X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=67dc444bd4d0bbe92d2cefcf45b220d079f98c37;hb=ac486e3ba16c37514d135c359f61ed6e32a2921d;hp=79016e690ace8899488e54ee7a35e1715018e9a2;hpb=5f6db68b42024b51a9a1fddd7d4371d2af82c090;p=u-boot diff --git a/README b/README index 79016e690a..67dc444bd4 100644 --- a/README +++ b/README @@ -432,6 +432,14 @@ The following options need to be configured: Select high exception vectors of the ARM core, e.g., do not clear the V bit of the c1 register of CP15. + CONFIG_SYS_THUMB_BUILD + + Use this flag to build U-Boot using the Thumb instruction + set for ARM architectures. Thumb instruction set provides + better code density. For ARM architectures that support + Thumb2 this flag will result in Thumb2 code generated by + GCC. + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -777,6 +785,8 @@ The following options need to be configured: CONFIG_CMD_JFFS2 * JFFS2 Support CONFIG_CMD_KGDB * kgdb CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) + CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration + (169.254.*.*) CONFIG_CMD_LOADB loadb CONFIG_CMD_LOADS loads CONFIG_CMD_MD5SUM print md5 message digest @@ -1584,10 +1594,17 @@ The following options need to be configured: CONFIG_BOOTP_NTPSERVER CONFIG_BOOTP_TIMEOFFSET CONFIG_BOOTP_VENDOREX + CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip environment variable, not the BOOTP server. + CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found + after the configured retry count, the call will fail + instead of starting over. This can be used to fail over + to Link-local IP address configuration if the DHCP server + is not available. + CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS serverip from a DHCP server, it is possible that more than one DNS serverip is offered to the client. @@ -1618,6 +1635,14 @@ The following options need to be configured: the DHCP timeout and retry process takes a longer than this delay. + - Link-local IP address negotiation: + Negotiate with other link-local clients on the local network + for an address that doesn't require explicit configuration. + This is especially useful if a DHCP server cannot be guaranteed + to exist in all environments that the device must operate. + + See doc/README.link-local for more information. + - CDP Options: CONFIG_CDP_DEVICE_ID