X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=67dc444bd4d0bbe92d2cefcf45b220d079f98c37;hb=f1adefd2393f0322c1c1db8e813e65d95c752cd0;hp=90a79bfbccef86239f2929a940138e26896adf3c;hpb=017e1f3f9fc8745cc12bbd924b0cbc4d6ee5dbf8;p=u-boot diff --git a/README b/README index 90a79bfbcc..67dc444bd4 100644 --- a/README +++ b/README @@ -374,6 +374,12 @@ The following options need to be configured: Defines the string to utilize when trying to match PCIe device tree nodes for the given platform. +- Generic CPU options: + CONFIG_SYS_BIG_ENDIAN, CONFIG_SYS_LITTLE_ENDIAN + + Defines the endianess of the CPU. Implementation of those + values is arch specific. + - Intel Monahans options: CONFIG_SYS_MONAHANS_RUN_MODE_OSC_RATIO @@ -426,6 +432,14 @@ The following options need to be configured: Select high exception vectors of the ARM core, e.g., do not clear the V bit of the c1 register of CP15. + CONFIG_SYS_THUMB_BUILD + + Use this flag to build U-Boot using the Thumb instruction + set for ARM architectures. Thumb instruction set provides + better code density. For ARM architectures that support + Thumb2 this flag will result in Thumb2 code generated by + GCC. + - Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ @@ -771,6 +785,8 @@ The following options need to be configured: CONFIG_CMD_JFFS2 * JFFS2 Support CONFIG_CMD_KGDB * kgdb CONFIG_CMD_LDRINFO ldrinfo (display Blackfin loader) + CONFIG_CMD_LINK_LOCAL * link-local IP address auto-configuration + (169.254.*.*) CONFIG_CMD_LOADB loadb CONFIG_CMD_LOADS loads CONFIG_CMD_MD5SUM print md5 message digest @@ -808,7 +824,7 @@ The following options need to be configured: CONFIG_CMD_TIME * run command and report execution time CONFIG_CMD_USB * USB support CONFIG_CMD_CDP * Cisco Discover Protocol support - CONFIG_CMD_FSL * Microblaze FSL support + CONFIG_CMD_MFSL * Microblaze FSL support EXAMPLE: If you want all functions except of network @@ -1151,6 +1167,14 @@ The following options need to be configured: Define this to have a tty type of device available to talk to the UDC device + CONFIG_USBD_HS + Define this to enable the high speed support for usb + device and usbtty. If this feature is enabled, a routine + int is_usbd_high_speed(void) + also needs to be defined by the driver to dynamically poll + whether the enumeration has succeded at high speed or full + speed. + CONFIG_SYS_CONSOLE_IS_IN_ENV Define this if you want stdin, stdout &/or stderr to be set to usbtty. @@ -1570,10 +1594,17 @@ The following options need to be configured: CONFIG_BOOTP_NTPSERVER CONFIG_BOOTP_TIMEOFFSET CONFIG_BOOTP_VENDOREX + CONFIG_BOOTP_MAY_FAIL CONFIG_BOOTP_SERVERIP - TFTP server will be the serverip environment variable, not the BOOTP server. + CONFIG_BOOTP_MAY_FAIL - If the DHCP server is not found + after the configured retry count, the call will fail + instead of starting over. This can be used to fail over + to Link-local IP address configuration if the DHCP server + is not available. + CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS serverip from a DHCP server, it is possible that more than one DNS serverip is offered to the client. @@ -1604,6 +1635,14 @@ The following options need to be configured: the DHCP timeout and retry process takes a longer than this delay. + - Link-local IP address negotiation: + Negotiate with other link-local clients on the local network + for an address that doesn't require explicit configuration. + This is especially useful if a DHCP server cannot be guaranteed + to exist in all environments that the device must operate. + + See doc/README.link-local for more information. + - CDP Options: CONFIG_CDP_DEVICE_ID @@ -3012,6 +3051,24 @@ to save the current settings. environment area within the total memory of your DataFlash placed at the specified address. +- CONFIG_ENV_IS_IN_REMOTE: + + Define this if you have a remote memory space which you + want to use for the local device's environment. + + - CONFIG_ENV_ADDR: + - CONFIG_ENV_SIZE: + + These two #defines specify the address and size of the + environment area within the remote memory space. The + local device can get the environment from remote memory + space by SRIO or other links. + +BE CAREFUL! For some special cases, the local device can not use +"saveenv" command. For example, the local device will get the +environment stored in a remote NOR flash by SRIO link, but it can +not erase, write this NOR flash by SRIO interface. + - CONFIG_ENV_IS_IN_NAND: Define this if you have a NAND device which you want to use @@ -3448,6 +3505,12 @@ within that device. Specifies that QE/FMAN firmware is located on the primary SPI device. CONFIG_SYS_FMAN_FW_ADDR is the byte offset on that device. +- CONFIG_SYS_QE_FMAN_FW_IN_REMOTE + Specifies that QE/FMAN firmware is located in the remote (master) + memory space. CONFIG_SYS_FMAN_FW_ADDR is a virtual address which + can be mapped from slave TLB->slave LAW->slave SRIO outbound window + ->master inbound window->master LAW->the ucode address in master's + NOR flash. Building the Software: ====================== @@ -3485,7 +3548,7 @@ is done by typing: make NAME_config where "NAME_config" is the name of one of the existing configu- -rations; see the main Makefile for supported names. +rations; see boards.cfg for supported names. Note: for some board special configuration names may exist; check if additional information is available from the board vendor; for @@ -3540,10 +3603,8 @@ to port U-Boot to your hardware platform. To do this, follow these steps: 1. Add a new configuration option for your board to the toplevel - "Makefile" and to the "MAKEALL" script, using the existing - entries as examples. Note that here and at many other places - boards and other names are listed in alphabetical sort order. Please - keep this order. + "boards.cfg" file, using the existing entries as examples. + Follow the instructions there to keep the boards in order. 2. Create a new directory to hold your board specific code. Add any files you need. In your board directory, you will need at least the "Makefile", a ".c", "flash.c" and "u-boot.lds".