11 +3079,6 @@ CBFS (Coreboot Filesystem) support Define this option to include a destructive SPI flash test ('sf test'). - CONFIG_SPI_FLASH_BAR Ban/Extended Addr Reg - - Define this option to use the Bank addr/Extended addr - support on SPI flashes which has size > 16Mbytes. - CONFIG_SF_DUAL_FLASH Dual flash memories Define this option to use dual flash support where two flash @@ -4157,6 +4146,10 @@ Configuration Settings: list, simply add an entry for the same variable name to the ".flags" variable. + If CONFIG_REGEX is defined, the variable_name above is evaluated as a + regular expression. This allows multiple variables to define the same + flags without explicitly listing them for each variable. + - CONFIG_ENV_ACCESS_IGNORE_FORCE If defined, don't allow the -f switch to env set override variable access flags. @@ -5479,7 +5472,7 @@ loaded to, and "Flash Location" gives the image's address in NOR flash or offset in NAND flash. *Note* - these variables don't have to be defined for all boards, some -boards currenlty use other variables for these purposes, and some +boards currently use other variables for these purposes, and some boards use these variables for other purposes. Image File Name RAM Address Flash Location @@ -5555,6 +5548,10 @@ override any association in the static list. You can define CONFIG_ENV_CALLBACK_LIST_DEFAULT to a list (string) to define the ".callbacks" environment variable in the default or embedded environment. +If CONFIG_REGEX is defined, the variable_name above is evaluated as a +regular expression. This allows multiple variables to be connected to +the same callback without explicitly listing them all out. + Command Line Parsing: ===================== @@ -5629,7 +5626,8 @@ o If both the SROM and the environment contain a MAC address, and the warning is printed. o If neither SROM nor the environment contain a MAC address, an error - is raised. + is raised. If CONFIG_NET_RANDOM_ETHADDR is defined, then in this case + a random, locally-assigned MAC is used. If Ethernet drivers implement the 'write_hwaddr' function, valid MAC addresses will be programmed into hardware as part of the initialization process. This