X-Git-Url: https://git.sur5r.net/?a=blobdiff_plain;f=README;h=a9c052c0592ff4aaa5e1ba03e992ee9d6a6b7adb;hb=8f0b7cbe8027c3745f5e0a199ecd152b032d8ad0;hp=8b2b1af2fc086fa5a3c78df5bf89aec3591a2af6;hpb=945af8d723a29e9b6289d84250745ed0dc16fc81;p=u-boot diff --git a/README b/README index 8b2b1af2fc..a9c052c059 100644 --- a/README +++ b/README @@ -1,5 +1,5 @@ # -# (C) Copyright 2000 - 2002 +# (C) Copyright 2000 - 2005 # Wolfgang Denk, DENX Software Engineering, wd@denx.de. # # See file CREDITS for list of people who contributed to this @@ -25,9 +25,10 @@ Summary: ======== This directory contains the source code for U-Boot, a boot loader for -Embedded boards based on PowerPC and ARM processors, which can be -installed in a boot ROM and used to initialize and test the hardware -or to download and run application code. +Embedded boards based on PowerPC, ARM, MIPS and several other +processors, which can be installed in a boot ROM and used to +initialize and test the hardware or to download and run application +code. The development of U-Boot is closely related to Linux: some parts of the source code originate in the Linux source tree, we have some @@ -119,123 +120,53 @@ U-Boot will always have a patchlevel of "0". Directory Hierarchy: ==================== -- board Board dependend files -- common Misc architecture independend functions +- board Board dependent files +- common Misc architecture independent functions - cpu CPU specific files + - 74xx_7xx Files specific to Freescale MPC74xx and 7xx CPUs + - arm720t Files specific to ARM 720 CPUs + - arm920t Files specific to ARM 920 CPUs + - imx Files specific to Freescale MC9328 i.MX CPUs + - s3c24x0 Files specific to Samsung S3C24X0 CPUs + - arm925t Files specific to ARM 925 CPUs + - arm926ejs Files specific to ARM 926 CPUs + - arm1136 Files specific to ARM 1136 CPUs + - at91rm9200 Files specific to Atmel AT91RM9200 CPUs + - i386 Files specific to i386 CPUs + - ixp Files specific to Intel XScale IXP CPUs + - mcf52x2 Files specific to Freescale ColdFire MCF52x2 CPUs + - mips Files specific to MIPS CPUs + - mpc5xx Files specific to Freescale MPC5xx CPUs + - mpc5xxx Files specific to Freescale MPC5xxx CPUs + - mpc8xx Files specific to Freescale MPC8xx CPUs + - mpc8220 Files specific to Freescale MPC8220 CPUs + - mpc824x Files specific to Freescale MPC824x CPUs + - mpc8260 Files specific to Freescale MPC8260 CPUs + - mpc85xx Files specific to Freescale MPC85xx CPUs + - nios Files specific to Altera NIOS CPUs + - nios2 Files specific to Altera Nios-II CPUs + - ppc4xx Files specific to IBM PowerPC 4xx CPUs + - pxa Files specific to Intel XScale PXA CPUs + - s3c44b0 Files specific to Samsung S3C44B0 CPUs + - sa1100 Files specific to Intel StrongARM SA1100 CPUs - disk Code for disk drive partition handling - doc Documentation (don't expect too much) -- drivers Common used device drivers +- drivers Commonly used device drivers - dtt Digital Thermometer and Thermostat drivers - examples Example code for standalone applications, etc. - include Header Files -- disk Harddisk interface code +- lib_arm Files generic to ARM architecture +- lib_generic Files generic to all architectures +- lib_i386 Files generic to i386 architecture +- lib_m68k Files generic to m68k architecture +- lib_mips Files generic to MIPS architecture +- lib_nios Files generic to NIOS architecture +- lib_ppc Files generic to PowerPC architecture - net Networking code -- ppc Files generic to PowerPC architecture - post Power On Self Test -- post/arch Symlink to architecture specific Power On Self Test -- post/arch-ppc PowerPC architecture specific Power On Self Test -- post/cpu/mpc8260 MPC8260 CPU specific Power On Self Test -- post/cpu/mpc8xx MPC8xx CPU specific Power On Self Test - rtc Real Time Clock drivers - tools Tools to build S-Record or U-Boot images, etc. -- cpu/74xx_7xx Files specific to Motorola MPC74xx and 7xx CPUs -- cpu/arm925t Files specific to ARM 925 CPUs -- cpu/mpc5xx Files specific to Motorola MPC5xx CPUs -- cpu/mpc8xx Files specific to Motorola MPC8xx CPUs -- cpu/mpc824x Files specific to Motorola MPC824x CPUs -- cpu/mpc8260 Files specific to Motorola MPC8260 CPU -- cpu/ppc4xx Files specific to IBM 4xx CPUs - - -- board/LEOX/ Files specific to boards manufactured by The LEOX team -- board/LEOX/elpt860 Files specific to ELPT860 boards -- board/RPXClassic - Files specific to RPXClassic boards -- board/RPXlite Files specific to RPXlite boards -- board/at91rm9200dk Files specific to AT91RM9200DK boards -- board/c2mon Files specific to c2mon boards -- board/cmi Files specific to cmi boards -- board/cogent Files specific to Cogent boards - (need further configuration) - Files specific to CPCIISER4 boards -- board/cpu86 Files specific to CPU86 boards -- board/cray/ Files specific to boards manufactured by Cray -- board/cray/L1 Files specific to L1 boards -- board/cu824 Files specific to CU824 boards -- board/ebony Files specific to IBM Ebony board -- board/eric Files specific to ERIC boards -- board/esd/ Files specific to boards manufactured by ESD -- board/esd/adciop Files specific to ADCIOP boards -- board/esd/ar405 Files specific to AR405 boards -- board/esd/canbt Files specific to CANBT boards -- board/esd/cpci405 Files specific to CPCI405 boards -- board/esd/cpciiser4 Files specific to CPCIISER4 boards -- board/esd/common Common files for ESD boards -- board/esd/dasa_sim Files specific to DASA_SIM boards -- board/esd/du405 Files specific to DU405 boards -- board/esd/ocrtc Files specific to OCRTC boards -- board/esd/pci405 Files specific to PCI405 boards -- board/esteem192e - Files specific to ESTEEM192E boards -- board/etx094 Files specific to ETX_094 boards -- board/evb64260 - Files specific to EVB64260 boards -- board/fads Files specific to FADS boards -- board/flagadm Files specific to FLAGADM boards -- board/gen860t Files specific to GEN860T and GEN860T_SC boards -- board/genietv Files specific to GENIETV boards -- board/gth Files specific to GTH boards -- board/hermes Files specific to HERMES boards -- board/hymod Files specific to HYMOD boards -- board/icu862 Files specific to ICU862 boards -- board/ip860 Files specific to IP860 boards -- board/iphase4539 - Files specific to Interphase4539 boards -- board/ivm Files specific to IVMS8/IVML24 boards -- board/lantec Files specific to LANTEC boards -- board/lwmon Files specific to LWMON boards -- board/mbx8xx Files specific to MBX boards -- board/mpc8260ads - Files specific to MMPC8260ADS boards -- board/mpl/ Files specific to boards manufactured by MPL -- board/mpl/common Common files for MPL boards -- board/mpl/pip405 Files specific to PIP405 boards -- board/mpl/mip405 Files specific to MIP405 boards -- board/musenki Files specific to MUSEKNI boards -- board/mvs1 Files specific to MVS1 boards -- board/nx823 Files specific to NX823 boards -- board/oxc Files specific to OXC boards -- board/omap1510inn - Files specific to OMAP 1510 Innovator boards -- board/pcippc2 Files specific to PCIPPC2/PCIPPC6 boards -- board/pm826 Files specific to PM826 boards -- board/ppmc8260 - Files specific to PPMC8260 boards -- board/rpxsuper - Files specific to RPXsuper boards -- board/rsdproto - Files specific to RSDproto boards -- board/sandpoint - Files specific to Sandpoint boards -- board/sbc8260 Files specific to SBC8260 boards -- board/sacsng Files specific to SACSng boards -- board/siemens Files specific to boards manufactured by Siemens AG -- board/siemens/CCM Files specific to CCM boards -- board/siemens/IAD210 Files specific to IAD210 boards -- board/siemens/SCM Files specific to SCM boards -- board/siemens/pcu_e Files specific to PCU_E boards -- board/sixnet Files specific to SIXNET boards -- board/spd8xx Files specific to SPD8xxTS boards -- board/tqm8260 Files specific to TQM8260 boards -- board/tqm8xx Files specific to TQM8xxL boards -- board/w7o Files specific to W7O boards -- board/walnut405 - Files specific to Walnut405 boards -- board/westel/ Files specific to boards manufactured by Westel Wireless -- board/westel/amx860 Files specific to AMX860 boards -- board/utx8245 Files specific to UTX8245 boards - Software Configuration: ======================= @@ -300,9 +231,12 @@ The following options need to be configured: ------------------- CONFIG_MPC823, CONFIG_MPC850, CONFIG_MPC855, CONFIG_MPC860 or CONFIG_MPC5xx + or CONFIG_MPC8220 or CONFIG_MPC824X, CONFIG_MPC8260 + or CONFIG_MPC85xx or CONFIG_IOP480 or CONFIG_405GP + or CONFIG_405EP or CONFIG_440 or CONFIG_MPC74xx or CONFIG_750FX @@ -313,53 +247,78 @@ The following options need to be configured: CONFIG_ARM7 CONFIG_PXA250 + MicroBlaze based CPUs: + ---------------------- + CONFIG_MICROBLAZE + + Nios-2 based CPUs: + ---------------------- + CONFIG_NIOS2 + - Board Type: Define exactly one of PowerPC based boards: --------------------- - CONFIG_ADCIOP, CONFIG_ICU862 CONFIG_RPXsuper, - CONFIG_ADS860, CONFIG_IP860, CONFIG_SM850, - CONFIG_AMX860, CONFIG_IPHASE4539, CONFIG_SPD823TS, - CONFIG_AR405, CONFIG_IVML24, CONFIG_SXNI855T, - CONFIG_BAB7xx, CONFIG_IVML24_128, CONFIG_Sandpoint8240, - CONFIG_CANBT, CONFIG_IVML24_256, CONFIG_Sandpoint8245, - CONFIG_CCM, CONFIG_IVMS8, CONFIG_TQM823L, - CONFIG_CPCI405, CONFIG_IVMS8_128, CONFIG_TQM850L, - CONFIG_CPCI4052, CONFIG_IVMS8_256, CONFIG_TQM855L, - CONFIG_CPCIISER4, CONFIG_LANTEC, CONFIG_TQM860L, - CONFIG_CPU86, CONFIG_MBX, CONFIG_TQM8260, - CONFIG_CRAYL1, CONFIG_MBX860T, CONFIG_TTTech, - CONFIG_CU824, CONFIG_MHPC, CONFIG_UTX8245, - CONFIG_DASA_SIM, CONFIG_MIP405, CONFIG_W7OLMC, - CONFIG_DU405, CONFIG_MOUSSE, CONFIG_W7OLMG, - CONFIG_ELPPC, CONFIG_MPC8260ADS, CONFIG_WALNUT405, - CONFIG_ERIC, CONFIG_MUSENKI, CONFIG_ZUMA, - CONFIG_ESTEEM192E, CONFIG_MVS1, CONFIG_c2mon, - CONFIG_ETX094, CONFIG_NX823, CONFIG_cogent_mpc8260, - CONFIG_EVB64260, CONFIG_OCRTC, CONFIG_cogent_mpc8xx, - CONFIG_FADS823, CONFIG_ORSG, CONFIG_ep8260, - CONFIG_FADS850SAR, CONFIG_OXC, CONFIG_gw8260, - CONFIG_FADS860T, CONFIG_PCI405, CONFIG_hermes, - CONFIG_FLAGADM, CONFIG_PCIPPC2, CONFIG_hymod, - CONFIG_FPS850L, CONFIG_PCIPPC6, CONFIG_lwmon, - CONFIG_GEN860T, CONFIG_PIP405, CONFIG_pcu_e, - CONFIG_GENIETV, CONFIG_PM826, CONFIG_ppmc8260, - CONFIG_GTH, CONFIG_RPXClassic, CONFIG_rsdproto, - CONFIG_IAD210, CONFIG_RPXlite, CONFIG_sbc8260, - CONFIG_EBONY, CONFIG_sacsng, CONFIG_FPS860L, - CONFIG_V37, CONFIG_ELPT860, CONFIG_CMI, - CONFIG_NETVIA, CONFIG_RBC823 + CONFIG_ADCIOP CONFIG_GEN860T CONFIG_PCI405 + CONFIG_ADS860 CONFIG_GENIETV CONFIG_PCIPPC2 + CONFIG_AMX860 CONFIG_GTH CONFIG_PCIPPC6 + CONFIG_AR405 CONFIG_gw8260 CONFIG_pcu_e + CONFIG_BAB7xx CONFIG_hermes CONFIG_PIP405 + CONFIG_c2mon CONFIG_hymod CONFIG_PM826 + CONFIG_CANBT CONFIG_IAD210 CONFIG_ppmc8260 + CONFIG_CCM CONFIG_ICU862 CONFIG_QS823 + CONFIG_CMI CONFIG_IP860 CONFIG_QS850 + CONFIG_cogent_mpc8260 CONFIG_IPHASE4539 CONFIG_QS860T + CONFIG_cogent_mpc8xx CONFIG_IVML24 CONFIG_RBC823 + CONFIG_CPCI405 CONFIG_IVML24_128 CONFIG_RPXClassic + CONFIG_CPCI4052 CONFIG_IVML24_256 CONFIG_RPXlite + CONFIG_CPCIISER4 CONFIG_IVMS8 CONFIG_RPXsuper + CONFIG_CPU86 CONFIG_IVMS8_128 CONFIG_rsdproto + CONFIG_CRAYL1 CONFIG_IVMS8_256 CONFIG_sacsng + CONFIG_CSB272 CONFIG_JSE CONFIG_Sandpoint8240 + CONFIG_CU824 CONFIG_LANTEC CONFIG_Sandpoint8245 + CONFIG_DASA_SIM CONFIG_lwmon CONFIG_sbc8260 + CONFIG_DB64360 CONFIG_MBX CONFIG_sbc8560 + CONFIG_DB64460 CONFIG_MBX860T CONFIG_SM850 + CONFIG_DU405 CONFIG_MHPC CONFIG_SPD823TS + CONFIG_DUET_ADS CONFIG_MIP405 CONFIG_STXGP3 + CONFIG_EBONY CONFIG_MOUSSE CONFIG_SXNI855T + CONFIG_ELPPC CONFIG_MPC8260ADS CONFIG_TQM823L + CONFIG_ELPT860 CONFIG_MPC8540ADS CONFIG_TQM8260 + CONFIG_ep8260 CONFIG_MPC8560ADS CONFIG_TQM850L + CONFIG_ERIC CONFIG_MUSENKI CONFIG_TQM855L + CONFIG_ESTEEM192E CONFIG_MVS1 CONFIG_TQM860L + CONFIG_ETX094 CONFIG_NETPHONE CONFIG_TTTech + CONFIG_EVB64260 CONFIG_NETTA CONFIG_UTX8245 + CONFIG_FADS823 CONFIG_NETVIA CONFIG_V37 + CONFIG_FADS850SAR CONFIG_NX823 CONFIG_W7OLMC + CONFIG_FADS860T CONFIG_OCRTC CONFIG_W7OLMG + CONFIG_FLAGADM CONFIG_ORSG CONFIG_WALNUT405 + CONFIG_FPS850L CONFIG_OXC CONFIG_ZPC1900 + CONFIG_FPS860L CONFIG_ZUMA ARM based boards: ----------------- - CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312, - CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK, - CONFIG_INNOVATOROMAP1510, - CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410, - CONFIG_TRAB, CONFIG_AT91RM9200DK + CONFIG_AT91RM9200DK, CONFIG_CERF250, CONFIG_DNP1110, + CONFIG_EP7312, CONFIG_H2_OMAP1610, CONFIG_HHP_CRADLE, + CONFIG_IMPA7, CONFIG_INNOVATOROMAP1510, CONFIG_INNOVATOROMAP1610, + CONFIG_LART, CONFIG_LPD7A400 CONFIG_LUBBOCK, + CONFIG_OSK_OMAP5912, CONFIG_OMAP2420H4, CONFIG_SHANNON, + CONFIG_P2_OMAP730, CONFIG_SMDK2400, CONFIG_SMDK2410, + CONFIG_TRAB, CONFIG_VCMA9 + + MicroBlaze based boards: + ------------------------ + + CONFIG_SUZAKU + + Nios-2 based boards: + ------------------------ + + CONFIG_PCI5441 CONFIG_PK1C20 - CPU Module Type: (if CONFIG_COGENT is defined) @@ -383,16 +342,42 @@ The following options need to be configured: the lcd display every second with a "rotator" |\-/|\-/ -- MPC824X Family Member (if CONFIG_MPC824X is defined) - Define exactly one of - CONFIG_MPC8240, CONFIG_MPC8245 - -- 8xx CPU Options: (if using an 8xx cpu) - Define one or more of - CONFIG_8xx_GCLK_FREQ - if get_gclk_freq() can not work e.g. - no 32KHz reference PIT/RTC clock +- Board flavour: (if CONFIG_MPC8260ADS is defined) + CONFIG_ADSTYPE + Possible values are: + CFG_8260ADS - original MPC8260ADS + CFG_8266ADS - MPC8266ADS + CFG_PQ2FADS - PQ2FADS-ZU or PQ2FADS-VR + CFG_8272ADS - MPC8272ADS -- Clock Interface: +- MPC824X Family Member (if CONFIG_MPC824X is defined) + Define exactly one of + CONFIG_MPC8240, CONFIG_MPC8245 + +- 8xx CPU Options: (if using an MPC8xx cpu) + CONFIG_8xx_GCLK_FREQ - deprecated: CPU clock if + get_gclk_freq() cannot work + e.g. if there is no 32KHz + reference PIT/RTC clock + CONFIG_8xx_OSCLK - PLL input clock (either EXTCLK + or XTAL/EXTAL) + +- 859/866/885 CPU options: (if using a MPC859 or MPC866 or MPC885 CPU): + CFG_8xx_CPUCLK_MIN + CFG_8xx_CPUCLK_MAX + CONFIG_8xx_CPUCLK_DEFAULT + See doc/README.MPC866 + + CFG_MEASURE_CPUCLK + + Define this to measure the actual CPU clock instead + of relying on the correctness of the configured + values. Mostly useful for board bringup to make sure + the PLL is locked at the intended frequency. Note + that this requires a (stable) reference clock (32 kHz + RTC clock or CFG_8XX_XIN) + +- Linux Kernel Interface: CONFIG_CLOCKS_IN_MHZ U-Boot stores all clock information in Hz @@ -402,11 +387,37 @@ The following options need to be configured: "clocks_in_mhz" can be defined so that U-Boot converts clock data to MHZ before passing it to the Linux kernel. - When CONFIG_CLOCKS_IN_MHZ is defined, a definition of "clocks_in_mhz=1" is automatically included in the default environment. + CONFIG_MEMSIZE_IN_BYTES [relevant for MIPS only] + + When transfering memsize parameter to linux, some versions + expect it to be in bytes, others in MB. + Define CONFIG_MEMSIZE_IN_BYTES to make it in bytes. + +- Serial Ports: + CFG_PL010_SERIAL + + Define this if you want support for Amba PrimeCell PL010 UARTs. + + CFG_PL011_SERIAL + + Define this if you want support for Amba PrimeCell PL011 UARTs. + + CONFIG_PL011_CLOCK + + If you have Amba PrimeCell PL011 UARTs, set this variable to + the clock speed of the UARTs. + + CONFIG_PL01x_PORTS + + If you have Amba PrimeCell PL010 or PL011 UARTs on your board, + define this to a list of base addresses for each (supported) + port. See e.g. include/configs/versatile.h + + - Console Interface: Depending on board, define exactly one serial port (like CONFIG_8xx_CONS_SMC1, CONFIG_8xx_CONS_SMC2, @@ -429,11 +440,11 @@ The following options need to be configured: bit-blit (cf. smiLynxEM) VIDEO_VISIBLE_COLS visible pixel columns (cols=pitch) - VIDEO_VISIBLE_ROWS visible pixel rows - VIDEO_PIXEL_SIZE bytes per pixel + VIDEO_VISIBLE_ROWS visible pixel rows + VIDEO_PIXEL_SIZE bytes per pixel VIDEO_DATA_FORMAT graphic data format (0-5, cf. cfb_console.c) - VIDEO_FB_ADRS framebuffer address + VIDEO_FB_ADRS framebuffer address VIDEO_KBD_INIT_FCT keyboard int fct (i.e. i8042_kbd_init()) VIDEO_TSTC_FCT test char fct @@ -460,10 +471,16 @@ The following options need to be configured: default i/o. Serial console can be forced with environment 'console=serial'. + When CONFIG_SILENT_CONSOLE is defined, all console + messages (by U-Boot and Linux!) can be silenced with + the "silent" environment variable. See + doc/README.silent for more information. + - Console Baudrate: CONFIG_BAUDRATE - in bps Select one of the baudrates listed in CFG_BAUDRATE_TABLE, see below. + CFG_BRGCLK_PRESCALE, baudrate prescale - Interrupt driven serial port input: CONFIG_SERIAL_SOFTWARE_FIFO @@ -474,8 +491,8 @@ The following options need to be configured: (RTS/CTS) and UART's built-in FIFO. Set the number of bytes the interrupt driven input buffer should have. - Set to 0 to disable this feature (this is the default). - This will also disable hardware handshake. + Leave undefined to disable this feature, including + disable the buffer and hardware handshake. - Console UART Number: CONFIG_UART1_CONSOLE @@ -560,54 +577,72 @@ The following options need to be configured: #define enables commands: ------------------------- CFG_CMD_ASKENV * ask for env variable + CFG_CMD_AUTOSCRIPT Autoscript Support CFG_CMD_BDI bdinfo - CFG_CMD_BEDBUG Include BedBug Debugger + CFG_CMD_BEDBUG * Include BedBug Debugger + CFG_CMD_BMP * BMP support + CFG_CMD_BSP * Board specific commands CFG_CMD_BOOTD bootd - CFG_CMD_CACHE icache, dcache + CFG_CMD_CACHE * icache, dcache CFG_CMD_CONSOLE coninfo CFG_CMD_DATE * support for RTC, date/time... - CFG_CMD_DHCP DHCP support + CFG_CMD_DHCP * DHCP support + CFG_CMD_DIAG * Diagnostics + CFG_CMD_DOC * Disk-On-Chip Support + CFG_CMD_DTT * Digital Therm and Thermostat CFG_CMD_ECHO * echo arguments CFG_CMD_EEPROM * EEPROM read/write support - CFG_CMD_ELF bootelf, bootvx + CFG_CMD_ELF * bootelf, bootvx CFG_CMD_ENV saveenv CFG_CMD_FDC * Floppy Disk Support - CFG_CMD_FAT FAT partition support + CFG_CMD_FAT * FAT partition support CFG_CMD_FDOS * Dos diskette Support CFG_CMD_FLASH flinfo, erase, protect CFG_CMD_FPGA FPGA device initialization support + CFG_CMD_HWFLOW * RTS/CTS hw flow control CFG_CMD_I2C * I2C serial bus support CFG_CMD_IDE * IDE harddisk support CFG_CMD_IMI iminfo + CFG_CMD_IMLS List all found images CFG_CMD_IMMAP * IMMR dump support CFG_CMD_IRQ * irqinfo + CFG_CMD_ITEST Integer/string test of 2 values + CFG_CMD_JFFS2 * JFFS2 Support CFG_CMD_KGDB * kgdb CFG_CMD_LOADB loadb CFG_CMD_LOADS loads CFG_CMD_MEMORY md, mm, nm, mw, cp, cmp, crc, base, - loop, mtest - CFG_CMD_MMC MMC memory mapped support - CFG_CMD_MII MII utility commands + loop, loopw, mtest + CFG_CMD_MISC Misc functions like sleep etc + CFG_CMD_MMC * MMC memory mapped support + CFG_CMD_MII * MII utility commands + CFG_CMD_NAND * NAND support CFG_CMD_NET bootp, tftpboot, rarpboot CFG_CMD_PCI * pciinfo CFG_CMD_PCMCIA * PCMCIA support + CFG_CMD_PING * send ICMP ECHO_REQUEST to network host + CFG_CMD_PORTIO * Port I/O CFG_CMD_REGINFO * Register dump CFG_CMD_RUN run command in env variable + CFG_CMD_SAVES * save S record dump CFG_CMD_SCSI * SCSI Support + CFG_CMD_SDRAM * print SDRAM configuration information CFG_CMD_SETGETDCR Support for DCR Register access (4xx only) CFG_CMD_SPI * SPI serial bus support CFG_CMD_USB * USB support + CFG_CMD_VFD * VFD support (TRAB) CFG_CMD_BSP * Board SPecific functions + CFG_CMD_CDP * Cisco Discover Protocol support ----------------------------------------------- CFG_CMD_ALL all - CFG_CMD_DFL Default configuration; at the moment + CONFIG_CMD_DFL Default configuration; at the moment this is includes all commands, except the ones marked with "*" in the list above. If you don't define CONFIG_COMMANDS it defaults to - CFG_CMD_DFL in include/cmd_confdefs.h. A board can + CONFIG_CMD_DFL in include/cmd_confdefs.h. A board can override the default settings in the respective include file. @@ -632,7 +667,7 @@ The following options need to be configured: - Watchdog: CONFIG_WATCHDOG If this variable is defined, it enables watchdog - support. There must support in the platform specific + support. There must be support in the platform specific code for a watchdog. For the 8xx and 8260 CPUs, the SIU Watchdog feature is enabled in the SYPCR register. @@ -657,6 +692,7 @@ The following options need to be configured: CONFIG_RTC_DS1337 - use Maxim, Inc. DS1337 RTC CONFIG_RTC_DS1338 - use Maxim, Inc. DS1338 RTC CONFIG_RTC_DS164x - use Dallas DS164x RTC + CONFIG_RTC_MAX6900 - use Maxim, Inc. MAX6900 RTC Note that if the RTC uses I2C, then the I2C interface must also be configured. See I2C Support, below. @@ -677,16 +713,31 @@ The following options need to be configured: one partition type as well. - IDE Reset method: - CONFIG_IDE_RESET_ROUTINE + CONFIG_IDE_RESET_ROUTINE - this is defined in several + board configurations files but used nowhere! - Set this to define that instead of a reset Pin, the - routine ide_set_reset(int idereset) will be used. + CONFIG_IDE_RESET - is this is defined, IDE Reset will + be performed by calling the function + ide_set_reset(int reset) + which has to be defined in a board specific file - ATAPI Support: CONFIG_ATAPI Set this to enable ATAPI support. +- LBA48 Support + CONFIG_LBA48 + + Set this to enable support for disks larger than 137GB + Also look at CFG_64BIT_LBA ,CFG_64BIT_VSPRINTF and CFG_64BIT_STRTOUL + Whithout these , LBA48 support uses 32bit variables and will 'only' + support disks up to 2.1TB. + + CFG_64BIT_LBA: + When enabled, makes the IDE subsystem use 64bit sector addresses. + Default is 32bit. + - SCSI Support: At the moment only there is only support for the SYM53C8XX SCSI controller; define @@ -731,16 +782,37 @@ The following options need to be configured: CONFIG_LAN91C96_USE_32_BIT Define this to enable 32 bit addressing + CONFIG_DRIVER_SMC91111 + Support for SMSC's LAN91C111 chip + + CONFIG_SMC91111_BASE + Define this to hold the physical address + of the device (I/O space) + + CONFIG_SMC_USE_32_BIT + Define this if data bus is 32 bits + + CONFIG_SMC_USE_IOFUNCS + Define this to use i/o functions instead of macros + (some hardware wont work with macros) + - USB Support: At the moment only the UHCI host controller is - supported (PIP405, MIP405); define + supported (PIP405, MIP405, MPC5200); define CONFIG_USB_UHCI to enable it. define CONFIG_USB_KEYBOARD to enable the USB Keyboard - end define CONFIG_USB_STORAGE to enable the USB + and define CONFIG_USB_STORAGE to enable the USB storage devices. Note: Supported are USB Keyboards and USB Floppy drives (TEAC FD-05PUB). + MPC5200 USB requires additional defines: + CONFIG_USB_CLOCK + for 528 MHz Clock: 0x0001bbbb + CONFIG_USB_CONFIG + for differential drivers: 0x00001000 + for single ended drivers: 0x00005000 + - MMC Support: The MMC controller on the Intel PXA is supported. To @@ -750,6 +822,24 @@ The following options need to be configured: enabled with CFG_CMD_MMC. The MMC driver also works with the FAT fs. This is enabled with CFG_CMD_FAT. +- Journaling Flash filesystem support: + CONFIG_JFFS2_NAND, CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE, + CONFIG_JFFS2_NAND_DEV + Define these for a default partition on a NAND device + + CFG_JFFS2_FIRST_SECTOR, + CFG_JFFS2_FIRST_BANK, CFG_JFFS2_NUM_BANKS + Define these for a default partition on a NOR device + + CFG_JFFS_CUSTOM_PART + Define this to create an own partition. You have to provide a + function struct part_info* jffs2_part_info(int part_num) + + If you define only one JFFS2 partition you may also want to + #define CFG_JFFS_SINGLE_PART 1 + to disable the command chpart. This is the default when you + have not defined a custom partition + - Keyboard Support: CONFIG_ISA_KEYBOARD @@ -773,17 +863,30 @@ The following options need to be configured: Enable Chips & Technologies 69000 Video chip CONFIG_VIDEO_SMI_LYNXEM - Enable Silicon Motion SMI 712/710/810 Video chip - Videomode are selected via environment 'videomode' with - standard LiLo mode numbers. - Following modes are supported (* is default): - - 800x600 1024x768 1280x1024 - 256 (8bit) 303* 305 307 - 65536 (16bit) 314 317 31a - 16,7 Mill (24bit) 315 318 31b + Enable Silicon Motion SMI 712/710/810 Video chip. The + video output is selected via environment 'videoout' + (1 = LCD and 2 = CRT). If videoout is undefined, CRT is + assumed. + + For the CT69000 and SMI_LYNXEM drivers, videomode is + selected via environment 'videomode'. Two diferent ways + are possible: + - "videomode=num" 'num' is a standard LiLo mode numbers. + Following standard modes are supported (* is default): + + Colors 640x480 800x600 1024x768 1152x864 1280x1024 + -------------+--------------------------------------------- + 8 bits | 0x301* 0x303 0x305 0x161 0x307 + 15 bits | 0x310 0x313 0x316 0x162 0x319 + 16 bits | 0x311 0x314 0x317 0x163 0x31A + 24 bits | 0x312 0x315 0x318 ? 0x31B + -------------+--------------------------------------------- (i.e. setenv videomode 317; saveenv; reset;) + - "videomode=bootargs" all the video parameters are parsed + from the bootargs. (See drivers/videomodes.c) + + CONFIG_VIDEO_SED13806 Enable Epson SED13806 driver. This driver supports 8bpp and 16bpp modes defined by CONFIG_VIDEO_SED13806_8BPP @@ -803,13 +906,18 @@ The following options need to be configured: display); also select one of the supported displays by defining one of these: - CONFIG_NEC_NL6648AC33: + CONFIG_NEC_NL6448AC33: - NEC NL6648AC33-18. Active, color, single scan. + NEC NL6448AC33-18. Active, color, single scan. - CONFIG_NEC_NL6648BC20 + CONFIG_NEC_NL6448BC20 - NEC NL6648BC20-08. 6.5", 640x480. + NEC NL6448BC20-08. 6.5", 640x480. + Active, color, single scan. + + CONFIG_NEC_NL6448BC33_54 + + NEC NL6448BC33-54. 10.4", 640x480. Active, color, single scan. CONFIG_SHARP_16x9 @@ -840,17 +948,53 @@ The following options need to be configured: Normally display is black on white background; define CFG_WHITE_ON_BLACK to get it inverted. -- Spash Screen Support: CONFIG_SPLASH_SCREEN +- Splash Screen Support: CONFIG_SPLASH_SCREEN If this option is set, the environment is checked for a variable "splashimage". If found, the usual display of logo, copyright and system information on the LCD - is supressed and the BMP image at the address + is suppressed and the BMP image at the address specified in "splashimage" is loaded instead. The console is redirected to the "nulldev", too. This allows for a "silent" boot where a splash screen is loaded very quickly after power-on. +- Compression support: + CONFIG_BZIP2 + + If this option is set, support for bzip2 compressed + images is included. If not, only uncompressed and gzip + compressed images are supported. + + NOTE: the bzip2 algorithm requires a lot of RAM, so + the malloc area (as defined by CFG_MALLOC_LEN) should + be at least 4MB. + +- MII/PHY support: + CONFIG_PHY_ADDR + + The address of PHY on MII bus. + + CONFIG_PHY_CLOCK_FREQ (ppc4xx) + + The clock frequency of the MII bus + + CONFIG_PHY_GIGE + + If this option is set, support for speed/duplex + detection of Gigabit PHY is included. + + CONFIG_PHY_RESET_DELAY + + Some PHY like Intel LXT971A need extra delay after + reset before any MII register access is possible. + For such PHY, set this option to the usec delay + required. (minimum 300usec for LXT971A) + + CONFIG_PHY_CMD_DELAY (ppc4xx) + + Some PHY like Intel LXT971A need extra delay after + command issued before MII status register can be read - Ethernet address: CONFIG_ETHADDR @@ -893,6 +1037,71 @@ The following options need to be configured: 4th and following BOOTP requests: delay 0 ... 8 sec +- DHCP Advanced Options: + CONFIG_BOOTP_MASK + + You can fine tune the DHCP functionality by adding + these flags to the CONFIG_BOOTP_MASK define: + + CONFIG_BOOTP_DNS2 - If a DHCP client requests the DNS + serverip from a DHCP server, it is possible that more + than one DNS serverip is offered to the client. + If CONFIG_BOOTP_DNS2 is enabled, the secondary DNS + serverip will be stored in the additional environment + variable "dnsip2". The first DNS serverip is always + stored in the variable "dnsip", when CONFIG_BOOTP_DNS + is added to the CONFIG_BOOTP_MASK. + + CONFIG_BOOTP_SEND_HOSTNAME - Some DHCP servers are capable + to do a dynamic update of a DNS server. To do this, they + need the hostname of the DHCP requester. + If CONFIG_BOOP_SEND_HOSTNAME is added to the + CONFIG_BOOTP_MASK, the content of the "hostname" + environment variable is passed as option 12 to + the DHCP server. + + - CDP Options: + CONFIG_CDP_DEVICE_ID + + The device id used in CDP trigger frames. + + CONFIG_CDP_DEVICE_ID_PREFIX + + A two character string which is prefixed to the MAC address + of the device. + + CONFIG_CDP_PORT_ID + + A printf format string which contains the ascii name of + the port. Normally is set to "eth%d" which sets + eth0 for the first ethernet, eth1 for the second etc. + + CONFIG_CDP_CAPABILITIES + + A 32bit integer which indicates the device capabilities; + 0x00000010 for a normal host which does not forwards. + + CONFIG_CDP_VERSION + + An ascii string containing the version of the software. + + CONFIG_CDP_PLATFORM + + An ascii string containing the name of the platform. + + CONFIG_CDP_TRIGGER + + A 32bit integer sent on the trigger. + + CONFIG_CDP_POWER_CONSUMPTION + + A 16bit integer containing the power consumption of the + device in .1 of milliwatts. + + CONFIG_CDP_APPLIANCE_VLAN_TYPE + + A byte containing the id of the VLAN. + - Status LED: CONFIG_STATUS_LED Several configurations allow to display the current @@ -922,7 +1131,7 @@ The following options need to be configured: clock chips. See common/cmd_i2c.c for a description of the command line interface. - CONFIG_HARD_I2C selects the CPM hardware driver for I2C. + CONFIG_HARD_I2C selects the CPM hardware driver for I2C. CONFIG_SOFT_I2C configures u-boot to use a software (aka bit-banging) driver instead of CPM or similar hardware @@ -952,7 +1161,7 @@ The following options need to be configured: (Optional). Any commands necessary to enable the I2C controller or configure ports. - eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) + eg: #define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL) I2C_PORT @@ -989,8 +1198,8 @@ The following options need to be configured: is FALSE, it clears it (low). eg: #define I2C_SDA(bit) \ - if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ - else immr->im_cpm.cp_pbdat &= ~PB_SDA + if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \ + else immr->im_cpm.cp_pbdat &= ~PB_SDA I2C_SCL(bit) @@ -998,8 +1207,8 @@ The following options need to be configured: is FALSE, it clears it (low). eg: #define I2C_SCL(bit) \ - if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ - else immr->im_cpm.cp_pbdat &= ~PB_SCL + if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \ + else immr->im_cpm.cp_pbdat &= ~PB_SCL I2C_DELAY @@ -1021,6 +1230,12 @@ The following options need to be configured: custom i2c_init_board() routine in boards/xxx/board.c is run early in the boot sequence. + CONFIG_I2CFAST (PPC405GP|PPC405EP only) + + This option enables configuration of bi_iic_fast[] flags + in u-boot bd_info structure based on u-boot environment + variable "i2cfast". (see also i2cfast) + - SPI Support: CONFIG_SPI Enables SPI driver (so far only tested with @@ -1048,60 +1263,6 @@ The following options need to be configured: CONFIG_FPGA - Used to specify the types of FPGA devices. For - example, - #define CONFIG_FPGA CFG_XILINX_VIRTEX2 - - CFG_FPGA_PROG_FEEDBACK - - Enable printing of hash marks during FPGA - configuration. - - CFG_FPGA_CHECK_BUSY - - Enable checks on FPGA configuration interface busy - status by the configuration function. This option - will require a board or device specific function to - be written. - - CONFIG_FPGA_DELAY - - If defined, a function that provides delays in the - FPGA configuration driver. - - CFG_FPGA_CHECK_CTRLC - - Allow Control-C to interrupt FPGA configuration - - CFG_FPGA_CHECK_ERROR - - Check for configuration errors during FPGA bitfile - loading. For example, abort during Virtex II - configuration if the INIT_B line goes low (which - indicated a CRC error). - - CFG_FPGA_WAIT_INIT - - Maximum time to wait for the INIT_B line to deassert - after PROB_B has been deasserted during a Virtex II - FPGA configuration sequence. The default time is 500 mS. - - CFG_FPGA_WAIT_BUSY - - Maximum time to wait for BUSY to deassert during - Virtex II FPGA configuration. The default is 5 mS. - - CFG_FPGA_WAIT_CONFIG - - Time to wait after FPGA configuration. The default is - 200 mS. - -- FPGA Support: CONFIG_FPGA_COUNT - - Specify the number of FPGA devices to support. - - CONFIG_FPGA - Used to specify the types of FPGA devices. For example, #define CONFIG_FPGA CFG_XILINX_VIRTEX2 @@ -1158,7 +1319,7 @@ The following options need to be configured: U-Boot considers the values of the environment variables "serial#" (Board Serial Number) and - "ethaddr" (Ethernet Address) to bb parameters that + "ethaddr" (Ethernet Address) to be parameters that are set once by the board vendor / manufacturer, and protects these variables from casual modification by the user. Once set, these variables are read-only, @@ -1229,6 +1390,10 @@ The following options need to be configured: default value of 5 is used. - Command Interpreter: + CFG_AUTO_COMPLETE + + Enable auto completion of commands using TAB. + CFG_HUSH_PARSER Define this variable to enable the "hush" shell (from @@ -1268,12 +1433,12 @@ The following options need to be configured: of the backslashes before semicolons and special symbols. -- Default Environment +- Default Environment: CONFIG_EXTRA_ENV_SETTINGS Define this to contain any number of null terminated strings (variable = value pairs) that will be part of - the default enviroment compiled into the boot image. + the default environment compiled into the boot image. For example, place something like this in your board's config file: @@ -1286,7 +1451,7 @@ The following options need to be configured: internal format how the environment is stored by the U-Boot code. This is NOT an official, exported interface! Although it is unlikely that this format - will change soon, but there is no guarantee either. + will change soon, there is no guarantee either. You better know what you are doing here. Note: overly (ab)use of the default environment is @@ -1294,14 +1459,28 @@ The following options need to be configured: the environment like the autoscript function or the boot command first. -- DataFlash Support +- DataFlash Support: CONFIG_HAS_DATAFLASH Defining this option enables DataFlash features and allows to read/write in Dataflash via the standard commands cp, md... -- Show boot progress +- SystemACE Support: + CONFIG_SYSTEMACE + + Adding this option adds support for Xilinx SystemACE + chips attached via some sort of local bus. The address + of the chip must alsh be defined in the + CFG_SYSTEMACE_BASE macro. For example: + + #define CONFIG_SYSTEMACE + #define CFG_SYSTEMACE_BASE 0xf0000000 + + When SystemACE support is added, the "ace" device type + becomes available to the fat commands, i.e. fatls. + +- Show boot progress: CONFIG_SHOW_BOOT_PROGRESS Defining this option allows to add some board- @@ -1313,11 +1492,11 @@ The following options need to be configured: Arg Where When 1 common/cmd_bootm.c before attempting to boot an image - -1 common/cmd_bootm.c Image header has bad magic number + -1 common/cmd_bootm.c Image header has bad magic number 2 common/cmd_bootm.c Image header has correct magic number - -2 common/cmd_bootm.c Image header has bad checksum + -2 common/cmd_bootm.c Image header has bad checksum 3 common/cmd_bootm.c Image header has correct checksum - -3 common/cmd_bootm.c Image data has bad checksum + -3 common/cmd_bootm.c Image data has bad checksum 4 common/cmd_bootm.c Image data has correct checksum -4 common/cmd_bootm.c Image is for unsupported architecture 5 common/cmd_bootm.c Architecture check OK @@ -1330,10 +1509,10 @@ The following options need to be configured: 8 common/cmd_bootm.c Image Type check OK -9 common/cmd_bootm.c Unsupported OS (not Linux, BSD, VxWorks, QNX) 9 common/cmd_bootm.c Start initial ramdisk verification - -10 common/cmd_bootm.c Ramdisk header has bad magic number - -11 common/cmd_bootm.c Ramdisk header has bad checksum + -10 common/cmd_bootm.c Ramdisk header has bad magic number + -11 common/cmd_bootm.c Ramdisk header has bad checksum 10 common/cmd_bootm.c Ramdisk header is OK - -12 common/cmd_bootm.c Ramdisk data has bad checksum + -12 common/cmd_bootm.c Ramdisk data has bad checksum 11 common/cmd_bootm.c Ramdisk data has correct checksum 12 common/cmd_bootm.c Ramdisk verification complete, start loading -13 common/cmd_bootm.c Wrong Image Type (not PPC Linux Ramdisk) @@ -1341,6 +1520,10 @@ The following options need to be configured: 14 common/cmd_bootm.c No initial ramdisk, no multifile, continue. 15 common/cmd_bootm.c All preparation done, transferring control to OS + -30 lib_ppc/board.c Fatal error, hang the system + -31 post/post.c POST test failed, detected by post_output_backlog() + -32 post/post.c POST test failed, detected by post_run_single() + -1 common/cmd_doc.c Bad usage of "doc" command -1 common/cmd_doc.c No boot device -1 common/cmd_doc.c Unknown Chip ID on boot device @@ -1355,7 +1538,13 @@ The following options need to be configured: -1 common/cmd_ide.c Read Error on boot device -1 common/cmd_ide.c Image header has bad magic number - -1 common/cmd_nvedit.c Environment not changable, but has bad CRC + -1 common/cmd_nand.c Bad usage of "nand" command + -1 common/cmd_nand.c No boot device + -1 common/cmd_nand.c Unknown Chip ID on boot device + -1 common/cmd_nand.c Read Error on boot device + -1 common/cmd_nand.c Image header has bad magic number + + -1 common/env_common.c Environment has a bad CRC, using default Modem Support: @@ -1375,6 +1564,19 @@ Modem Support: Enables debugging stuff (char screen[1024], dbg()) for modem support. Useful only with BDI2000. +- Interrupt support (PPC): + + There are common interrupt_init() and timer_interrupt() + for all PPC archs. interrupt_init() calls interrupt_init_cpu() + for cpu specific initialization. interrupt_init_cpu() + should set decrementer_count to appropriate value. If + cpu resets decrementer automatically after interrupt + (ppc4xx) it should set decrementer_count to zero. + timer_interrupt() calls timer_interrupt_cpu() for cpu + specific handling. If board has watchdog / status_led + / other_activity_monitor it works automatically from + general timer_interrupt(). + - General: In the target system modem support is enabled when a @@ -1437,6 +1639,10 @@ Configuration Settings: - CFG_ALT_MEMTEST: Enable an alternate, more extensive memory test. +- CFG_MEMTEST_SCRATCH: + Scratch address used by the alternate memory test + You only need to set this if address zero isn't writeable + - CFG_TFTP_LOADADDR: Default load address for network file downloads @@ -1511,7 +1717,11 @@ Configuration Settings: - CFG_FLASH_CFI: Define if the flash driver uses extra elements in the - common flash structure for storing flash geometry + common flash structure for storing flash geometry. + +- CFG_FLASH_CFI_DRIVER + This option also enables the building of the cfi_flash driver + in the drivers directory - CFG_RX_ETH_BUFFER: Defines the number of ethernet receive buffers. On some @@ -1642,16 +1852,51 @@ to save the current settings. - CFG_EEPROM_PAGE_WRITE_DELAY_MS: If defined, the number of milliseconds to delay between - page writes. The default is zero milliseconds. + page writes. The default is zero milliseconds. - CFG_I2C_EEPROM_ADDR_LEN: The length in bytes of the EEPROM memory array address. Note that this is NOT the chip address length! + - CFG_I2C_EEPROM_ADDR_OVERFLOW: + EEPROM chips that implement "address overflow" are ones + like Catalyst 24WC04/08/16 which has 9/10/11 bits of + address and the extra bits end up in the "chip address" bit + slots. This makes a 24WC08 (1Kbyte) chip look like four 256 + byte chips. + + Note that we consider the length of the address field to + still be one byte because the extra address bits are hidden + in the chip address. + - CFG_EEPROM_SIZE: The size in bytes of the EEPROM device. +- CFG_ENV_IS_IN_DATAFLASH: + + Define this if you have a DataFlash memory device which you + want to use for the environment. + + - CFG_ENV_OFFSET: + - CFG_ENV_ADDR: + - CFG_ENV_SIZE: + + These three #defines specify the offset and size of the + environment area within the total memory of your DataFlash placed + at the specified address. + +- CFG_ENV_IS_IN_NAND: + + Define this if you have a NAND device which you want to use + for the environment. + + - CFG_ENV_OFFSET: + - CFG_ENV_SIZE: + + These two #defines specify the offset and size of the environment + area within the first NAND device. + - CFG_SPI_INIT_OFFSET Defines offset to the initial SPI buffer area in DPRAM. The @@ -1678,6 +1923,21 @@ Note: once the monitor has been relocated, then it will complain if the default environment is used; a new CRC is computed as soon as you use the "saveenv" command to store a valid environment. +- CFG_FAULT_ECHO_LINK_DOWN: + Echo the inverted Ethernet link state to the fault LED. + + Note: If this option is active, then CFG_FAULT_MII_ADDR + also needs to be defined. + +- CFG_FAULT_MII_ADDR: + MII address of the PHY to check for the Ethernet link state. + +- CFG_64BIT_VSPRINTF: + Makes vsprintf (and all *printf functions) support printing + of 64bit values by using the L quantifier + +- CFG_64BIT_STRTOUL: + Adds simple_strtoull that returns a 64bit value Low Level (hardware related) configuration options: --------------------------------------------------- @@ -1687,9 +1947,10 @@ Low Level (hardware related) configuration options: - CFG_DEFAULT_IMMR: Default address of the IMMR after system reset. - Needed on some 8260 systems (MPC8260ADS and RPXsuper) - to be able to adjust the position of the IMMR - register after a reset. + + Needed on some 8260 systems (MPC8260ADS, PQ2FADS-ZU, + and RPXsuper) to be able to adjust the position of + the IMMR register after a reset. - Floppy Disk Support: CFG_FDC_DRIVE_NUMBER @@ -1717,13 +1978,13 @@ Low Level (hardware related) configuration options: source code. It is used to make hardware dependant initializations. -- CFG_IMMR: Physical address of the Internal Memory Mapped - Register; DO NOT CHANGE! (11-4) - [MPC8xx systems only] +- CFG_IMMR: Physical address of the Internal Memory. + DO NOT CHANGE unless you know exactly what you're + doing! (11-4) [MPC8xx/82xx systems only] - CFG_INIT_RAM_ADDR: - Start address of memory area tha can be used for + Start address of memory area that can be used for initial data and stack; please note that this must be writable memory that is working WITHOUT special initialization, i. e. you CANNOT use normal RAM which @@ -1819,6 +2080,54 @@ Low Level (hardware related) configuration options: CFG_POCMR2_MASK_ATTRIB: (MPC826x only) Overrides the default PCI memory map in cpu/mpc8260/pci.c if set. +- CONFIG_ETHER_ON_FEC[12] + Define to enable FEC[12] on a 8xx series processor. + +- CONFIG_FEC[12]_PHY + Define to the hardcoded PHY address which corresponds + to the given FEC; i. e. + #define CONFIG_FEC1_PHY 4 + means that the PHY with address 4 is connected to FEC1 + + When set to -1, means to probe for first available. + +- CONFIG_FEC[12]_PHY_NORXERR + The PHY does not have a RXERR line (RMII only). + (so program the FEC to ignore it). + +- CONFIG_RMII + Enable RMII mode for all FECs. + Note that this is a global option, we can't + have one FEC in standard MII mode and another in RMII mode. + +- CONFIG_CRC32_VERIFY + Add a verify option to the crc32 command. + The syntax is: + + => crc32 -v
+ + Where address/count indicate a memory area + and crc32 is the correct crc32 which the + area should have. + +- CONFIG_LOOPW + Add the "loopw" memory command. This only takes effect if + the memory commands are activated globally (CFG_CMD_MEM). + +- CONFIG_MX_CYCLIC + Add the "mdc" and "mwc" memory commands. These are cyclic + "md/mw" commands. + Examples: + + => mdc.b 10 4 500 + This command will print 4 bytes (10,11,12,13) each 500 ms. + + => mwc.l 100 12345678 10 + This command will write 12345678 to address 100 all 10 ms. + + This only takes effect if the memory commands are activated + globally (CFG_CMD_MEM). + Building the Software: ====================== @@ -1837,7 +2146,7 @@ change it to: CROSS_COMPILE = ppc_4xx- -U-Boot is intended to be simple to build. After installing the +U-Boot is intended to be simple to build. After installing the sources you must configure U-Boot for one specific board type. This is done by typing: @@ -1846,56 +2155,50 @@ is done by typing: where "NAME_config" is the name of one of the existing configurations; the following names are supported: - ADCIOP_config GTH_config TQM850L_config - ADS860_config IP860_config TQM855L_config - AR405_config IVML24_config TQM860L_config - CANBT_config IVMS8_config WALNUT405_config - CPCI405_config LANTEC_config cogent_common_config - CPCIISER4_config MBX_config cogent_mpc8260_config - CU824_config MBX860T_config cogent_mpc8xx_config - ESTEEM192E_config RPXlite_config hermes_config - ETX094_config RPXsuper_config hymod_config - FADS823_config SM850_config lwmon_config - FADS850SAR_config SPD823TS_config pcu_e_config - FADS860T_config SXNI855T_config rsdproto_config - FPS850L_config Sandpoint8240_config sbc8260_config - GENIETV_config TQM823L_config PIP405_config - GEN860T_config EBONY_config FPS860L_config - ELPT860_config cmi_mpc5xx_config NETVIA_config - at91rm9200dk_config omap1510inn_config - -Note: for some board special configuration names may exist; check if - additional information is available from the board vendor; for - instance, the TQM8xxL systems run normally at 50 MHz and use a - SCC for 10baseT ethernet; there are also systems with 80 MHz - CPU clock, and an optional Fast Ethernet module is available - for CPU's with FEC. You can select such additional "features" + ADCIOP_config FPS860L_config omap730p2_config + ADS860_config GEN860T_config pcu_e_config + Alaska8220_config + AR405_config GENIETV_config PIP405_config + at91rm9200dk_config GTH_config QS823_config + CANBT_config hermes_config QS850_config + cmi_mpc5xx_config hymod_config QS860T_config + cogent_common_config IP860_config RPXlite_config + cogent_mpc8260_config IVML24_config RPXlite_DW_config + cogent_mpc8xx_config IVMS8_config RPXsuper_config + CPCI405_config JSE_config rsdproto_config + CPCIISER4_config LANTEC_config Sandpoint8240_config + csb272_config lwmon_config sbc8260_config + CU824_config MBX860T_config sbc8560_33_config + DUET_ADS_config MBX_config sbc8560_66_config + EBONY_config MPC8260ADS_config SM850_config + ELPT860_config MPC8540ADS_config SPD823TS_config + ESTEEM192E_config MPC8560ADS_config stxgp3_config + ETX094_config NETVIA_config SXNI855T_config + FADS823_config omap1510inn_config TQM823L_config + FADS850SAR_config omap1610h2_config TQM850L_config + FADS860T_config omap1610inn_config TQM855L_config + FPS850L_config omap5912osk_config TQM860L_config + omap2420h4_config WALNUT405_config + Yukon8220_config + ZPC1900_config + +Note: for some board special configuration names may exist; check if + additional information is available from the board vendor; for + instance, the TQM823L systems are available without (standard) + or with LCD support. You can select such additional "features" when chosing the configuration, i. e. - make TQM860L_config - - will configure for a plain TQM860L, i. e. 50MHz, no FEC - - make TQM860L_FEC_config - - will configure for a TQM860L at 50MHz with FEC for ethernet - - make TQM860L_80MHz_config - - will configure for a TQM860L at 80 MHz, with normal 10baseT - interface - - make TQM860L_FEC_80MHz_config - - will configure for a TQM860L at 80 MHz with FEC for ethernet + make TQM823L_config + - will configure for a plain TQM823L, i. e. no LCD support make TQM823L_LCD_config - will configure for a TQM823L with U-Boot console on LCD - make TQM823L_LCD_80MHz_config - - will configure for a TQM823L at 80 MHz with U-Boot console on LCD - etc. Finally, type "make all", and you should get some working U-Boot -images ready for downlod to / installation on your system: +images ready for download to / installation on your system: - "u-boot.bin" is a raw binary image - "u-boot" is an image in ELF binary format @@ -1914,7 +2217,7 @@ steps: 1. Add a new configuration option for your board to the toplevel "Makefile" and to the "MAKEALL" script, using the existing entries as examples. Note that here and at many other places - boards and other names are listed alphabetically sorted. Please + boards and other names are listed in alphabetical sort order. Please keep this order. 2. Create a new directory to hold your board specific code. Add any files you need. In your board directory, you will need at least @@ -1944,7 +2247,7 @@ cation did not break existing code. At least make sure that *ALL* of the supported boards compile WITHOUT ANY compiler warnings. To do so, just run the "MAKEALL" script, which will configure and build U-Boot for ALL supported system. Be warned, this will take a while. You can -select which (cross) compiler to use py passing a `CROSS_COMPILE' +select which (cross) compiler to use by passing a `CROSS_COMPILE' environment variable to the script, i. e. to use the cross tools from MontaVista's Hard Hat Linux you can type @@ -1978,15 +2281,15 @@ mw - memory write (fill) cp - memory copy cmp - memory compare crc32 - checksum calculation -imd - i2c memory display -imm - i2c memory modify (auto-incrementing) -inm - i2c memory modify (constant address) -imw - i2c memory write (fill) -icrc32 - i2c checksum calculation -iprobe - probe to discover valid I2C chip addresses -iloop - infinite loop on address range -isdram - print SDRAM configuration information -sspi - SPI utility commands +imd - i2c memory display +imm - i2c memory modify (auto-incrementing) +inm - i2c memory modify (constant address) +imw - i2c memory write (fill) +icrc32 - i2c checksum calculation +iprobe - probe to discover valid I2C chip addresses +iloop - infinite loop on address range +isdram - print SDRAM configuration information +sspi - SPI utility commands base - print or set address offset printenv- print environment variables setenv - set environment variables @@ -1999,6 +2302,7 @@ iminfo - print header information for application image coninfo - print console devices and informations ide - IDE sub-system loop - infinite loop on address range +loopw - infinite write loop on address range mtest - simple RAM test icache - enable or disable instruction cache dcache - enable or disable data cache @@ -2058,6 +2362,12 @@ Some configuration options can be set using Environment Variables: This can be used to load and uncompress arbitrary data. + i2cfast - (PPC405GP|PPC405EP only) + if set to 'y' configures Linux I2C driver for fast + mode (400kHZ). This environment variable is used in + initialization code. So, for changes to be effective + it must be saved and board must be reset. + initrd_high - restrict positioning of initrd images: If this variable is not set, initrd images will be copied to the highest possible address in RAM; this @@ -2071,10 +2381,10 @@ Some configuration options can be set using Environment Variables: does not overwrite the U-Boot stack and data). For instance, when you have a system with 16 MB - RAM, and want to reseve 4 MB from use by Linux, + RAM, and want to reserve 4 MB from use by Linux, you can do this by adding "mem=12M" to the value of the "bootargs" variable. However, now you must make - sure, that the initrd image is placed in the first + sure that the initrd image is placed in the first 12 MB as well - this can be done with setenv initrd_high 00c00000 @@ -2102,6 +2412,29 @@ Some configuration options can be set using Environment Variables: bootstopkey - see CONFIG_AUTOBOOT_STOP_STR + ethprime - When CONFIG_NET_MULTI is enabled controls which + interface is used first. + + ethact - When CONFIG_NET_MULTI is enabled controls which + interface is currently active. For example you + can do the following + + => setenv ethact FEC ETHERNET + => ping 192.168.0.1 # traffic sent on FEC ETHERNET + => setenv ethact SCC ETHERNET + => ping 10.0.0.1 # traffic sent on SCC ETHERNET + + netretry - When set to "no" each network operation will + either succeed or fail without retrying. + When set to "once" the network operation will + fail when all the available network interfaces + are tried once without success. + Useful on scripts which control the retry operation + themselves. + + vlan - When set to a value < 4095 the traffic over + ethernet is encapsulated/received over 802.1q + VLAN tagged frames. The following environment variables may be used and automatically updated by the network boot commands ("bootp" and "rarpboot"), @@ -2109,6 +2442,7 @@ depending the information provided by your boot server: bootfile - see above dnsip - IP address of your Domain Name Server + dnsip2 - IP address of your secondary Domain Name Server gatewayip - IP address of the Gateway (Router) to use hostname - Target hostname ipaddr - see above @@ -2142,8 +2476,8 @@ only effect after the next boot (yes, that's just like Windoze :-). Command Line Parsing: ===================== -There are two different command line parsers available with U-Boot: -the old "simple" one, and the much more pwerful "hush" shell: +There are two different command line parsers available with U-Boot: +the old "simple" one, and the much more powerful "hush" shell: Old, simple command line parser: -------------------------------- @@ -2184,9 +2518,9 @@ General rules: Note for Redundant Ethernet Interfaces: ======================================= -Some boards come with redundand ethernet interfaces; U-Boot supports +Some boards come with redundant ethernet interfaces; U-Boot supports such configurations and is capable of automatic selection of a -"working" interface when needed. MAC assignemnt works as follows: +"working" interface when needed. MAC assignment works as follows: Network interfaces are numbered eth0, eth1, eth2, ... Corresponding MAC addresses can be stored in the environment as "ethaddr" (=>eth0), @@ -2226,12 +2560,11 @@ defines the following image properties: * Target Operating System (Provisions for OpenBSD, NetBSD, FreeBSD, 4.4BSD, Linux, SVR4, Esix, Solaris, Irix, SCO, Dell, NCR, VxWorks, LynxOS, pSOS, QNX, RTEMS, ARTOS; - Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS). + Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, ARTOS, LynxOS). * Target CPU Architecture (Provisions for Alpha, ARM, Intel x86, - IA64, MIPS, MIPS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; - Currently supported: PowerPC). -* Compression Type (Provisions for uncompressed, gzip, bzip2; - Currently supported: uncompressed, gzip). + IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit; + Currently supported: ARM, Intel x86, MIPS, NIOS, PowerPC). +* Compression Type (uncompressed, gzip, bzip2) * Load Address * Entry Point * Image Name @@ -2246,21 +2579,21 @@ Linux Support: ============== Although U-Boot should support any OS or standalone application -easily, Linux has always been in the focus during the design of +easily, the main focus has always been on Linux during the design of U-Boot. U-Boot includes many features that so far have been part of some special "boot loader" code within the Linux kernel. Also, any "initrd" images to be used are no longer part of one big Linux image; instead, kernel and "initrd" are separate images. This implementation -serves serveral purposes: +serves several purposes: - the same features can be used for other OS or standalone applications (for instance: using compressed images to reduce the Flash memory footprint) - it becomes much easier to port new Linux kernel versions because - lots of low-level, hardware dependend stuff are done by U-Boot + lots of low-level, hardware dependent stuff are done by U-Boot - the same Linux kernel image can now be used with different "initrd" images; of course this also means that different kernel images can @@ -2315,7 +2648,7 @@ Example: make uImage The "uImage" build target uses a special tool (in 'tools/mkimage') to -encapsulate a compressed Linux kernel image with header information, +encapsulate a compressed Linux kernel image with header information, CRC32 checksum etc. for use with U-Boot. This is what we are doing: * build a standard "vmlinux" kernel image (in ELF binary format): @@ -2368,8 +2701,9 @@ from a "data file" which is used as image payload: -n ==> set image name to 'name' -d ==> use image data from 'datafile' -Right now, all Linux kernels use the same load address (0x00000000), -but the entry point address depends on the kernel version: +Right now, all Linux kernels for PowerPC systems use the same load +address (0x00000000), but the entry point address depends on the +kernel version: - 2.2.x kernels have the entry point at 0x0000000C, - 2.3.x and later kernels have the entry point at 0x00000000. @@ -2512,7 +2846,7 @@ parameters. You can check and modify this variable using the ... If you want to boot a Linux kernel with initial ram disk, you pass -the memory addreses of both the kernel and the initrd image (PPBCOOT +the memory addresses of both the kernel and the initrd image (PPBCOOT format!) to the "bootm" command: => imi 40100000 40200000 @@ -2692,7 +3026,7 @@ Hit 'q': Minicom warning: ================ -Over time, many people have reported problems when trying to used the +Over time, many people have reported problems when trying to use the "minicom" terminal emulation program for serial download. I (wd) consider minicom to be broken, and recommend not to use it. Under Unix, I recommend to use C-Kermit for general purpose use (and @@ -2702,9 +3036,9 @@ use "cu" for S-Record download ("loads" command). Nevertheless, if you absolutely want to use it try adding this configuration to your "File transfer protocols" section: - Name Program Name U/D FullScr IO-Red. Multi - X kermit /usr/bin/kermit -i -l %l -s Y U Y N N - Y kermit /usr/bin/kermit -i -l %l -r N D Y N N + Name Program Name U/D FullScr IO-Red. Multi + X kermit /usr/bin/kermit -i -l %l -s Y U Y N N + Y kermit /usr/bin/kermit -i -l %l -r N D Y N N NetBSD Notes: @@ -2760,7 +3094,7 @@ models provide on-chip memory (like the IMMR area on MPC8xx and MPC826x processors), on others (parts of) the data cache can be locked as (mis-) used as memory, etc. - Chris Hallinan posted a good summy of these issues to the + Chris Hallinan posted a good summary of these issues to the u-boot-users mailing list: Subject: RE: [U-Boot-Users] RE: More On Memory Bank x (nothingness)? @@ -2806,9 +3140,9 @@ code for the initialization procedures: * Do not use any unitialized global data (or implicitely initialized as zero data - BSS segment) at all - this is undefined, initiali- - zation is performed later (when relocationg to RAM). + zation is performed later (when relocating to RAM). -* Stack space is very limited. Avoid big data buffers or things like +* Stack space is very limited. Avoid big data buffers or things like that. Having only the stack as writable memory limits means we cannot use @@ -2821,7 +3155,7 @@ the GCC compiler (Global Register Variables) to share the data: we place a pointer (gd) to the global data into a register which we reserve for this purpose. -When chosing a register for such a purpose we are restricted by the +When choosing a register for such a purpose we are restricted by the relevant (E)ABI specifications for the current architecture, and by GCC's implementation. @@ -2829,7 +3163,7 @@ For PowerPC, the following registers have specific use: R1: stack pointer R2: TOC pointer R3-R4: parameter passing and return values - R5-R10: parameter passing + R5-R10: parameter passing R13: small data area pointer R30: GOT pointer R31: frame pointer @@ -2911,7 +3245,7 @@ System Initialization: In the reset configuration, U-Boot starts at the reset entry point (on most PowerPC systens at address 0x00000100). Because of the reset configuration for CS0# this is a mirror of the onboard Flash memory. -To be able to re-map memory U-Boot then jumps to it's link address. +To be able to re-map memory U-Boot then jumps to its link address. To be able to implement the initialization code in C, a (small!) initial stack is set up in the internal Dual Ported RAM (in case CPUs which provide such a feature like MPC8xx or MPC8260), or in a locked @@ -2927,7 +3261,7 @@ simple memory test is run that determines the size of the SDRAM banks. When there is more than one SDRAM bank, and the banks are of -different size, the larger is mapped first. For equal size, the first +different size, the largest is mapped first. For equal size, the first bank (CS2#) is mapped first. The first mapping is always for address 0x00000000, with any additional banks following immediately to create contiguous memory starting from 0. @@ -2972,7 +3306,7 @@ int main (int argc, char *argv[]) while (learning) { Read the README file in the top level directory; - Read http://www.denx.de/re/DPLG.html + Read http://www.denx.de/twiki/bin/view/DULG/Manual ; Read the source, Luke; } @@ -3016,6 +3350,13 @@ Please note that U-Boot is implemented in C (and to some small parts in Assembler); no C++ is used, so please do not use C++ style comments (//) in your code. +Please also stick to the following formatting rules: +- remove any trailing white space +- use TAB characters for indentation, not spaces +- make sure NOT to use DOS '\r\n' line feeds +- do not add more than 2 empty lines to source files +- do not add trailing empty lines to source files + Submissions which do not conform to the standards may be returned with a request to reformat the changes.