X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=7594f3caae6a906fdc71884939bc470fd3f349a3;hb=7e3caa81e0e9cc5e2beed4a3a1c334e2119f4498;hp=242287ca9b930c6a33a8bd9b523b8b48d22da856;hpb=002e91087c817f8281fccee327e0d8e98c691a2f;p=u-boot diff --git a/README b/README index 242287ca9b..7594f3caae 100644 --- a/README +++ b/README @@ -1028,21 +1028,6 @@ The following options need to be configured: control registers. This behavior won't affect the correctnessof 10/100 link speed update. - CONFIG_SMC911X - Support for SMSC's LAN911x and LAN921x chips - - CONFIG_SMC911X_BASE - Define this to hold the physical address - of the device (I/O space) - - CONFIG_SMC911X_32_BIT - Define this if data bus is 32 bits - - CONFIG_SMC911X_16_BIT - Define this if data bus is 16 bits. If your processor - automatically converts one 32 bit word to two 16 bit - words you may also try CONFIG_SMC911X_32_BIT. - CONFIG_SH_ETHER Support for Renesas on-chip Ethernet controller @@ -2183,16 +2168,6 @@ The following options need to be configured: currently only supports clearing the memory. - Error Recovery: - CONFIG_PANIC_HANG - - Define this variable to stop the system in case of a - fatal error, so that you have to reset it manually. - This is probably NOT a good idea for an embedded - system where you want the system to reboot - automatically as fast as possible, but it may be - useful during development since you can try to debug - the conditions that lead to the situation. - CONFIG_NET_RETRY_COUNT This variable defines the number of retries for @@ -2377,6 +2352,13 @@ The following options need to be configured: CONFIG_SYS_BOOTCOUNT_ADDR = i2c addr which is used for the bootcounter. CONFIG_BOOTCOUNT_ALEN = address len + CONFIG_BOOTCOUNT_EXT + enable support for the bootcounter in EXT filesystem + CONFIG_SYS_BOOTCOUNT_ADDR = RAM address used for read + and write. + CONFIG_SYS_BOOTCOUNT_EXT_INTERFACE = interface + CONFIG_SYS_BOOTCOUNT_EXT_DEVPART = device and part + CONFIG_SYS_BOOTCOUNT_EXT_NAME = filename - Show boot progress: CONFIG_SHOW_BOOT_PROGRESS @@ -5134,8 +5116,9 @@ Coding Standards: ----------------- All contributions to U-Boot should conform to the Linux kernel -coding style; see the file "Documentation/CodingStyle" and the script -"scripts/Lindent" in your Linux kernel source directory. +coding style; see the kernel coding style guide at +https://www.kernel.org/doc/html/latest/process/coding-style.html, and the +script "scripts/Lindent" in your Linux kernel source directory. Source files originating from a different project (for example the MTD subsystem) are generally exempt from these guidelines and are not @@ -5167,7 +5150,7 @@ may be rejected, even when they contain important and valuable stuff. Please see http://www.denx.de/wiki/U-Boot/Patches for details. Patches shall be sent to the u-boot mailing list ; -see http://lists.denx.de/mailman/listinfo/u-boot +see https://lists.denx.de/listinfo/u-boot When you send a patch, please include the following information with it: